# PartData-20190716

DESCRIPTION:
BEARING, BOWL MIDDLE  #12 - P/N 10RJC-608


DESCRIPTION:
ADJUSTING NUT  (ITEM #3) - P/N 8MPVTP-006/36


DESCRIPTION:
MOTOR YLB200-2-4 (ITEM #5)  - P/N 37KW/4P


DESCRIPTION:
STUFFER PACKING CAP  (ITEM# 8) - P/N 6MPVTP-36


DESCRIPTION:
STUFFER PACKING BOX  (ITEM #9) - P/N 6MPVTP-32


DESCRIPTION:
MOTOR SHAFT  (ITEM #16) - P/N 10MPVTP-001A


DESCRIPTION:
SHORT PIPE  (ITEM #18) - P/N 10MPVTP-500/194F


DESCRIPTION:
IMPELLER, 17" DIA. 3V 400BHN - P/N 411744


DESCRIPTION:
DISCHARGE PIPE  (ITEM #22) - P/N 10MPVTP-400/194F


DESCRIPTION:
BOWL, UPPER  (ITEM #24) - P/N 10MPVTP-607A


DESCRIPTION:
BEARING  UPPER  (ITEM #25) - P/N 10MPVTP-604/36


DESCRIPTION:
SHAFT, IMPELLER  ITEM #26 - P/N 10MPVTP-603/36A


DESCRIPTION:
BOWL, MIDDLE  (ITEM #27) - P/N 10MPVTP-607


DESCRIPTION:
WEAR RING  (ITEM #31) - P/N 250MPVTP130-605


DESCRIPTION:
BEARING BOTTOM  (ITEM #32) - P/N 10MPVTP-611/36


DESCRIPTION:
BOWL BOTTOM  (ITEM #33) - P/N  10MPVTP-610


DESCRIPTION:
STAINER  (ITEM #34) - P/N 8MPVTP-700/6NPT


MISC:
SEAMLESS 0.06-0.13% CARBON, 0.025% PHOSPHORUS MAX, 0.006% SULPHUR MAX. 1.505 MAX O.D.

DESCRIPTION:
TUBE, 1.5" o.d. X 23' long x 2.77 min.wall.thkns. seamless A-214-5-8T

NOTES:
FREIGHT PER TUBE TO KINGSTON AS OF 5/9/2012 = $7.60 EACH


DESCRIPTION:
TUBE, 1.5" o.d. X 21' long x 2.77 min.wall.thkns. seamless A-214-5-8T


DESCRIPTION:
TUBE, 1.5 X 1.65mm X 30' DPLX SS GRADE 2304


DESCRIPTION:
COLLAPSING TOOL, ROUND SHANK, ROUND COLLAR


DESCRIPTION:
VALVE DISC LP VALVES ONLY  P/N 1002-2255-00


DESCRIPTION:
TUBE, 1.5" X 1.65mm X 23' LONG GRADE 2304 SS


DESCRIPTION:
TUBE, 1.5" o.d. X 30' long x 2.77 min.wall.thkns. seamless A-214-5-8T


DESCRIPTION:
IMPELLER, 22-1/2" DIA 400BHN 8V W/RINGS - P/N 312727


DESCRIPTION:
IMPELLER, 20-1/2" DIA., 400BHN W/RING - P/N 213717B


DESCRIPTION:
BEARING, ROLLER THRUST W/DRIVE SHAFT EXT.


DESCRIPTION:
GEARBOX SUMITOMO  - P/N EHYJ-B4110-Y-Y3-74


DESCRIPTION:
SCREW, 9" DIA X 4'-10' LONG SCREW W/3/16"


DESCRIPTION:
PACKING SETS, FLUID END  - P/N GAS-102854-000


DESCRIPTION:
COUPLING, SHAFT 100' DIA. - P/N D26444/8A


MISC:
STEEL PUG AND SPECIAL LUBRICANT Lomu + 410SS TRIM PTFE/VITON (FLOW SERVE LUBE

DESCRIPTION:
PLUGCOCK, 6" ANSI 125#FLNG FLT FACE, 733C FS LUBE


MISC:
VALVE IS A216WCB BODY WITH STEEL PUG AND SPECIAL LUBRICANT Lomu + 410SS TRIM PTFE/VITON


MISC:
VALVE IS STEEL PUG AND SPECIAL LUBRICANT Lomu + 410SS TRIM PTFE/VITON


MISC:
BAUXITE GRINDING MILLS 7 X 84 TYPE 1150T20


DESCRIPTION:
PUMP, BARE SHAFT VERTICAL 500gpm @ 40' @ 900rpm

NOTES:
REPLACES HAZELTON VNR 3-11 PUMP LENGTH 1298MM


MISC:
MODIFIED FOR INPRO SEAL #VBXXD-HH 65mm x 110mm MATERIAL 660BB


MISC:
VALVE IS CAST IRON PUG AND SPECIAL LUBRICANT Lomu + 410SS TRIM PTFE/VITON


DESCRIPTION:
SEAL, INPRO THRUST END  P/N 657-8751P-61


DESCRIPTION:
COLLAR, SPLIT, THRUST  P/N 663-0465B-00-OP40C


DESCRIPTION:
RING, SPRING RETAINER  P/N 66-7703P-03-00*


DESCRIPTION:
FLINGER, INT. LABYRINTH  P/N 655-2785C-00-04TEP


DESCRIPTION:
SEAL, SHAFT, FLANGE DBL. ROTOR (DRIVE END)


DESCRIPTION:
SEAL, SHAFT, FLANGE DBL. ROTOR (WET END)


DESCRIPTION:
VALVE, PLUG TYPE 300# C/WITH GEAR OPERATOR


MISC:
PTFE SLEEVED, FLUOROSEAL # PIECCE 152F WCB/316 ALCAN PROTECT V413 C/W DTF-468 GEAR

DESCRIPTION:
VALVE, 3" PLUG CIV GEAR OPERATOR W/HANDLE ASTM A216 150#


DESCRIPTION:
COUPLING, DRIVE HALF, FLEX TYPE DWG. G-3976


MISC:
NEW #48726 INVESTMENT CAST, OLD 39932 IN 317L MATERIAL


MISC:
BEARING LOCK WASHER #W-11 WASHER, PRECISION


DESCRIPTION:
CASING, W/PKG BOX 430BHN  - P/N 510342/7


DESCRIPTION:
PUMP, BARE SHAFT C/W CV MOUNT-BASE-GUARD


DESCRIPTION:
VALVE, BUTTERFLY DUPLEX 20MESH MONEL BSKT


DESCRIPTION:
PUMP SET, 1.3SG/Sludge, 165m3/h @ 63m 1450rpm 75KW

NOTES:
MOTOR #Y280S-4 SIZE 75KW 380V/50 CYCLE 1450RPM


DESCRIPTION:
PUMP SET, 70 m3/h @ 59m Motor 380v/50hz 1450rpm


MISC:
BEARING CONE SPACER, X45447 / Old#3397909120 /NYSTAR 1024844


MISC:
FOR 1-15/16" SHAFT PER BM-102-2 SIMILAR TO DRAWING 9184-J1/R1


NOTES:
PTFE SLEEVED, FLUOROSEAL #PIECE 152F WCB/316 ALCAN PROJECT V413 C/W DTF-468 GEAR OPERATOR WITH HANDLE ASTM A216, CLASS 150 CAST STEEL PLUG AND BODY. MARKING IN ENGLISH TO SHOW ON & OFF


DESCRIPTION:
NUT, LOCK / TUERCA,PRESION 524194-INTMPE


MISC:
IMPULSOR,BRONCE CONJUNTO / TUR-14DC-COL-STD ANSI/ASTM B148, ALLOY C95300, 10 7/8" TRIM WITH SEAL R


MISC:
BUSHING, THROATBUSH, RUBBER, F6083R26 / U/W-WARMAN PUMP 8X6-MDS7393


MISC:
to replace Outokumpu Tank Cell Agitator per their dwg DOC250615

NOTES:
Wet-end material is 316SS shaft and blade assembly.


MISC:
IMPULSOR, HULE URETANO /IMPELLER, 25396, 6-S-P URETHANE, / supplied #25349 natural rubber PHTSA#5440-P


MISC:
TO FIT ON SHAFT 1-15/16" DIAMETER 600009-H01/R3; old dwg#2066-C2,


MISC:
SCREEN, UPPER,  24007 -520 BLACK RUB / SCREEN, UPPER 2.5" -100 P/N 24007  PHTSA#5345-A


DESCRIPTION:
BUSHING, RUBBER , BS-2-3/16 (60 DUROMETER)


NOTES:
QUOTED PRICE IS FOR A COMPLETE GLAND SET( 2 HALFS), Sold $590(qty1) 8/18


MISC:
SEE DWG 2065-C2 FOR MATERIAL & TECHNICAL DETAILS


DESCRIPTION:
PLATE, SINGLE SCREEN CENTER,  GRADE 6020/85

NOTES:
Competition SET-PANEL,MOD, Central 1 OF 20 (FULL SET) $380 EA X 20=$7600


NOTES:
Competition Part # C16.1X50.1TN19081219FD30 (Set 5 Each $2100/ea)


MISC:
GOULDS 400 HP, Curve# 18BHC, PUMP, GOULDS(TURBINE ONLY)VIT-FF 3 STAGE SER:485999-1-2Y3 MOD.14X18BHC

NOTES:
Min 3 Max 6  12 month usage (0     ****** 70% increase on the cost for next orders 27th March 2019 ML*****


NOTES:
Min 1 Max 2  12 month usage SIC$3154.73(QTY2-12/17)


DESCRIPTION:
STUFFING BOX, BEARING 2.43X2.93X5.75.  IE4991109


MISC:
BALINERA,COLUMNA SIZE  1.93X2.93X600 MATERIAL TYPE B143-18


DESCRIPTION:
SCREW, GLAND ADJUSTING (CODE-2229 CAT #757)


DESCRIPTION:
TUBO, DESCHARGE / PIPE, DISCHARGE, #21877


DESCRIPTION:
TRASH PUMP KRS822L PERFORMANCE   30HP 4"


DESCRIPTION:
TRASH PUMP LH311W60 PERFORMANCE  15HP 4"


DESCRIPTION:
TRASH PUMP KTZ45.5-61 PERFORMANCE  7.5HP 4"


DESCRIPTION:
TRASH PUMP KTZ411-61 PERFORMANCE 15HP 4"


MISC:
STUD, FRAME PLATE ADPTR,M6Z3-35VC /SIZE 16mm x 35mm long with nut and flat washer.


MISC:
STUD, FRAME M12Z3-50VC/ GRADE 5 STEEL STUD 10MM X 50MM LONG WITH FLAT WASHER & NUT


MISC:
PORT ESQUIVEL CAUSTIC TANK CAR LOADING PUMP. MOTOR IS 415V 50HZ TEFC

NOTES:
TERMS: 50% ADV AND 30% ATS CHINA, BALANCE NET 30 DAYS. DELIVERY IS 5 WEEKS. NOTE: PRICE INCLUDES 20HP IP56 ENCLOSURE SEVERE DUTY IEEE 841 MOTOR.


DESCRIPTION:
PIPE, DISCHARGE D3SAA5026 / TUBO,DESCARGA


MISC:
CIV GEAR OPERATED PTFE SLEEVED, FLUOROSEAL #PIECE 152 F PROJECT V413 C/W DTF-468 GEAR OPERATOR + HANDLE

DESCRIPTION:
VALVE, STEEL PLUG  150# C/W GEAR OPERATOR


MISC:
RESISTANT TO ABRASSIN, VULCANIZED NATURAL RUBBER 55F

DESCRIPTION:
PUMP, BARE SHAFT C/W TEFC 15HP MTR 254T 1765RPM


DESCRIPTION:
PUMP, BARE SHAFT C/W TEFC 25HP MTR 284T 1775RPM


MISC:
HEAT PROOF, WATER PROOF, CORROSION PROOF


MISC:
1750RPM, Shaft power of pump at rated point: 269HP, 70% EFF 20'NPSHR


NOTES:
Gate Valve Specifications
VALVE TYPE: GATE VALVE
NOMINAL SIZE: NPS 2 R (DN 50 R)
PRESSURE RATING: CLASS 800 (PN 130)
END CONNECTION: THREADED
CONSTRUCTION: WEDGED, BOLTED BONNET
BODY AND/OR BONNET/COVER MATERIAL: A105
TRIM DESCRIPTION: 316/316/316
SEATINGSURFACE OF CLOSURE MEMBER
(DISC/GATE): 316
SEATING SURFACE OF BODY SEAT: 316
STEM: 316
CLOSURE MEMBER (DISC/GATE):
SEAT SEAL: METAL
OPERATION MODE: HANDWHEEL
REDUCED BORE, SOLID WEDGE, API 602 DESIGN,
F TO F=140MM.


DESCRIPTION:
SCREEN, BASKET 225 U/W-SIMFLO PUMP SER:86937-2 MODEL:ST14C-7 250HP


MISC:
sleeve bearing; 1-15/16 I.D., 3" O.D., 4-1/2 LONG BEARING HARDNESS IS 65-75 SHORE A

DESCRIPTION:
SLEEVE BEARING 21319-6-705 / RODAMIENTO, HULE


DESCRIPTION:
BOX, PACKING 3957130 U/W-JOHNSTON PUMP 250HP


DESCRIPTION:
NIPPLE, COLUMN 10"D.X59-3/4"LG., ORDER ON REQUEST BY END USER 11/08


DESCRIPTION:
NUT, 13NC -2 BRASS  1-15/16"  HW100912839  U/W-JOHNSTONE PUMP 250HP  1745254-SULZER


DESCRIPTION:
RING, LANTERN TURBINE PUMP 250HP MODEL TB-27382-83


DESCRIPTION:
GLAND,  PACKING  SPLIT  #2619-1  U/W-JOHNSTONE  VERTICAL PUMP  250HP.  SER: JY17452-54


DESCRIPTION:
SHAFT / EJE CALIBRADO,ACERO INOXIDABLE C1045


NOTES:
MIN 6, MAX 12, 1 YR Use 2, EBS$145 (QTY4-12/17). NOTHING PURCHASED SINCE JAN 2017


MISC:
IMPELLER COLLET / SEGURO IMPULSOR 1625-064  ; Material ASTM A36 - India

NOTES:
(15% QTY20). DrwG 600094-H01 drawn is for a Johnston 500HP, price I have is 81 USD for this part. (6/6/19)


DESCRIPTION:
PUMP, 250 HP @ 344 ft H(m), 2518 GPM, 20 FT NPSHr


MISC:
(ORIGINAL. MADE CHANGES TO 318MM Jan'18).


MISC:
Bearing, bowl intermediate is the same as bearing, bowl discharge. NTRN/GFT/PTFE changed to Leaded Bronze

DESCRIPTION:
BEARING, BOWL INTMD & DICHRG ASTM B140 LDDBRNZ

NOTES:
Grosvin confirmed all bowl bearings are the same for this pump.


DESCRIPTION:
SPIDER & BEARING  - NOT USED IN THIS PUMP


DESCRIPTION:
2" POLY VALVE DOUBLE DIAPHRAGM MINING PUMP - AFVMP50/PPPPP/HYT/HY/HY

NOTES:
AFVMP50/PPPPP/HYT/HY/HY - Model/Wetted Parts & Outer Pistons / Air Chambers / Center section / Air Valve / Diaphragms / Valve Balls / Valve Seats


DESCRIPTION:
MOTOR, 500HP 875RPM 117AMP 2300VOLTS (MILL 5)


MISC:
Quoted 511492, new motor chosen.  FRAMES 8211S, TESV. Type KAF

DESCRIPTION:
MOTOR, INDUCTION 500 HP 883 RPM 2300 VOLTS  GE MOTOR (RECONDITIONED)


MISC:
STUD IS M30 X 125MM LONG, BOLT, ADJUSTING 3NUT 2 WASHER D066ME62


MISC:
INCLUDES  1 AGITATOR _2 STABILIZERS 038MP-H01A

NOTES:
Quote from SINOMIN (TOTAL MOULD PRICE $10,000)


MISC:
FLOTATION MIXER (2 stabilizer segment  + 1 agitator). Metal Skeleton(Q235) covered R55

NOTES:
mould 65 days, parts 10 days; price $836.67 is for a complete stabilizer (2 SEGMENTS)


MISC:
FLOTATION MIXER (2 stabilizer segments + 1 agitator) Material Q235 covered with R55r @ 75 Shore A hardness.

NOTES:
mould 65 days, parts 10 days. P.O. Order6


MISC:
PLUG, PIPE ITEM 747 INSTALLED IN SUCTION BOWL BOTTOM


MISC:
EL MCHT-FORRO SUCCION LADIAL BOMBA (translation).  SAME AS A/C 98-231-071-5


DESCRIPTION:
BEARING, BOWL INTMD & DICHRG ASTM B140 LDDBRZ


MISC:
DENVER PART #503459 & 50184. OUTBOARD BRG. CAP


MISC:
SAME AS DENVER 504828.  FM- FORRO Lado SUCCION #2-174-5


MISC:
FM- FORRO MOTRIZ 3 X 3 SRL/ SAME AS DENVER


MISC:
SAME AS DENVER #504828  / FM-SG IMP NAT RUB CHECK 5X4-14 #98039047501


MISC:
SAME AS DENVER EXCEPT HUB THREADS ARE 2-1/2" - 4 THDS/IN ACME-2G  RH.

NOTES:
KAN WEE PRODUCES ONLY A05 MATERIAL, FOR RUBBER IMPELLER ORDER FROM PIPSA / IMPULSOR P/BOMBA SRL  8 X 6 X 18


MISC:
SAME AS DENVER #504503 / 98-231-071-501 / FM- FORRO SUCCION  3 X 3 SRL


MISC:
SAME AS DENVER#504874 / FORRO LADO ESTOPERO BOMBA SRL

DESCRIPTION:
LINER, GLAND SIDE 8X6 RUBBER 98-231-123-501


MISC:
SAME AS DENVER #504907 EXCEPT MATERIAL TYPE / FM- SU LINER NAT SFO 8X6-18 #98231120501

DESCRIPTION:
PLATE, SUCTION SIDE 8X6 RUBBER 98-231-120-501


MISC:
SAME AS DENVER #51826  (FORRO LADO ESTOPERO BOMBA SRL 8x10x21?)


OTHER AM:
$1022.15 SERVICIOS INDUSTRIALES MINEROS AP


DESCRIPTION:
IMPELLER, DRIVE END NATURAL RUBBER 45926


DESCRIPTION:
LOCK WASHER, BEARING OUTER BOARD 8910-0010


NOTES:
SELLO ACEITE #473239  OR GOULDS (3X3-10) Emili FMRFQ info


OTHER AM:
10.91   BOMBAS Y SUMINISTROS DEL NORTE SA D


MISC:
(42828?) SAME AS A/C#98-231-134-501 & DENVER #51825  EXCEPT MATERIAL / FORRO LADO SUCCION BOMBA


MISC:
F6015ME65 IS WRONG PART NUMBER. WARMAN CALLS THIS ITEM COVER PLATE BOLT WITH COST $110.70 IN 2000

OTHER AM:
630.60 PROVEEDORA DE SUPLEMENTOS Y SERVICI


MISC:
SIZE: 92MM X 85MM X 3.5MM THICK.  FM-O'RING DE FLECHA #E109S50 WARMAN 10x8


NOTES:
Terakhir:$460 ; Tyler $306; AoJin: $146.40 REVESTIMIENTO DEL PLATO DE LACUBIERTA  (Pump Size 6/4)


OTHER AM:
2,127.57 PROVEEDORA DE SUPLEMENTOS Y SERVICI


OTHER AM:
2181.00   PROVEEDORA DE SUPLEMENTOS Y SERVICIO


MISC:
FORRO L ESTOPERO WARM 8X6 SERIE A TIPO E


NOTES:
Tyler $820 06/16 IMPULSOR (6/4 Pump Size)


MISC:
TSSRBY50424B.  SEAL OIL GP1/DURCO3 GRUP1 #BY50424B-TSSR


MISC:
TSSRBY50424C,  SEAL OIL/DURCO3 GRUP2 #BY50424C-TSSR


MISC:
FOR PARTECH, SUPPLY IN 316L MATERIAL (98-236-104-001)/ FM-MANGA (GOULDS 5X4-14 SRL-C) #1-009-0

NOTES:
3.125" X 3.75" X 6.50" LONG, NEW A/C #SL-1601-316. HARD COATED #SL-1601-561, PRICE IS $578.00 FROM ADVANCED ENGINE.


MISC:
P/N 21814 / FM-PARRILLA INFER D3SRA5004 #21814


MISC:
FM-SELLO DE AGUA P/BOMBA 5 X 4  - 98-236-256-001


NOTES:
FOR FOB HOUSTON 40 FREIGHT, 30 CLEAN FEE, 40. PROFIT  / BRIDA SELLO MECANICO BBA GOULDS 1X2-10


OTHER AM:
$1168.20 SERVICIOS INDUSTRIALES MINEROS AP


NOTES:
NOTE: IMPELLER SAME AS DENVER #504978 EXCEPT HUB THREAD IS: 2-3/4" - 4 ACME -2G R.H.  / IMPULSOR P/BOMBA SRL 10 X 8"-


DESCRIPTION:
CASING, SUCTION SIDE STANDARD 5X4 503179


MISC:
FM- FORRO LADO ESTOPERO BOMBA SRL-C DE 8 X 6 / SAME AS A/C #98-231-123-501


MISC:
SAME AS A/C #98-231-120-501? EXCEPT MATERIAL TYPE

NOTES:
FORRO LADO ESTOPERO BOMBA SRL-C DE 8 X 6


MISC:
SAME AS A/C #98-231-120-501 EXCEPT MATERIAL TYPE / FM-FORRO LADO SUCCION BOMBA SRL-C DE 8 X 6


DESCRIPTION:
IMPELLER, METAL CHROME TALL 504886 NYRSTAR13


MISC:
MARK III GRP 2  1500 RPM  CAP100GPM       *** SAME # FITS MARK II MODEL 2X2R-10/100  & MARK II 2K2X1-10/73ARW ***


NOTES:
TERMS FOR PRICES FOB- ASIA PORT (not including tarrifs). Add Shipment, brokerage, tariffs costs.


MISC:
SAME AS DENVER IMPELLER EXCEPT HUB THREADS ARE 1-1/4" -12 UNF-2B R.H.

DESCRIPTION:
IMPELLER, OPEN 3X3 98-330-286-501 NELSON


MISC:
FM- DIST. DE AGUA / BOMBA 5 X 4 ( DGO ) / WATER SEAL MMP-01746 BBA


MISC:
FM- GLANDULA,FORRADA LADIAL / SAME AS A/C #98231070501


MISC:
SAME AS A/C #98-231-120-501 EXCEPT MATERIAL TYPE.  FM-FORRO LADO SUCCION P/BOM?


OTHER AM:
395.52 * 98-236-256-501?BOMBAS Y SUMINSTROS DEL NO


DESCRIPTION:
CASING, GLAND HALF STANDARD 98-431-797-501


NOTES:
MANGA BOMBA 8"X6"TIPO SRL-C ACERO D2 61RC 1045


MISC:
fm- COVER ASSY INB #98-331-936-801 BEARING

DESCRIPTION:
COVER, BEARING INBOARD 8X6 98-331-936-801


MISC:
FM-BUSHING THROAT #98233732001 BBA GOULDS


MISC:
FM-PLATO SUCCION P/BOMBA 10X8.  98-231-135-501


MISC:
R196MKM13 / FM-KIT DE REPARACION 13" X LT 1 #R196-MK13Z


MISC:
CASING GASKETS - FM-COVER GASKET/DURCO3 GRUPO1 #Y22774EA-TM


MISC:
FM-FORRO LADO ESTOPERO / BOMBA 5 X 4  /  504826?


NOTES:
Jan23/11 / WINDOW, SIGHT #A01154A05 BBA GOULDS. $30 SUMMIT (2005)


NOTES:
FLECHA #122 GOULDS 3X4-10 FMRFQ#03052017  Emili


MISC:
SAME AS DENVER P/N#47815, 504978 & SALA #47815 EXCEPT THREADS ON HUB ARE 2-3/4" -4 ACME -2G R.H.


OTHER AM:
$1314 - Servicios Industriales Mineros AP


MISC:
FM-AIR VALVE SCREEN #08250007 WILDEN T15


MISC:
FM-ASIENTO DE VALVULA BOMBA WILDEN T-15  / INDIA- "Ball Seat"

DESCRIPTION:
VALVE, SEAT COVER WILDEN T-15 15-1120-51


MISC:
FM-ABRAZADERA CHICA BOMBA WILDEN T-15 #15-7100-08


MISC:
FM-DIAFRAGMA AIR SIDE #15-1010 WILDEN T-15


MISC:
FM-GASKET CENTER BLOCK #04-3529-52   india #04-3529-51  "AIR CHAMBER GASKET"


MISC:
FM- PARTE DE ABAJO#15-5080-01. TRANSLATED- BOTTOM PART#15-5080-01


MISC:
FM-TORNILLO#15-6130-08 BBA   /  INDIA-AIR COVER BOLTS 15-6130-03


MISC:
SEAL OIL 1K /DURCO3 GRUP1 #BY50424G-TSSR


MISC:
**** #45138 is the core for #45136 Dry gland housing liner, and is not sold as a part.

OTHER AM:
$1308- Servicios Industriales Mineros AP


OTHER AM:
$206.25 INGENIERIA BEJAR PARA LA MINIERIA


MISC:
SELLO MECANICO #C2CPX1375ECXVB BBA DURCO


OTHER AM:
$439.75 MATERIALES ELECTRICOS DE DURANGO


MISC:
Back cover for housing/ Engine side cover

DESCRIPTION:
CUERPO, D/SOPORTE #RD11741A011003 P/N - BODY/FRAME SUPPORT


MISC:
FM-DISTRIBUIDOR DE AGUA BBA GOULDS 8X6-18


MISC:
FM-IMPELLER, ASSY W/TEFLON O-RING 4x6-17


MISC:
LOCKNUT I.E BEARING #120-1 NASH #BB-0054


DESCRIPTION:
LINER, CASING DRIVE SIDE RM250-013-26001


MISC:
FM-FORRO L ESTOPERO 5X4-14 SRL-C #2-174-0


MISC:
FORRO Lado SUCCION  5X4-14 SRL-C #2-174-5


MISC:
TAPA LADO BOMBA PARA BOMBA 3x3 / TAPA LADO ESTOPERO PARA BOMBA 3x3


DESCRIPTION:
BUSHING, CROSSHEAD PIN AXG229 BBA DUPLEX


OTHER AM:
113.40 PROVEEDORA DE SUPLEMENTOS Y SERVICIOS


MISC:
FM-MANIFOUL DESCARGA #08-5020-01 WILDEN M-8


MISC:
FM-SG-IMPELLER NAT #98211426501 2x2x10 SRL


DESCRIPTION:
COVER, STUFFING BOX TAPERED WITH FLOW MODIFIERS


MISC:
FM-KIT DE REPARACION XLT12 117 #R196XLRKOZ

OTHER AM:
532.32 BOMBAS Y SUMINISTROS DEL NORTE SA D


OTHER AM:
2,187.44  BOMBAS Y SUMINISTROS DEL NORTE


MISC:
FM-MANGA PARA BOMBA 5" X 4"  TIPO SRL / 98-331-958-808?


MISC:
FM - MANGA BOMBA 6"X6"TIPO SRL ACERO D2 61RC - ?98-331-958-8208?


# PartData20190808

DESCRIPTION:
GLAND, SPLIT - P/N G-1878 (CANADA PUMPS STANDARD 12A)


DESCRIPTION:
CASING - P/N 410394-5 (CANADA PUMPS STANDARD P/N 2)

OEM PART#:
P/N 410394-5 (CANADA PUMPS STANDARD P/N 2)


DESCRIPTION:
GLAND, SPLIT - P/N G-1253 (CANADA PUMPS STANDARD P/N 12A)

OEM PART#:
P/N G-1253 (CANADA PUMPS STANDARD P/N 12A)


DESCRIPTION:
SLEEVE, SHAFT PLASMA COATED - P/N 319344 (CANADA PUMPS STANDARD P/N 8)

OEM PART#:
P/N 319344 (CANADA PUMPS STANDARD P/N 8)


DESCRIPTION:
GLAND, SPLIT, C/W 4 BOLT - P/N 314781 (CANADA PUMPS STANDARD P/N 12A & 13A)

OEM PART#:
P/N 314781 (CANADA PUMPS STANDARD P/N 12A & 13A)


DESCRIPTION:
IMPELLER, 22" DIA 3V 400BHN W/RNG - P/N 314992 (CANADA PUMPS STANDARD P/N 3 & 3A)

OEM PART#:
P/N 314992 (CANADA PUMPS STANDARD P/N 3 & 3A)


DESCRIPTION:
SCREW, IMPELLER WEAR RING 49514-227-2229


DESCRIPTION:
IMPELLER, SUCTION 1ST STAGE 104-896-3BRZ


NOTES:
ALCOA DWG #001165.PDF   (ONE TIME PATTERN TOOLING = $687.50)


NOTES:
***NOTE: CHECK DWG#1214-J4 FOR LATEST REVISION BEFORE MANUFACTURING.***


NOTES:
***NOTE: CHECK DWG#1145-J4 FOR LATEST REVISION BEFORE MANUFACTURING.***


NOTES:
ALCOA DWG#001359.PDF   (ONE TIME PATTERN TOOLING = $375.00)


DESCRIPTION:
HOUSING, F004MD21 BEARING 10/8 FAH 12/10 FAH


MISC:
WEIR #G10041MA05 INCLUDES #G10026ME62 STUD & NUT


MISC:
CHANGES UP TO #F6041-19MA05 WHICH COMES WITH #E10026ME62 LINER STUD


MISC:
SIZE: 92MM X 85MM X 3.5MM THICK; GJZJAMJ0036870


NOTES:
FOR FOB HOUSTON 40 FREIGHT, 30 CLEAN FEE, 40. PROFIT


NOTES:
FOB HOUSTON - 120.00 GROUND
 FREIGHT,  CLEANING 45.00


NOTES:
FOR HOUSTON 120. FREIGHT, 45.00 CLEANING


NOTES:
NOTE: DRAWING NUMBER ASSIGNED, BUT NOT DRAWN YET. JS


MISC:
ALSO SAME STOCK NUMBER SHOWS P/N 046978G010-1228


DESCRIPTION:
BOWL ASSEMBLY, C/W STRAINER DEEP WELL - P/N 14JKH 11stage


NOTES:
1 TIME CHARGE, PATTERN TOOLING $4800.00 NET


DESCRIPTION:
RING, CASE WEAR NITRONIC 60SS  08111670010


DESCRIPTION:
HUB, STUFFINGF BOX COVER 051942G000-1002


MISC:
BEARING|BALL|SINGLE ROW|RADIAL THRUST|LIGHT(200) SERIES||||55 MM (2.1654 IN) BORE|100 MM (3.9370 IN) O.D.||CONRAD TYPE||21 MM (0.8266 IN) TH


DESCRIPTION:
PUMP, BARE SHAFT 550GPM 7-3/4" DIA. IMPELLER


MISC:
ASTMA216 WCB CARBON STEEL #0E00562A23-1212

NOTES:
SEE ASSEMBLED EXPLODED VIEW DRAWING 8001067-J3


DESCRIPTION:
NUT, STUD F.P.L. METRIC W/M20H12-Z; G10026ME62


DESCRIPTION:
SEAL, LABYRINTH BEARING ISOLATOR 5212851-8001


DESCRIPTION:
RING, RETAINING A06941A3-CRB STL ZING CTD


NOTES:
SUPPLY WITH OIL SIGHT GLASS & BOLTS & STUDS SHOWN ON THE DRAWING


MISC:
MED 300 75MM BORE 160MM OD 37MM THICK 7315BECBY


MISC:
GOULDS PUMPS INC., CASING GASKET, FIBER W/EPDM RUBBER


MISC:
FOR NUP-314ECP MODEL CYLINDERICAL ROLLER BEARING NUP-314ECP


MISC:
MOD 1X2-8SSH, POT WATER BOOSTER, SL. #C0153224, 1X28SSH


MISC:
MANDREL CUT RINGS, SEPCO ML5602 MATL 10GMA (28-2A) (38-3A)


MISC:
SHAFT SLEEVE TUNGSTEN CARB COAT PER AWA STD 611 DWG 10 GMA28


MISC:
CASTING BEARING ASSEMBLY, BUNA-N (NITRILE)


MISC:
150MM (5.9055 IN) BORE SPHERICAL 150SD22W33


MISC:
DISC THROAT COVER, 28% CHROME IRON, 10GMA-28


MISC:
WRAPFLEX, SZ 4545, 4 1/2 IN CLERANCE FIT BORE SZ 3400413


MISC:
FALK, 70R COUPLING SZ, WRAPFLEX R10 ELEMENT 3700221


MISC:
FALK, 70R SZ, 5 IN DIA (INTERFERENCE FIT)


MISC:
HEX HIGH TEMP, 1-8 UNC THRD STL, STD FINISHED ASSTM A194 GRADE 2H


MISC:
STUD 1 IN DIA, 8 IN L, 1-8 THRD, ASSTM A193-B7 HIGH TEMP FULL THRD L


MISC:
EMRSON 50 HP PRINTED CIRCUIT SNUBBER ANALOG 02-766390-01


MISC:
MANDREL CUT RINGS, SEPCO FOR MODEL 10GMA (28-2A) (38-3A) AL04GOU01


MISC:
7 IN BORE, 10 IN OD, 2 IN W, FLAT SEATS, RETAINER ROLLER 7OTP129


MISC:
GEN. PURPOSE, CEMENT, MULTIPURPOSE, ERD, TUBE 10.3 OZ RTV106


MISC:
GOULDS, CASTING, BEARING ASSEMBLY, BUNA-A (NITRILE)


MISC:
GOULDS, BLOW OFF, CARBON TEF LYNX901054B


MISC:
E70 COUPLING SZ, 1 IN BORE, 3535 TAPER LOCK BUSHING 840


MISC:
CLOSE COUPLED, E70 COUPLING SZ, 1/2 IN BORE, SOLID HUB, 700


MISC:
150MM (5.9055 IN) BORE, 270MM (10.6299 IN) OD, 96MM (3.7795 IN) W, SPHERICAL, STRG WITH 3 OIL HOLES, SELF-ALIGNING 23230W33


MISC:
180MM (7.0866 IN) BORE, 320MM (12.5984 IN) OD, 112 MM(4.4094 IN) W SPHERICL, STRG, SELF-ALIGNING 23236 C


MISC:
7 IN BORE, 12 IN OD, 2 IN W, FLAT SEATS, RETAINER, ROLLER 70TP131


MISC:
150MM (5.9055 IN) BORE, SPHERICAL WITH 3 OIL HOLES, 150SD22W33


MISC:
170MM (6.6929 IN) BORE, SPHERICAL WITH 3 OIL HOLES, 170SD22W33


MISC:
L:3-5/8 IN, SIZE 8, FOR AJAX COUPLING #3-5/8A WITH 10 HOLES FOR MORRIS PUMP


MISC:
FOR 12X14 M. OV. BLOW OFF PUMP DISCHARGE VALVE P/N 5116NSK


MISC:
BUNA-N (NITRILE) 5/16 IN I.D., 70 DURO, SOFT


MISC:
SINGLE ROW, ANGULAR CONTACT THRUST, MED (300), 60MM (2.3622 IN) BORE, 130MM (5.1181 IN) O.D, DUPLEX, 31MM (1.2205 IN) THICK, 7312DFDT


MISC:
60 MM(2.3622 IN) BORE, SPHERICAL, STRAIGHT WITH 3 OIL HOLES,  60SD23W33


MISC:
LANTERN RING, P/N 054291G0705159, GOULDS FOR 2RX, MORRIS PUMP S/N M8703-05


MISC:
GOULDS, 2RX, SHAFT SLEEVE, TUNGSTEN CARB COAT PER AWA SRD 611


MISC:
5-1/4 IN SHAFT DIA, 6-1/4 IN O.D. IN TH, A41, BUNA-N (NITRILE) 53X3059


MISC:
HORZ CENTRIFIGUAL, HUB DISC, RUBBER CLOTH INSERT,


MISC:
HORZ CENTRIFIGUAL, IMPELLER, ORGANIC FIBER,


DESCRIPTION:
DISC, 2JC14 HORIZONTAL CENTER 050388G000-1002


DESCRIPTION:
HUB, 3VJC14 VERTICAL SUMPS 051942G000-1002


MISC:
GOULDS, MODEL 3VJCA AND JC, AGITATOR ASSEMBLY, 8 IN SZ, BUNA-A (NITRILE) C02495A3835302


MISC:
FOR 12X14 M. OV. BLOW OFF PUMP DISCHARGE VALVE P/N 51309NSK


MISC:
MORRIS PUMPS INC, MANDREL CUT RINGS, SEPCO FOR MODEL 2 RXF (2X4) AL070MOR01


MISC:
GOULDS,3 X 4 X 10 EQUIP SZ,RETAINING,CS, 58101-393


MISC:
SINGLE ROW,RADIAL THRUST,MED(300),45 MM (1.7717 IN) BORE,100 MM (3.9370 IN) O.D.,CONRAD,25 MM (0.9843 IN) TH, 6309


MISC:
GOULDS,6 X 4-10 EQUIP SZ,MECHANICAL SEAL, ROTARY/STATRY,VITON MAT,INBOARD/OUTBOARD LABYRINTH, C02495A2245304


MISC:
GOULDS,MODEL 3316/M 13X4-116,LANTERN,TEFLON MATL, R76293 ITEM 105


MISC:
GOULDS,VANE (5),7-1/2 IN DIA,DI,W/ TEF O-RING,


MISC:
GOULDS,BEARING, OUTBOARD,CARBON FILLED TEF, D08717A46-6241


MISC:
6 IN PIPE,150 LB RATING,1/16 IN THICK,8-3/4 IN O.D.,NON-ASBESTOS,6-5/8 IN I.D.,


MISC:
8 IN PIPE,150 LB RATING,1/16 IN THICK,11 IN O.D.,NON-ASBESTOS,8-5/8 IN I.D.,


MISC:
DOUBLE ROW,ANGULAR CONTACT THRUST,MED(300),45 MM (1.7717 IN) BORE,100 MM (3.9370 IN) O.D.,1-9/16 IN TH, 5309AHC3


MISC:
GOULDS PUMPS INC,MANDREL CUT RINGS,SEPCO ML560 MATL,FOR MODEL 3196 XLT-X,(6X8-15) (8X10-13), AL04GOU05


MISC:
DOUBLE ROW,RADIAL THRUST,MEDIUM(300) SERIES, 83-36-98


MISC:
GOULDS,MODEL 3196 1XLTX 16 X 8-15XLTS,LANTERN,TEFLON MATL, R76298 ITEM 105


MISC:
GOULDS,8 X 10-13,BEARING, END,COUPLING END,


MISC:
GOULDS,8 X 10-13,BEARING, OUTBOARD,TEF, CARBON FILLED,WITH VITON 0-RING, D04584A07


MISC:
GOULDS,8 X 10-13,LABYRINTH, INBOARD,TEF CARBON, D08717A08


MISC:
12 X 14,45 DEG ANGLE KNOCKER,DWG A-58362,ITEM NO. 7,


MISC:
TO CONVERT 3196XLTX,8 X 10-13 PUMP TO 8 X 10-15,GOULDS P/N 70782 49


MISC:
GOULDS,OIL LUBRICATION, SEALED FRAME, A01113A02


MISC:
GOULDS, 2X3-14, AGITATOR ASSEMBLY, 8 IN, RETROFIT, C02495A1485302


MISC:
SINGLE ROW, ANGULAR CONTACT THRUST, 1/2 IN BORE, RADIAL 221RBD


MISC:
SINGLE ROW, ANGULAR CONTACT THRUST, 105MM (4.1339 IN) BORE, 190MM (7.4803 IN) O.D., DUPLEX, 40MM (1.5748 IN) TH, 7221DF


MISC:
SINGLE ROW, ANGULAR CONTACT THRUST, 120MM (4.7244 IN) BORE, 215MM (8.4646 IN), O.D., DUPLEX, 40MM (1.5748 IN) TH, 7224D


MISC:
120MM (4.716 IN), 12 TPI, 0.823 IN MAX TH MAX TH, RH THRD, 0.798 IN MIN TH MIN TH, AFBMA AN-24 SPEC


MISC:
AGITATOR DRAFT, 8 INCH, P/N C03042E0003201 FOR 8 IN AGITATOR ASSEMBLY, GOULDS VJC 4 X 6-14 SUMP PUMP, C03042E0003201


MISC:
GOULDS, PUMPSMART MOD PS200, 480 VAC, 157 AMP, 125 HP,


MISC:
GOULDS, MODEL 3196, 4X6-17 SZ, LAB SEAL, O-RING, BUNA-N, C02495A1465304


MISC:
GOULDS, MODEL 3196, 4X6-17 SZ, LAB SEAL O-RING, VITON, AS568-230, C02495A2305304


MISC:
GOULDS, MODEL 3196, 4X6-17 SZ, LAB SEAL O-RING, BUNA-A, C02495A415302


MISC:
GOULDS, MODEL 3196, 4X6-17 SZ, LABYRINTH SEAL, O-RING, C02495A2295304


MISC:
GOULDS, MODEL 3196, 4X6-17 SZ, ADAPTER GASKET, VELLUMOID, 73078-5163


MISC:
GOULDS, MODEL 3196, 4X6-17 SZ, INBOARD LABYRINTH SEAL,


MISC:
GOULDS, MODEL 3196, 4X6-17 SZ, OUTBOARD LABYRINTH SEAL, A04951A23


MISC:
GOULDS, MODEL 3196, 4X6-17 SZ, OUTBOARD BALL BEARING, 8049-31300


MISC:
GOULDS, MODEL 3196, 4X6-17 SZ, IMPELLER O-RING, TEFLON, C0245A346359


MISC:
GOULDS, MODEL 3196, 4X6-17 SZ, BEARING HOUSING O-RING, BUNA-N, C02495A2615302


MISC:
GOULDS, MODEL 3196 & 3197, INBOARD BALL END BEARING, 805031360


MISC:
P/N 73523 3,FOR GOULDS PUMP MODEL 3196 MTX 2X3-8,SERIAL #747E475,USED AT BLDG 50 CAUSTIC CLEANING PUMP &  FOR FRAME ADAPTER, PUMP MODEL 3196 X17, 4X6-17, 735233


MISC:
GOULDS, IMPELLER TYPE, 1X1-1/2 IN, C02495A28-6359


MISC:
SA W/TEL 6 VANE FOR GOULDS 3196 LTX3X4-13 PUMP,P/N 0B10591 1013,IMPELLER DIAMETER = 9.25 INCHES, 0B105911013


MISC:
ASSEMBLY FOR GOULDS 3196 LTX3X4-13 PUMP P/N RC03044A 2238, RC03044A-2238


MISC:
SHAFT FOR GOULDS 3196 LTX3X4-13 PUMP,P/N 9196X 2229


MISC:
BEARING N-10 FOR GOULDS 3196 LTX3X4-13 PUMP,P/N 8601-0010


MISC:
LABYRINTH OUTBOARD (VBXX-D),FOR GOULDS 3196 LTX3X4-13 PUMP,P/N A04951A132


MISC:
LABYRINTH INBOARD (VBXX-D) FOR GOULDS 3196 LTX3X4-13 PUMP,P/N A04951A131


MISC:
BEARING W-10 FOR GOULDS 3196 LTX3X4-13 PUMP,P/N 8910-0010


MISC:
VITON FOR GOULDS 3196 LTX3X4-13 PUMP,P/N C0245A2255304


MISC:
AS568-36 BUNA-N FOR GOULDS 3196 LTX3X4-13 PUMP,P/N CO245A36 5302


MISC:
VITON AS568-140 FOR GOULDS 3196 LTXX3X4-13 PUMP,P/N C0245A1405304


MISC:
VITON,2-5/8 IN (66.27 MM) I.D.,2-7/8 IN O.D,1/8 IN (3.53 MM) CROSS SECT,,STD INDUSTRIAL SIZE AS568-231,


MISC:
VITON,1-3/4 IN (44.04 MM) I.D.,2 IN O.D,1/8 IN (3.53 MM) CROSS SECT,,STD INDUSTRIAL SIZE AS568-224,


MISC:
VITON,4-3/8 IN (110.72 MM) I.D.,4-5/8 IN O.D,1/8 IN (3.53 MM) CROSS SECT,,STD INDUSTRIAL SIZE AS568-245,


MISC:
VITON,1-3/8 IN (34.65 MM) I.D.,1-1/2 IN O.D,1/16 IN (1.78 MM) CROSS SECT,,STD INDUSTRIAL SIZE AS568-028,


MISC:
45 MM (1.7717 IN),LOW CS,17 TANGS,0.063 IN MAX THICK MAX TH,0.053 IN MIN THICK MIN TH, 906309


MISC:
3 X 4 X 8 IN,3196MTX,550 GPM FLOW RATE,7-3/4 IN, 3X4X8GMTX1-X210


MISC:
GOULDS,MODEL 3196,FRAME TO ADAPTER TYPE,NON-ASBESTOS, 73078-5163


MISC:
8 IN PIPE,150 LB RATING,1/16 IN THICK,11 IN O.D.,NON-ASBESTOS,8-5/8 IN I.D.


MISC:
P/N 0100-161 1203,SA W/TFL,O-RING 5 VANE,FOR GOULDS PUMP MODEL 3196 MTX 2X3-8,SERIAL # 747E475,USED AT BUILDING 50 CAUSTIC CLEANING PUMP, 1001611203


MISC:
SPECIAL,P/N A01081A06,SB PACKMASTER 1,FOR GOULDS PUMP MODEL # 3196 MTX 2X3-8,SERIAL # 747E475,USED AT BUILDING 50 CAUSTIC CLEANING PUMP, A01081A06


MISC:
FRAME ASSEMBLY,P/N 262-92 1013,FOR GOULDS PUMP MODEL 3196 MTX 2X3-8,SERIAL # 747E475,USED AT BUILDING 50 CAUSTIC CLEANING PUMP, 262921013


MISC:
P/N 73707 6956,FOR GOULDS PUMP MODEL 3196 MTX 2X3-8,SERIAL # 747E475,USED AT BUILDING 50 CAUSTIC CLEANING PUMP, 737076956


MISC:
WINDOW,P/N A01154A05,FOR GOULDS PUMP MODEL 3196 MTX 2X3-8,SERIAL #747E475,USED AT BUILDING 50 CAUSTIC CLEANING PUMP, A01154A05


MISC:
P/N 27177 607 2229,FOR GOULDS PUMP MODEL 3196 MTX 2X3-8,SERIAL #747E475,USED AT BUILDING 50 CAUSTIC CLEANING PUMP,


MISC:
P/N 49568 118 2213,SQUARE END,FOR GOULDS PUMP MODEL 3196 MTX 2X3-8,SERIAL #747E475,USED AT BUILDING 50 CAUSTIC CLEANING PUMP


MISC:
P/N 73523 3,FOR GOULDS PUMP MODEL 3196 MTX 2X3-8,SERIAL #747E475,USED AT BUILDING 50 CAUSTIC CLEANING PUMP AND FOR FRAME ADAPTER, PUMP MODEL 3196 X17, SIZE: 4X6-17, 735233


MISC:
2-5/8 IN (66.27 MM) I.D.,2-7/8 IN O.D,1/8 IN (3.53 MM) CROSS SECT,STD INDUSTRIAL SIZE AS568-231,


MISC:
1-3/4 IN (44.04 MM) I.D.,2 IN O.D,1/8 IN (3.53 MM) CROSS SECT,,STD INDUSTRIAL SIZE AS568-224,


MISC:
4-3/8 IN (110.72 MM) I.D.,4-5/8 IN O.D,1/8 IN (3.53 MM) CROSS SECT,,STD INDUSTRIAL SIZE AS568-245,


MISC:
1-3/8 IN (34.65 MM) I.D.,1-1/2 IN O.D,1/16 IN (1.78 MM) CROSS SECT,,STD INDUSTRIAL SIZE AS568-028,


MISC:
45 MM (1.7717 IN),LOW CS,17 TANGS,0.063 IN MAX THICK MAX TH,0.053 IN MIN THICK MIN TH, 90630


MISC:
GOULDS,MODEL 3196 3 X 4X8G MTX,OIL,ALLOY 20, R196MTPRKO


MISC:
MODEL 3316/M 13X4-116,LANTERN,TEFLON MATL, R76293 ITEM 105


MISC:
REXNORD,ES5-R COUPLING SZ,URETHANE,OMEGA SPACER ELEMENT,2 PIECE,W/ HIGH SPEED RINGS, 7300090


MISC:
2-5/8 IN (66.27 MM) I.D.,2-7/8 IN O.D,1/8 IN (3.53 MM) CROSS SECT,,STD INDUSTRIAL SIZE AS568-231,


MISC:
INGERSOLL-RAND,5 CRVL,PACKING,SPLIT, 2 HALVES, 175G16CSX1543F


MISC:
INGERSOLL-RAND,SQUARE HEAD, PACKING GLAND,CS MAT,3/8-16 UNC THRD,W/NUT, GLAND, Y240737175


MISC:
SINGLE ROW,RADIAL THRUST,MED(300),SNAP RING,45 MM (1.7717 IN) BORE,100 MM (3.9370 IN) O.D.,MAX,25 MM (0.9843 IN) TH, 309WG


MISC:
SET, RING, PACKING MOLD,GRAPHITE, BY49122BTFGP2Z113


MISC:
SINGLE ROW,RADIAL THRUST,MEDIUM 300 SERIES,SNAP RING,45 MM BORE,100 MM (3.9370 IN) O.D.,CONRAD TYP,25 MM (0.9843 IN) TH,WITH RETAINING DISC, 6309-NR


MISC:
DURISON,IMPELLAR GASKET PART TYP, SA3210AA00TFR


MISC:
GOULD'S MODEL SP 98S 2X3-6,USED AT BLDG.30 ACID SUMP PUMP,MFG:GOULDS, SP98S2X36


MISC:
OUTBOARD,P/N AY55592A-BBV FOR FLOWSERVE PG 6 X 4-13A / 12.31 RV ACID PUMP,S/N 802-5579 FOR BUILDING 42, AY55592ABBV-OUT


MISC:
P/N DY33074A-D20 FOR FLOWSERVE PG 6 X 4-13A / 12.31 RV ACID PUMP,S/N 802-5579 FOR BUILDING 42, DY33074AD20


MISC:
P/N MY36846AA130-D20 FOR FLOWSERVE PG 6 X 4-13A / 12.31 RV ACID PUMP,S/N 802-5579 FOR BUILDING 42, MY36846AA130D20


MISC:
P/N DY55387A-D20 FOR FLOWSERVE PG 6 X 4-13A / 12.31 RV ACID PUMP,S/N 802-5579 FOR BUILDING 42, DY55387AD20


MISC:
FOR FLOWSERVE PG 6 X 4-13A / 12.31 RV ACID PUMP,


MISC:
P/N Y21963A-SR FOR FLOWSERVE PG 6 X 4-13A / 12.31 RV ACID PUMP,S/N 802-5579 FOR BUILDING 42, Y21963ASR-OUT


MISC:
P/N AY55592A-BBV FOR FLOWSERVE PG 6 X 4-13A / 12.31 RV ACID PUMP,S/N 802-5579 FOR BUILDING 42, AY5552ABBV-IN


MISC:
P/N DY55225C1 FOR FLOWSERVE PG 6 X 4-13A / 12.31 RV ACID PUMP,S/N 802-5579 FOR BUILDING 42, DY55225C1


MISC:
P/N Y21963A-SR FOR FLOWSERVE PG 6 X 4-13A / 12.31 RV ACID PUMP,S/N 802-5579 FOR BUILDING 42, Y21963ASR-IN


MISC:
FOR FLOWSERVE PG 6 X 4-13A / 12.31 RV ACID PUMP FOR BUILDING 42,


MISC:
P/N BY58228A-C276 FOR FLOWSERVE PG 6 X 4-13A / 12.31 RV ACID PUMP,S/N 802-5579 FOR BUILDING 42, BY58228AC276


MISC:
2 X 3-11 SZ,3316M MODEL,HIGH PRESSURE/WATER,ALL IRON MATL,10.75 IN DIA IMPELLER


MISC:
30 MM (1.1811 IN),LOW CS,32 TPI,0.416 IN MAX TH,RH THRD,0.396 IN MIN TH, N-06


MISC:
GOULDS,SERIES 3405 & 3316,WATER DEFLECTOR, 74812-01


MISC:
30 MM BORE,LOW CS MATL,32 TPI,0.416 IN MAX TH,RH THRD,0.396 IN MIN TH, 8601-0006


MISC:
GOULDS,SERIES 3316,COUPLING BALL BEARING,OUTBOARD STYLE,SINGLE TYPE, 8050-30760


MISC:
GOULDS,SERIES 3316,IMPELLER HUB O-RING,TFE, C02495A33-6359


MISC:
GOULDS PUMPS,MODEL 3355 MULTISTAGE,CS MATL, 49568 107 2213


MISC:
GOULDS,P/N 258C454SL,FOR MODEL 3316/M 3X4-11 PUMP,


DESCRIPTION:
IMPELLER, WASHER OVERFLOW BOOSTER, #D02643A01-1000


DESCRIPTION:
IMPELLER, 10-1/2" DIA. SCND STG. 2GT3FX5-CI


DESCRIPTION:
IMPELLER, 9-1/2" DIA. 1ST STG 2GT3GX5-202


DESCRIPTION:
CASING, UPPER & LOWER HRZ SPLT CCN 60520277


MISC:
TO REPLACE THE INGERSOLL RAND PUMPS IN THE S CIRCUIT

NOTES:
SIPF REPLACEMENT TEST PUMP 150ZJA50 WITH 78% EFFICIENCY IS $12,000.00 NET EACH


MISC:
BEARINGS, GASKETS, SEALS, PACKING, MISC. SHAFT ASSY. PARTS.


DESCRIPTION:
RING, CASING - P/N 413138 (CANADA PUMPS STANDARD P/N 9)

OEM PART#:
P/N 413138 (CANADA PUMPS STANDARD P/N 9)


DESCRIPTION:
SLEEVE, SHAFT CHROME OXIDE PLASMA COATED - P/N 310908 (CANADA PUMPS STANDARD P/N 8)

OEM PART#:
P/N 310908 (CANADA PUMPS STANDARD P/N 8)


MISC:
USE 9038-J1 FOR SLEEVE. BRGS ARE SKF #3211 & 7310BG

DESCRIPTION:
SHAFT, FLXSL 3X4DS (CANADA PUMPS STANDARD P/N 7)


DESCRIPTION:
IMPELLER, 20-1/2" DIA 430BHN 8V W/RINGS - P/N 312727(CANADA PUMPS STANDARD P/N 3)


DESCRIPTION:
SLEEVE, SHAFT SHORT - P/N214570 (CANADA PUMPS STANDARD P/N 8)


DESCRIPTION:
SHAFT, FLXSL 12X14-27 S (CANADA PUMPS STANDARD P/N 7 & 7C)


DESCRIPTION:
SLEEVE, STD SHAFT - P/N 319340 (CANADA PUMPS STANDARD P/N 8)

OEM PART#:
P/N 319340 (CANADA PUMPS STANDARD P/N 8)


MISC:
SHAFT DWG #9027-J1 WEAR RING DWG #9012-J1 (SEE FOOT NOTES ON WINDALCO DWG# 261604)

DESCRIPTION:
IMPELLER, 23-1/2" DIA., 400BHN 5V C/W W/RING - P/N 314995 (CANADA PUMPS STANDARD P/N 3 & 4)

NOTES:
26" DIA. MAX. IMPELLER TO BE STATIC BALANCED

OEM PART#:
P/N 314995 (CANADA PUMPS STANDARD P/N 3 & 4)


MISC:
SHAFT DWG #9027-J1 WEAR RING DWG #9012-J1; PATTERN IN INDIA & CHINA

DESCRIPTION:
IMPELLER, 18" DIA., 400BHN 5V W/RING - P/N 314995 (CANADA PUMPS STANDARD P/N 3 & 4)


DESCRIPTION:
SHAFT, FLXSL + SLEEVE - JAD-F-3296 (CANADA PUMPS STANDARD P/N 8)


DESCRIPTION:
SLEEVE, SHAFT PLSMA CTD  - 63RC P/N 311344


DESCRIPTION:
CASING & COVER - P/N 411552-3 (CANADA PUMPS STANDARD 2 & 2A)

OEM PART#:
P/N 411552-3 (CANADA PUMPS STANDARD 2 & 2A)


DESCRIPTION:
COVER, STUFFING BOX - P/N D00781E000-1228


MISC:
B2 BEARING FRAME, Drawing was modified 04/18 by Hopeton


DESCRIPTION:
CASING, W/O BACKWALL -P/N  E00125E000-1228


MISC:
SEE 9026-J1/R2 FOR THE SHAFT STK #600859

NOTES:
SAME DRAWING AS STOCK NUMBERS 600875, 600835 EXCEPT DIAMETER


MISC:
SEAL #180WB-14E P/N 131876 ROTATION CLOCKWISE. IMPELLER TRIM TO 9" DIAMETER

NOTES:
INTMPE MODEL 125S80-370 C/WITH M.S., COUPLING & BASE PLATE S-6 MATERIAL US$10,381.00 CHINA COST


DESCRIPTION:
IMPELLER, 15" DIA 400BHN 3V C/W W/RING - P/N 319181A (CANADA PUMPS STANDARD P/N 3, 3A & 4)

NOTES:
IMPELLER WEAR RING DWG #9007-J1 STOCK #610447 RING INCLUDED IN IMPELLER PRICE

OEM PART#:
P/N 319181A (CANADA PUMPS STANDARD P/N 3, 3A & 4)


DESCRIPTION:
IMPELLER, 18-1/2" DIA 3V 400BHN W/RING - P/N 314992 (CANADA PUMPS STANDARD 3, 3A & 4)

OEM PART#:
P/N 314992 (CANADA PUMPS STANDARD 3, 3A & 4)


DESCRIPTION:
SEAL CAGE, SPLIT - P/N 314084 (CANADA PUMPS STANDARD P/N 14A)

OEM PART#:
P/N 314084 (CANADA PUMPS STANDARD P/N 14A)


DESCRIPTION:
COVER, BEARING OUTBOARD - P/N 311339 (CANADA PUMPS STANDARD P/N 25)

OEM PART#:
P/N 311339 (CANADA PUMPS STANDARD P/N 25)


DESCRIPTION:
IMPELLER, 9" DIA 400BHN 4V CCW - P/N 311334


MISC:
COMPLETE WITH PLUG PART  NUMBER CHANGES TO 16-342-024

NOTES:
REQUIRE SAMPLE TO PRODUCE NEW AND OR REBUILD OLD


MISC:
MAKE NUT DRAWING FROM SHAFT & IMPELLER DWG

DESCRIPTION:
NUT, IMPELLER - P/N 212010 *CANADA PUMPS STANDARD P/N 15)

OEM PART#:
P/N 212010 *CANADA PUMPS STANDARD P/N 15)


DESCRIPTION:
COVER, HAND HOLE SUCTION - P/N G-2919 (CANADA PUMPS STANDARD P/N 42A)

OEM PART#:
P/N G-2919 (CANADA PUMPS STANDARD P/N 42A)


MISC:
INCLUDES  SHAFT, BRG. HSNG., BRG. FRAME, DR. HALF CPL, CASING COVER


DESCRIPTION:
IMPELLER, 15-3/4" DIA 3V 400BHN - P/N 411744 (CANADA PUMPS STANDARD P/N 3)

OEM PART#:
P/N 411744 (CANADA PUMPS STANDARD P/N 3)


DESCRIPTION:
IMPELLER, 13-1/4" DIA 400BHN 3V - P/N 319181A (CANADA PMUPS STANDARD P/N 3 & 3A)

OEM PART#:
P/N 319181A (CANADA PMUPS STANDARD P/N 3 & 3A)


DESCRIPTION:
IMPELLER, 14-3/16" DIA 400BHN 3V - P/N 319181A (CANADA PMUPS STANDARD P/N 3 & 3A)


DESCRIPTION:
IMPELLER, 14-5/8" DIA 400BHN 3V - P/N 319181A (CANADA PMUPS STANDARD P/N 3 & 3A)


DESCRIPTION:
GASKET, VALVE COVER 90 DURO  - P/N 16-506-007


DESCRIPTION:
IMPELLER, 15-3/4" DIA 400BHN 3V - P/N 319181A (CANADA PMUPS STANDARD P/N 3 & 3A)


DESCRIPTION:
IMPELLER, 16" DIA 400BHN 3V - P/N 319181A (CANADA PMUPS STANDARD P/N 3 & 3A)


DESCRIPTION:
IMPELLER, 16-1/2" DIA 400BHN 3V - P/N 319181A (CANADA PMUPS STANDARD P/N 3 & 3A)


DESCRIPTION:
RING, IMPELLER WEAR - P/N 314985 (CANADA PMUPS STANDARD P/N 4)

OEM PART#:
P/N 314985 (CANADA PMUPS STANDARD P/N 4)


DESCRIPTION:
RING, IMPELLER WEAR - P/N 210962 (CANADA PMUPS STANDARD P/N 4)

OEM PART#:
P/N 210962 (CANADA PMUPS STANDARD P/N 4)


DESCRIPTION:
IMPELLER, 14-1/8" DIA 400BHN 3V - (CANADA PMUPS STANDARD P/N 3 & 3A)


DESCRIPTION:
IMPELLER, 13-1/2" DIA 400BHN 3V - 319181A (CANADA PMUPS STANDARD P/N 3 & 3A)


DESCRIPTION:
SHAFT & SLEEVE ASSY - P/N 312500 (CANADA PMUPS STANDARD P/N 8)

OEM PART#:
P/N 312500 (CANADA PMUPS STANDARD P/N 8)


DESCRIPTION:
SLEEVE, SHAFT - P/N 312068 (CANADA PMUPS STANDARD P/N 8)

OEM PART#:
P/N 312068 (CANADA PMUPS STANDARD P/N 8)


DESCRIPTION:
BOX, STUFFING SPLIT  - P/N 213777 (CANADA PMUPS STANDARD P/N 47)

OEM PART#:
P/N 213777 (CANADA PMUPS STANDARD P/N 47)


DESCRIPTION:
HOUSING, THRUST BEARING - P/N G-4009(CANADA PUMPS STANDARD P/N 38B)

OEM PART#:
P/N G-4009(CANADA PUMPS STANDARD P/N 38B)


DESCRIPTION:
BEARING CAP THRUST  - P/N G-2552 (CANADA PUMPS STANDARD P/N 23)

OEM PART#:
P/N G-2552 (CANADA PUMPS STANDARD P/N 23)


DESCRIPTION:
SEAL, THRUST BEARING - P/N G-4076 (CANADA PUMPS STANDARD P/N 27)

OEM PART#:
P/N G-4076 (CANADA PUMPS STANDARD P/N 27)


DESCRIPTION:
BEARING COLLAR THRUST  - P/N G-6612 (CANADA PUMPS STANDARD P/N 35B)

OEM PART#:
P/N G-6612 (CANADA PUMPS STANDARD P/N 35B)


DESCRIPTION:
CASING - P/N 410390-1 (CANADA PUMPS STANDARD P/N 2)

OEM PART#:
P/N 410390-1 (CANADA PUMPS STANDARD P/N 2)


DESCRIPTION:
CASING, W/STUFFING BOX DWG#411335-D (CANADA PUMPS STANDARD P/N 2, 2A & 6 )

NOTES:
NOTE: NEW PRICING RELATES TO 28% CHROME IRON, NOT NIHARD AS OLD PRICE


DESCRIPTION:
GLAND, SPLIT - P/N 310501  (CANADA PUMPS STANDARD P/N 12A)

OEM PART#:
P/N 310501  (CANADA PUMPS STANDARD P/N 12A)


DESCRIPTION:
UPPER IDLE ROLLER  (M 154 482) DWG #4024-J1

NOTES:
***NOTE: CHECK FOR LATEST REVISION BEFORE MANUFACTURING.***


DESCRIPTION:
BEARING INSERT, PILLOW BLOCK P/N  034-94-23-1 DWG 4016-J1


DESCRIPTION:
COVER, BEARING INBOARD (CANADA PUMPS STANDARD P/N 24)


MISC:
K2 FASTNERS, EDMONTON. 3-3/16"LONG X 1" DIA. EYE I.D. X 1/2" N.C. 316SS

DESCRIPTION:
BOLT & NUT, GLAND SWING 1/2" - P/N 310340  (CANADA PMUPS STANDARD P/N 13A & 13B)

OEM PART#:
P/N 310340  (CANADA PMUPS STANDARD P/N 13A & 13B)


DESCRIPTION:
COVER, HAND HOLE ASTM A532 HARD CHROME  (CANADA PMUPS STANDARD P/N 42)


MISC:
NOTE: SHAFT IS USED WITH PACKING AND NEW SEAL DESIGNS SUPPLIED BY CRS.

DESCRIPTION:
SHAFT, & SLEEVE ASSY. 4X6DSH  (CANADA PMUPS STANDARD P/N 8)


DESCRIPTION:
SLEEVE,  BEARING SPACER- P/N 310103  (CANADA PMUPS STANDARD P/N 41)

OEM PART#:
P/N 310103  (CANADA PMUPS STANDARD P/N 41)


DESCRIPTION:
COVER, BEARING INBOARD  -P/N G-6338  (CANADA PMUPS STANDARD P/N 24)

OEM PART#:
P/N G-6338  (CANADA PMUPS STANDARD P/N 24)


DESCRIPTION:
COVER, BEARING OUTBOARD - P/N G-6337R  (CANADA PMUPS STANDARD P/N 25)

OEM PART#:
P/N G-6337R  (CANADA PMUPS STANDARD P/N 25)


DESCRIPTION:
FLINGER, INBOARD - P/N G-1223  (CANADA PMUPS STANDARD P/N 18A)

OEM PART#:
P/N G-1223  (CANADA PMUPS STANDARD P/N 18A)


DESCRIPTION:
FLINGER, OUTBOARD - P/N G-1249  (CANADA PMUPS STANDARD P/N 18B)

OEM PART#:
P/N G-1249  (CANADA PMUPS STANDARD P/N 18B)


DESCRIPTION:
GLAND, SPLIT - P/N 312308-A  (CANADA PMUPS STANDARD P/N 12A)

OEM PART#:
P/N 312308-A  (CANADA PMUPS STANDARD P/N 12A)


DESCRIPTION:
NUT, IMPELLER - P/N G-1219-2  (CANADA PMUPS STANDARD P/N 15)

OEM PART#:
P/N G-1219-2  (CANADA PMUPS STANDARD P/N 15)


DESCRIPTION:
NUT, IMPELLER NUT L/SCREW - P/N G-5520  (CANADA PMUPS STANDARD P/N 15 & 15A)

OEM PART#:
P/N G-5520  (CANADA PMUPS STANDARD P/N 15 & 15A)


DESCRIPTION:
KEY, IMPELLER  (CANADA PMUPS STANDARD P/N 17 & 17B)


MISC:
MODIFIED FOR CEFILAC SEAL    SLURRY PUMP. Sold to crsjl $580. 02/15

DESCRIPTION:
LINER, DRIVE SIDE 6" CFLC BORE - P/N 215372 (CANADA PUMPS STANDARD P/N 89)

NOTES:
ADVISE BORE WHEN ORDERING, 6" OR 5-3/8" (USE 9011-J1 PATTERN, BUT CHANGE BORE)

OEM PART#:
P/N 215372 (CANADA PUMPS STANDARD P/N 89)


MISC:
ASTM A743 Ni is around 4%, Cr is 13.5%, Mo is 1%

DESCRIPTION:
CASING, MODIFY FOR CARTRIDGE SEAL 400BHN - P/N 412214-5 (CANADA PUMPS STANDARD P/N 2 AND 2A)

OEM PART#:
P/N 412214-5 (CANADA PUMPS STANDARD P/N 2 AND 2A)


MISC:
HEAT TREAT TO 290-320Bhn     MODIFIED FOR CEFILAC SEAL

DESCRIPTION:
CASING, PACKED BOX  - P/N 412214-5 (CANADA PUMPS STANDARD P/N 2 & 2A)

OEM PART#:
P/N 412214-5 (CANADA PUMPS STANDARD P/N 2 & 2A)


MISC:
SEE DWG #1437-J1 FOR WEAR LINER, SUC. SIDE & 1132-J1-2 FOR CASING COVER/ AS STATED ON CLASS A SHEETS P/N 2

DESCRIPTION:
COVER, CASING DRIVE SIDE - P/N 053-D-0002 (CANADA PUMPS STANDARD P/N 2 & 2A)

OEM PART#:
P/N 053-D-0002 (CANADA PUMPS STANDARD P/N 2 & 2A)


DESCRIPTION:
BEARING FRAME (CANADA PUMPS STANDARD P/N 22)


DESCRIPTION:
COVER, SUCTION SIDE (CANADA PUMP STANDARD P/N 5)

NOTES:
***NOTE CHECK FOR LATEST REVISION BEFORE MANUFACTURING.*** (MOLD 861.00)


MISC:
SEE DWG #1437-J1 FOR WEAR LINER, SUC. SIDE & 1132-J1-2 FOR SUC. END COVER & 1267-J1-3 FOR MODIFIED VERSION OF 1132-J1, 1131-J1 CASING COVER

DESCRIPTION:
CASING EV18064 - 500Bhn (CANADA PUMP STANDARD P/N 2)

NOTES:
THERE IS 3 SHEETS FOR THIS 1 DRAWING #1221-J1. SHEET 1 = DIMENSIONS, SHEET 2 = HYDRAULIC PROFILE, SHEET 3 = PLUG DETAILS.


DESCRIPTION:
IMPELLER, 12-1/2"DIA 3V 400BHN (CANADA PUMPS STANDARD P/N 3)


DESCRIPTION:
IMPELLER, 13" DIA 3V 400BHN (CANADA PUMPS STANDARD P/N 3)


DESCRIPTION:
IMPELLER, 15" DIA 3V 400BHN (CANADA PUMPS STANDARD P/N 3)


DESCRIPTION:
IMPELLER, 16" DIA 400BHN 8V W/RINGS - P/N 312727 (CANADA PUMPS STANDARD P/N 4)

OEM PART#:
P/N 312727 (CANADA PUMPS STANDARD P/N 4)


NOTES:
****NOTE: CHECK FOR LATEST REVISION BEFORE MANUFACTURING.****


DESCRIPTION:
IMPELLER, 14" DIA 3V 400BHN (CANADA PUMPS STANDARD P/N 3)


DESCRIPTION:
LINER, DRIVE SIDE 500Bhn 3-1/2" STD BORE  (CANADA PUMPS STANDARD P/N 89)

NOTES:
SAME AS 4122-J1/R3 EXCEPT BORE OF PLATE IS 3-1/2" DIAMETER


DESCRIPTION:
CASING, W/PKG BOX 280BHN  - P/N 510342/7 (CANADA PUMPS STANDARD P/N 2 & 2A)

NOTES:
NOTE: SIZE 10X12S CASING IS $15680 SELLING PRICE AND OEM $26400.00

OEM PART#:
P/N 510342/7 (CANADA PUMPS STANDARD P/N 2 & 2A)


DESCRIPTION:
CASING, W/STUFFING BOX 220BHN - P/N 510180 (CANADA PUMPS STANDARD P/N 2, 2A & 6)

OEM PART#:
P/N 510180 (CANADA PUMPS STANDARD P/N 2, 2A & 6)


MISC:
CW PUMP (CURVE 3 DS-G-141 PUMP SPEED 960RPM)

DESCRIPTION:
IMPELLER, 11-3/4" DIA W/RING  - P/N G-6401R (CANADA PUMPS STANDARD P/N 3 & 3A)

OEM PART#:
P/N G-6401R (CANADA PUMPS STANDARD P/N 3 & 3A)


DESCRIPTION:
SHAFT, 3X4DS STD ALL SEALS 1.750 DIA. (CANADA PUMPS STANDARD P/N 7 & 14A)


MISC:
CW ACID       (CURVE 3 DS-G-141 PUMP SPEED 960RPM)

DESCRIPTION:
IMPELLER, 11-1/2" DIA - P/N G-1973R (CANADA PUMPS STANDARD P/N 3 & 3A)

OEM PART#:
P/N G-1973R (CANADA PUMPS STANDARD P/N 3 & 3A)


DESCRIPTION:
SLEEVE, SHAFT INNER/PLSMA CTD,  - P/N 215414


MISC:
LATEST DESIGN SK-EW-101-JK 1983, SAME AS 9052-J1 OLD DESIGN, ONLY 1 METAL USED

DESCRIPTION:
RING, CASING, BEVEL - P/N 319109  (CANADA PUMPS STANDARD P/N 9)

NOTES:
OLD DESIGN SHOWN ON CANADA PUMP DWGS 319109-A & 9037-J1

OEM PART#:
P/N 319109  (CANADA PUMPS STANDARD P/N 9)


MISC:
USES BEARINGS SKF #2316 (170mm) RADIAL & SKF #7415BG (190mm) THRUST. NOTE: SAME STAND USED ON 10X12DS

DESCRIPTION:
PEDESTAL STAND & CAP - P/N G-1382R (CANADA PUMPS STANDARD P/N 22 & 23)

OEM PART#:
P/N G-1382R (CANADA PUMPS STANDARD P/N 22 & 23)


DESCRIPTION:
IMPELLER, 14" DIA 400BHN 3V  C/W W/ BEVEL RING - P/N 319181A (CANADA PUMPS STANDARD P/N 3, 3A & 4)

NOTES:
IMPELLER WEAR RING DWG #9007-J1 STOCK #610447. RING INCLUDED IN IMPELLER PRICE


DESCRIPTION:
IMPELLER, 13" DIA 400BHN 3V C/W W/RING - P/N 319181A (CANADA PUMPS STANDARD P/N 3, 3A, 3B & 4)

OEM PART#:
P/N 319181A (CANADA PUMPS STANDARD P/N 3, 3A, 3B & 4)


DESCRIPTION:
RING, CASING - P/N 213208 (CANADA PUMPS STANDARD P/N 9)

OEM PART#:
P/N 213208 (CANADA PUMPS STANDARD P/N 9)


DESCRIPTION:
HOUSNG, BEARING C/W GREASE ZERK  - P/N 311303

NOTES:
(INT.37010-12898 QTY.4) 9097-J1/R1PA IS FOR CAP ONLY, NOT BEARING OUTER HOUSING.


DESCRIPTION:
RING, IMPELLER WEAR - P/N 213209 440 Bhn (CANADA PUMPS STANDARD P/N 4)

OEM PART#:
P/N 213209 440 Bhn (CANADA PUMPS STANDARD P/N 4)


DESCRIPTION:
SHAFT, 4X6NH STD ALL SEALS 3.000 DIA.(CANADA PUMPS STANDARD P/N 7, 14, & 14B)


DESCRIPTION:
HOUSING, BEARING  (CANADA PUMPS STANDARD P/N 38D)

NOTES:
(QUOTE: 511037)  DRAWING CORRECTION NEEDED FOR MACHINING!!!!!


DESCRIPTION:
NUT, BRNG HSNG ADJST- P/N 212012 (CANADA PUMPS STANDARD P/N 29A)

OEM PART#:
P/N 212012 (CANADA PUMPS STANDARD P/N 29A)


DESCRIPTION:
CASING & COVER, CW - P/N 410338 (CANADA PUMPS STANDARD P/N 2 & 2A)

OEM PART#:
P/N 410338 (CANADA PUMPS STANDARD P/N 2 & 2A)


DESCRIPTION:
WEAR RING, IMPELLER , GRAY - P/N 71171-1001


MISC:
DAVID BROWN COUPLING SIZE 03-05, ASSY. P/N 41111-2-025 -MAT: STEEL/RUBBER


NOTES:
MAKE DRAWING. HAVE DRAWING FOR 5.750" VALVE #1112-J1/R1


DESCRIPTION:
VALVE, C/W POLY INSERT  - P/N 83-019-505


MISC:
3/8" RATED 0 to 1000 PSIG FEMALE/FEMALE PIPE (ROUND STOCK CONFIGURATATION) P/N 2300 SERIES,  P/N 78-819-140


MISC:
UTEX #1056-52-0129-01 MATERIAL #1056 IS NITRIL FILLED WITH TEFLON AND COTTON FIBRE. 50 SHORE "D"


MISC:
SEE 667414 FOR SAME RING IN TEFLON MATERIAL

NOTES:
**DELIVERY IS 35 DAYS  MOLD PRICE 85.00  (INT.37016-12992 QTY.100)


MISC:
Material is Manganese Bronze Alloy No. C86300 SAE 430B and ASTM 8C. Bhn 225

NOTES:
***DRAWING $75.00  MOLD: $223.00 BRONZE (CASTING PAT. 246.00)


DESCRIPTION:
BEARING, CROSSHEAD SHOE  - P/N 16-483-629


MISC:
PLUNGER MADE FROM SOLID STEEL AND HOLLOWED OUT.


MISC:
HOLD!!! DO NOT MANUFACTURE FROM DRAWING UNTIL REVIEW OF NECK AND STRENGTHENING OF ENDS. **** DO NOT USE 1/19 unless specified by customer

NOTES:
R12 IS A ONE PIECE HOLLOWED OUT PLUNGER WITH PLUG ON PRESSURE END.


DESCRIPTION:
PLATE, 18X9X1-1/2" THICK DRILLED MANGANESE


MISC:
UTEX MATERIAL #CPD-50019 HARDNESS 60 DURO

NOTES:
TOLERANCES IN MFG. IS; ALL DIMENSIONS  + - .030. PARTICAL SIZES UP TO 8MM


MISC:
4140 STEEL HT TO 400BHN VALVE RING SEATING AREA

DESCRIPTION:
SEAT, VALVE P/N 831.150.917 (ROUND, WITH O-RINGS)


NOTES:
NOTE: CUTOMER IS USING SQUARE SHAFT NOW, DRAWING #1157-J1


DESCRIPTION:
RING, CASING - P/N G-1882 (CANADA PUMPS STANDARD P/N 9)

OEM PART#:
P/N G-1882 (CANADA PUMPS STANDARD P/N 9)


DESCRIPTION:
BEARING HALF, CON ROD BIG END  - P/N 1302-2937-80


MISC:
NOTE: WEIGHT OF BALLS IS 2028LBS/45 GALLON DRUM

NOTES:
This is a kind of low Cr cast balls with hardness more than HRC47. In wet grinding process, for dia100mm balls, the wear performance of low Cr cast balls will be better than that of forged balls.


MISC:
USES BEARINGS SKF #22220 C2 (180mm) RADIAL & SKF #7415BG (190mm) THRUST.

DESCRIPTION:
STAND & CAP, BEARING - P/N 410132 (CANADA PUMPS STANDARD P/N 22 & 23)

OEM PART#:
P/N 410132 (CANADA PUMPS STANDARD P/N 22 & 23)


DESCRIPTION:
CASING & COVER - P/N 410398 (CANADA PUMPS STANDARD P/N 2 & 2A)

OEM PART#:
P/N 410398 (CANADA PUMPS STANDARD P/N 2 & 2A)


NOTES:
SEAT- P/N 1002 2236,GUARD- P/N 1002 2239;VALVE & BUFFER DISCS-P/N __________(SEE DWG)


DESCRIPTION:
DELVERY VALVE COMPLETE, P/N 1002-2237-80


DESCRIPTION:
SUCTION VALVE COMPLETE, - P/N 1002-2236-80


DESCRIPTION:
VALVE SEAT, DELIVERY L.P. - P/N 1002-2237-80


DESCRIPTION:
PIN, W/WASHERS & COTTER PIN,  #1  - P/N 64714-3


DESCRIPTION:
BEARING PILLOW BLOCK CONVEYOR, SMALL DWG#2111-J1


NOTES:
****NOTE: SEE DWG.# 4024-J1 IT IS THE SAME. ****


MISC:
NUT-SAE 1020, SPINDLE-AISI 4140, ROD ASTM B21


MISC:
Drawing shows 10" long x 6-1/2" wide x 5-1/8" deep bucket with bottom radius of 2-1/2"


DESCRIPTION:
IMPELLER, 16-3/4" DIA 3V 400BHN - P/N 411744 (CANADA PUMPS STANDARD P/N 3)


DESCRIPTION:
COVER, BEARING OUTBOARD - P/N 310304 (CANADA PUMPS STANDARD P/N 25)

OEM PART#:
P/N 310304 (CANADA PUMPS STANDARD P/N 25)


DESCRIPTION:
HOUSING, BRACKET & CAP, BEARING - P/N G4316 (CANADA PUMPS STANDARD P/N 23 & 33)

NOTES:
CRS112274-INT.510959) BUFFALO PUMP SOLD FOR $1198.00. R4 Adds spiggot to fit into casing locating groove 1135-J1R4

OEM PART#:
P/N G4316 (CANADA PUMPS STANDARD P/N 23 & 33)


DESCRIPTION:
NUT, IMPELLER LH THREAD -  P/N 311034 (CANADA PUMPS STANDARD P/N 15)

OEM PART#:
P/N 311034 (CANADA PUMPS STANDARD P/N 15)


DESCRIPTION:
NUT, IMPELLER RH THREAD - P/N 311034 (CANADA PUMPS STANDARD P/N 15)


DESCRIPTION:
RING, IMPELLER WEAR 410BHN - P/N 210964 (CANADA PUMPS STANDARD P/N 3 & 3A)

NOTES:
SAME AS STOCK #610445, 610446. RING INCLUDED IN IMPELLER PRICE

OEM PART#:
P/N 210964 (CANADA PUMPS STANDARD P/N 3 & 3A)


DESCRIPTION:
COVER, HAND HOLE (CANADA PUMPS STANDARD P/N 42)


MISC:
SAME AS 610132 RING ON IMPELLER DWG #4014-J1/R4

DESCRIPTION:
RING, IMPELLER WEAR - P/N 213718 (CANADA PUMPS STANDARD P/N 3)

OEM PART#:
P/N 213718 (CANADA PUMPS STANDARD P/N 3)


MISC:
SAME AS 610945 RING ON IMPELLER DWG #4014-J1/R4

DESCRIPTION:
RING, IMPELLER WEAR 610132 - P/N 213718 (CANADA PUMPS STANDARD P/N 3)


MISC:
OLD PART NUMBER 608160-030, BEARINGS USED ON THIS SHAFT ARE 6320-ZZ &


DESCRIPTION:
BOLT, PAN HARDENED WASHERS & SQ. NUT - P/N 22334-0-02


MISC:
BEARING SIZES SKF 3211 (100mm) RADIAL, SKF 7310BG (110mm)THRUST

DESCRIPTION:
STAND, PEDESTAL & CAP  - P/N G-1055R (CANADA PUMPS STANDARD P/N 22 & 23)

OEM PART#:
P/N G-1055R (CANADA PUMPS STANDARD P/N 22 & 23)


DESCRIPTION:
COVER, BEARING OUTBOARD (CANADA PUMPS STANDARD P/N 25)


MISC:
SEE DWG #1132-J1/R2 FOR SUCTION CASING COVER


DESCRIPTION:
SLEEVE, SHAFT (CANADA PUMPS STANDARD P/N 8)


MISC:
SHAFT DWG #9027-J1 WEAR RING DWG #9012-J1

DESCRIPTION:
IMPELLER, 25" DIA., 400BHN 5V W/RING - P/N 314995 (CANADA PUMPS STANDARD P/N 3)

OEM PART#:
P/N 314995 (CANADA PUMPS STANDARD P/N 3)


DESCRIPTION:
IMPELLER, 21-5/8" DIA 5V 400BHN W/RING - P/N 314995  (CANADA PUMPS STANDARD P/N 3)

OEM PART#:
P/N 314995  (CANADA PUMPS STANDARD P/N 3)


DESCRIPTION:
IMPELLER, 22-1/2" DIA., 400BHN 5V W/RING - P/N 314995  (CANADA PUMPS STANDARD P/N 3)


DESCRIPTION:
IMPELLER, 23 " DIA., 400BHN 5V W/RING - P/N 314995  (CANADA PUMPS STANDARD P/N 3)

NOTES:
26" DIA. MAX. IMPELLER TO BE STATIC BALANCED. PATTERN IN CHINA & INDIA


DESCRIPTION:
IMPELLER, 22" DIA 5V 400BHN  W/RING - P/N 213717B  (CANADA PUMPS STANDARD P/N 3)

OEM PART#:
P/N 213717B  (CANADA PUMPS STANDARD P/N 3)


MISC:
SHAFT DWG #9027-J1 WEAR RING DWG #9012-J1/213718

DESCRIPTION:
IMPELLER, 20" DIA,M 400BHN 5V W/RING - P/N 314995  (CANADA PUMPS STANDARD P/N 3)


MISC:
SEE 9026-J1 FOR THE SHAFT STK #600859 SAME DWG AS 610875,610835 EXCEPT DIA.

DESCRIPTION:
IMPELLER, 19" DIA. W/O BACK VANES - P/N E00127E040


MISC:
312727 will make in India next time. Jan23,2017

DESCRIPTION:
IMPELLER, 20" DIA 400BHN 8V W/RINGS - P/N 312727  (CANADA PUMPS STANDARD P/N 3)

OEM PART#:
P/N 312727  (CANADA PUMPS STANDARD P/N 3)


DESCRIPTION:
IMPELLER, 19-1/2" DIA 430BHN 8V W/RINGS - P/N 312727  (CANADA PUMPS STANDARD P/N 3)


DESCRIPTION:
IMPELLER, 21-1/2" DIA 400BHN 8V W/RINGS - P/N 312727  (CANADA PUMPS STANDARD P/N 3)


DESCRIPTION:
COVER, SUCTION SIDE - P/N D02084E000-1228


DESCRIPTION:
NUT, IMPELLER - P/N 314786 ( (CANADA PUMPS STANDARD P/N 15)

OEM PART#:
P/N 314786 ( (CANADA PUMPS STANDARD P/N 15)


DESCRIPTION:
RING, SPACER CASING - P/N 319182  (CANADA PUMPS STANDARD P/N 9)

OEM PART#:
P/N 319182  (CANADA PUMPS STANDARD P/N 9)


DESCRIPTION:
SEAL CAGE SPLIT - P/N 312901  (CANADA PUMPS STANDARD P/N 14A)

OEM PART#:
P/N 312901  (CANADA PUMPS STANDARD P/N 14A)


DESCRIPTION:
HOUSING, BRACKET & CAP, BEARNG  - P/N 410465  (CANADA PUMPS STANDARD P/N 23 & 33)

OEM PART#:
P/N 410465  (CANADA PUMPS STANDARD P/N 23 & 33)


DESCRIPTION:
BUSHING, THROAT  - P/N 310939  (CANADA PUMPS STANDARD P/N 11)

OEM PART#:
P/N 310939  (CANADA PUMPS STANDARD P/N 11)


DESCRIPTION:
SHAFT, 10X12DSH STD ALL SEALS 3.50" DIA.  (CANADA PUMPS STANDARD P/N 8 & 14A)


DESCRIPTION:
SCREW, IMPELLER NUT LOCKNG  (CANADA PUMPS STANDARD P/N 16A)


MISC:
SAME AS 610824 EXCEPT FOR ADDED LABYSEAL (May7,2017.Windalco didn't use the laby seal)

DESCRIPTION:
HOUSING, BRACKET & CAP, BEARNG C/W LABYSEAL - P/N G-4316  (CANADA PUMPS STANDARD P/N 22, 23, 30E & 33)

OEM PART#:
P/N G-4316  (CANADA PUMPS STANDARD P/N 22, 23, 30E & 33)


MISC:
NITRIL 90 DUROMETER  (SEE DWG 1714B-J1 FOR ALUMINUM BRONZE MATERIAL RING)


MISC:
#2 LIME MILL 6' X 22 HARDINGE MILL 08-ME-02

DESCRIPTION:
BAR, LIFTER, HEAT RESISTANT  - P/N 165-11BNA


DESCRIPTION:
RING, CASING - P/N 660648  (CANADA PUMPS STANDARD P/N 9)

OEM PART#:
P/N 660648  (CANADA PUMPS STANDARD P/N 9)


DESCRIPTION:
IMPELLER, 25-1/2" DIA., 400BHN 5V W/RING - P/N 314995  (CANADA PUMPS STANDARD P/N 3 & 4)

OEM PART#:
P/N 314995  (CANADA PUMPS STANDARD P/N 3 & 4)


DESCRIPTION:
IMPELLER, 26" DIA., 400BHN 5V W/RING -  P/N 314995  (CANADA PUMPS STANDARD P/N 3 & 4)


DESCRIPTION:
SHAFT, FLXSL STD - P/N 312542  (CANADA PUMPS STANDARD P/N 7)

NOTES:
SHAFT USES SKF 3313 BEARINGS, #45STL=$600.00

OEM PART#:
P/N 312542  (CANADA PUMPS STANDARD P/N 7)


MISC:
SHAFT DWG #9056-J1. John quoted $560 05/15

DESCRIPTION:
SLEEVE,  6" LONG STD  (CANADA PUMPS STANDARD P/N 9)


DESCRIPTION:
SLEEVE, SHAFT - P/N G-6973  (CANADA PUMPS STANDARD P/N 8)

OEM PART#:
P/N G-6973  (CANADA PUMPS STANDARD P/N 8)


DESCRIPTION:
COVER, CASING SPLIT REMOVABLE  - P/N 412481  (CANADA PUMPS STANDARD P/N 2 & 2A)

OEM PART#:
P/N 412481  (CANADA PUMPS STANDARD P/N 2 & 2A)


DESCRIPTION:
IMPELLER, 20" DIA W/O BACK VANE - P/N E00049E0401228

NOTES:
SAME DRAWING AS STOCK NUMBERS 600875 EXCEPT DIAMETER


DESCRIPTION:
SHAFT, FLXSL + SLEEVE - P/N 312542  (CANADA PUMPS STANDARD P/N 8 & 8A)

OEM PART#:
P/N 312542  (CANADA PUMPS STANDARD P/N 8 & 8A)


DESCRIPTION:
RING, CASING - P/N SK2138-AJ - P/N 213719  (CANADA PUMPS STANDARD P/N 9)

OEM PART#:
P/N SK2138-AJ - P/N 213719  (CANADA PUMPS STANDARD P/N 9)


DESCRIPTION:
IMPELLER, 22-3/8" DIA 400BHN 8V W/RINGS - P/N 312727  (CANADA PUMPS STANDARD P/N 3 & 4)

OEM PART#:
P/N 312727  (CANADA PUMPS STANDARD P/N 3 & 4)


DESCRIPTION:
IMPELLER, 21" DIA 400BHN 8V W/RINGS - P/N 312727  (CANADA PUMPS STANDARD P/N 3 & 4)


DESCRIPTION:
HOUSING, BRACKET & CAP, BEARING - P/N 313922


DESCRIPTION:
IMPELLER, 8-1/2" DIA W/RING - P/N G-6401R  (CANADA PUMPS STANDARD P/N 3 & 3A)

OEM PART#:
P/N G-6401R  (CANADA PUMPS STANDARD P/N 3 & 3A)


MISC:
B4 FRAME SEE DWG #9025-J1 FOR THE IMPELLER STK #600875


DESCRIPTION:
RING, CASING - P/N G-3006R  (CANADA PUMPS STANDARD P/N 9)

OEM PART#:
P/N G-3006R  (CANADA PUMPS STANDARD P/N 9)


DESCRIPTION:
BOLT, GLAND SWING & NUT - P/N 311806  (CANADA PUMPS STANDARD P/N 13A & 13B)

OEM PART#:
P/N 311806  (CANADA PUMPS STANDARD P/N 13A & 13B)


DESCRIPTION:
COVER, BEARING INBOARD - P/N G-6189  (CANADA PUMPS STANDARD P/N 24)

OEM PART#:
P/N G-6189  (CANADA PUMPS STANDARD P/N 24)


DESCRIPTION:
COVER, BEARING OUTBOARD - P/N G-6190  (CANADA PUMPS STANDARD P/N 25)

OEM PART#:
P/N G-6190  (CANADA PUMPS STANDARD P/N 25)


DESCRIPTION:
FLINGER, INBOARD - P/N G-1045  (CANADA PUMPS STANDARD P/N 18A)

OEM PART#:
P/N G-1045  (CANADA PUMPS STANDARD P/N 18A)


DESCRIPTION:
NUT, IMPELLER - P/N G-1971R2  (CANADA PUMPS STANDARD P/N 15)

OEM PART#:
P/N G-1971R2  (CANADA PUMPS STANDARD P/N 15)


DESCRIPTION:
SCREW, FOR IMPELLER - P/N G-6402A  (CANADA PUMPS STANDARD P/N 15A)

NOTES:
(37031-QTY.4)**PRICES SOLD TO WINDALCO $10.00.**

OEM PART#:
P/N G-6402A  (CANADA PUMPS STANDARD P/N 15A)


DESCRIPTION:
KEY, IMPELLER (CANADA PUMPS STANDARD P/N 17 & 17B)


DESCRIPTION:
RING, LANTERN SEAL CAGE  -  P/N 312899  (CANADA PUMPS STANDARD P/N 14)

OEM PART#:
P/N 312899  (CANADA PUMPS STANDARD P/N 14)


DESCRIPTION:
IMPELLER, 21-1/2" DIA. 400Bhn  3V W/RING - P/N  (CANADA PUMPS STANDARD P/N 3, 3A & 4)

OEM PART#:
P/N  (CANADA PUMPS STANDARD P/N 3, 3A & 4)


DESCRIPTION:
BUSHING, THROAT  - P/N G-7189  (CANADA PUMPS STANDARD P/N 11)

OEM PART#:
P/N G-7189  (CANADA PUMPS STANDARD P/N 11)


DESCRIPTION:
IMPELLER, 9" DIA W/RING - P/N G-6401R  (CANADA PUMPS STANDARD P/N 3, 3A & 4)

OEM PART#:
P/N G-6401R  (CANADA PUMPS STANDARD P/N 3, 3A & 4)


DESCRIPTION:
IMPELLER, 9-1/2" DIA 400BHN W/RING - P/N G-6401R  (CANADA PUMPS STANDARD P/N 3, 3A & 4)

NOTES:
(37031 QTY. 2) **PRICE SOLD TO WINDALCO $987.25**  INVOICE CAME TO US.


DESCRIPTION:
IMPELLER, 9-3/4" DIA 400BHN W/RING  - P/N G-6401R (CANADA PUMPS STANDARD P/N 3, 3A & 4)

OEM PART#:
P/N G-6401R (CANADA PUMPS STANDARD P/N 3, 3A & 4)


DESCRIPTION:
IMPELLER, 10" DIA W/RING - P/N G-6401R (CANADA PUMPS STANDARD P/N 3, 3A & 4)


DESCRIPTION:
IMPELLER, 10-3/8" DIA W/RING - P/N G-6401R (CANADA PUMPS STANDARD P/N 3, 3A & 4)


DESCRIPTION:
IMPELLER, 11-1/2" DIA W/RING  - P/N G-6401R (CANADA PUMPS STANDARD P/N 3, 3A & 4)


DESCRIPTION:
FLINGER, OUTBOARD - P/N G-1051 (CANADA PUMPS STANDARD P/N 18B)

OEM PART#:
P/N G-1051 (CANADA PUMPS STANDARD P/N 18B)


DESCRIPTION:
RING, IMPELLER WEAR - P/N G-5808 (CANADA PUMPS STANDARD P/N 3, 3A & 4)

OEM PART#:
P/N G-5808 (CANADA PUMPS STANDARD P/N 3, 3A & 4)


DESCRIPTION:
CASING, C/W  - P/N 410292-3 (CANADA PMUPS STANDARD P/N 2)

OEM PART#:
P/N 410292-3 (CANADA PMUPS STANDARD P/N 2)


DESCRIPTION:
RING, CASING - P/N G-3006R (CANADA PMUPS STANDARD P/N 9)

OEM PART#:
P/N G-3006R (CANADA PMUPS STANDARD P/N 9)


DESCRIPTION:
BOLT, GLAND SWING & NUT - P/N 310349  (CANADA PMUPS STANDARD P/N 13A & 13B)

OEM PART#:
P/N 310349  (CANADA PMUPS STANDARD P/N 13A & 13B)


DESCRIPTION:
GLAND, SPLIT - P/N 310501  (CANADA PMUPS STANDARD P/N 12A)

OEM PART#:
P/N 310501  (CANADA PMUPS STANDARD P/N 12A)


DESCRIPTION:
LANTERN RING, SEAL CAGE  - P/N 312899  (CANADA PMUPS STANDARD P/N 14)

OEM PART#:
P/N 312899  (CANADA PMUPS STANDARD P/N 14)


DESCRIPTION:
SLEEVE, SHAFT - 43HRC  (CANADA PMUPS STANDARD P/N 8)


DESCRIPTION:
BUSHING, THROAT  - P/N G-7189  (CANADA PMUPS STANDARD P/N 11)

OEM PART#:
P/N G-7189  (CANADA PMUPS STANDARD P/N 11)


DESCRIPTION:
IMPELLER, 11-1/2" DIA - P/N 310402  (CANADA PMUPS STANDARD P/N 3 &3A)

OEM PART#:
P/N 310402  (CANADA PMUPS STANDARD P/N 3 &3A)


DESCRIPTION:
NUT, IMPELLER - P/N G-1971R2  (CANADA PMUPS STANDARD P/N 15)

OEM PART#:
P/N G-1971R2  (CANADA PMUPS STANDARD P/N 15)


DESCRIPTION:
SCREW, IMPELLER NUT LOCKING - P/N G-6402A  (CANADA PMUPS STANDARD P/N 16A)

OEM PART#:
P/N G-6402A  (CANADA PMUPS STANDARD P/N 16A)


DESCRIPTION:
THROAT BUSHING - P/N 312469  (CANADA PMUPS STANDARD P/N 11)

OEM PART#:
P/N 312469  (CANADA PMUPS STANDARD P/N 11)


DESCRIPTION:
IMPELLER, 10-1/2" DIA  - P/N G-1973R  (CANADA PMUPS STANDARD P/N 3)

OEM PART#:
P/N G-1973R  (CANADA PMUPS STANDARD P/N 3)


DESCRIPTION:
SHAFT, FLXSL 10X12DS  (CANADA PMUPS STANDARD P/N 7)


DESCRIPTION:
SLEEVE, SHAFT - P/N 319341 (CANADA PUMPS STANDARD P/N 8)

OEM PART#:
P/N 319341 (CANADA PUMPS STANDARD P/N 8)


MISC:
SLEEVE DWG #9043-J1 IMPELLER DWG #4014-J1/R4

DESCRIPTION:
SHAFT, FLXSL + SLEEVE RH - P/N 319339 (CANADA PUMPS STANDARD P/N 7 & 7C)

OEM PART#:
P/N 319339 (CANADA PUMPS STANDARD P/N 7 & 7C)


MISC:
SEE DWG #9029-J1 STK #610863 FOR SHORT SLEEVE (7.5") & SHAFT DWG#9028-J1 STK #610861

DESCRIPTION:
SLEEVE, SHAFT STD LNGTH 10-1/8" - P/N 312543 (CANADA PUMPS STANDARD 7)


DESCRIPTION:
IMPELLER, 8-3/8" DIA. 2ND STAGE CW  - P/N G-7457


DESCRIPTION:
IMPELLER, 8-3/8" DIA. 3RD STAGE CW  - P/N G-7457


DESCRIPTION:
IMPELLER, 8-3/8" DIA. 4TH STAGE CW  - P/N G-7457


DESCRIPTION:
CASING, W/STUFFING BOX DWG#411335  (CANADA PMUPS STANDARD P/N 2, 2A & 6)


DESCRIPTION:
RING, WEAR CASING - P/N 312517  (CANADA PMUPS STANDARD P/N 9)

OEM PART#:
P/N 312517  (CANADA PMUPS STANDARD P/N 9)


DESCRIPTION:
BOLT,CLAMPING BAR PN 26-117-194-002 (REPLACES P/N 4010-0)


DESCRIPTION:
STAND, PEDESTAL & CAP (CANADA PUMPS STANDARD P/N 22 & 23)


DESCRIPTION:
GASKET, SUCTION (CANADA PUMPS STANDARD P/N 65A)


DESCRIPTION:
TUBE, BOILER S.W. 2" O.D. X 0.134" X 28' LONG


MISC:
3.525" X 5.00 LONG X 2.195" I.D. WITH 3/16" SPIRAL OIL GROOVE


DESCRIPTION:
FLINGER, OUTBOARD (CANADA PUMPS STANDARD P/N 18B)


DESCRIPTION:
RING, KEY PROTECTING - P/N 312125  (CANADA PMUPS STANDARD P/N 48)

OEM PART#:
P/N 312125  (CANADA PMUPS STANDARD P/N 48)


DESCRIPTION:
SLEEVE, SHAFT STD LENGTH 6" - P/N 312129  (CANADA PMUPS STANDARD P/N 8)

OEM PART#:
P/N 312129  (CANADA PMUPS STANDARD P/N 8)


DESCRIPTION:
BUSHING, THROAT - G-3004  (CANADA PMUPS STANDARD P/N 11)


DESCRIPTION:
IMPELLER, 11-3/4" DIA 400BHN 3V - P/N 319181A  (CANADA PMUPS STANDARD P/N 3 & 3A)

OEM PART#:
P/N 319181A  (CANADA PMUPS STANDARD P/N 3 & 3A)


DESCRIPTION:
IMPELLER, 12-1/2" DIA 400BHN 3V C/W BVL RNG - P/N 319181A (CANADA PMUPS STANDARD P/N 3 & 3A)


DESCRIPTION:
RING, IMPELLER WEAR - P/N 312728 440bhn (CANADA PMUPS STANDARD P/N 4)

OEM PART#:
P/N 312728 440bhn (CANADA PMUPS STANDARD P/N 4)


MISC:
BOLT ON TYPE SPECIAL FOR CEFILAC SEAL USE.

DESCRIPTION:
BOX, STUFFING FOR CEFILAC SEAL SERIES - P/N SK-EW-111-JK


DESCRIPTION:
BOLT & NUT, GLAND SWING TYPE  - P/N G-1254 (CANADA PMUPS STANDARD P/N 13A & 13B)

OEM PART#:
P/N G-1254 (CANADA PMUPS STANDARD P/N 13A & 13B)


DESCRIPTION:
FLINGER, INBOARD - P/N G-1250 (CANADA PMUPS STANDARD P/N 18A)

OEM PART#:
P/N G-1250 (CANADA PMUPS STANDARD P/N 18A)


DESCRIPTION:
NUT, IMPELLER RH - P/N G-2090 (CANADA PMUPS STANDARD P/N 15)

OEM PART#:
P/N G-2090 (CANADA PMUPS STANDARD P/N 15)


DESCRIPTION:
NUT, IMPELLER L/SCREW RH  - P/N G-5520 (CANADA PMUPS STANDARD P/N 15 & 15A)

OEM PART#:
P/N G-5520 (CANADA PMUPS STANDARD P/N 15 & 15A)


MISC:
5/8" x 5/8" x 5-1/2" long mild steel material

DESCRIPTION:
KEY, IMPELLER (CANADA PMUPS STANDARD P/N 17 & 17B)


DESCRIPTION:
LANTERN RING, SPLIT, SEAL CAGE- P/N 313103 (CANADA PMUPS STANDARD P/N 14A)

OEM PART#:
P/N 313103 (CANADA PMUPS STANDARD P/N 14A)


DESCRIPTION:
BUSHING, THROAT   - P/N G-3025 (CANADA PMUPS STANDARD P/N 11)

OEM PART#:
P/N G-3025 (CANADA PMUPS STANDARD P/N 11)


DESCRIPTION:
IMPELLER, 14-1/4" DIA 3V W/RING  - P/N G-6831 ((CANADA PMUPS STANDARD P/N 3, 3A & 4)

OEM PART#:
P/N G-6831 ((CANADA PMUPS STANDARD P/N 3, 3A & 4)


DESCRIPTION:
IMPELLER, 15-1/4" DIA 3V W/RING  - P/N G-6831 (CANADA PMUPS STANDARD P/N 3, 3A & 4)

OEM PART#:
P/N G-6831 (CANADA PMUPS STANDARD P/N 3, 3A & 4)


DESCRIPTION:
IMPELLER, 16" DIA 3V W/RING  - P/N G-6831 (CANADA PMUPS STANDARD P/N 3, 3A & 4)


DESCRIPTION:
IMPELLER, 16-1/2" DIA 3V W/RINGS - P/N G-6831 (CANADA PMUPS STANDARD P/N 3, 3A & 4)


DESCRIPTION:
RING, IMPELLER  - P/N G-6832 (CANADA PMUPS STANDARD P/N 4)

OEM PART#:
P/N G-6832 (CANADA PMUPS STANDARD P/N 4)


DESCRIPTION:
ASSEMBLY DRAWING, CANADA PUMPS 4X6 DSH - P/N 464926


MISC:
SHOWS PARTS AND ASSY VIEW OF DSH PUMPS. READ WITH X-131 FOR PART NAMES ATTACHED TO THIS DWG.

DESCRIPTION:
DSH CUTVIEW/PARTS LIST DRAWING - P/N 660648


DESCRIPTION:
RING, CASING - P/N G-1882 OLD STYLE (CANADA PMUPS STANDARD P/N 9)

OEM PART#:
P/N G-1882 OLD STYLE (CANADA PMUPS STANDARD P/N 9)


DESCRIPTION:
SLEEVE,  BEARING SPACER  -  P/N 310908 (CANADA PMUPS STANDARD P/N 41)

OEM PART#:
P/N 310908 (CANADA PMUPS STANDARD P/N 41)


DESCRIPTION:
COVER, BEARING OUTBOARD - P/N G-6337 (CANADA PMUPS STANDARD P/N 25)

OEM PART#:
P/N G-6337 (CANADA PMUPS STANDARD P/N 25)


DESCRIPTION:
FLINGER, INBOARD - P/N 310910 (CANADA PMUPS STANDARD P/N 18A)

OEM PART#:
P/N 310910 (CANADA PMUPS STANDARD P/N 18A)


DESCRIPTION:
FLINGER, OUTBOARD -  P/N 210592 (CANADA PMUPS STANDARD P/N 18B)

OEM PART#:
P/N 210592 (CANADA PMUPS STANDARD P/N 18B)


DESCRIPTION:
NUT, IMPELLER L/SCREW  - P/N 315130 (CANADA PMUPS STANDARD P/N 16A)

OEM PART#:
P/N 315130 (CANADA PMUPS STANDARD P/N 16A)


DESCRIPTION:
KEY, IMPELLER (CANADA PMUPS STANDARD P/N 3 & 3A)


DESCRIPTION:
BOLT & NUT, GLAND SWING  - P/N 310340 (CANADA PMUPS STANDARD P/N 13A &13B)

OEM PART#:
P/N 310340 (CANADA PMUPS STANDARD P/N 13A &13B)


DESCRIPTION:
BUSHING/SLEEVE, INTERSTAGE DIAHPRAGM 375-400BHN  - P/N 311343


DESCRIPTION:
BUSHING, INTERSTAGE DIAPHRAGM - P/N 311342


DESCRIPTION:
IMPELLER, 7-1/2" DIA 400BHN 4V CW - P/N 311334


DESCRIPTION:
IMPELLER, 7-1/2" DIA 400BHN 4V CCW - P/N 311334


DESCRIPTION:
IMPELLER, 9" DIA 400BHN 4V C/W - P/N 311334

NOTES:
JULY/11 SOLD FOR $493.00, ** PATTERN PRICE 486.00**


DESCRIPTION:
GLAND, SPLIT (CANADA PMUPS STANDARD P/N 12 & 12A)


DESCRIPTION:
KEY, IMPELLER (CANADA PMUPS STANDARD P/N 17B)


DESCRIPTION:
COVER, BEARING INBOARD (CANADA PMUPS STANDARD P/N 24)


DESCRIPTION:
FRAME FOOT (CANADA PMUPS STANDARD P/N 252)


DESCRIPTION:
COVER, HAND HOLE SUCTION - P/N G-2919 (CANADA PMUPS STANDARD P/N 42A)

OEM PART#:
P/N G-2919 (CANADA PMUPS STANDARD P/N 42A)


DESCRIPTION:
BEARING SEAL PLATE INBOARD   - P/N G-6161


DESCRIPTION:
BEARING SEAL PLATE OUTBOARD - P/N G-6160


DESCRIPTION:
IMPELLER, 15-3/4" DIA W/RINGS - P/N G-4369


DESCRIPTION:
IMPELLER, 17-3/4" DIA W/RINGS - P/N G-4369


DESCRIPTION:
IMPELLER, 16-1/2" DIA W/RINGS - P/N G-4369


DESCRIPTION:
IMPELLER, 16-1/2" DIA., 400Bhn 3V W/RNG  - P/N 314992 (CANADA PMUPS STANDARD P/N 3, 3A & 4)

OEM PART#:
P/N 314992 (CANADA PMUPS STANDARD P/N 3, 3A & 4)


DESCRIPTION:
IMPELLER, 18" DIA., 400Bhn 3V W/RINGS  - P/N 314992 (CANADA PMUPS STANDARD P/N 3, 3A & 4)


DESCRIPTION:
IMPELLER, 20" DIA., 400Bhn 3V W/RING - P/N 314992 (CANADA PMUPS STANDARD P/N 3, 3A & 4)


DESCRIPTION:
IMPELLER, 23" DIA., 400Bhn 3V W/RING  - P/N 314992 (CANADA PMUPS STANDARD P/N 3, 3A & 4)


DESCRIPTION:
IMPELLER, 16-1/2" DIA., 400Bhn 3V W/RINGS  - P/N 314992 (CANADA PMUPS STANDARD P/N 3, 3A & 4)


DESCRIPTION:
IMPELLER, 19-1/2" DIA 400BHN 3V W/RINGS - 314992 (CANADA PMUPS STANDARD P/N 3, 3A & 4)


DESCRIPTION:
IMPELLER, 15-1/2" DIA 400BHN 3V W/RINGS (CANADA PMUPS STANDARD P/N 3, 3A & 4)


DESCRIPTION:
RING, IMPELLER WEAR - P/N (CANADA PMUPS STANDARD P/N 4)


DESCRIPTION:
RING, SPACER - P/N 214701 HARD CHROME (CANADA PMUPS STANDARD P/N 121)

OEM PART#:
P/N 214701 HARD CHROME (CANADA PMUPS STANDARD P/N 121)


DESCRIPTION:
SHAFT, FLXSL 10X12-22.5 S (CANADA PUMPS STANDARD P/N 7)


DESCRIPTION:
SHAFT, FLXSL STD - P/N 312542 (CANADA PUMPS STANDARD P/N 7)

OEM PART#:
P/N 312542 (CANADA PUMPS STANDARD P/N 7)


DESCRIPTION:
COVER, BEARING INBOARD - P/N 312537 (CANADA PUMPS STANDARD P/N 24)

OEM PART#:
P/N 312537 (CANADA PUMPS STANDARD P/N 24)


DESCRIPTION:
COLLAR, BEARING -  P/N 311035 (CANADA PUMPS STANDARD P/N 35B)

OEM PART#:
P/N 311035 (CANADA PUMPS STANDARD P/N 35B)


DESCRIPTION:
FLINGER, OUTBOARD - P/N 312540 (CANADA PUMPS STANDARD P/N 18B)

OEM PART#:
P/N 312540 (CANADA PUMPS STANDARD P/N 18B)


DESCRIPTION:
FLINGER, INBOARD - P/N 310020 (CANADA PUMPS STANDARD P/N 18A)

OEM PART#:
P/N 310020 (CANADA PUMPS STANDARD P/N 18A)


DESCRIPTION:
SEAL CAGE SPLIT  - P/N 312902 (CANADA PUMPS STANDARD P/N 14A)

OEM PART#:
P/N 312902 (CANADA PUMPS STANDARD P/N 14A)


DESCRIPTION:
THROAT BUSHING - P/N 316549 (CANADA PUMPS STANDARD P/N 11)

OEM PART#:
P/N 316549 (CANADA PUMPS STANDARD P/N 11)


DESCRIPTION:
KEY, IMPELLER (CANADA PUMPS STANDARD P/N 17B)


DESCRIPTION:
IMPELLER, 18" DIA 400BHN 8V W/ RINGS - P/N 312727 (CANADA PUMPS STANDARD P/N 4)


DESCRIPTION:
IMPELLER, 18-3/8" DIA 400BHN 8V W/RINGS - P/N 312727 (CANADA PUMPS STANDARD P/N 4)


DESCRIPTION:
IMPELLER, 18-3/4" DIA 400BHN 8V W/RINGS - P/N 312727 (CANADA PUMPS STANDARD P/N 4)


DESCRIPTION:
SHAFT, & PLASMAS SLV - P/N 312542 (CANADA PUMPS STANDARD P/N 9)

OEM PART#:
P/N 312542 (CANADA PUMPS STANDARD P/N 9)


DESCRIPTION:
DRAWING OF SHAFTS USED AT WINDALCO PLANTS - A-OE-724-AJ-1


DESCRIPTION:
SEAL CAGE SPLIT  - P/N 314313 (CANADA PUMPS STANDARD P/N 14A)

OEM PART#:
P/N 314313 (CANADA PUMPS STANDARD P/N 14A)


DESCRIPTION:
THROAT BUSHING - P/N 314065 (CANADA PUMPS STANDARD P/N 11)

OEM PART#:
P/N 314065 (CANADA PUMPS STANDARD P/N 11)


MISC:
SHAFT DWG #9027-J1, IMPELLER DWG #4014-J1/R4

DESCRIPTION:
NUT, IMPELLER RH - P/N 314061 (CANADA PUMPS STANDARD P/N 15)

OEM PART#:
P/N 314061 (CANADA PUMPS STANDARD P/N 15)


DESCRIPTION:
RINGS DWG, WEAR & CLEARANCE FOR WINDALCO PUMPS - A-OE-724-AJ-2


MISC:
SHAFT DWG #9027-J1  IMPELLER DWG #4014-J1/R4

DESCRIPTION:
NUT, IMPELLER LH - P/N 314061 (CANADA PUMPS STANDARD P/N 15)


DESCRIPTION:
SHAFTS DWG, ALL SIZES USED AT WINDALCO - A-OE-724-AJ-3


MISC:
SHAFT DWG #9027-J1,WEAR RING DWG #9012-J1

DESCRIPTION:
IMPELLER, 17-5/8" DIA., 400BHN 5V W/RING - P/N 314995 (CANADA PUMPS STANDARD P/N 3 & 4)


MISC:
SHAFT DWG #9027-J1, WEAR RING DWG #9012-J1

DESCRIPTION:
IMPELLER, 18-5/8" DIA., 400BHN 5V W/RING - P/N 314995 (CANADA PUMPS STANDARD P/N 3 & 4)


DESCRIPTION:
IMPELLER, 19-3/4" DIA. 400BHN 5V W/RING - P/N 314995 (CANADA PUMPS STANDARD P/N 3 & 4)


DESCRIPTION:
IMPELLER, 21" DIA., 400BHN 5V W/RING - P/N 314995 (CANADA PUMPS STANDARD P/N 3 & 4)


DESCRIPTION:
IMPELLER, 21-1/4" DIA., 400BHN 5V W/RING - P/N 314995 (CANADA PUMPS STANDARD P/N 3 & 4)


DESCRIPTION:
IMPELLER, 19" DIA., 400BHN 5V W/RING - P/N 314995 (CANADA PUMPS STANDARD P/N 3 & 4)


DESCRIPTION:
RING, WEAR IMPELLER - P/N 314996 (CANADA PUMPS STANDARD P/N 4)

OEM PART#:
P/N 314996 (CANADA PUMPS STANDARD P/N 4)


MISC:
SUPERSEDES DWG #660460 DATED 1968 INTMPE DWG #9061-J1

DESCRIPTION:
DRAWING OF PARTS LIST & SECTIONAL  - P/N 1992


DESCRIPTION:
RING, CASING - BEVEL - P/N 211452 (CANADA PMUPS STANDARD P/N 9)

OEM PART#:
P/N 211452 (CANADA PMUPS STANDARD P/N 9)


DESCRIPTION:
RING, IMPELLER WEAR  - P/N 212850 (CANADA PMUPS STANDARD P/N 4)

OEM PART#:
P/N 212850 (CANADA PMUPS STANDARD P/N 4)


DESCRIPTION:
IMPELLER, 9" DIA W/RING-BEVEL - P/N 262146 (CANADA PMUPS STANDARD P/N 3, 3A & 4)

OEM PART#:
P/N 262146 (CANADA PMUPS STANDARD P/N 3, 3A & 4)


DESCRIPTION:
IMPELLER, 9-1/4" DIA 400BHN W/RING-BEVEL - P/N 262146 (CANADA PMUPS STANDARD P/N 3, 3A & 4)


DESCRIPTION:
IMPELLER, 9-1/2" DIA 400BHN W/RING-BEVEL - P/N 262146 (CANADA PMUPS STANDARD P/N 3, 3A & 4)


DESCRIPTION:
IMPELLER, 9-3/4" DIA 400BHN W/RING-BEVEL - P/N 262146 (CANADA PMUPS STANDARD P/N 3, 3A & 4)


DESCRIPTION:
IMPELLER, 10" DIA W/RING - P/N 262146 (CANADA PMUPS STANDARD P/N 3, 3A & 4)


DESCRIPTION:
IMPELLER, 10-3/8" DIA W/RING-BEVEL - P/N 262146 (CANADA PMUPS STANDARD P/N 3, 3A & 4)


DESCRIPTION:
IMPELLER, 10-3/4" DIA W/RING-BEVEL - P/N 262146 (CANADA PMUPS STANDARD P/N 3, 3A & 4)


DESCRIPTION:
IMPELLER, 11-3/4" DIA W/RING-BEVEL - P/N 262146 (CANADA PMUPS STANDARD P/N 3, 3A & 4)


DESCRIPTION:
COVER, BEARING OUTBOARD (CANADA PMUPS STANDARD P/N 25)


DESCRIPTION:
RING, IMPELLER WEAR - P/N 311992 (CANADA PMUPS STANDARD P/N 4)

OEM PART#:
P/N 311992 (CANADA PMUPS STANDARD P/N 4)


DESCRIPTION:
SHAFT - P/N 319343 (CANADA PMUPS STANDARD P/N 7)

OEM PART#:
P/N 319343 (CANADA PMUPS STANDARD P/N 7)


DESCRIPTION:
CASING, STFNG BOX, MDFD, 10X12S - P/N 412214-5 (CANADA STANDARD P/N 2, 2A & 6)

OEM PART#:
P/N 412214-5 (CANADA STANDARD P/N 2, 2A & 6)


DESCRIPTION:
IMPELLER, 21" DIA 400BHN 8V W/RINGS - P/N 312727 (CANADA PUMPS STANDARD P/N 3& 4)

OEM PART#:
P/N 312727 (CANADA PUMPS STANDARD P/N 3& 4)


DESCRIPTION:
STUD & NUT, GLAND (CANADA PMUPS STANDARD P/N 13 & 13B)


DESCRIPTION:
RING, CASING WEAR G-3006R (CANADA PMUPS STANDARD P/N 9)


DESCRIPTION:
IMPELLER, 9" DIA 400BHN 4V CCW - P/N 311334 (CANADA PMUPS STANDARD P/N 3 & 3A)

NOTES:
SEE DWG #9107-J1 FOR CW IMPELLER, 4 VANES

OEM PART#:
P/N 311334 (CANADA PMUPS STANDARD P/N 3 & 3A)


DESCRIPTION:
CASING & COVER - P/N 410338 (CANADA PMUPS STANDARD P/N 2 & 2A)

OEM PART#:
P/N 410338 (CANADA PMUPS STANDARD P/N 2 & 2A)


DESCRIPTION:
BOLT, 3/4" C/WITH FLAT WASHER - P/N K25-8305GR5


DESCRIPTION:
MANHOLE PLATE, W=450, L=435, C/W REINFORCEMENT #K35-4324-102


DESCRIPTION:
GASKET, CASING (CANADA PMUPS STANDARD P/N  65)


DESCRIPTION:
FRAME, BEARING - (CANADA PMUPS STANDARD P/N 22)


DESCRIPTION:
COVER, BEARING OUTBOARD. 400BHN - P/N G-6190 (CANADA PMUPS STANDARD P/N 25)

OEM PART#:
P/N G-6190 (CANADA PMUPS STANDARD P/N 25)


DESCRIPTION:
RING, CASING WEAR - 213230 (CANADA PMUPS STANDARD P/N 9)


NOTES:
SAME DRAWING AS STOCK NUMBER 600835 EXCEPT DIAMETER


MISC:
S1XCR-60TC/SC/EP/316SS3, ONE PIECE SLEEVE, PRESSED IN FACES FOR 10X12S TO REPLACE 611307 SLRY DYNMICS


DESCRIPTION:
INTERMEDIATE SHAFT, LENGTH 103", DIAMETER 5-15/16". KEY WAYS AT BOTH ENDS, 1-1/2" X12"


DESCRIPTION:
IMPELLER, 20-1/4" DIA W/O BACK VANES - P/N E00127E012-1228


DESCRIPTION:
IMPELLER, 20-1/2" DIA W/O BACK VANES - P/N E00127E012-1228


MISC:
M.A.W.P. 1360 PSIG @ 200 DEGREE F, M.D.M.T 20 DEGREE F @ 1360 PSIG, CALCULATED VOLUME 736" CUBE


DESCRIPTION:
STABILIZER, SUCTION 25 GLN 110PSIG @ 200F


NOTES:
NOTE: VERIFY DWG#1018 J4 BEFORE MANUFACTURING TO SEE IF ACCORDING TO LATEST REVISION


NOTES:
NOTE: VERIFY DWG#1017 J4 EFORE MANUFACTURING TO SEE IF ACCORDING TO LATEST REVISION


NOTES:
*******CHECK ALPART DWG RV#4 BEFORE MANUFACTURING. ( CHECK RV #5 BEFORE MANUFACTURING)


NOTES:
WEAR RING FOR THIS IMPELLER IS DWG #8001107-J4


MISC:
SHAFT DWG#9027-J1, WEAR RING DWG #9012-J1

DESCRIPTION:
IMPELLER, 26 1/2" DIA., 400BHN 5V W/RING - P/N 341995 (CANADA PUMPS STANDARD P/N 4)

OEM PART#:
P/N 341995 (CANADA PUMPS STANDARD P/N 4)


MISC:
B3 FRAME 1079 GPM @ 85'TDH, 1000RPM SG 1.36 TEMP 146 DEG.F USING 60HP MOTOR

DESCRIPTION:
CLAMP, BEARING HSG FRAME B3 - P/N C00813E000-2201


MISC:
AS 568-472, B3 FRAME 1079GPM @ 85'TDH SG1.36, 1000RPM PUMP USING 60HP,


MISC:
AS568-468, B3 FRAME 1079GPM @ 85'TDH SG1.36, 1000RPM PUMP USING 60HP,


MISC:
AS568-462, B2 FRAME 800GPM @ 100'TDH SG1.55, 1000RPM PUMP USING 60HP,


MISC:
B2 FRAME 800GPM @ 140'TDH SG1.3, 1500RPM PUMP USING 125HP,


MISC:
AS 568-460, B2 FRAME 800GPM @ 100'TDH SG1.55, 1000RPM PUMP USING 60HP,


DESCRIPTION:
COVER, STUFFING BOX - P/N D00213E0001055


MISC:
USES BEARINGS SKF #21320 ( 215mm) RADIAL & TIMKEN TDO-93400 (112mm) THRUST


DESCRIPTION:
STUDS, GLAND (CANADA PMUPS STANDARD P/N 13)


DESCRIPTION:
PLATE, BEARING - P/N 212013 (CANADA PMUPS STANDARD P/N 30A)

OEM PART#:
P/N 212013 (CANADA PMUPS STANDARD P/N 30A)


DESCRIPTION:
IMPELLER, 17" DIA. 3V 400BHN - P/N 411744 (CANADA PMUPS STANDARD P/N 3)

OEM PART#:
P/N 411744 (CANADA PMUPS STANDARD P/N 3)


DESCRIPTION:
IMPELLER, 11-3/4"DIA 3V 400BHN - P/N 411744 (CANADA PMUPS STANDARD P/N 3)


DESCRIPTION:
IMPELLER, 22-1/2" DIA 400BHN 8V W/RINGS - P/N 312727 (CANADA PMUPS STANDARD P/N 3 & 4)

OEM PART#:
P/N 312727 (CANADA PMUPS STANDARD P/N 3 & 4)


DESCRIPTION:
IMPELLER, 20-1/2" DIA., 400BHN W/RING - P/N 213717B (CANADA PMUPS STANDARD P/N 3 & 4)

OEM PART#:
P/N 213717B (CANADA PMUPS STANDARD P/N 3 & 4)


DESCRIPTION:
CASING, W/STUFFING BOX -P/N 511163 (CANADA PMUPS STANDARD P/N 2, 2A & 6)

OEM PART#:
P/N 511163 (CANADA PMUPS STANDARD P/N 2, 2A & 6)


DESCRIPTION:
LUBE SUPPLY LINE PRESSURE GAGE KIT - P/N 04-121668


DESCRIPTION:
RING, SPACER - P/N 211453 (CANADA PMUPS STANDARD P/N 121)

OEM PART#:
P/N 211453 (CANADA PMUPS STANDARD P/N 121)


DESCRIPTION:
SCREW, LOCKING - (CANADA PMUPS STANDARD P/N 15A)


DESCRIPTION:
BEARING BALL, RADIAL (CANADA PMUPS STANDARD P/N 26)


MISC:
B4 POWER FRAME, TIMKEN#23032CC O.D. =  9.4488/240mm      I.D. = 6.2992/160mm SPHERICAL ROLLER BEARING


NOTES:
CUP AND CONE SET, 2 REQUIRED, ONE FOR EACH END OF THE CRANK SHAFT.


DESCRIPTION:
PLATE, HEAD 27-7/8" long. 165-65K 8FT DIA. BALL MILL


DESCRIPTION:
BAR, LIFTER 165-110 BNA, (13 USED EACH TIME)


DESCRIPTION:
BAR, LIFTER, SHELL, 165-125RNA 840MM LONG


MISC:
OLD CROFT GB FOOT PRINT = 940mm x 635mm CENTER TO CENTER FOOT PRINT PATTERN. NEW = 950mm x 475mm

DESCRIPTION:
REDUCER,  GEAR BOX MPGB450, RATIO 7.48:1


DESCRIPTION:
TUBE, SEAMLESS 22' L X 1.98/2.00 WT 12BWG(2.77MM)


MISC:
FLEX BUSHING NEOPRENE INSERT FOR DRIVE SHAFT. LORD MFG #BJ-1205


DESCRIPTION:
NOZZLE, SPIRAL TARGET CROSS FLOW #368-3738-084


DESCRIPTION:
DRIFT ELIMINATOR 6ft Long X 10in High X 6in Wide #D25142

NOTES:
BRENTWOOD COOLING TOWER PARTS AWCT09701, #CF150MAX155.25X12X72-RPVC-DG


DESCRIPTION:
CROSS BAR, 1.625 X 1 X 4' LONG (REPLACES WOOD)


MISC:
ALPHA III CROSS FLOW SPLASH GRID. 12 GUAGE WIRE HANGER PVC COATED.


MISC:
CTD-42FR-8. FRP CASING PANELS, 4.2 Corrugated. CUT TO SIZES 46.5" X 19.5" for INLET VANES ON OUTSIDE TOWER 9166-J1

DESCRIPTION:
PANEL, SIDE WALL CRGTD, 12 OZ. 42" X 150"

NOTES:
GLASTEEL MFG. 42L12SL0430015000, 4.2 CORIGATED 12OZ SBS LT GRAY 42 X 150


DESCRIPTION:
CORNER MOLD, L SHAPE 6" X 6" X 96" FIRE RETARDENT

NOTES:
MFG. GLASTEEL CNR ROLL GR 12OZ SBS GRAY 12 X 96 #CRG12SNG129909602


DESCRIPTION:
CLOSURE STRIP, BLK/NPRN 4.2 CRGTD, BOX 300' LONG


MISC:
SPECIAL LUBRICANT Lomu + 410SS TRIM PTFE/VITON

DESCRIPTION:
PLUG VALVE, 6" ASA 125# C.I. PLG, WRNCH, LoMu LUBE

NOTES:
FACE TO FACE = 267MM WITH 279MM DIA. FLANGES


MISC:
VALVE IS A216WCB BODY, SPECIAL LUBRICANT Lomu + 410SS TRIM PTFE/VITON

DESCRIPTION:
PLUG VALVE, 3" ASA 125# C.I. PLG, WRNCH, LoMu LUBE

NOTES:
FACE TO FACE 203MM X ANSI 125 FLANGES 184MM DIA.


DESCRIPTION:
PLUG VALVE, 10" ASA 125# C.I. PLG, WRNCH, LoMu LUBE


DESCRIPTION:
VALVE, DISC LP VALVES ONLY  P/N 1002-2255-00


DESCRIPTION:
VALVES, BUFFER DISC LP & HP  P/N 1000-4688


DESCRIPTION:
SHAFT, LOWER W/BUSHINGS INTMPE #8037A-J1


DESCRIPTION:
IDLER ROLLER  (ADAPTATION) INTMPE DWG#4024-J1


DESCRIPTION:
GASKET, FRAME END, PLATE  P/N 16-506-007


DESCRIPTION:
SEAL-BUNA N.  75-7/8" LONG FOR GROOVE DWG #2183-J1


DESCRIPTION:
PLUG VALVE, 12" ASA 125# C.I. PLG, WRNCH, LoMu LUBE


DESCRIPTION:
SHAFT, 10X12S STD ALL SEALS 2.75" DIA. (CANADA PUMPS STANDARD P/N 7)


DESCRIPTION:
SHAFT, 12X14S STD ALL SEALS 3.875 DIA.(CANADA PUMPS STANDARD P/N 7)


MISC:
DWG #510342/7 DUCTILE IRON 600 IS 280 BHN WITH 600,000# TENSILE STRENGTH

DESCRIPTION:
CASING,  C/W BEARING UNITS 430BHN  - P/N 510342/7


DESCRIPTION:
VALVE, SUCTION F55 SS.WG, GAS-102-969-AO5


DESCRIPTION:
SEALER,DISCHARGE END A=60,B=16,C=10 P/N K 400003


DESCRIPTION:
LIFTER BAR 165-11 BNA,HEAT RESISTANT RUBBER. #2


DESCRIPTION:
MANHOLE COVER PLATE ITEM 11 PP55: 55 X 266 X 393 PP


DESCRIPTION:
DISCHARGE HEAD LIFTER BAR, ITEM 17 LFW 150 X 115


MISC:
B2 BEARING FRAME. ASSY IS SHAFT, LOCK WASHER & NUT


MISC:
2 in one set. Air cost (8sets) India to Kingston $270

NOTES:
3 layer - steel(MS) -Copper Alloy- Babbitt lining.Load bearing capacity this bearing is more.


DESCRIPTION:
SEAL, MECHANICAL CEFILAC GPA 60.35 D264.00


DESCRIPTION:
SEAL, MECHANICAL CEFILAC GPA 78 D 276.00


DESCRIPTION:
SEAL, MECHANICAL CEFILAC GPA 108 D 270.00


DESCRIPTION:
SEAL, MECHANICAL CEFILAC GPA D 172.00 CCR 7R


MISC:
FOR 10X12DSH CANADA PUMP. COMPLETE SEAL STK #611601


MISC:
FOR 4X6DSH CANADA PUMP. COMPLETE SEAL STK #611605

DESCRIPTION:
KIT, SEAL REPAIR #38SMXS3-17N3VS3 2-3/8"


MISC:
FOR 10X12S CANADA PUMP. COMPLETE SEAL STK #611606

DESCRIPTION:
KIT, SEAL REPAIR #44SMSX2-17N3VS3 2-3/4"


MISC:
FOR 12X14S CANADA PUMP. COMPLETE SEAL STK #611609

DESCRIPTION:
KIT, SEAL REPAIR #62SMSX2-17N3VS3 3-7/8"


MISC:
FOR 3X4DS CANADA & GOULDS 3196 PUMP. COMPLETE SEAL STK #611610


MISC:
FOR 5500 B4 GOULDS PUMP. COMPLETE SEAL STK #611617

DESCRIPTION:
KIT, SEAL REPAIR #84FHDS3-S17N3XS3 5-1/4"


MISC:
FOR 5500 B3 GOULDS PUMP. COMPLETE SEAL STK #611619

DESCRIPTION:
KIT, SEAL REPAIR #66FHDS3-S17N3XS3 4-1/8"


MISC:
FOR 4x6 NI-HARD CANADA PUMP. COMPLETE SEAL STK #611620


MISC:
FOR 5500 B3 GOULDS PUMP. COMPLETE SEAL STK #611616


MISC:
NON-ASBESTOS MATERIAL. 463.55mm x 398.78mm x 1/8”  NA1122; GRLK37

DESCRIPTION:
GASKET, CASING COVER (CANADA PUMPS STANDARD P/N 65)


MISC:
GASO TRPLEX PLUNGER PUMP, 6GE-160118-332

DESCRIPTION:
SHIM SET, CONN. ROAD BRG. Z3220 GAS-100570-000.


MISC:
B3 POWER END; 60 HP RATED AND INCLUDES, BEARING HOUSING, SHAFT, BEARINGS, COVERS AND SEALS.


MISC:
B2 BEARING FRAME MECHANICAL SEAL OIL SEAL #416706


NOTES:
SAE 783, which is Aluminium - Tin - Copper Lead free material F820.


MISC:
1.75" I.D. X 0581 X 058H JOHN CRANE 5610QXO(58)H SILICON CARBIDE VS SILICONE CARBIDE WITH VITON O-RINGS


MISC:
BEARING SURFACE COATED WITH COLMONOY
BEARING SURFACE COATED WITH COLMONOY FUSED COATING

DESCRIPTION:
TAIL SHAFT, 3" DIA X 21" LNG 13" CLMNY BRG.


MISC:
SEE STOCK #610984 FOR REPAIR KIT COST $174.00 FROM CHINA. SEE DWG #8001057-J1 (12 SHEETS FOR ALL PARTS


DESCRIPTION:
SLEEVE, SHAFT - P/N G-6973 (CANADA PUMPS STANDARD P/N 8)

OEM PART#:
P/N G-6973 (CANADA PUMPS STANDARD P/N 8)


MISC:
The tensile strength of GCr15 is 1617(MPa).

NOTES:
**NOTE: VERIFY DWG#1052-J4 BEFORE MANUFACTURING TO SEE IF ACCORDING TO LATEST REVISION.**


NOTES:
NOTE: VERIFY INTMPE DWG #1001-J4 BEFORE MANUFACTURING TO SEE IF ACCORDING TO LATEST REVISION.


NOTES:
**NOTE: CHECK DWG#1044-J4 FOR LATEST REVISION BEFORE MANUFACTURING.**


NOTES:
*NOTE: VERIFY DWG#1043-J4 BEFORE MANUFACTURING TO SEE IF ACCORDING TO LATEST REVISION.*


NOTES:
**NOTE:VERIFY DWG#1050-J4 BEFORE MANUFACTURING TOSEE IF ACCORDING TO LATEST REVISION.**


NOTES:
***NOTE: CHECK DWG#1128-J4 BEFORE MANUFACTURING TO SEE ACCORDING TO LATEST REVISION***


NOTES:
***CHECK FOR LATEST REVISION BEFORE MANUFACTURING.***


DESCRIPTION:
FLINGER, PUMP SIDE,  P/N Y-212B157DX1-228AC


DESCRIPTION:
FLINGER, COUPLING SIDE, P/N Y-2MFL157AX1


MISC:
D13 EPDM SLEEVE, AIR ACTUATED,  316SS GATE, 150# FLANGE


MISC:
FOR PRECIP B/C TRAIN P/N KGD10ACB6D13R14 (01/99 VF)    KNIFGAT/316SS/EPDM/150#/AIR ACT.


MISC:
FOR OIL INJECTION LANCE YO92 TO YO95. IT.37 P/L IT.22-Y-90


DESCRIPTION:
SEAL, COUPLING END LABY OIL #1801A112D1AE001


MISC:
SHIM REF. 257A P/N Y-1437D257AX1 BETWEEN END COVER & BEARING HOUSING


MISC:
Replaced with G6DH w/3in 150# suction and 2.5in diameter bore 900# square, Flange discharge IMO Pump

DESCRIPTION:
PUMP, LOW PRESSURE SUCTION 3"x 150# FLANGE DISCHARGE 2- 2 1/2 " Diameter bore, 900#flange for heavy fuel oil usage


MISC:
ATLOY OVERSIZE HAZELTON PUMP MODEL 10BS-CTS MUD LAKE BOOSTER PUMP. (WAS P/N 14533C * S3/98 ES)


MISC:
FOR HAZELTON PUMP MODEL 10BS-CTX MUD LAKE BOOSTER PUMP. OLD P/N 12450-08394. (S 7/98 ROX)


MISC:
FOR HAZELTON PUMP MODEL 10BS-CTX MUD LAKE BOOSTER PUMP. OLD P/N 12449 & 568756-007. (S 10/98 ROX)


DESCRIPTION:
SPRING, COMPRESSION P/N 814430-030.625  X 1L #50 CAP


NOTES:
***NOTE: CHECK DWG#1061-J4 FOR LATEST REVISION BEFORE MANUFACTURING.***


NOTES:
QUALITY STEEL FOUNDRIES EDMONTON 780-434-7565. JOHN AMAR QUOTE #11142 AUG 30/2000 $680.00 + PATTERN TOOLING $4,100.00


NOTES:
***********VERIFY DRAWING TO OEM CHANGES IN DRAWING********


NOTES:
WHEN PRODUCING, MAKE PATTERN TO MAXIMUM DIAMETER & MACHINE DOWN TO DIAMETER ORDERED


NOTES:
WAS OLD NUMBER 5601753007; 450kgs/ea with packaging


NOTES:
**NOTE: VERIFY DWG#1201-J4 BEFORE MANUFACTURING TO SEE IF ACCORDING TO LATEST REVISION.***


DESCRIPTION:
IMPELLER, 4V 25" DIA RH #046513G010 CLOSED


NOTES:
**NOTE: CHECK LATEST REVISION OF DWG#1056-J4 BEFORE MANUFACTURING.**


NOTES:
*NOTE: CHECK LATEST REVISION OF DWG#1054-J4.


NOTES:
**NOTE: CHECK DWG#1051-J4 FOR LATEST REVISION BEFORE MANUFACTURING.**


NOTES:
******VERIFY DRAWING, WAS REVISED ON 12/2000**********


NOTES:
*NOTE: CHECK DWG#1049-J4 FOR LATEST REVISION BEFORE MANUFACTURING.*


NOTES:
**NOTE: VERIFY DWG#1047-J4 BEFORE MANUFACTURING TO SEE IF ACCORDING TO LATEST REVISION.**


NOTES:
**NOTE: CHECK DWG#1045-J4 FOR LATEST REVISION BEFORE MANUFACTURING.**


NOTES:
***NOTE: CHECK DWG#1117-J4 FOR LATEST REVISION BEFORE MANUFACTURING.***


MISC:
MADE BY McKENZIE SPECIALTY CASTING 4047          *********(VERIFY MATERIAL TYPE)*********

NOTES:
ALPART80896 IGL $1099 Jun'18, 2% discount, actual $1077.02


MISC:
PATTERN AT TOWNLEY,(606060) ASTM A216WCB


MISC:
3/8" X7/16" NO. 109A2-A-45 ALLEN SET SCREWS


MISC:
316SS HARD SURFACED WITH PLEXUS BORIDE CARBIDE ALLOY


MISC:
NEW #62729413 FITS PUMPS 4X17LP & 10X17LP ALSO MATERIAL CAN BE GLASS FILLED URETHANE


MISC:
HT TO ROCKWELL 600 BRINELL ASTM A532 CLASS III, KmTBCr26


MISC:
SURFACED WITH PLEXUS BORIDE CARBIDE ALLOY


MISC:
HARD SURFACED WITH PLEUS BORIDE CARBIDE ALLOY, HGM #3408


MISC:
HARD SURFACED WITH PLEXUS BORIDE CARBIDE ALLOY (NICKEL-CHROME-BORON)


NOTES:
**************CHECK DRAWING BEFORE PRODUCING, REVISION HAS CHANGED TO #2 ON ALPART DWG.


NOTES:
***NOTE: SEE DWG#1118-J4 FOR LATEST REVISION BEFORE MANUFACTURING.***


NOTES:
NOTE: VERIFY DWG#1041-J4 BEFORE MANUFACTURING TO SEE IF ACCORDING TO LATEST REVISION.


NOTES:
*NOTE: CHECK DWG#1039-J4 FOR LATEST REVISION BEFORE MANUFACTURING.*


NOTES:
*NOTE: CHECK DWG#1038-J4 FOR LATEST REVISION BEFORE MANUFACTURING*


NOTES:
***NOTE: VERIFY DWG#1234-J4 BEFORE MANUFACTURING TO SEE IF ACCORDING TO LATEST REVISION.***


DESCRIPTION:
KEY, STEP TYPE FOR LEVER & CRANK #N-12306


NOTES:
*NOTE: VERIFY DWG 21-5125-M-SK/R6  BEFORE MANUFACTURING TO SEE IF ACCORDING TO LATEST REVISION*


NOTES:
*NOTE: CHECK DWG#1042-J4 FOR LATEST REVISION BEFORE MANUFACTURING.*


NOTES:
***CHECK DWG#1316-J4 FOR LATEST REVISION BEFORE MANUFACTURING.***


NOTES:
***NOTE: CHECK DWG#1317-J4 FOR LATEST REVISION BEFORE MANUFACTURING.***


NOTES:
***NOTE: CHECK DWG#1067-J4 FOR LATEST REVISION BEFORE MANUFACTURING.***


NOTES:
*NOTE: CHECK DWG#1040-J4 FOR LATEST REVISION BEFORE MANUFACTURING.*


NOTES:
*****REVISED TO RV#6, CHECK DRAWING BEFORE MFG.********


NOTES:
***NOTE: CHECK DWG#1224-J4 FOR LATEST REVISION BEFORE MANUFACTURING.***


NOTES:
***NOTE:  VERIFY DWG#1070-J4 FOR LATEST REVISION BEFORE MANUFACTURING.***


NOTES:
***NOTE: CHECK DWG#1068-J4 FOR LATEST REVISION BEFORE MANUFACTURING.***


DESCRIPTION:
WASHER, THRUST FOR RIGHT HAND HOUSING ASS., #109942 HGM


DESCRIPTION:
HOUSING, SEC. GEAR STD.. P/N21000A, EIMCO P/N SA-UN-11566-


DESCRIPTION:
HOUSING, WORM GEAR ,#X012336 P/L72782A30


DESCRIPTION:
IMPELLER, 23" DIA DIA RH #046157G01A1228


NOTES:
***VERIFY DWG BEFORE PRODUCING, WAS REVISED IN 12/2000**PATTERN COST. 205.00 US


NOTES:
Outer $590.00 + pattern 560.00,  Inner 70.00 + pattern 115.00  material 316


NOTES:
NOTE: VERIFY INTMPE DWG#1004 J4 BEFORE MANUFACTURIING TO SEE IF ACCORDING TO LATEST REVISION


NOTES:
STD ALLOYS DWG #P04-3159  ( CHECK FOR RV2)


MISC:
AIR ACTUATED 150LB FLANGES UNFLOW SYSTEM


MISC:
FOR PRECIP B/C TRAIN P/N KGD12-AC-B6D14  (S 01/99 VF)

DESCRIPTION:
VALVE, 12" 316SS KNIFE, NITRIL HTP SLVS AIR 150# FLANGE


MISC:
AIR ACTUATED 316 STAINLESS STEEL GATE 150# FLANGE  FOR PERCIP B/C TRAIN P/N KGD8ACB6D13R14 (S 01/99 VF)

DESCRIPTION:
VALVE, EPDM SLV, 316SS GATE, 150# FLNG AIR ACT.


MISC:
COULD ALSO ORDER CD4MCU MATERIAL, (606061)

NOTES:
WEAR RING FOR THIS IMPELLER IS DWG #8001107-J4; COMPETITIOR $14786.20, 2012


MISC:
ALPART PN.08800.4    (quote from India w/ support disc of PP w/o metal ring inside $410

DESCRIPTION:
SLEEVE, 16 INCH W/ INTGRL SPRT DISC P.N.08800.3


MISC:
ALPART DWG 21-5187-M-SK MATERIAL IS HIGH LEAD BRONZE


NOTES:
FINAL DETAIL WHEN ORDER RECEIVED TO COMPLETE THE DRAWING.


NOTES:
FINAL DETAIL WHEN ORDER RECEIVED TO COMPLETE THE DRAWING.
As the discharge trunion is highly similar to the feed trunion, only the sketch for the discharge unit is attached. Please note that the customer will have to provide access to sample trunions if we were to be asked to supply same. The customer drawing was used to develop our drawing 8001112-J4 but due to lack of detail on it (customer sketch), a few assumptions had to be made; in my view these will not overly affect the price.

In summary, please quote the following:

    72" x 12" bushing - qty 2
    Discharge trunion for 10' 6" x 16' 6"ball mill - qty 1
    Feed trunion for 10' 6" x 16' 6"ball mill - qty 1


NOTES:
*NOTE: VERIFY DWG#1037-J4 BEFORE MANUFACTURING TO SEE IF ACCORDING TO LATEST REVISION*


NOTES:
21-5114 replaces 21-5005 and intmMPE DRWG 2042-J4


NOTES:
***NOTE: VERIFY DWG#1060-J4 BEFORE MANUFACTURING TO SEE IF ACCORDING TO LATEST REVISION.***


NOTES:
***NOTE: CHECK DWG#1066-J4 FOR LATEST REVISION BEFORE MANUFACTURING.***


NOTES:
**NOTE: VERIFY DWG#1069-J4 BEFORE MANUFACTURING TO SEE IF ACCORDING TO LATEST REVISION.***


NOTES:
***CHECK DWG#1073-J4 BEFORE MANUFACTURING TO SEE LATEST REVISION.****


DESCRIPTION:
IMPELLER, 25-1/2" DIA W/INTEGRAL WEAR RING

NOTES:
***NOTE: CHECK DWG#1073-J4 BEFORE MANUFACTURING TO SEE LATEST REVISION.***


NOTES:
from GIW_Canada_GIW dwg#1995C-00-0065D; GIW SAP#02526509; price from factory $125, markup to $155


MISC:
EXTENSION SPRING, 1/8" X 10-5/8" WITH END HOOKS, LABYRINTH **NOTE** 3-15/16" P/N 90259-03-48STP,


MISC:
SHAFT 3.938", 7.315" FLANGE, DOUBLE ROTOR, FOR DRIVE END


MISC:
SHAFT 3.938", 7.835" FLANGE, DOUBLE ROTOR, FOR WET END


MISC:
CAP MOUNTED CLUTCH FOR BALL MILL SLURRY MIX, CRITICAL


DESCRIPTION:
SHOE SET, FRICTION ASSY. P/N 414590 (20/SET)


MISC:
BUNA N RUBBER SEAT, CENTER TYPE VALVE HEAVY DUTY WAFER TYPE

DESCRIPTION:
VALVE, BUTTERFLY RESLIENT SEATED LEVER OP.


MISC:
AIR ACTUATOR EPDM ENCAPSULATED SLEEVE WITH EPDM RETAINER FLANGES


MISC:
AIR ACTUATED EPDM ENCAPSULATED SLEEVE ITH EPDM RETAINER FLANGES 150# FLANGE 17-4PH SS GATE


MISC:
(SS) FITTED IN THRUST BEARING END COVER,  FOR G.I.W PUMP-MODEL 18 X 18 LSA 44-2044D S/N 5012-5618 TO 5621

NOTES:
OD=9.244 INCHES X ID=6.442 X HEIGHT 2.586 INCHES


MISC:
(SS) FITTED IN RADIAL  BEARING END COVER,  FOR G.I.W PUMP-MODEL 18 X 18 LSA 44-2044D S/N 5012-5618 TO 5621

NOTES:
OD=9.244 INCHES X ID=6.442 X HEIGHT 2.015 INCHES


MISC:
MAT'L 316 SS AND  HARD SURFACED WITH PLEXUS BORIDE CARBIDE ALLOY


MISC:
ASH CROFT 636 OAH, FOR 983D   BEARING ASSEMBLY 6-7/16"


MISC:
CAIR EQUAL VALVE; SEE QUOTE FILE IN ALPART FOLDER FOR TECHNICAL & DRAWING

DESCRIPTION:
BALL, VALVE 8" 150LB HCSCHRPLTD/TFEDBLSTD/LVR


MISC:
Trunnion Mounted Ball Valve, API 6D, full bore, body: A105, ball: A105+ENP, seat: TEFLON, lever operated

DESCRIPTION:
VALVE, BALL FULL BORE A105+ENP TFE SEAT LVR


MISC:
Valve Special Bayonet Slurry Drain 6x4 inches, 150 lb V-711, Stockham S-15-D 150 X 150 (B10/92)


MISC:
V-704 Bayonet Slurry Ad-6062 Cast Carbon Steel 90 deg. Plain Bearing Dual Handle Operated


DESCRIPTION:
COVER, END COUPLING SIDE P/N X2RCM160 AX2


MISC:
MUD LAKE BOOSTER PUMP. OLD P/N 014629-P14629 (S3/98 ES)

DESCRIPTION:
SPACER, RING THRUST BEARING P/N 575534-026


MISC:
REF 160B MATERIAL . OLD P/N 202PNX-208B160AX2-866

DESCRIPTION:
BEARING, COVER PLAIN END, P/N  X-208B160AX2-816  (S 7/90)


MISC:
REF 88 MATERIAL 9. OLD P/N *Y-250D88SX1 (S 2/99 ROX)


MISC:
ASTM A532/A CLASS III 58-63RC, 600 BRINELL


NOTES:
*******CHECK ALPART DWG RV#1 BEFORE MANUFACTURING*********


MISC:
NOTE: MATERIAL CHANGE TO MONEL. (606195)


DESCRIPTION:
IMPELLER, W/RINGS OD 12-3/4" DIA #3X12A3AX2A-813


NOTES:
*******CHECK ALPART DWG RV#2 BEFORE PRODUCTION**** MATERIAL CHANGE +


NOTES:
increase SP to $482. $579 to AlPart 07/18


DESCRIPTION:
LINER, LIQUID CYLINDER REF#73 14.000" O.D.


MISC:
MATERIAL CAN BE: ASTM A532-65a CLASS III TYPE A.


MISC:
MATERIAL TYPES: STEM = AISI 1018, DISC = ASTM A36 WCB W/STELLITE #6 OVERLAY


NOTES:
VERIFY INTMPE DWG#1007 J4 BEFORE MANUFACTURING TO SEE IF ACCORDING TO LATEST REVISION


NOTES:
NOTE: VERIFY INTMPE DWG#1008J4 BEFORE MANUFACTURING TO SEE IF ACCORDING TO LATEST REVISION


NOTES:
NOTE: VERIFY DWG#1024 J4 BEFORE MANUFACTURING TO SEE IF ACCORDING TO LATEST REVISION


NOTES:
NOTE: VERIFY INTMPE DWG#1025 J4 BEFORE MANUFACTURING TO SEE IF ACCORDIING TO LATEST REVISION


NOTES:
VERIFY DWG#1027-J4 BEFORE MANUFACTURING TO SEE IF ACCORDING TO LATEST REVISION


NOTES:
NOTE: VERIFY DWG#1030-J4 BEFORE MANUFACTURING TO SEE IF ACCORDING TO LATEST REVISION


NOTES:
***NOTE: CHECK DWG#1235-J4 FOR LATEST REVISION BEFORE MANUFACTURING.***


NOTES:
***NOTE: CHECK DWG#1300-J4 FOR LATEST REVISION BEFORE MANUFACTURING***


NOTES:
***NOTE: CHECK DWG#1301-J4 FOR LATEST REVISION BEFORE MANUFACTURING.***


NOTES:
***NOTE: CHECK DWG#4101-J4 FOR LATEST REVISION BEFORE MANUFACTURING.**


NOTES:
**NOTE: CHECK DWG#1053-J4 BEFORE MANUFACTURING TO SEE IF ACCORDING TO LATEST REVISION.**


NOTES:
***NOTE CHECK DWG#1255-J4 FOR LATEST REVISION BEFORE MANUFACTURINE.****


NOTES:
****************CONFIRM ROTATION OF IMPELLER WHEN ORDERING****************


MISC:
ALTERNATE CAST MATERIAL HK40, LURGI DWG #D70142001L00001 YO92 TO  95 AS PER ALPART DRAWING 29-0000-M-SK-RO


NOTES:
***NOTE: CHECK FOR LATEST REVISION BEFORE MANUFACTURING***


NOTES:
****NOTE: CHECK DWG#1229-J4 FOR LATEST REVISION BEFORE MANUFACTURING.****


MISC:
MATERIAL 310 STAINLESS STEEL OR ITS CAST EQUIVALENT OF HK40 REF. LURGI DRAWING # D 70142001L00001 REVISED

NOTES:
NEW NOZZLE DESIGN TO REPLACE PARTS SHIPPED ON PO 818123 AND OUR INV #46027

NOZZLE FOR FLUID BED FURNACE COMPLETE ASSEMBLY CONSISTING OF ITEMS 1 2 3 & 4 MATERIAL 310 STAINLESS STEEL OR ITS CAST EQUIVALENT OF HK40 REF.LURGI DRAWING # D 70142001L00001 REVISED - QUALITY (120 EA EQUAL 1 SET) (MIN/MAX CHANGE A 12/98 WD) (61070589). 100 of Each


MISC:
TWO RECORDS FOR THIS STOCK#, UNDER TWO DIFFERENT DWG


MISC:
FOR OIL INJECTION LANCES YO92 TO YO95 ITEM 38-PARTS LIST ITEM 22-Y-90: 23-Y-90  
DRAWING NO. D LURGI CALCINELURGI DWG #D70142001L00001


MISC:
19 INCH DIAMETER ITEM #101 FOR B3 6*18-19 HEAD TANK PUMP


MISC:
L RAKE DRIVE IN CLARIFICATION AND SLURRY MIX

DESCRIPTION:
HOUSING, MAIN GEAR ITEM 1 ; P/N 112212A2A


MISC:
SAME AS DENVER IMPELLER EXCEPT HUB THREADS ARE 1-1/4" -12 UNF-2B R.H.

DESCRIPTION:
IMPELLER, OPEN 3X3 98-330-286-501 NELSON


DESCRIPTION:
LINER, FRAME PLATE/GLADULA, PLATO FORRADA F6036U02


MISC:
stuffing assy include: packing box, gland, bushing

NOTES:
cost $100 is for stuffing box assembly including packing box, gland & bushing


MISC:
NEW Length (RE: Mauro???). PLEASE ENSURE NEWEST LENGTH IS USED.


NOTES:
Chinese factory name "LINE SHAFT". OrderedQTY4-08/18


MISC:
FROM REQUEST BY FERNANDO LARA -Turbine Pump, 3280GPM@400FT TDH, effeciency 85.7%, 386BHP, bowls C.I.CL30, , flanged clumn 12"DIA@12'length,


NOTES:
COVER PLATE FH4013D21 $5390.10 WARMAN 2000 PRCBK


NOTES:
AKA: EXPELLER FH028D21 $501.30  WRMNPB 2000


MISC:
SQUARE BRADED ROPE SIZE 16mm X 16mm X 364mm LONG


MISC:
3mm thick x 190mm O.D. x 150mm I.D. NON ASBESTOS GASKET MATERIAL, CONTACT CUSTOMER FOR PREFERENCE


MISC:
3mm thick x 150mm O.D. x 100mm I.D. NON ASBESTOS GASKET MATERIAL, CONTACT CUSTOMER FOR PREFERENCE


MISC:
included in FASTENERS FOR PUMP / SIPF=LIFTING SCREW M20 (23)


MISC:
M16 NUT & M15 WASHER WITH HEX BOLT M16X150 MAKES ASSY


MISC:
OEM SAYS PHASE TO 39584 - SAME DRAWING #


NOTES:
TOOLING CHARGE FIRST ORDER FROM HEBEI, PRICE INCLUDES #


MISC:
34266 = 510 MATERIAL         IAECS DWG IS 31" TRIM TO 26"

NOTES:
HC-34 = TOWNLEY HI. CHROME 34%                   1516-C02 is 31" must Trim to 26"


NOTES:
*MUST SUPPLY METAL CORE FOR IRATHANE TO STRIP AND RE-COAT


DESCRIPTION:
IMPELLER, 13" DIA 3V 400BHN - P/N 411744


DESCRIPTION:
IMPELLER, 15" DIA 3V 400BHN - P/N 411744


DESCRIPTION:
IMPELLER, 16" DIA 400BHN 8V W/RINGS - P/N 312727


DESCRIPTION:
IMPELLER, 14" DIA 3V 400BHN - P/N 411744


NOTES:
SHELL HALF FOR RUBBBER LINER SUCTION SIDE 10"


NOTES:
TOOLING ON FIRST PART. PRICE INCLUDES ALSO ENGINE SIDE LINER #38634 TOOLING


NOTES:
NOTE: CMC COST INCLUDES PATTERN: BASE COST IS $2,475.00


NOTES:
SEE: SKETCH #1521-C02 SHOWS MODIFIED VANES


MISC:
NOTE: PART NUMBER IS FOR IMPELLER PRODUCED IN 510 NATURAL RUBBER

NOTES:
FOR GILDERSLEEVE ORDER TRIM IMPELLER TO 26" DIAMETER


MISC:
RETENEDOR,BALINERA / WITH RUBBER BEARING FOR SHAFT DIA. 2-3/16"


DESCRIPTION:
BOWL, INTERMEDIATE, 6724131  / TAZA,INTERMEDIARIA 6724131


MISC:
MODIFIED FOR CEFILAC SEAL    SLURRY PUMP  $690.00; 07/13

DESCRIPTION:
LINER, DRIVE SIDE 6" CFLC BORE - P/N 215372


DESCRIPTION:
CASING, PACKED BOX 400BHN - P/N 412214-5


DESCRIPTION:
COVER, CASING DRIVE SIDE - P/N 053-D-0002


DESCRIPTION:
LINER, DRIVE SIDE 500Bhn 3-1/2" STD BORE  - P/N 89


DESCRIPTION:
CASING, W/PKG BOX 280BHN  - P/N 510342/7


DESCRIPTION:
CASING, W/STUFFING BOX 220BHN - P/N 510180


DESCRIPTION:
IMPELLER, 11-3/4" DIA W/RING  - P/N G-6401R


DESCRIPTION:
SLEEVE, SHAFT PLASMA COATED - P/N 319344


DESCRIPTION:
IMPELLER, 22" DIA 3V 400BHN W/RING - P/N 314992


DESCRIPTION:
SLEEVE, SHAFT CHROME OXIDE PLASMA COATED - P/N 310908


DESCRIPTION:
IMPELLER, 20-1/2" DIA 430BHN 8V W/RINGS - P/N 312727


DESCRIPTION:
IMPELLER, 23-1/2" DIA., 400BHN 5V C/W W/RING - P/N 314995


DESCRIPTION:
IMPELLER, 18" DIA., 400BHN 5V W/RING - P/N 314995


DESCRIPTION:
IMPELLER, 14" DIA 400BHN 3V  C/W W/RING - P/N 319181A


DESCRIPTION:
IMPELLER, 13" DIA 400BHN 3V C/W W/RING - P/N 319181A


DESCRIPTION:
RING, IMPELLER WEAR - P/N 213209 440 Bhn


MISC:
DENVER PART #503459 & 50184. OUTBOARD BRG. CAP  ALLIS CHALMERS #98-331-901-801


MISC:
2.375 X 1.8745 X 3.6875" LONG STANDARD SLEEVE


MISC:
CONJUNTO,EJE, 503300; (INCLUDE ALL COMPONENTS IN OEM SHEET) SAME AS 98-200-038-501

NOTES:
"this part number is for the complete bearing assembly, this includes shaft, bearings and cylinder as we name it locally." Grosvin


DESCRIPTION:
LINER, GLAND SIDE 8X6 RBR 98-231-123-501


MISC:
TUBO,DESCARGA, C25SAB126, ABRASN RESIST part#20444; PHTSA#5364


MISC:
INTERCHANGEABLE A/C NAT RUBBER 98-231-123-501


MISC:
IMPULSOR,HULE NATURAL  23972/ HOLZ # 644-05191, $526.00 TO NYRSTAR, 04/13; SAME AS 21802; PHTSA#5082


MISC:
CAMISA, P/BALINERA 4"-1100SP (FOR V-DRV PUMPS)


NOTES:
INCREASE PRICE TO NYRSTAR FROM $532 TO $692.00(2/14), EG $875IGL, $965EU (7/18)


MISC:
NOTE: SAME SHAFT FITS MODEL LSA-25 SIZES 6X8 & 8X8


MISC:
21" DIA THROAT. Material is KmTBCr26 modified to meet 028G spec.

DESCRIPTION:
LINER, SUCTION 53.720" DIA.                     (DRAWING MUST BE VERIFIED)


NOTES:
*PIPE: A316 GR IP 316L  PLATE: A218 IP 316L


NOTES:
*PIPE: A316 GR IP 316L  PLATE: A218 GR IP 316L


NOTES:
*PIPE: A316 GR IP 316L   PLATE: A218 GR IP 316L


DESCRIPTION:
BEARING, RUBBER #BS-2 3/16" 60 DUROMETER

NOTES:
$180JM 11/16. Small item,shipping cost $50 (Re:Naomi Aug24 email 511524)


NOTES:
SOMARAKIS DWGS SUPPLIED FOR DIM./HEAD & BRG. HSG. 2163-D1(P1&P2) SUPPLIED AS AN ASSY


NOTES:
SOMARAKIS DWGS SUPPLIED FOR DIM./HEAD & BRG HSG 2163-D1(P1&P2) SUPPLIED AS AN ASSY


DESCRIPTION:
IMPELLER, 4V 23" DIA RH #046516G010 CLOSED


NOTES:
PACKING RING: 3/8" SQ. PACKING ANGLE CUT FOR 3-1/2" X 2-3/4"


NOTES:
*ROKIDE COATED: CHROME OXIDE SPRAY CERAMIC (92% CHR) 5-7 MICRON FINISH, 1400 KNOB HARDNESS. PRIMARY COAT IS NICKEL CHROME: 80-20.


NOTES:
$400.00 TOOLING CHARGE 38MM X 60MM/1.750X2.375X.386 7/16 C/S GREEN COLOR CODED


NOTES:
SIZE: 2-38/8" X 1-1/2" X 3/8" HEIGHT  STACK HEIGHT=3-1/8"               SERVICE: OIL ADDITIVES, NON ABBRASIVE     250-350 F                     10,000  P.S.I.G.  VIOLET MARKED


NOTES:
SIZE 2-3/8" X 1-23/32" X 5/16" HEIGHT, STACK hEIGHT=2-11/16"                SERVICE: OIL ADDITIVIES, NON ABBRASIVE                                    250-350 F         10,000 P.S.I.G.                                       GREEN MARKED


NOTES:
MARTIN ADJ HUB W/HDWR-$6.50//TB WOODS FLG w/INTEGRAL HUB $16.25


MISC:
NOTE: MUST ORDER SET OF COVER PLATE LINER AND FRAME PLATE LINER TOGETHER

NOTES:
NOTE: MUST ORDER SET OF COVER PLATE LINER AND FRAME PLATE LINER TOGETHER


MISC:
GLANDULA,PLATO FORRADA,F6036R26  / $1046; 10/14; OEM TO DISTRIBUTER: $1493.00 MP55=MR55


DESCRIPTION:
BEARING HOUSING ASSY COMPLETE assy not tapped


MISC:
OLD REF#607176 /OLD 59-15-0148 Drwg "CROSSHEAD ASSY"

NOTES:
**NOTE: CHECK DWG#1046-J4 FOR LATEST REVISION BEFORE MANUFACTURING.**


MISC:
12mm x 1.75 metric x 2" long. (1/2" long then collar then 1" long) SAME AS D023ME62


MISC:
12mm x 1.75 metric x 2" long. (1/2" long then collar then 1" long)  Same as D026ME62


MISC:
ANM PURCHASE    CHANGES UP TO D3147R38 OR D3147MR38


DESCRIPTION:
BOLT, GLAND W/NUT & WASHER, 1-37-07-01725


MISC:
TUERCA,LABERINTO,TL-061 / U/W-WARMAN PUMP 8X6 MDS7393


MISC:
OEM TO DISTRIBUTOR $15.54, 2007. SOLD 14.00 IN 2013


MISC:
WEIR #0344901130, SIZE 190mm x 90mm x 65mm Wide. Number NU2318M/ R009D-1


NOTES:
FACTORY SHIPS  8 PER SET. ACTUAL COST IS 1.50 PER SET OF 4


NOTES:
RING HEBEI SELLS 1 SET CONTAINING 4 ENDS @18.00=4.5/END


NOTES:
*ASTM-A-532-75A CLASS III TYPE A OEM US$


MISC:
EXPELLER,ALTA CROMADURA F028A05. OEM $937. TO DISTRIBUTOR $656.00, 2007


NOTES:
NOTE: FOR GILDERSLEEVE, REMOVE EXPELLER VANES "BR"


MISC:
SPACER, SHAFT  E117C21-INTMPE 162.00, 2/14


NOTES:
*ASTM-A-532-75A CLASS III TYPE A OEM US$2,803.7


MISC:
RING, PISTON HOOK STYLE / ACCESSORY KIT#K086EJ0036800E6


MISC:
ACCESSORY KIT#K108FB0246800E6         *** Note  Weir now only makes this in R38


MISC:
ACCESSORY KIT#K108FB0246800E6 #1029715. OEM TO DISTRIBUTOR: $355.37


MISC:
INSERT, FRAME PLATE LINER / quote $379 to Osca 10/15.


MISC:
PLATO,BOMBA,ARMAZON FORRADA,CROMADA / CHANGES UP TO #F6041-19MA05 WHICH COMES WITH #E10026ME62 LINER STUD


MISC:
ANILLO,EXPULSOR,ALTA CROMADURA /  765.00, 01/15

DESCRIPTION:
BUSHING, THROAT, ALTA CROMADURA F6083A05

NOTES:
*WARMAN AUSTRALIAN PRICE = AUD$1,819.00 X .61 = US$1,109.00


MISC:
IMPULSOR,BOMBA,ALTA-CROMADURA / $2420.00; 01/15. OEM $3476.05 IN 2007


NOTES:
*ASTM-A-532-75A CLASS III TYPE A OEM US$11,700.00 FOR R33 MAT.


MISC:
BEARING HOUSING ASSY., E005XLM SEVERE DUTY


DESCRIPTION:
LINER, FRAME PLATE INSERT( FERRAHENGCHANGM)


NOTES:
COMPLETE MEANS; 460V 3PHASE 125HP TEFC CLASS F MOTOR MODEL Y315M-6, STARTER WITH SWITCH FLOAT AND BRACKET FLOAT SWITCH AS WELL AS ACCESSORIES.


MISC:
TOWNLEY #F-0600-006, OEM TO DISTRIBUTOR:$2293.40. sold $1400.80 before nov.2015


NOTES:
WARMAN AUSTRALIAN PRICE = AUD$1,168.00 X .61 = US$712.00


NOTES:
ALTONA: US$1,340*A05 7/02 FOB BRASIL, oem sells for approx 3275.00


MISC:
4VCG REDUCED EYE, SUPPLY BACIS F6147A05, 0536-06145   1026980


NOTES:
SPECIAL ORDER FROM WARMAN, SELL FOR CAD$1,780.00


DESCRIPTION:
BEARING HOUSING ASSY COMPLETE 900MM not tapped


MISC:
E4032D21(FramePlate) $235. IF ORDER ONE SET FramePlate&CoverPlate, TOTAL cost $500.00


MISC:
BOLT, ADJUSTING W/NUTS; D001ME62 / SCREW, AJUSTING 3 NUT 2 WASHER D001ME62


MISC:
HIGH CHROME, ALTA CROMADURA MP55=MR55; stock#12054010 is for R26


NOTES:
X92=316SS SLEEVE, NICKLE CHROME BORON COATING (TUNGSTEN) RC59-62


NOTES:
HEBEI PRICE,  RFQ240000 IMP, IGL$5(8/16)


MISC:
W/G10026M LINER STUDS, 8 REQUIRED PER LINER SIZE M20X95


DESCRIPTION:
HOUSING, BEARING   14/12, 16/14 GAH, 20/18 GAM.


MISC:
SET CONSISTS OF: 5 SHIMS 0.1mm thk, 5 shims 0.2mm thk, 5 shims 0.4mm thk.


MISC:
SIZE: 76mm O.D. X 5.3mm CROSS SECTION  $25.99  05/11


DESCRIPTION:
BEARING HOUSING ASSY COMPLETE METRIC - 10


NOTES:
CMPTN-"INDUSTRIAL PUMPS SALES & SERVICE"    MIN 3  MAX 6


MISC:
LINER SEAL VOLUTE E4124S01  /sold to Nyrstar $32.00 09/15


MISC:
S01 is the only material this seal supplied in.


MISC:
GLAND SPLIT W/BOLTS & NUTS E044C23 / $68.00 , 06/12


DESCRIPTION:
1210FMR PUMP, BARE SHAFT IA05IMP/IR26LINER


NOTES:
PRICES: BARE SHAFT PUMP = us$717. ACCESSORIES (including base, grooved pulley and belt) US$370.00 Motor $580. Packing & Assembly $100.00


DESCRIPTION:
108FMR PUMP, BARE SHAFT IA05IMP/IR26LINER


MISC:
3/8" RATED 0 to 10000 PSIG FEMALE/FEMALE PIPE (ROUND STOCK CONFIGURATATION) P/N 2300 SERIES,  P/N 78-819-140

NOTES:
NATIONAL OILWELL (CIRCLE SEAL) NEW CHECK VALVE #2349R3PP. GENERANT IS EQUAL, SAME VALVE


MISC:
NOTE:LATEST DRAWING SHOWS 2" PIPE WELDED TO BOTH ENDS INSIDE THE PLUNGER & .906" CHANGED TO .938" GROOVE


MISC:
HOLD!!! DO NOT MANUFACTURE FROM DRAWING UNTIL REVIEW OF NECK AND STRENGTHENING OF ENDS.


DESCRIPTION:
BEARINGS, INTERMEDIATE  - P/N 65-101-980


NOTES:
*NOTE: VERIFY DWG#1035-J4 BEFORE MANUFACTURING TO SEE IF ACCORDING TO LATEST REVISION*


NOTES:
***NOTE CHECK FOR REVISION BEFORE MANUFACTURING.***


DESCRIPTION:
108STR PUMP, BARE SHAFT IR08IMP/IR26LINER


DESCRIPTION:
43CR PUMP SET, BARE SHAFT R55IMP/R55 LINER


DESCRIPTION:
108STMR PUMP, BARE SHAFT IA05IMP/IR26LINER


DESCRIPTION:
1614TUR BARE SHAFT PUMP, C/WITH R26 WET END.


MISC:
BASE, GUARD, V.D. PULLEYS, BELTS, COMPANION FLANGES


NOTES:
TOOLING COST FROM HEBEI ON FIRST ORDER, PRICE INCLUDES SUC LINER #36325


MISC:
NAT RUBBER LINERS, A05 IMPELLER & THROAT BUSHING WITH C26 ALLOY SLEEVE

NOTES:
* PRICE INCLUDES CR BASE, PULLEYS/BELTS/GUARD


MISC:
4 LUGS INSTEAD OF THE REGULAR 3, MACHINING IS DIFFERENT


MISC:
SAME AS E4147A05 EXCEPT FOR BCK FLD HUB AND EYE HUB EXPELLER VANE CHANGES PER 1554-C02


DESCRIPTION:
65QVSPM PUMP, BARE SHAFT C/W C.FLNGS 316SS 2' SUC PIPE


MISC:
SAME AS A/C #98-431-641-503 EXCEPT HUB THREADS ARE 2 LEAD IN ACME SIZE 2-1/2"-4 THRDS/INCH


MISC:
NOT SURE IF WILL INTERCHANGE WITH A/C. SAME AS 503566


MISC:
ACTUAL GOULDS PUMP FR WAJAX 4832.00 CAD / GOULDS TIGHT IN USA LOW MARGIN!!!

NOTES:
BIG BORE BOX FULL DIA IMPELLER AND NO SEAL OR PACKING


MISC:
6 SEULEMENT FOR ELEMENT N-EUPEX H125 S140


MISC:
SAME AS ALLIS CHALMERS  IMPELLER EXCEPT HUB THREADS ON A/C ARE DIFFERENT.


DESCRIPTION:
REPELLER COVER WITH WELDED ON COOLING JACKET


DESCRIPTION:
REPELLER COVER PLATE COATING TUNGSTEN CARBIDE


NOTES:
SAMPLE REQUIRED FOR FIRST ORDER, MINIMUM PURCHASE IS 5 PIECES


NOTES:
* PRICE INCLUDES CR BASE, PULLEYS/BELTS/GUARD SELL $13,424.00 + $6,500 ACCESS


MISC:
HUB THREADS ARE 1-1/4" - 7THREADS/INCH DOUBLE LEAD  $430.00 01/12


MISC:
P/N 48951  $1064.00 09/13  SAME AS 48911 EXCEPT FOR MATERIAL TYPE


NOTES:
HEBEI ASKS FOR DRAWING TO CONFIRM WHERE NOT TAPPED


MISC:
NOTE: SAMPLE REQUIRED TO COMPLETE DRAWING


MISC:
REV#1, CHANGED W/R DIAMETER TO 19.495" +.002 - .000


MISC:
16" HIGH X 17-1/2" DIA. 3-/14 BEARING CAVITY.


MISC:
17-1/2" DIA. X 16" HIGH X 15" DISCHARGE WITH 3-1/4" BORE FOR BEARING.


DESCRIPTION:
SLEEVE, SHAFT NI-HARD 280/340 BHN, 38884


DESCRIPTION:
PLATE, CLAMP / ABRAZADERA,DE PLATO, 38163


MISC:
FILL IN 12135-0 MATERIAL: HI-CHROME, LOW CARBON A33


DESCRIPTION:
LINER, GLAND SIDE 5X4; 504826  / GLANDULA, REVESTIMIENTO HULE MS


DESCRIPTION:
CASE, SUC. SIDE STD /CAJA,SUCCION,503179


DESCRIPTION:
CUBIERTA,BALINERA EXTERNA /COVER, OUTBOARD BEARING


MISC:
SAME AS A/C #98-431-651-501 EXCEPT HUB THREADS ARE 2" - 5 ACME R.H. DOUBLE ENTRY

NOTES:
KAN WEE PRODUCES ONLY A05 MATERIAL, FOR RUBBER IMPELLER ORDER FROM PIPSA


MISC:
SAME AS A/C #98-231-120-501 EXCEPT MATERIAL TYPE


MISC:
SAME AS A/C#98-231-134-501 & DENVER #51825  EXCEPT MATERIAL


NOTES:
$1087.50 IS SPECIAL PRICING TO NYRSTAR ONLY. KAN WEE PRODUCES ONLY A05 MATERIAL, FOR RUBBER IMPELLER ORDER FROM PIPSA


DESCRIPTION:
SEAL, MECHANICAL   /  SELLO MECANICO,10K13


MISC:
MARK III   1500RPM        TDH33FT           ***NOT AVAIL IN DCI OTHER THAN OEM***


MISC:
BLOCK KIT  P/N 24313BK REQUIRED TO RAISE MOTOR TO OEM CENTRE HEIGHT OF 10"


MISC:
TO RAISE MOTOR TO OEM CENTRE HEIGHT OF 10"


MISC:
SAME AS 38754 EXCEPT IT HAS ACME THREADS.

DESCRIPTION:
IMPELLER, 21" DIA 9-1/8 EYE, 3-1/2"-6UN-2A thrd.


MISC:
SAME AS 38751, DWG #1-6605 EXCEPT HUB THREADS ARE V TYPE.


MISC:
SAME AS 22640 & 49861 EXCEPT MATERIAL CHANGE AND WITH EXPELLER VANES.

NOTES:
SELLING PRICE FOR G30 PARTS IS US$41/POUND


MISC:
FORRO,TAPADERA PLATO, F6018MP55  / GLAND, PLATE LINERD109S50; (OEM PRICE HEMMEN). Quote to Oscar $905.60, 09/15; OEM $1602, DISTRIBUTOR $1121, 2009


MISC:
NOTE: MUST MODIFY DWG #4144-C02 FOR HEAVY CUT WATER


MISC:
COMES IN BOX OF 2 FROM FACTORY      RFQ51410


DESCRIPTION:
43CM PUMP, BARE SHAFT, ALL METAL WET END

NOTES:
JACKY PRICE INCLUDES PUMP BASE, COMPANION FLANGES & CV MOUNT ACCESSORIES.


MISC:
NOTE: USE SEAL #U55124S01 AND CUT TO SIZE. SEE JOHN FOR DIMENSIONS.


NOTES:
NOTE: BUY C21 MATERIAL SLEEVE AND HAVE CERAMIC COATED AT MESA.


DESCRIPTION:
STUFFING BOX, DUCTILE IRON #7 200MP60-7*


MISC:
SIZE = 19 X 19 X 455 EACH PACKING RING. 4/SET.


DESCRIPTION:
RUBBER LINED IMPELLER COMPLETE WITH COMPANION FLANGES AND GASKETS


DESCRIPTION:
150EL PUMP, BARE SHAFT C/ WITH IA05 WET END


DESCRIPTION:
IMPELLER, FILLED VANES QUENCH FOR 700BRN


MISC:
272 m3/h @ 91m TDH 1450 RPM WITH 67% EFF.


MISC:
RESISTANT TO ABRASSIN, VULCANIZED NATURAL RUBBER 55F, NO MOTOR, NO TRANSMISSION

DESCRIPTION:
PUMP, BARE SHAFT C/W TEFC 15HP MTR 254T 1765


MISC:
NOTE: MAKE FROM U55060S01 JOINT RING BY CUTTING AND MAKING SMALLER.


DESCRIPTION:
65QVMR PUMP, BARE SHAFT IA05IMP/IR26LINER


NOTES:
QUOTED PRICE FOR 90" SHAFT OF $907.50 NET


NOTES:
MOTOR #Y-6/440V/60HZ/45KW COMPLETE WITH CV MOUNT


MISC:
NOTE: IMPURITY A33 MATERIAL IS THE SAME AS A51


DESCRIPTION:
VOLUTE LINER FRONT & HALF , 90 DURO URETHANE #3


DESCRIPTION:
LINER REAR & VOLUTE HALF, 90 DURO URETHANE #4


MISC:
USE WITH 200ZJIA60, 200ZJIA65, 150ZJIA65, 200ZJIA70


DESCRIPTION:
SHAFT ASSY, C/WITH NUTS-WASHERS 40CR 60391937


DESCRIPTION:
SHAFT ASSY, C/WITH NUTS-WASHERS 40CR, 60366848


MISC:
M24X180MM STUD M24 NUT M24 WASHER: COARSE THREAD, MILD STEEL


MISC:
HARD SURFACED WITH PLEXUS BORIDE CARBIDE ALLOY


MISC:
BOART SLINGER MS 502974, PHTSA#52-2; shaft DIA 1-1/2 IN; DEFLECTOR LADO ESTOPERO


MISC:
SAME AS DENVER EXCEPT HUB THREADS ARE 2-1/2" - 4 THDS/IN ACME RH.

NOTES:
KAN WEE PRODUCES ONLY A05 MATERIAL, FOR RUBBER IMPELLER ORDER FROM JACKY


MISC:
ANNIN PLUG TYPE MODEL 1660 CONTROL VALVE


DESCRIPTION:
BEARING, COLUMN 21153 / COLUMNA,BALINERA


MISC:
ALTERNATE CAST MATERIAL HK40, LURGI DWG #D70142001L00001


DESCRIPTION:
PLUNGER, 6.25" HVY REBUILT  - P/N 16-212-008


DESCRIPTION:
WASHER-THRUST FOR RIGHT HAND HOUSING ASS., #109942 HGM


DESCRIPTION:
HOUSING SEC. GEAR STD.. P/N21000A, EIMCO P/N SA-UN-11566-


MISC:
IMPELLER  /SAME AS ALLIS CHALMERS #98-330-286-508, PHTSA#5037


MISC:
SHAFT, ASSEMBLY, 503008 / VENDOR ID 10027295

NOTES:
INTMPE $2793.10, 04/15. 1. "shaft assy 12101008 we can easily have Grosvin make a drawing and produce it at much lower cost, no tooling required."John 8/18


MISC:
IMPULSOR HULE RBR MS27001 ,504828 / SAME AS ALLIS CHALMERS #98-039-047-501. TO OSCAR $791.00. TO NYRSTAR $895.00. SOLD$530,03/13; PHTSA#542

NOTES:
SOLD $560.00 (Jan 2018). "12102004 do not offer this item. There is no way to make profit on it even if we produce it ourselves. Tooling cost would be more than $8,000.00 and volume is minimal." John 08/18


DESCRIPTION:
SLINGER, INBOARD  /  SLINGER, INTERNO  503279


MISC:
Pump: aluminum diaphragm, BUNA NRV Ball: Neoprene   ( 3" port inlet and discharge, 21.6" suction lift dry, 105 PSI/7 bar, 1/2" air inlet

DESCRIPTION:
3" Air operated double diaphragm pump (243 gpm)


DESCRIPTION:
SURGE CHAMBERS  WITH SEATS/BALLS, SP16003


MISC:
IMPELLER FOR THIS SHAFT IS 19.375" DIA. SHAFT, 600#

NOTES:
OLD PART NUMBER 41477, Sell $738 (10/16)


DESCRIPTION:
TAPADERA /COVER, RADIAL BEARING I.E. 38245


MISC:
AN-17 HARDWARE ITEM. Customer can buy in any local bearing house


DESCRIPTION:
IMPELLER, 22" DIA DIA RH #046515G01G1228


NOTES:
SAME DRAWING AS STOCK NUMBERS 610875, 610835 EXCEPT DIAMETER


MISC:
ACME 3/4" PITCH SINGLE LEAD THREAD RH X 5.25" DIA.

DESCRIPTION:
IMPELLER, 39" DIA. X 6" THK X 16" EYE 4 VANES


DESCRIPTION:
THRUST BEARING BRACKET FOR LR HORIZ. SPLIT CASE(NO BEARINGS)


DESCRIPTION:
IMPELLER, 20" DIA,M 400BHN 5V W/RING - P/N 314995


DESCRIPTION:
IMPELLER, 20" DIA 400BHN 8V W/RINGS - P/N 312727


DESCRIPTION:
IMPELLER, 19-1/2" DIA 430BHN 8V W/RINGS - P/N 312727


DESCRIPTION:
IMPELLER, 21-1/2" DIA 400BHN 8V W/RINGS - P/N 312727


DESCRIPTION:
SEAL CAGE SPLIT LANTERN RING  - P/N 312901


MISC:
FOR DIRECT DRIVE MOTOR MOUNT WITH COUPLING (FOR ACID SERVICE 316L PRICE IS $6300 COST, SELL=$10,712)

DESCRIPTION:
PUMP, BARE SHAFT C/WITH ACCESS. + CPLNG  - P/N 80MPVLHP36

NOTES:
SOLD 2 PUMPS TO WINDALCO JAMAICA 6/08 $6882.50


DESCRIPTION:
SLEEVE & BEARING ASSY., UPPER  - P/N 80MPV80-2


DESCRIPTION:
HOUSING, BRACKET & CAP, BEARNG  - P/N 410465


DESCRIPTION:
SHAFT, 10X12DSH STD ALL SEALS 3.50" DIA.


NOTES:
DRAWING REQUIRED TO SUPPLY (QUOTE: 511042-113990)


NOTES:
DRAWING REQUIRED TO PRODUCE, ESTIMATED P.T.A.D. IS 1W


MISC:
SAME AS 610824 EXCEPT FOR ADDED LABYSEAL

DESCRIPTION:
HOUSING, BRACKET & CAP, BEARNG C/W LABYSEAL - P/N G-4316

NOTES:
EST. PROD.TIME IS 8-10 WKS. FIRST ORDER. (37031 QTY. 11) **PRICE SOLD TO WINDALCO $1422.00(INT.37014-12964 QTY.1)


MISC:
SEE 504830 FOR THE SAME PRICES, PHTSA#5041-A   GLANDULA,REVESTIMIENTO HULE LINER, 504826


DESCRIPTION:
OPEN IMPELLER W/RINGS, PATTERN 68211, DIA:25"X23.03"


DESCRIPTION:
IMPELLER, 15" DIA 400BHN 3V C/W W/RING - P/N 319181A


DESCRIPTION:
NUT, UPPER BRNG ASSY. LOCK  - P/N 80MPV80-10


DESCRIPTION:
NUT, LOWER BRNG ASSY. LOCK  - P/N 80MPV80-4


DESCRIPTION:
IMPELLER, 19-3/4" DIA. 400BHN 5V W/RING - P/N 314995


DESCRIPTION:
IMPELLER, 21" DIA., 400BHN 5V W/RING - P/N 314995


DESCRIPTION:
IMPELLER, 19" DIA., 400BHN 5V W/RING - P/N 314995


DESCRIPTION:
RING, WEAR CASING STAGE #1  - P/N A-32658


DESCRIPTION:
HEAD, IMPELLER ITEM #6  - P/N PD2-3.68KGM2


DESCRIPTION:
IMPELLER, 23-1/2" DIA W/O BACK VANES - P/N E00127E012-1228


DESCRIPTION:
BOWL ASSY. C/W STRAINER, DEEP WELL - P/N 14JKH 11stage


DESCRIPTION:
IMPELLER, 26 1/2" DIA., 400BHN 5V W/RING - P/N 341995


MISC:
DESIGNED FOR CHESTERTON CS-269428 CARTRIDGE SEAL & NM06500R109800 SPIRAL TRAC


NOTES:
Pricing as per Johns quote(511036-113107) on Jan23/11


DESCRIPTION:
BOWL, BOTTOM #16 (W/GLASS ENAMEL) - P/N 9C610-159


DESCRIPTION:
BEARING, BOWL MIDDLE  #12 - P/N 10RJC-608


DESCRIPTION:
ADJUSTING NUT  (ITEM #3) - P/N 8MPVTP-006/36


DESCRIPTION:
MOTOR YLB200-2-4 (ITEM #5)  - P/N 37KW/4P


DESCRIPTION:
STUFFER PACKING CAP  (ITEM# 8) - P/N 6MPVTP-36


DESCRIPTION:
STUFFER PACKING BOX  (ITEM #9) - P/N 6MPVTP-32


DESCRIPTION:
MOTOR SHAFT  (ITEM #16) - P/N 10MPVTP-001A


DESCRIPTION:
SHORT PIPE  (ITEM #18) - P/N 10MPVTP-500/194F


DESCRIPTION:
IMPELLER, 17" DIA. 3V 400BHN - P/N 411744


DESCRIPTION:
DISCHARGE PIPE  (ITEM #22) - P/N 10MPVTP-400/194F


DESCRIPTION:
BOWL, UPPER  (ITEM #24) - P/N 10MPVTP-607A


DESCRIPTION:
BEARING  UPPER  (ITEM #25) - P/N 10MPVTP-604/36


DESCRIPTION:
SHAFT, IMPELLER  ITEM #26 - P/N 10MPVTP-603/36A


DESCRIPTION:
BOWL, MIDDLE  (ITEM #27) - P/N 10MPVTP-607


DESCRIPTION:
WEAR RING  (ITEM #31) - P/N 250MPVTP130-605


DESCRIPTION:
BEARING BOTTOM  (ITEM #32) - P/N 10MPVTP-611/36


DESCRIPTION:
BOWL BOTTOM  (ITEM #33) - P/N  10MPVTP-610


DESCRIPTION:
STAINER  (ITEM #34) - P/N 8MPVTP-700/6NPT


MISC:
SEAMLESS 0.06-0.13% CARBON, 0.025% PHOSPHORUS MAX, 0.006% SULPHUR MAX. 1.505 MAX O.D.

DESCRIPTION:
TUBE, 1.5" o.d. X 23' long x 2.77 min.wall.thkns. seamless A-214-5-8T

NOTES:
FREIGHT PER TUBE TO KINGSTON AS OF 5/9/2012 = $7.60 EACH


DESCRIPTION:
TUBE, 1.5" o.d. X 21' long x 2.77 min.wall.thkns. seamless A-214-5-8T


DESCRIPTION:
TUBE, 1.5 X 1.65mm X 30' DPLX SS GRADE 2304


MISC:
IMPELLER END OF SHAFT DRILLED AND TAPPED FOR M24 STUD.


MISC:
MODIFIED TO SUIT 80MPLHPA42M PUMP IN OPERATION AT ESSO COLD LAKE ALBERTA


MISC:
8 inches high by 20 inch diameter      510 mm


MISC:
JOINT RING DISCHARGE; E4132LS01 /  $24, 10/14


MISC:
ASSEMBLY FOR SHAFT(503532) & SLEEVE(503539)


MISC:
SAME AS MK #21196-00-500,  P/N 39042 ACME THREAD


MISC:
BEARING, TPR ROLLER #90268 100X60" #2 DR. 22141  / 477 TIMKEN CONE. 90268 IS ASSY NUMBER. / NYSTAR 1024835

DESCRIPTION:
BEARING, TPR ROLLER / RODO,BALINERA,CONJUNTO


MISC:
B027M = HX HD  SET SCREW 10mm X 25mm Long


MISC:
SIZE: 12X70MM STUD WITH NUTS.  (FROTH PUMP)


MISC:
GLANDULA, LADIAL FORRADA SUCCION  504830

NOTES:
IGL$549(5/17). TT-INVENTORY QTY3- REDUCED TO SELL $410.00.


DESCRIPTION:
THROAT BUSH F6083R26  /   CASQUILLO,ANGOSTURA,CROMADA, F6083R26


DESCRIPTION:
LINER, COVER PLATE DAHF3017R55  1-37-05-01559


DESCRIPTION:
IMPELLER, 18-1/2" DIA 3V 400BHN W/RING - P/N 314992


DESCRIPTION:
SEAL CAGE SPLIT LANTERN RING  - P/N 314084


DESCRIPTION:
BOWL, MIDDLE  (ITEM #33) - P/N 300MPVTP220-607


DESCRIPTION:
BEARING, DOWN (ITEM #38)  - P/N 300MPVTP-611


DESCRIPTION:
VALVE, RELIEF SET 100PSI  - P/N J4-J035-DR


DESCRIPTION:
SHAFT, IMPELLER (ITEM #32)  - P/N 300MPVTP220-603


DESCRIPTION:
BALL VALVE,  (13CR, WRENCH THREAD)  1/2"


DESCRIPTION:
BALL VALVE,  (13CR, WRENCH THREAD)  3/4"


DESCRIPTION:
SLEEVE, CENTRE SHAFT 420-500Bhn - P/N A-31106


DESCRIPTION:
HOUSING, BRACKET & CAP, BEARING - P/N G4316


NOTES:
DRAWING MUST BE MADE TO FILL AN ORDER!!!!!!!


NOTES:
NOTE: A DRAWING IS REQUIRED TO COMPLETE AN ORDER.


NOTES:
NOTE: DRAWING IS REQUIRED TO FILL ORDER.


DESCRIPTION:
IMPELLER, 25" DIA., 400BHN 5V W/RING - P/N 314995


DESCRIPTION:
IMPELLER, 21-5/8" DIA 5V 400BHN W/RING - P/N 314995

NOTES:
26" DIA. MAX. IMPELLER TO BE STATIC BALANCED ****sold by corrosion products @ $1975.00????******


DESCRIPTION:
IMPELLER, 23 " DIA., 400BHN 5V W/RING - P/N 314995


DESCRIPTION:
IMPELLER, 22" DIA 5V 400BHN  W/RING - P/N 314995


DESCRIPTION:
COUPLING, MOTOR SHAFT  - P/N 80MPVE80-21


DESCRIPTION:
BOWL ASSY. & DISCHARGE HEAD, 6 STAGE 622013 - P/N 300MPVTP160-1

NOTES:
COST PRICE INCLUDES DISCHARGE HEAD, PUMP COMPLETE


DESCRIPTION:
BOWL ASSY. ONLY, 6 STAGE  - P/N 300MPVTP160-1


DESCRIPTION:
IMPELLER, 26" DIA., 400BHN 5V W/RING -  P/N 314995


DESCRIPTION:
IMPELLER, 9" DIA W/RING-BEVEL - P/N 262146


DESCRIPTION:
IMPELLER, 9-1/4" DIA 400BHN W/RING-BEVEL - P/N 262146


DESCRIPTION:
IMPELLER, 9-1/2" DIA 400BHN W/RING-BEVEL - P/N 262146


DESCRIPTION:
IMPELLER, 9-3/4" DIA 400BHN W/RING-BEVEL - P/N 262146


DESCRIPTION:
IMPELLER, 10-3/8" DIA W/RING-BEVEL - P/N 262146


DESCRIPTION:
IMPELLER, 10-3/4" DIA W/RING-BEVEL - P/N 262146


DESCRIPTION:
IMPELLER, 11-3/4" DIA W/RING-BEVEL - P/N 262146


DESCRIPTION:
CASING, WITH STFNG BOX, MODIFIED, 10X12S - P/N 412214-5


DESCRIPTION:
IMPELLER, 21" DIA 400BHN 8V W/RINGS - P/N 312727


DESCRIPTION:
SLEEVE, SHAFT MS SPCL DUTY / CAMISA,EJE MS


DESCRIPTION:
COVER, RADIAL BRNG O.B. 400BHN - P/N G-6190


DESCRIPTION:
COVER, CASING SPLIT REMOVABLE  - P/N 412481


DESCRIPTION:
RING, CASING - P/N SK2138-AJ - P/N 213719


DESCRIPTION:
IMPELLER, 22-3/8" DIA 400BHN 8V W/RINGS - P/N 312727


DESCRIPTION:
IMPELLER, 8-1/2" DIA W/RING - P/N G-6401R


DESCRIPTION:
IMPELLER, 21-1/2" DIA. 400Bhn  3V W/RING - P/N 314992


DESCRIPTION:
IMPELLER, 9-1/2" DIA 400BHN W/RING - P/N G-6401R


DESCRIPTION:
BUSHING, RUBBER , BS-2-3/16 (60 DUROMETER)


NOTES:
QUOTED PRICE IS FOR A COMPLETE GLAND SET( 2 HALFS), Sold $590(qty1) 8/18


MISC:
SEE DWG 2065-C2 FOR MATERIAL & TECHNICAL DETAILS


DESCRIPTION:
PLATE, SINGLE SCREEN CENTER,  GRADE 6020/85

NOTES:
Competition SET-PANEL,MOD, Central 1 OF 20 (FULL SET) $380 EA X 20=$7600


NOTES:
Competition Part # C16.1X50.1TN19081219FD30 (Set 5 Each $2100/ea)


MISC:
GOULDS 400 HP, Curve# 18BHC, PUMP, GOULDS(TURBINE ONLY)VIT-FF 3 STAGE SER:485999-1-2Y3 MOD.14X18BHC

NOTES:
Min 3 Max 6  12 month usage (0     ****** 70% increase on the cost for next orders 27th March 2019 ML*****


NOTES:
Min 1 Max 2  12 month usage SIC$3154.73(QTY2-12/17)


DESCRIPTION:
IMPELLER, 9-3/4" DIA 400BHN W/RING  - P/N G-6401R


DESCRIPTION:
IMPELLER, 10-3/8" DIA W/RING - P/N G-6401R


DESCRIPTION:
SCREW, IMPELLER NUT LOCKING - P/N G-6402A


DESCRIPTION:
HOUSING, BRACKET & CAP, BEARING - P/N 311019


DESCRIPTION:
HOUSING, BRACKET & CAP, BEARING  -  P/N 312390


DESCRIPTION:
SLEEVE, SHAFT STD LNGTH 10-1/8" - P/N 312543


DESCRIPTION:
IMPELLER, 13-1/2" DIA  W/RINGS - P/N 313670


DESCRIPTION:
IMPELLER, 14-5/8" DIA W/RING - P/N 313670


DESCRIPTION:
IMPELLER, 8-3/4" DIA. 1ST STAGE CCW - P/N G-7457


DESCRIPTION:
BOLT & NUT, GLAND SWING 1/2" - P/N 310340


DESCRIPTION:
SLEEVE, SHAFT STD LENGTH 6" - P/N 312129


DESCRIPTION:
IMPELLER, 12-1/2" DIA 400BHN 3V C/W BVL RNG - P/N 319181A


DESCRIPTION:
IMPELLER, 16" DIA 400BHN 3V - P/N 319181A


DESCRIPTION:
NUT, ADJUSTING  (ITEM #3) - P/N 14MPVTP-006/30


DESCRIPTION:
HEAD, DISCHARGE (ITEM #6) - P/N 6MPVTP-104/32


DESCRIPTION:
GLAND, PACKING  (ITEM #7) - P/N 6MPVTP-109/32


DESCRIPTION:
BOX, STUFFING  (ITEM #8) - P/N 6MPVTP-103/32


DESCRIPTION:
MOTOR SHAFT  (ITEM #15) - P/N 10MPVTP-001/30.1


DESCRIPTION:
COUPLING (CONNECT MOTOR SHAFT) (ITEM#16) - P/N 6MPVTP-110/32


DESCRIPTION:
SHORT PIPE, IN/OUT ENAMELED  (ITEM #17) - P/N 12MPVTP-500/194*2F


DESCRIPTION:
SPIDER BEARING (ITEM#18) - P/N 6MPVTP-112/32 40"


DESCRIPTION:
COUPLING, 40D  (ITEM #21) - P/N 6MPVTP-117/32


DESCRIPTION:
DISCHARGE PIPE,  194*1000 (ITEM #22) - P/N 6MPVTP-118/32


DESCRIPTION:
DISCHARGE PIPE, 194*2500  (ITEM #24) - P/N 6MPVTP-120/32


DESCRIPTION:
GASKET, 16D  (ITEM #27) - P/N 6MPVTP-121/32


DESCRIPTION:
DISCHARGE PIPE,  (ITEM #29) - 12MPVTP*400/194*2F


DESCRIPTION:
BOWL, TOP DISCH.  (ITEM #30) - P/N 300MPVTP-607E


DESCRIPTION:
BEARING, UPPER (ITEM #31) - P/N 300MPVTP-604


DESCRIPTION:
BEARING, BOWL  (ITEM #34) - P/N 300MPVTP-608


DESCRIPTION:
CONE SLEEVE  (ITEM #35)  - P/N 300MPVTP-609


DESCRIPTION:
RING, WEAR (INNER HOLE) (ITEM #37)  - P/N 300MPVTP220-605


DESCRIPTION:
BOWL, BOTTOM  (ITEM #39) - P/N 300MPVTP-610


DESCRIPTION:
BOWL ASSY. W/SS IMPELLER - P/N 100MPVTP15


DESCRIPTION:
BUSHING, INTERSTAGE DIAHPRAGM  - P/N 311343


DESCRIPTION:
INTERSTAGE DISPHRAGM BUSHING  - P/N 311342


DESCRIPTION:
SHAFT / EJE CALIBRADO,ACERO INOXIDABLE C1045


NOTES:
MIN 6, MAX 12, 1 YR Use 2, EBS$145 (QTY4-12/17). NOTHING PURCHASED SINCE JAN 2017


DESCRIPTION:
TUBE, 1.5" X 1.65mm X 23' LONG GRADE 2304 SS


DESCRIPTION:
TUBE, 1.5" o.d. X 30' long x 2.77 min.wall.thkns. seamless A-214-5-8T


DESCRIPTION:
IMPELLER, 22-1/2" DIA 400BHN 8V W/RINGS - P/N 312727


DESCRIPTION:
IMPELLER, 20-1/2" DIA., 400BHN W/RING - P/N 213717B


DESCRIPTION:
BEARING, ROLLER THRUST W/DRIVE SHAFT EXT.


DESCRIPTION:
GEARBOX SUMITOMO  - P/N EHYJ-B4110-Y-Y3-74


DESCRIPTION:
SCREW, 9" DIA X 4'-10' LONG SCREW W/3/16"


DESCRIPTION:
BOLT & NUT, GLAND SWING TYPE  - P/N G-1254


DESCRIPTION:
IMPELLER, 14-1/4" DIA 3V W/RING  - P/N G-6831


DESCRIPTION:
IMPELLER, 15-1/4" DIA 3V W/RING  - P/N G-6831


DESCRIPTION:
IMPELLER, 16" DIA 3V W/RING  - P/N G-6831


DESCRIPTION:
IMPELLER, 16-1/2" DIA 3V W/RINGS - P/N G-6831


MISC:
MAKE SLEEVE DWG FROM SHAFT AND GLAND RING DRAWINGS


DESCRIPTION:
IMPELLER, 16-1/2" DIA., 400Bhn 3V W/RINGS  - P/N 314992


DESCRIPTION:
IMPELLER, 18" DIA., 400Bhn 3V W/RINGS  - P/N 314992


DESCRIPTION:
IMPELLER, 20" DIA., 400Bhn 3V W/RING - P/N 314992


DESCRIPTION:
IMPELLER, 23" DIA., 400Bhn 3V W/RING  - P/N 314992


DESCRIPTION:
IMPELLER, 19-1/2" DIA 400BHN 3V W/RINGS - 314992


DESCRIPTION:
TRANSITION PIECE, BOWL ASSY. TO CUSTOMER COLUMN - P/N 100MPVTP15


DESCRIPTION:
IMPELLER, 18" DIA 400BHN 8V W/ RINGS - P/N 312727


DESCRIPTION:
IMPELLER, 18-3/8" DIA 400BHN 8V W/RINGS - P/N 312727


DESCRIPTION:
IMPELLER, 18-3/4" DIA 400BHN 8V W/RINGS - P/N 312727


DESCRIPTION:
COLLAPSING TOOL, ROUND SHANK, ROUND COLLAR


DESCRIPTION:
VALVE DISC LP VALVES ONLY  P/N 1002-2255-00


DESCRIPTION:
NIPPLE, COLUMN 10"D.X59-3/4"LG., ORDER ON REQUEST BY END USER 11/08


DESCRIPTION:
NUT, 13NC -2 BRASS  1-15/16"  HW100912839  U/W-JOHNSTONE PUMP 250HP  1745254-SULZER


DESCRIPTION:
RING, LANTERN TURBINE PUMP 250HP MODEL TB-27382-83


DESCRIPTION:
GLAND,  PACKING  SPLIT  #2619-1  U/W-JOHNSTONE  VERTICAL PUMP  250HP.  SER: JY17452-54


DESCRIPTION:
PACKING SETS, FLUID END  - P/N GAS-102854-000


DESCRIPTION:
COUPLING, SHAFT 100' DIA. - P/N D26444/8A


DESCRIPTION:
PUMP, BARE SHAFT VERTICAL 500gpm @ 40' @ 900rpm

NOTES:
REPLACES HAZELTON VNR 3-11 PUMP LENGTH 1298MM


MISC:
MODIFIED FOR INPRO SEAL #VBXXD-HH 65mm x 110mm MATERIAL 660BB


MISC:
STEEL PUG AND SPECIAL LUBRICANT Lomu + 410SS TRIM PTFE/VITON (FLOW SERVE LUBE

DESCRIPTION:
PLUGCOCK, 6" ANSI 125#FLNG FLT FACE, 733C FS LUBE


MISC:
VALVE IS A216WCB BODY WITH STEEL PUG AND SPECIAL LUBRICANT Lomu + 410SS TRIM PTFE/VITON


MISC:
VALVE IS STEEL PUG AND SPECIAL LUBRICANT Lomu + 410SS TRIM PTFE/VITON


MISC:
STUD IS M30 X 125MM LONG, BOLT, ADJUSTING 3NUT 2 WASHER D066ME62


MISC:
INCLUDES  1 AGITATOR _2 STABILIZERS 038MP-H01A

NOTES:
Quote from SINOMIN (TOTAL MOULD PRICE $10,000)


MISC:
FLOTATION MIXER (2 stabilizer segment  + 1 agitator). Metal Skeleton(Q235) covered R55

NOTES:
mould 65 days, parts 10 days; price $836.67 is for a complete stabilizer (2 SEGMENTS)


MISC:
FLOTATION MIXER (2 stabilizer segments + 1 agitator) Material Q235 covered with R55r @ 75 Shore A hardness.

NOTES:
mould 65 days, parts 10 days. P.O. Order6


MISC:
PLUG, PIPE ITEM 747 INSTALLED IN SUCTION BOWL BOTTOM


MISC:
BAUXITE GRINDING MILLS 7 X 84 TYPE 1150T20


MISC:
VALVE IS CAST IRON PUG AND SPECIAL LUBRICANT Lomu + 410SS TRIM PTFE/VITON


DESCRIPTION:
SEAL, INPRO THRUST END  P/N 657-8751P-61


DESCRIPTION:
COLLAR, SPLIT, THRUST  P/N 663-0465B-00-OP40C


DESCRIPTION:
RING, SPRING RETAINER  P/N 66-7703P-03-00*


DESCRIPTION:
FLINGER, INT. LABYRINTH  P/N 655-2785C-00-04TEP


DESCRIPTION:
SEAL, SHAFT, FLANGE DBL. ROTOR (DRIVE END)


DESCRIPTION:
SEAL, SHAFT, FLANGE DBL. ROTOR (WET END)


DESCRIPTION:
VALVE, PLUG TYPE 300# C/WITH GEAR OPERATOR


MISC:
PTFE SLEEVED, FLUOROSEAL # PIECCE 152F WCB/316 ALCAN PROTECT V413 C/W DTF-468 GEAR

DESCRIPTION:
VALVE, 3" PLUG CIV GEAR OPERATOR W/HANDLE ASTM A216 150#


DESCRIPTION:
COUPLING, DRIVE HALF, FLEX TYPE DWG. G-3976


MISC:
NEW #48726 INVESTMENT CAST, OLD 39932 IN 317L MATERIAL


DESCRIPTION:
PUMP, 250 HP @ 344 ft H(m), 2518 GPM, 20 FT NPSHr


MISC:
(ORIGINAL. MADE CHANGES TO 318MM Jan'18).


MISC:
Bearing, bowl intermediate is the same as bearing, bowl discharge. NTRN/GFT/PTFE changed to Leaded Bronze

DESCRIPTION:
BEARING, BOWL INTMD & DICHRG ASTM B140 LDDBRNZ

NOTES:
Grosvin confirmed all bowl bearings are the same for this pump.


DESCRIPTION:
SPIDER & BEARING  - NOT USED IN THIS PUMP


DESCRIPTION:
2" POLY VALVE DOUBLE DIAPHRAGM MINING PUMP - AFVMP50/PPPPP/HYT/HY/HY

NOTES:
AFVMP50/PPPPP/HYT/HY/HY - Model/Wetted Parts & Outer Pistons / Air Chambers / Center section / Air Valve / Diaphragms / Valve Balls / Valve Seats


DESCRIPTION:
MOTOR, 500HP 875RPM 117AMP 2300VOLTS (MILL 5)


MISC:
Quoted 511492, new motor chosen.  FRAMES 8211S, TESV. Type KAF

DESCRIPTION:
MOTOR, INDUCTION 500 HP 883 RPM 2300 VOLTS  GE MOTOR (RECONDITIONED)


MISC:
EL MCHT-FORRO SUCCION LADIAL BOMBA (translation).  SAME AS A/C 98-231-071-5


DESCRIPTION:
BEARING, BOWL INTMD & DICHRG ASTM B140 LDDBRZ


MISC:
BEARING LOCK WASHER #W-11 WASHER, PRECISION


DESCRIPTION:
CASING, W/PKG BOX 430BHN  - P/N 510342/7


DESCRIPTION:
PUMP, BARE SHAFT C/W CV MOUNT-BASE-GUARD


DESCRIPTION:
VALVE, BUTTERFLY DUPLEX 20MESH MONEL BSKT


DESCRIPTION:
PUMP SET, 1.3SG/Sludge, 165m3/h @ 63m 1450rpm 75KW

NOTES:
MOTOR #Y280S-4 SIZE 75KW 380V/50 CYCLE 1450RPM


DESCRIPTION:
PUMP SET, 70 m3/h @ 59m Motor 380v/50hz 1450rpm


MISC:
BEARING CONE SPACER, X45447 / Old#3397909120 /NYSTAR 1024844


MISC:
FOR 1-15/16" SHAFT PER BM-102-2 SIMILAR TO DRAWING 9184-J1/R1


NOTES:
PTFE SLEEVED, FLUOROSEAL #PIECE 152F WCB/316 ALCAN PROJECT V413 C/W DTF-468 GEAR OPERATOR WITH HANDLE ASTM A216, CLASS 150 CAST STEEL PLUG AND BODY. MARKING IN ENGLISH TO SHOW ON & OFF


DESCRIPTION:
NUT, LOCK / TUERCA,PRESION 524194-INTMPE


MISC:
IMPULSOR,BRONCE CONJUNTO / TUR-14DC-COL-STD ANSI/ASTM B148, ALLOY C95300, 10 7/8" TRIM WITH SEAL R


MISC:
BUSHING, THROATBUSH, RUBBER, F6083R26 / U/W-WARMAN PUMP 8X6-MDS7393


MISC:
to replace Outokumpu Tank Cell Agitator per their dwg DOC250615

NOTES:
Wet-end material is 316SS shaft and blade assembly.


MISC:
IMPULSOR, HULE URETANO /IMPELLER, 25396, 6-S-P URETHANE, / supplied #25349 natural rubber PHTSA#5440-P


MISC:
TO FIT ON SHAFT 1-15/16" DIAMETER 600009-H01/R3; old dwg#2066-C2,


MISC:
SCREEN, UPPER,  24007 -520 BLACK RUB / SCREEN, UPPER 2.5" -100 P/N 24007  PHTSA#5345-A


DESCRIPTION:
STUFFING BOX, BEARING 2.43X2.93X5.75.  IE4991109


MISC:
BALINERA,COLUMNA SIZE  1.93X2.93X600 MATERIAL TYPE B143-18


DESCRIPTION:
SCREW, GLAND ADJUSTING (CODE-2229 CAT #757)


DESCRIPTION:
TUBO, DESCHARGE / PIPE, DISCHARGE, #21877


DESCRIPTION:
TRASH PUMP KRS822L PERFORMANCE   30HP 4"


DESCRIPTION:
TRASH PUMP LH311W60 PERFORMANCE  15HP 4"


DESCRIPTION:
TRASH PUMP KTZ45.5-61 PERFORMANCE  7.5HP 4"


DESCRIPTION:
TRASH PUMP KTZ411-61 PERFORMANCE 15HP 4"


MISC:
STUD, FRAME PLATE ADPTR,M6Z3-35VC /SIZE 16mm x 35mm long with nut and flat washer.


MISC:
STUD, FRAME M12Z3-50VC/ GRADE 5 STEEL STUD 10MM X 50MM LONG WITH FLAT WASHER & NUT


MISC:
PORT ESQUIVEL CAUSTIC TANK CAR LOADING PUMP. MOTOR IS 415V 50HZ TEFC

NOTES:
TERMS: 50% ADV AND 30% ATS CHINA, BALANCE NET 30 DAYS. DELIVERY IS 5 WEEKS. NOTE: PRICE INCLUDES 20HP IP56 ENCLOSURE SEVERE DUTY IEEE 841 MOTOR.


DESCRIPTION:
PIPE, DISCHARGE D3SAA5026 / TUBO,DESCARGA


MISC:
CIV GEAR OPERATED PTFE SLEEVED, FLUOROSEAL #PIECE 152 F PROJECT V413 C/W DTF-468 GEAR OPERATOR + HANDLE

DESCRIPTION:
VALVE, STEEL PLUG  150# C/W GEAR OPERATOR


MISC:
RESISTANT TO ABRASSIN, VULCANIZED NATURAL RUBBER 55F

DESCRIPTION:
PUMP, BARE SHAFT C/W TEFC 15HP MTR 254T 1765RPM


DESCRIPTION:
PUMP, BARE SHAFT C/W TEFC 25HP MTR 284T 1775RPM


MISC:
HEAT PROOF, WATER PROOF, CORROSION PROOF


MISC:
1750RPM, Shaft power of pump at rated point: 269HP, 70% EFF 20'NPSHR


NOTES:
Gate Valve Specifications
VALVE TYPE: GATE VALVE
NOMINAL SIZE: NPS 2 R (DN 50 R)
PRESSURE RATING: CLASS 800 (PN 130)
END CONNECTION: THREADED
CONSTRUCTION: WEDGED, BOLTED BONNET
BODY AND/OR BONNET/COVER MATERIAL: A105
TRIM DESCRIPTION: 316/316/316
SEATINGSURFACE OF CLOSURE MEMBER
(DISC/GATE): 316
SEATING SURFACE OF BODY SEAT: 316
STEM: 316
CLOSURE MEMBER (DISC/GATE):
SEAT SEAL: METAL
OPERATION MODE: HANDWHEEL
REDUCED BORE, SOLID WEDGE, API 602 DESIGN,
F TO F=140MM.


MISC:
FM- DIST. DE AGUA / BOMBA 5 X 4 ( DGO ) / WATER SEAL MMP-01746 BBA


MISC:
FM- GLANDULA,FORRADA LADIAL / SAME AS A/C #98231070501


MISC:
SAME AS A/C #98-231-120-501 EXCEPT MATERIAL TYPE.  FM-FORRO LADO SUCCION P/BOM?


OTHER AM:
395.52 * 98-236-256-501?BOMBAS Y SUMINSTROS DEL NO


DESCRIPTION:
CASING, GLAND HALF STANDARD 98-431-797-501


NOTES:
MANGA BOMBA 8"X6"TIPO SRL-C ACERO D2 61RC 1045


MISC:
fm- COVER ASSY INB #98-331-936-801 BEARING

DESCRIPTION:
COVER, BEARING INBOARD 8X6 98-331-936-801


DESCRIPTION:
SCREEN, BASKET 225 U/W-SIMFLO PUMP SER:86937-2 MODEL:ST14C-7 250HP


MISC:
sleeve bearing; 1-15/16 I.D., 3" O.D., 4-1/2 LONG BEARING HARDNESS IS 65-75 SHORE A

DESCRIPTION:
SLEEVE BEARING 21319-6-705 / RODAMIENTO, HULE


DESCRIPTION:
BOX, PACKING 3957130 U/W-JOHNSTON PUMP 250HP


MISC:
IMPELLER COLLET / SEGURO IMPULSOR 1625-064  ; Material ASTM A36 - India

NOTES:
(15% QTY20). DrwG 600094-H01 drawn is for a Johnston 500HP, price I have is 81 USD for this part. (6/6/19)


MISC:
DENVER PART #503459 & 50184. OUTBOARD BRG. CAP


MISC:
SAME AS DENVER 504828.  FM- FORRO Lado SUCCION #2-174-5


MISC:
FM- FORRO MOTRIZ 3 X 3 SRL/ SAME AS DENVER


MISC:
SAME AS DENVER #504828  / FM-SG IMP NAT RUB CHECK 5X4-14 #98039047501


MISC:
SAME AS DENVER EXCEPT HUB THREADS ARE 2-1/2" - 4 THDS/IN ACME-2G  RH.

NOTES:
KAN WEE PRODUCES ONLY A05 MATERIAL, FOR RUBBER IMPELLER ORDER FROM PIPSA / IMPULSOR P/BOMBA SRL  8 X 6 X 18


MISC:
SAME AS DENVER #504503 / 98-231-071-501 / FM- FORRO SUCCION  3 X 3 SRL


MISC:
SAME AS DENVER#504874 / FORRO LADO ESTOPERO BOMBA SRL

DESCRIPTION:
LINER, GLAND SIDE 8X6 RUBBER 98-231-123-501


MISC:
SAME AS DENVER #504907 EXCEPT MATERIAL TYPE / FM- SU LINER NAT SFO 8X6-18 #98231120501

DESCRIPTION:
PLATE, SUCTION SIDE 8X6 RUBBER 98-231-120-501


MISC:
SAME AS DENVER #51826  (FORRO LADO ESTOPERO BOMBA SRL 8x10x21?)


OTHER AM:
$1022.15 SERVICIOS INDUSTRIALES MINEROS AP


DESCRIPTION:
IMPELLER, DRIVE END NATURAL RUBBER 45926


DESCRIPTION:
LOCK WASHER, BEARING OUTER BOARD 8910-0010


NOTES:
SELLO ACEITE #473239  OR GOULDS (3X3-10) Emili FMRFQ info


OTHER AM:
10.91   BOMBAS Y SUMINISTROS DEL NORTE SA D


MISC:
(42828?) SAME AS A/C#98-231-134-501 & DENVER #51825  EXCEPT MATERIAL / FORRO LADO SUCCION BOMBA


MISC:
F6015ME65 IS WRONG PART NUMBER. WARMAN CALLS THIS ITEM COVER PLATE BOLT WITH COST $110.70 IN 2000

OTHER AM:
630.60 PROVEEDORA DE SUPLEMENTOS Y SERVICI


MISC:
SIZE: 92MM X 85MM X 3.5MM THICK.  FM-O'RING DE FLECHA #E109S50 WARMAN 10x8


NOTES:
Terakhir:$460 ; Tyler $306; AoJin: $146.40 REVESTIMIENTO DEL PLATO DE LACUBIERTA  (Pump Size 6/4)


OTHER AM:
2,127.57 PROVEEDORA DE SUPLEMENTOS Y SERVICI


OTHER AM:
2181.00   PROVEEDORA DE SUPLEMENTOS Y SERVICIO


MISC:
FORRO L ESTOPERO WARM 8X6 SERIE A TIPO E


NOTES:
Tyler $820 06/16 IMPULSOR (6/4 Pump Size)


MISC:
TSSRBY50424B.  SEAL OIL GP1/DURCO3 GRUP1 #BY50424B-TSSR


MISC:
TSSRBY50424C,  SEAL OIL/DURCO3 GRUP2 #BY50424C-TSSR


MISC:
FOR PARTECH, SUPPLY IN 316L MATERIAL (98-236-104-001)/ FM-MANGA (GOULDS 5X4-14 SRL-C) #1-009-0

NOTES:
3.125" X 3.75" X 6.50" LONG, NEW A/C #SL-1601-316. HARD COATED #SL-1601-561, PRICE IS $578.00 FROM ADVANCED ENGINE.


MISC:
P/N 21814 / FM-PARRILLA INFER D3SRA5004 #21814


MISC:
FM-SELLO DE AGUA P/BOMBA 5 X 4  - 98-236-256-001


NOTES:
FOR FOB HOUSTON 40 FREIGHT, 30 CLEAN FEE, 40. PROFIT  / BRIDA SELLO MECANICO BBA GOULDS 1X2-10


OTHER AM:
$1168.20 SERVICIOS INDUSTRIALES MINEROS AP


NOTES:
NOTE: IMPELLER SAME AS DENVER #504978 EXCEPT HUB THREAD IS: 2-3/4" - 4 ACME -2G R.H.  / IMPULSOR P/BOMBA SRL 10 X 8"-


DESCRIPTION:
CASING, SUCTION SIDE STANDARD 5X4 503179


MISC:
FM- FORRO LADO ESTOPERO BOMBA SRL-C DE 8 X 6 / SAME AS A/C #98-231-123-501


MISC:
SAME AS A/C #98-231-120-501? EXCEPT MATERIAL TYPE

NOTES:
FORRO LADO ESTOPERO BOMBA SRL-C DE 8 X 6


MISC:
SAME AS A/C #98-231-120-501 EXCEPT MATERIAL TYPE / FM-FORRO LADO SUCCION BOMBA SRL-C DE 8 X 6


DESCRIPTION:
IMPELLER, METAL CHROME TALL 504886 NYRSTAR13


MISC:
MARK III GRP 2  1500 RPM  CAP100GPM       *** SAME # FITS MARK II MODEL 2X2R-10/100  & MARK II 2K2X1-10/73ARW ***


NOTES:
TERMS FOR PRICES FOB- ASIA PORT (not including tarrifs). Add Shipment, brokerage, tariffs costs.


MISC:
FM-BUSHING THROAT #98233732001 BBA GOULDS


MISC:
FM-PLATO SUCCION P/BOMBA 10X8.  98-231-135-501


MISC:
R196MKM13 / FM-KIT DE REPARACION 13" X LT 1 #R196-MK13Z


MISC:
CASING GASKETS - FM-COVER GASKET/DURCO3 GRUPO1 #Y22774EA-TM


MISC:
FM-FORRO LADO ESTOPERO / BOMBA 5 X 4  /  504826?


NOTES:
Jan23/11 / WINDOW, SIGHT #A01154A05 BBA GOULDS. $30 SUMMIT (2005)


NOTES:
FLECHA #122 GOULDS 3X4-10 FMRFQ#03052017  Emili


MISC:
SAME AS DENVER P/N#47815, 504978 & SALA #47815 EXCEPT THREADS ON HUB ARE 2-3/4" -4 ACME -2G R.H.


OTHER AM:
$1314 - Servicios Industriales Mineros AP


MISC:
FM-AIR VALVE SCREEN #08250007 WILDEN T15


MISC:
FM-ASIENTO DE VALVULA BOMBA WILDEN T-15  / INDIA- "Ball Seat"

DESCRIPTION:
VALVE, SEAT COVER WILDEN T-15 15-1120-51


MISC:
FM-ABRAZADERA CHICA BOMBA WILDEN T-15 #15-7100-08


MISC:
FM-DIAFRAGMA AIR SIDE #15-1010 WILDEN T-15


MISC:
FM-GASKET CENTER BLOCK #04-3529-52   india #04-3529-51  "AIR CHAMBER GASKET"


MISC:
FM- PARTE DE ABAJO#15-5080-01. TRANSLATED- BOTTOM PART#15-5080-01


MISC:
FM-TORNILLO#15-6130-08 BBA   /  INDIA-AIR COVER BOLTS 15-6130-03


MISC:
SEAL OIL 1K /DURCO3 GRUP1 #BY50424G-TSSR


MISC:
**** #45138 is the core for #45136 Dry gland housing liner, and is not sold as a part.

OTHER AM:
$1308- Servicios Industriales Mineros AP


OTHER AM:
$206.25 INGENIERIA BEJAR PARA LA MINIERIA


MISC:
SELLO MECANICO #C2CPX1375ECXVB BBA DURCO


OTHER AM:
$439.75 MATERIALES ELECTRICOS DE DURANGO


MISC:
Back cover for housing/ Engine side cover

DESCRIPTION:
CUERPO, D/SOPORTE #RD11741A011003 P/N - BODY/FRAME SUPPORT


MISC:
FM-DISTRIBUIDOR DE AGUA BBA GOULDS 8X6-18


MISC:
FM-IMPELLER, ASSY W/TEFLON O-RING 4x6-17


MISC:
LOCKNUT I.E BEARING #120-1 NASH #BB-0054


DESCRIPTION:
LINER, CASING DRIVE SIDE RM250-013-26001


MISC:
FM-FORRO L ESTOPERO 5X4-14 SRL-C #2-174-0


MISC:
FORRO Lado SUCCION  5X4-14 SRL-C #2-174-5


MISC:
TAPA LADO BOMBA PARA BOMBA 3x3 / TAPA LADO ESTOPERO PARA BOMBA 3x3


DESCRIPTION:
BUSHING, CROSSHEAD PIN AXG229 BBA DUPLEX


OTHER AM:
113.40 PROVEEDORA DE SUPLEMENTOS Y SERVICIOS


MISC:
FM-MANIFOUL DESCARGA #08-5020-01 WILDEN M-8


MISC:
FM-SG-IMPELLER NAT #98211426501 2x2x10 SRL


DESCRIPTION:
COVER, STUFFING BOX TAPERED WITH FLOW MODIFIERS


MISC:
FM-KIT DE REPARACION XLT12 117 #R196XLRKOZ

OTHER AM:
532.32 BOMBAS Y SUMINISTROS DEL NORTE SA D


OTHER AM:
2,187.44  BOMBAS Y SUMINISTROS DEL NORTE


MISC:
FM-MANGA PARA BOMBA 5" X 4"  TIPO SRL / 98-331-958-808?


MISC:
FM - MANGA BOMBA 6"X6"TIPO SRL ACERO D2 61RC - ?98-331-958-8208?


MISC:
316SS, 17-4PH SHAFT, RTFE SEAT, DOUBLE OFFSET HIGH PERFORMANCE ANSI CLASS VALVES GEAR OPERATED

NOTES:
TEST & INSPECTION: API 598, DESIGN & F-F STANDARD: API 609


DESCRIPTION:
BFV, 10" WFR, H202SRVC, A48,EPDM,316SS, GROP.


DESCRIPTION:
BFV, 12" WFR, H202SRVC, A48,EPDM,316SS, GROP.


DESCRIPTION:
BFV, 16" WFR, H202SRVC, A48,EPDM,316SS, GROP.


DESCRIPTION:
BFV, 8" WFR, H202SRVC, A48,EPDM,316SS, GROP.


DESCRIPTION:
BFV, 20" WFR, H202SRVC, A48,EPDM,316SS, GROP.


DESCRIPTION:
BFV, 24" WFR, H202SRVC, A48,EPDM,316SS, GROP.


DESCRIPTION:
BFV, 30" WFR, H202SRVC, A48,EPDM,316SS, GROP.


DESCRIPTION:
BFV, 36" WFR, H202SRVC, A48,EPDM,316SS, GROP.


DESCRIPTION:
BFV, 36" WFR, BRINE.SRVC, A48, EPDM, 316SS, GROP.


DESCRIPTION:
BFV, 18" WFR, GNRL.SRVC, A48, EPDM, 316SS, GROP.


DESCRIPTION:
BFV, 20" WFR, GNRL.SRVC, A48, EPDM, 316SS, GROP.


DESCRIPTION:
BFV, 24" WFR, GNRL.SRVC, A48, EPDM, 316SS, GROP.


DESCRIPTION:
BFV, 30" WFR, GNRL.SRVC, A48, EPDM, 316SS, GROP.


NOTES:
TO COVER IN TUNGSTEN CARBIDE .01" THICK ADD 400.00 TO PRICE- REPLICA CHARGE 275. 2 WEEK DELIVERY


NOTES:
$16.50/LB AVERAGE COST FOR ALLOY 20 FROM CHINA


MISC:
ALLOY 20 SS SHIP 2-3 WEEKS, CD4 MATERIAL 6-8WKS - SAME PRICE

DESCRIPTION:
COVER, REPELLER W COOLING WATER JACKET (WELDED)


MISC:
NOTE: FOR EFP-EXPORT ORDER, TRIM IMPELLER TO 7.3" DIAMETER; QUOTE $558.60 IN 09/05


MISC:
MARK III   1500 RPM  CAP100GPM       *** SAME # FITS MARK II MODEL 2X2R-10/100  & MARK II 2K2X1-10/73ARW ***


MISC:
MARK II  1500 RPM  TDH36MDH       *** SAME # FITS MARK III MODEL 2K3X2-82/72RV  &  MARK II 2K2X1-10/73ARW***


MISC:
MARK II  3000RPM TDH149FT, GPM60  *** SAME# FITS MARK II 2X2-10/100 & MARK III 2K3X2-82/42RV


NOTES:
CUSTOMER IS GABOT BIOCHEMICALS IN ISRAEL.


MISC:
CONSISTS OF 1 SHAFT (24) 1 NUT (6) 1 KEY (7)

DESCRIPTION:
SHAFT, ASSY C/WITH NUT, KEY 40CR #150MPD605-09

NOTES:
ROTATING COMPLETE ASSEMBLY IS DWG #2082-C2


DESCRIPTION:
SEAL, SHAFT SLEEVE Chr. CTD. #150MPD70-02 (21)


MISC:
ASTM A536 DI LUGGED BODY EPOXY COATED, HASTELOY DISC & STEM, VITON SEAT, ANSI CLASS EPOXY GEAR BOX VALVES

NOTES:
STU GETS 10% COMMISSION ON SALE OF THIS VALVE, JOHN.


DESCRIPTION:
CHECK, WAFER DULPLTWFR-WCB-ANSI 150# RTNLSS


DESCRIPTION:
CHECK, WAFER DULPLTWFR-WCB-ANSI 300# RTNLSS


MISC:
316SS, LUGGED, 17-4PH SHAFT, RTFE SEAT, DOUBLE OFFSET HIGH PERFORMANCE ANSI CLASS VALVES


MISC:
316SS, 17-4PH SHAFT, RTFE SEAT, DOUBLE OFFSET HIGH PERFORMANCE ANSI CLASS VALVES


MISC:
316SS, WAFER, 17-4PH SHAFT, RTFE SEAT, DOUBLE OFFSET HIGH PERFORMANCE ANSI CLASS VALVES GEAR OPERATED


MISC:
316SS, WAFER 17-4PH SHAFT, RTFE SEAT, DOUBLE OFFSET HIGH PERFORMANCE ANSI CLASS VALVES GEAR OPERATED


MISC:
316SS,17-4PH SHAFT, RTFE SEAT, DOUBLE OFFSET HIGH PERFORMANCE ANSI CLASS VALVES


MISC:
316SS, WAFER, 17-4PH SHAFT, RTFE SEAT, DOUBLE OFFSET HIGH PERFORMANCE ANSI CLASS VALVES


DESCRIPTION:
VALVE, BTRFLY 6" LG, VTNRS150#ANSI.EPXCGROP


DESCRIPTION:
VALVE, BTRFLY 8" LG, VTNRS150#ANSI.EPXCGROP


DESCRIPTION:
BUTTERFLY, LUG TYPE HP 26" 150# ANSI RTFE


DESCRIPTION:
BUTTERFLY, LUG TYPE HP 28" 150# ANSI RTFE


DESCRIPTION:
BUTTERFLY, LUG TYPE HP 30" 150# ANSI RTFE


DESCRIPTION:
VALVE, BTRFLY 3" LG, VTNRS150#ANSI.EPXCGROP


MISC:
WAFER TYPE, FF API 609, CAT A/AWWA C504 BARE SHAFT, BODY ASTM A216 GR WCB, DISC ASTM A890 GRD CD4MCu SPINDLE O-RING EPDM, BEARING BUSHING NYLON. DESCRIPTION: POSITIVE SHUT OFF, BI-DIRECTIONAL

DESCRIPTION:
VALVE, SEATLSS BTRFLY 4" CD4 DISC/WCB BDY

NOTES:
CLASS II (5% LEAKAGE OF MAIN FLOW) DOUBLE FLANGED. CENTRIC DISC LOW LEAKAGE DESIGN. API-609 STD.


DESCRIPTION:
VALVE, SEATLSS BTRFLY 6" CD4 DISC/WCB BDY


DESCRIPTION:
VALVE, SEATLSS BTRFLY 10" CD4 DISC/WCB BDY


MISC:
SEAL PTFE, WORK PRES. TO 10KG/CM3, API598 TESTING, FULL LUG TYPE ANSI B 16.5 (150#)

DESCRIPTION:
BFV, LG CF8 BODY, CF8 DISC,17-4 SHAFT,6",150#

NOTES:
DOUBLE OFFSET HIGH PERFORMANCE ANSI CLASS VALVES GEAR OPERATED


DESCRIPTION:
BFV, LG CF8 BODY, CF8 DISC,17-4 SHAFT,10",150#


DESCRIPTION:
BFV, LG CF8 BODY, CF8 DISC,17-4 SHAFT,12",150#


DESCRIPTION:
BFV, LG CF8 BODY, CF8 DISC,17-4 SHAFT,20",150#


DESCRIPTION:
BFV, LG CF8 BODY, CF8 DISC,17-4 SHAFT,24",150#


DESCRIPTION:
BFV, LG CF8 BODY, CF8 DISC,17-4 SHAFT,30",150#


MISC:
Pneumatic 
Double Acting
10 kg/cm2
ANSI B16.5 class 150 
EPDM - HTP encapsulated sleeve Slurry

DESCRIPTION:
VALVE, KGD 12" AC VALVE C/W PNEUMATIC CLYNDER VALVE


NOTES:
CLARKSON SELLS LIST X .6 TO DISTRIBUTORS. COMPLETE SLEEVE IS $1211.00 (2PC). IPT COST IS $385 FOR 1 PC.


MISC:
DESW CATEGORY DBA8150-K-361736MT ANSI VALVES

DESCRIPTION:
BUTTERFLY, HP METSO VLV 12" 150# C/W HND CRK


DESCRIPTION:
BUTTERFLY, HP METSO VLV 16" 150# C/W HND OP.


DESCRIPTION:
VALVE, SEATLSS BTRFLY 12" CD4 DISC/WCB BDY


DESCRIPTION:
VALVE, SEATLSS BTRFLY 8" CD4 DISC/WCB BDY


MISC:
316SS, 17-4PH SHAFT, F316 SEAT, DOUBLE OFFSET HP ANSI CLASS VALVES GEAR SS316+Graphite DISC SEAT


NOTES:
bare stem (torque with 1.3 safety factor: 958N.m, stem: 35mm, ISO F14)


MISC:
316SS, 17-4PH SHAFT, PPL SEAT, DOUBLE OFFSET HIGH PERFORMANCE ANSI CLASS VALVES GEAR OPERATED


NOTES:
bare stem (torque with 1.3 safety factor: 734N.m, stem: 28mm, ISO F10)


DESCRIPTION:
CASING, COMPLETE W/BRG CAPS #250-65-1003


DESCRIPTION:
CASING, COMPLETE W/BRG CAPS #253-78-1203


DESCRIPTION:
VALVE, TILTING DISC FLANGED 30" C/W DAMPENER


NOTES:
Specs:

a)      Non-revolving parallel seats

b)      Integral wedging and by-pass

c)      Cast Iron body, ASTM A-536 Ductile Iron Gates, Case & Bonnet.  Case & Bonnet shall be sealed by O-Rings.

d)      Equipped with positive operating internal device which will press disc seats firmly against body seats when valve is closed and shall release load before disc starts to move when valve is being opened

e)      ¾” NPT pipe plugs in each side of bonnet

f)       Equipped with clean out ports on each side of lower case

g)      OS&Y sliding stem

h)      Flange shall be flat face, drilled for Class 125 lbs. standard, ANSI B-16.1

i)       Equipped with packing box designed for “V”

Ring type packing and sized to allow replacement of packing without removal of actuator.

j)       Monel intermediate shaft, ANSI 304 Stainless Steel shaft coupling and gib key

k)      Gate rings shall be provided with “O” Ring Seals between gate and gate ring

l)       25 PSI working pressure

m)    Internal & External coated with Tnemec

Series 140 Pota-Pox Plus

Prime coat (1) @ 3 – 5 mils

Top coats (2) @ 4 – 6 mils / coat

Total Dry Coat Thickness: 11 – 17 mils

n)      Hydrotest prior to coating. 50 PSI for 15 min with NO leak

o)     Leakage test after final assembly (& coating) 50 PSI for 10 min. with < 1 oz/hr/inch seat dia.

p)      Standard Valve Hydrostatic Test report reqd.


DESCRIPTION:
VALVE, ANSI B16.5 150# NAT GUM RBR 316SS KNIFE

NOTES:
PRICE IS FOB PORTLAND USA, INCLUDES 10% COMMISSION TO STU


MISC:
QUOTING DOUBLE OFFSET WAFER TYPE 150# CLASS, WCB, CF8M DISC, 17-4PH STEM, RPTFE SEAT WITH GEAR CHWHEEL


NOTES:
409-91000-00 (Chain Wheel Op for 08235443550 ) 2.5 (Chain for Chain Wheel Op 409-91000-00)
VALVE: Butterfly; 8" & 10:, Series 250 Wafer, Carbon Steel Body, 285PSI Standard Service, 316 Stainless Steel Disc and Stem/Shaft, PTFE Bushings, Gear Operator with Chainwheel and Chain- Length of Chain Drop required to be advised 

 
	

 
	

Carbon Steel Body, 285PSI Standard Service,

 
	

 
	

316 Stainless Steel Disc and Stem/Shaft, PTFE

 
	

 
	

Bushings, Gear Operator with Chainwheel and

 
	

 
	

Chain- Length of Chain Drop required to be advised 

 

 
	

 
	

by APS P.V..


MISC:
WEDGE A105+ENP, SEAT PTFE TYPE DOUBLE DISC GATE VALVE RATED 150#, 16" FACE TO FACE.


MODEL:
MK II & III GRP IIMK II & III GRP IIMK II & III GRP IIMK II & III GRP II


DESCRIPTION:
VALVE, BTRFLY 5" LG, VTNRS150#ANSI.EPXCGROP


DESCRIPTION:
VALVE, 10" KNFGT 310SS TG10-HYDL-174EPDM EQUAL


DESCRIPTION:
VALVE, BTRFLY 22" LG, VTNRS150#ANSI.EPXCGROP


DESCRIPTION:
VALVE, BTRFLY 24" LG, VTNRS150#ANSI.EPXCGROP


MISC:
F6 PIN, SEAT: PRESSURE SEALING INTEGRAL SEAT OVERLAY STL

DESCRIPTION:
CHECK, VALVE TLTNG DSC ANSI B16.34 WCB+STL DISC


DESCRIPTION:
BFV, 36" WFR, GNRL.SRVC, A48, EPDM, 316SS, GROP.


DESCRIPTION:
BFV, 4" WFR, GNRL.SRVC, A126, EPDM, 316SS, GROP.


DESCRIPTION:
BFV, 6" WFR, GNRL.SRVC, A126, EPDM, 316SS, GROP.


DESCRIPTION:
BFV, 8" WFR, GNRL.SRVC, A126, EPDM, 316SS, GROP.


DESCRIPTION:
BFV, 10" WFR, GNRL.SRVC, A126, EPDM, 316SS, GROP.


NOTES:
B073M Tyler $100 06/16 EJE; Elastomex $457


NOTES:
HEBEI DOES NOT MAKE!!!! WIER $4.62 IN 2009


NOTES:
TYLER:$864 05/17; ELASTOMX $979 06/17. 720.00NYSTR DDG 820.00;  air cost for 22pc to laredo $5650


NOTES:
Tyler $1.50 06/17 ANILLO O-DEL IMPULSOR; Elastomex $11


NOTES:
Tyler B061 $8 06/16 TUERCA CANDADO DEL LABERINTO


NOTES:
Tyler B089-10 $3 06/16 SELLO DE RODAMIENTO


NOTES:
Tyler $70 06/16 RESTRICTOR DE LINTERNA 
/ FRONT LANTERN RESTRICTOR RING 3/2 PUMP SIZE


MISC:
ACCESSORY KIT#K032CF0016800E6, SOLD $177 JAN 2015

NOTES:
Tyler $50 06/16 MANGA DEL EJE (Pump Size 3/2 ,4/3); ELASTOMAX $238 06/17.


NOTES:
Tyler $80 06/17 REVESTIMIENTO DEL PLATO DECUBIERTA; Elastomex $254 06/17


NOTES:
Tyler $139 06/17 IMPULSOR (Pump Size 2/1.5); ELASTOMX $462 06/17. 12/17 Won quote over 9% and 3 wks faster


Tyler $139 06/16  IMPULSOR    NOTE: FOR GILDERSLEEVE, REMOVE EXPELLER VANES "BR"


NOTES:
Tyler $30 06/17,Elastomex $117 06/17. sold to Plantel Los Angeles $161.25, 05/18


NOTES:
Tyler $50 06/17 ESPACIADOR DE LA FLECHA; Elastomex $219


NOTES:
Tyler $90 06/17 FRAME PLATE LINER INSERT, SOLD TO PLANTEL LOS ANGELES $273.75, 05/18


NOTES:
Tyler $600 06/16 VOLUTE LINER (Pump Size 3/2)


MISC:
STUD IS M30 X 125MM LONG, COMPETITOR $168.75 04/17

DESCRIPTION:
STUD, MOTOR SUPPORT C/W 2 M30 NUTS D066ME62


NOTES:
Tyler $120 6/17 IMPELLER; ELASTOMX $326, 06/17.


MISC:
FRAME C, 2030RPM (SLURRY); sold $632 02/14

NOTES:
Tyler $260 06/16 VOLATE LINER, SOLD $411.25 TO PLANTEL LOS ANGELES, 05/18


NOTES:
Tyler $N/A 06/16 TORNILLOS PARA EL INSERTO DELREVESTIMIENTO


MISC:
Per DL Sept20,2018: supply 5 vanes which is better and interchangeable with 3 vanes. No 3 vanes in the market.  B1127 is 5 vanes


DESCRIPTION:
RING, DISCHARGE JOINT 54-001-05115 B1132HS01


MISC:
25MP40-7, 47mm X 2.6mm cross section; 4.20, $9.00 TO ESSO

NOTES:
Tyler $7.65 06/17 ANILLO O - PARA MANGA DEFLECHA


NOTES:
No notes on "Analisis de Refracciones Para Bombas


MISC:
E4032D21(FramePlate) $235. IF ORDER ONE SET FramePlate&COVERPlate, TOTAL cost $500.00


MISC:
Tyler $69 06/17 (D046) RETENEDOR DE GRASA


NOTES:
Tyler $6.50 06/16 B046 RETENEDOR DE GRASA


NOTES:
Not in competitors price list, ELASTOMEX $55 06/17; WEIR $97.81 IN 2009


NOTES:
Tyler $43 06/16 ANILLO JUNTA DE SUCCION; Elastomx $52


DESCRIPTION:
PLATE, COVER PLATE BOLT W/2 NUTS E4015ME66


NOTES:
Tyler $10 06/16 FRAME PLATE BOLT - 1 NUT


NOTES:
Tyler $15.00 06/16 C06210D81A LABYRINTH DRIVE END


DESCRIPTION:
SEAL, DOUBLE MECHANICAL CRO TYPE SC/FACES


NOTES:
Tyler $10 06/16 CLAMP BOLT - 1 NUT; Elastomex $51


NOTES:
Tyler $N/A 06/17 TORNILLO DEL REVESTIMIENTO


MISC:
USE WITH 100ZJIA50, 150ZJIA42, 150ZJIA50


MISC:
USE WITH 100ZJIA50, 150ZJIA42 & 150ZJIA50


MISC:
$65.00 7/14. P50 is imported material, need 20 days. C21 will be 10 days.

NOTES:
Tyler $34 06/17 "Anillo' RESTRICTOR DE LINTERNA; Elastomex $92


NOTES:
Tyler $70 06/17 REVESTIMIENTO DE CARCAZA


NOTES:
TYLER$82 06/17; elastomex $269, note: quote $149/ea to make total sales on quote less than $4200. normal price $159


NOTES:
Tyler $190 06/16 REVESTIMIENTO DEL PLATO  (Pump size 4/3), $369 4/17.


NOTES:
Tyler $180 06/16 REVESTIMIENTO DE LA CARCAZA (Pump Size 4/3). 369.00MCHT(4/17)


DESCRIPTION:
STUD, FRAME PLATE LINER 1 NUT M12Z3-80VV

NOTES:
Tyler $N/A 06/16 TORNILLO DE REVESTIMIENTO


NOTES:
Tyler $305 16/16 PLATO DE CUBIERTA (Pump Size 4/3)


DESCRIPTION:
SOCKET, LABYRINTH SET SCREW CUP POINT M12A225H


DESCRIPTION:
GLAND, 2 PC INC. 2 GLAND CLAMP BOLT+1 NUT, M10H1-80SN


MISC:
ASBESTOS FIBER DOWSING WITH MICA   /  C111Q31


# PartData20190813

DESCRIPTION:
IMPELLER, 16-1/2" DIA 3V 400BHN - P/N 411744 (CANADA PUMPS STANDARD P/N 3)

OEM PART#:
P/N 411744 (CANADA PUMPS STANDARD P/N 3)


DESCRIPTION:
GLAND, SPLIT - P/N G-1878 (CANADA PUMPS STANDARD 12A)


DESCRIPTION:
CASING - P/N 410394-5 (CANADA PUMPS STANDARD P/N 2)

OEM PART#:
P/N 410394-5 (CANADA PUMPS STANDARD P/N 2)


DESCRIPTION:
GLAND, SPLIT - P/N G-1253 (CANADA PUMPS STANDARD P/N 12A)

OEM PART#:
P/N G-1253 (CANADA PUMPS STANDARD P/N 12A)


DESCRIPTION:
SLEEVE, SHAFT PLASMA COATED - P/N 319344 (CANADA PUMPS STANDARD P/N 8)

OEM PART#:
P/N 319344 (CANADA PUMPS STANDARD P/N 8)


DESCRIPTION:
GLAND, SPLIT, C/W 4 BOLT - P/N 314781 (CANADA PUMPS STANDARD P/N 12A & 13A)

OEM PART#:
P/N 314781 (CANADA PUMPS STANDARD P/N 12A & 13A)


DESCRIPTION:
IMPELLER, 22" DIA 3V 400BHN W/RNG - P/N 314992 (CANADA PUMPS STANDARD P/N 3 & 3A)

OEM PART#:
P/N 314992 (CANADA PUMPS STANDARD P/N 3 & 3A)


DESCRIPTION:
SCREW, IMPELLER WEAR RING 49514-227-2229


DESCRIPTION:
IMPELLER, SUCTION 1ST STAGE 104-896-3BRZ


NOTES:
ALCOA DWG #001165.PDF   (ONE TIME PATTERN TOOLING = $687.50)


NOTES:
***NOTE: CHECK DWG#1214-J4 FOR LATEST REVISION BEFORE MANUFACTURING.***


NOTES:
***NOTE: CHECK DWG#1145-J4 FOR LATEST REVISION BEFORE MANUFACTURING.***


NOTES:
ALCOA DWG#001359.PDF   (ONE TIME PATTERN TOOLING = $375.00)


DESCRIPTION:
HOUSING, F004MD21 BEARING 10/8 FAH 12/10 FAH


MISC:
WEIR #G10041MA05 INCLUDES #G10026ME62 STUD & NUT


MISC:
CHANGES UP TO #F6041-19MA05 WHICH COMES WITH #E10026ME62 LINER STUD


MISC:
SIZE: 92MM X 85MM X 3.5MM THICK; GJZJAMJ0036870


NOTES:
FOR FOB HOUSTON 40 FREIGHT, 30 CLEAN FEE, 40. PROFIT


NOTES:
FOB HOUSTON - 120.00 GROUND
 FREIGHT,  CLEANING 45.00


NOTES:
FOR HOUSTON 120. FREIGHT, 45.00 CLEANING


NOTES:
NOTE: DRAWING NUMBER ASSIGNED, BUT NOT DRAWN YET. JS


MISC:
ALSO SAME STOCK NUMBER SHOWS P/N 046978G010-1228


DESCRIPTION:
BOWL ASSEMBLY, C/W STRAINER DEEP WELL - P/N 14JKH 11stage


NOTES:
1 TIME CHARGE, PATTERN TOOLING $4800.00 NET


DESCRIPTION:
RING, CASE WEAR NITRONIC 60SS  08111670010


DESCRIPTION:
HUB, STUFFINGF BOX COVER 051942G000-1002


MISC:
BEARING|BALL|SINGLE ROW|RADIAL THRUST|LIGHT(200) SERIES||||55 MM (2.1654 IN) BORE|100 MM (3.9370 IN) O.D.||CONRAD TYPE||21 MM (0.8266 IN) TH


DESCRIPTION:
PUMP, BARE SHAFT 550GPM 7-3/4" DIA. IMPELLER


MISC:
ASTMA216 WCB CARBON STEEL #0E00562A23-1212

NOTES:
SEE ASSEMBLED EXPLODED VIEW DRAWING 8001067-J3


DESCRIPTION:
NUT, STUD F.P.L. METRIC W/M20H12-Z; G10026ME62


DESCRIPTION:
SEAL, LABYRINTH BEARING ISOLATOR 5212851-8001


DESCRIPTION:
RING, RETAINING A06941A3-CRB STL ZING CTD


NOTES:
SUPPLY WITH OIL SIGHT GLASS & BOLTS & STUDS SHOWN ON THE DRAWING


MISC:
MED 300 75MM BORE 160MM OD 37MM THICK 7315BECBY


MISC:
GOULDS PUMPS INC., CASING GASKET, FIBER W/EPDM RUBBER


MISC:
FOR NUP-314ECP MODEL CYLINDERICAL ROLLER BEARING NUP-314ECP


MISC:
MOD 1X2-8SSH, POT WATER BOOSTER, SL. #C0153224, 1X28SSH


MISC:
MANDREL CUT RINGS, SEPCO ML5602 MATL 10GMA (28-2A) (38-3A)


MISC:
SHAFT SLEEVE TUNGSTEN CARB COAT PER AWA STD 611 DWG 10 GMA28


MISC:
CASTING BEARING ASSEMBLY, BUNA-N (NITRILE)


MISC:
150MM (5.9055 IN) BORE SPHERICAL 150SD22W33


MISC:
DISC THROAT COVER, 28% CHROME IRON, 10GMA-28


MISC:
WRAPFLEX, SZ 4545, 4 1/2 IN CLERANCE FIT BORE SZ 3400413


MISC:
FALK, 70R COUPLING SZ, WRAPFLEX R10 ELEMENT 3700221


MISC:
FALK, 70R SZ, 5 IN DIA (INTERFERENCE FIT)


MISC:
HEX HIGH TEMP, 1-8 UNC THRD STL, STD FINISHED ASSTM A194 GRADE 2H


MISC:
STUD 1 IN DIA, 8 IN L, 1-8 THRD, ASSTM A193-B7 HIGH TEMP FULL THRD L


MISC:
EMRSON 50 HP PRINTED CIRCUIT SNUBBER ANALOG 02-766390-01


MISC:
MANDREL CUT RINGS, SEPCO FOR MODEL 10GMA (28-2A) (38-3A) AL04GOU01


MISC:
7 IN BORE, 10 IN OD, 2 IN W, FLAT SEATS, RETAINER ROLLER 7OTP129


MISC:
GEN. PURPOSE, CEMENT, MULTIPURPOSE, ERD, TUBE 10.3 OZ RTV106


MISC:
GOULDS, CASTING, BEARING ASSEMBLY, BUNA-A (NITRILE)


MISC:
GOULDS, BLOW OFF, CARBON TEF LYNX901054B


MISC:
E70 COUPLING SZ, 1 IN BORE, 3535 TAPER LOCK BUSHING 840


MISC:
CLOSE COUPLED, E70 COUPLING SZ, 1/2 IN BORE, SOLID HUB, 700


MISC:
150MM (5.9055 IN) BORE, 270MM (10.6299 IN) OD, 96MM (3.7795 IN) W, SPHERICAL, STRG WITH 3 OIL HOLES, SELF-ALIGNING 23230W33


MISC:
180MM (7.0866 IN) BORE, 320MM (12.5984 IN) OD, 112 MM(4.4094 IN) W SPHERICL, STRG, SELF-ALIGNING 23236 C


MISC:
7 IN BORE, 12 IN OD, 2 IN W, FLAT SEATS, RETAINER, ROLLER 70TP131


MISC:
150MM (5.9055 IN) BORE, SPHERICAL WITH 3 OIL HOLES, 150SD22W33


MISC:
170MM (6.6929 IN) BORE, SPHERICAL WITH 3 OIL HOLES, 170SD22W33


MISC:
L:3-5/8 IN, SIZE 8, FOR AJAX COUPLING #3-5/8A WITH 10 HOLES FOR MORRIS PUMP


MISC:
FOR 12X14 M. OV. BLOW OFF PUMP DISCHARGE VALVE P/N 5116NSK


MISC:
BUNA-N (NITRILE) 5/16 IN I.D., 70 DURO, SOFT


MISC:
SINGLE ROW, ANGULAR CONTACT THRUST, MED (300), 60MM (2.3622 IN) BORE, 130MM (5.1181 IN) O.D, DUPLEX, 31MM (1.2205 IN) THICK, 7312DFDT


MISC:
60 MM(2.3622 IN) BORE, SPHERICAL, STRAIGHT WITH 3 OIL HOLES,  60SD23W33


MISC:
LANTERN RING, P/N 054291G0705159, GOULDS FOR 2RX, MORRIS PUMP S/N M8703-05


MISC:
GOULDS, 2RX, SHAFT SLEEVE, TUNGSTEN CARB COAT PER AWA SRD 611


MISC:
5-1/4 IN SHAFT DIA, 6-1/4 IN O.D. IN TH, A41, BUNA-N (NITRILE) 53X3059


MISC:
HORZ CENTRIFIGUAL, HUB DISC, RUBBER CLOTH INSERT,


MISC:
HORZ CENTRIFIGUAL, IMPELLER, ORGANIC FIBER,


DESCRIPTION:
DISC, 2JC14 HORIZONTAL CENTER 050388G000-1002


DESCRIPTION:
HUB, 3VJC14 VERTICAL SUMPS 051942G000-1002


MISC:
GOULDS, MODEL 3VJCA AND JC, AGITATOR ASSEMBLY, 8 IN SZ, BUNA-A (NITRILE) C02495A3835302


MISC:
FOR 12X14 M. OV. BLOW OFF PUMP DISCHARGE VALVE P/N 51309NSK


MISC:
MORRIS PUMPS INC, MANDREL CUT RINGS, SEPCO FOR MODEL 2 RXF (2X4) AL070MOR01


MISC:
GOULDS,3 X 4 X 10 EQUIP SZ,RETAINING,CS, 58101-393


MISC:
SINGLE ROW,RADIAL THRUST,MED(300),45 MM (1.7717 IN) BORE,100 MM (3.9370 IN) O.D.,CONRAD,25 MM (0.9843 IN) TH, 6309


MISC:
GOULDS,6 X 4-10 EQUIP SZ,MECHANICAL SEAL, ROTARY/STATRY,VITON MAT,INBOARD/OUTBOARD LABYRINTH, C02495A2245304


MISC:
GOULDS,MODEL 3316/M 13X4-116,LANTERN,TEFLON MATL, R76293 ITEM 105


MISC:
GOULDS,VANE (5),7-1/2 IN DIA,DI,W/ TEF O-RING,


MISC:
GOULDS,BEARING, OUTBOARD,CARBON FILLED TEF, D08717A46-6241


MISC:
6 IN PIPE,150 LB RATING,1/16 IN THICK,8-3/4 IN O.D.,NON-ASBESTOS,6-5/8 IN I.D.,


MISC:
8 IN PIPE,150 LB RATING,1/16 IN THICK,11 IN O.D.,NON-ASBESTOS,8-5/8 IN I.D.,


MISC:
DOUBLE ROW,ANGULAR CONTACT THRUST,MED(300),45 MM (1.7717 IN) BORE,100 MM (3.9370 IN) O.D.,1-9/16 IN TH, 5309AHC3


MISC:
GOULDS PUMPS INC,MANDREL CUT RINGS,SEPCO ML560 MATL,FOR MODEL 3196 XLT-X,(6X8-15) (8X10-13), AL04GOU05


MISC:
DOUBLE ROW,RADIAL THRUST,MEDIUM(300) SERIES, 83-36-98


MISC:
GOULDS,MODEL 3196 1XLTX 16 X 8-15XLTS,LANTERN,TEFLON MATL, R76298 ITEM 105


MISC:
GOULDS,8 X 10-13,BEARING, END,COUPLING END,


MISC:
GOULDS,8 X 10-13,BEARING, OUTBOARD,TEF, CARBON FILLED,WITH VITON 0-RING, D04584A07


MISC:
GOULDS,8 X 10-13,LABYRINTH, INBOARD,TEF CARBON, D08717A08


MISC:
12 X 14,45 DEG ANGLE KNOCKER,DWG A-58362,ITEM NO. 7,


MISC:
TO CONVERT 3196XLTX,8 X 10-13 PUMP TO 8 X 10-15,GOULDS P/N 70782 49


MISC:
GOULDS,OIL LUBRICATION, SEALED FRAME, A01113A02


MISC:
GOULDS, 2X3-14, AGITATOR ASSEMBLY, 8 IN, RETROFIT, C02495A1485302


MISC:
SINGLE ROW, ANGULAR CONTACT THRUST, 1/2 IN BORE, RADIAL 221RBD


MISC:
SINGLE ROW, ANGULAR CONTACT THRUST, 105MM (4.1339 IN) BORE, 190MM (7.4803 IN) O.D., DUPLEX, 40MM (1.5748 IN) TH, 7221DF


MISC:
SINGLE ROW, ANGULAR CONTACT THRUST, 120MM (4.7244 IN) BORE, 215MM (8.4646 IN), O.D., DUPLEX, 40MM (1.5748 IN) TH, 7224D


MISC:
120MM (4.716 IN), 12 TPI, 0.823 IN MAX TH MAX TH, RH THRD, 0.798 IN MIN TH MIN TH, AFBMA AN-24 SPEC


MISC:
AGITATOR DRAFT, 8 INCH, P/N C03042E0003201 FOR 8 IN AGITATOR ASSEMBLY, GOULDS VJC 4 X 6-14 SUMP PUMP, C03042E0003201


MISC:
GOULDS, PUMPSMART MOD PS200, 480 VAC, 157 AMP, 125 HP,


MISC:
GOULDS, MODEL 3196, 4X6-17 SZ, LAB SEAL, O-RING, BUNA-N, C02495A1465304


MISC:
GOULDS, MODEL 3196, 4X6-17 SZ, LAB SEAL O-RING, VITON, AS568-230, C02495A2305304


MISC:
GOULDS, MODEL 3196, 4X6-17 SZ, LAB SEAL O-RING, BUNA-A, C02495A415302


MISC:
GOULDS, MODEL 3196, 4X6-17 SZ, LABYRINTH SEAL, O-RING, C02495A2295304


MISC:
GOULDS, MODEL 3196, 4X6-17 SZ, ADAPTER GASKET, VELLUMOID, 73078-5163


MISC:
GOULDS, MODEL 3196, 4X6-17 SZ, INBOARD LABYRINTH SEAL,


MISC:
GOULDS, MODEL 3196, 4X6-17 SZ, OUTBOARD LABYRINTH SEAL, A04951A23


MISC:
GOULDS, MODEL 3196, 4X6-17 SZ, OUTBOARD BALL BEARING, 8049-31300


MISC:
GOULDS, MODEL 3196, 4X6-17 SZ, IMPELLER O-RING, TEFLON, C0245A346359


MISC:
GOULDS, MODEL 3196, 4X6-17 SZ, BEARING HOUSING O-RING, BUNA-N, C02495A2615302


MISC:
GOULDS, MODEL 3196 & 3197, INBOARD BALL END BEARING, 805031360


MISC:
P/N 73523 3,FOR GOULDS PUMP MODEL 3196 MTX 2X3-8,SERIAL #747E475,USED AT BLDG 50 CAUSTIC CLEANING PUMP &  FOR FRAME ADAPTER, PUMP MODEL 3196 X17, 4X6-17, 735233


MISC:
GOULDS, IMPELLER TYPE, 1X1-1/2 IN, C02495A28-6359


MISC:
SA W/TEL 6 VANE FOR GOULDS 3196 LTX3X4-13 PUMP,P/N 0B10591 1013,IMPELLER DIAMETER = 9.25 INCHES, 0B105911013


MISC:
ASSEMBLY FOR GOULDS 3196 LTX3X4-13 PUMP P/N RC03044A 2238, RC03044A-2238


MISC:
SHAFT FOR GOULDS 3196 LTX3X4-13 PUMP,P/N 9196X 2229


MISC:
BEARING N-10 FOR GOULDS 3196 LTX3X4-13 PUMP,P/N 8601-0010


MISC:
LABYRINTH OUTBOARD (VBXX-D),FOR GOULDS 3196 LTX3X4-13 PUMP,P/N A04951A132


MISC:
LABYRINTH INBOARD (VBXX-D) FOR GOULDS 3196 LTX3X4-13 PUMP,P/N A04951A131


MISC:
BEARING W-10 FOR GOULDS 3196 LTX3X4-13 PUMP,P/N 8910-0010


MISC:
VITON FOR GOULDS 3196 LTX3X4-13 PUMP,P/N C0245A2255304


MISC:
AS568-36 BUNA-N FOR GOULDS 3196 LTX3X4-13 PUMP,P/N CO245A36 5302


MISC:
VITON AS568-140 FOR GOULDS 3196 LTXX3X4-13 PUMP,P/N C0245A1405304


MISC:
VITON,2-5/8 IN (66.27 MM) I.D.,2-7/8 IN O.D,1/8 IN (3.53 MM) CROSS SECT,,STD INDUSTRIAL SIZE AS568-231,


MISC:
VITON,1-3/4 IN (44.04 MM) I.D.,2 IN O.D,1/8 IN (3.53 MM) CROSS SECT,,STD INDUSTRIAL SIZE AS568-224,


MISC:
VITON,4-3/8 IN (110.72 MM) I.D.,4-5/8 IN O.D,1/8 IN (3.53 MM) CROSS SECT,,STD INDUSTRIAL SIZE AS568-245,


MISC:
VITON,1-3/8 IN (34.65 MM) I.D.,1-1/2 IN O.D,1/16 IN (1.78 MM) CROSS SECT,,STD INDUSTRIAL SIZE AS568-028,


MISC:
45 MM (1.7717 IN),LOW CS,17 TANGS,0.063 IN MAX THICK MAX TH,0.053 IN MIN THICK MIN TH, 906309


MISC:
3 X 4 X 8 IN,3196MTX,550 GPM FLOW RATE,7-3/4 IN, 3X4X8GMTX1-X210


MISC:
GOULDS,MODEL 3196,FRAME TO ADAPTER TYPE,NON-ASBESTOS, 73078-5163


MISC:
GOULDS,6 X 4-10G,OUTBOARD LABYRINTH, ROTARY, C02495A216530


MISC:
8 IN PIPE,150 LB RATING,1/16 IN THICK,11 IN O.D.,NON-ASBESTOS,8-5/8 IN I.D.


MISC:
P/N 0100-161 1203,SA W/TFL,O-RING 5 VANE,FOR GOULDS PUMP MODEL 3196 MTX 2X3-8,SERIAL # 747E475,USED AT BUILDING 50 CAUSTIC CLEANING PUMP, 1001611203


MISC:
SPECIAL,P/N A01081A06,SB PACKMASTER 1,FOR GOULDS PUMP MODEL # 3196 MTX 2X3-8,SERIAL # 747E475,USED AT BUILDING 50 CAUSTIC CLEANING PUMP, A01081A06


MISC:
FRAME ASSEMBLY,P/N 262-92 1013,FOR GOULDS PUMP MODEL 3196 MTX 2X3-8,SERIAL # 747E475,USED AT BUILDING 50 CAUSTIC CLEANING PUMP, 262921013


MISC:
P/N 73707 6956,FOR GOULDS PUMP MODEL 3196 MTX 2X3-8,SERIAL # 747E475,USED AT BUILDING 50 CAUSTIC CLEANING PUMP, 737076956


MISC:
WINDOW,P/N A01154A05,FOR GOULDS PUMP MODEL 3196 MTX 2X3-8,SERIAL #747E475,USED AT BUILDING 50 CAUSTIC CLEANING PUMP, A01154A05


MISC:
P/N 27177 607 2229,FOR GOULDS PUMP MODEL 3196 MTX 2X3-8,SERIAL #747E475,USED AT BUILDING 50 CAUSTIC CLEANING PUMP,


MISC:
P/N 49568 118 2213,SQUARE END,FOR GOULDS PUMP MODEL 3196 MTX 2X3-8,SERIAL #747E475,USED AT BUILDING 50 CAUSTIC CLEANING PUMP


MISC:
P/N 73523 3,FOR GOULDS PUMP MODEL 3196 MTX 2X3-8,SERIAL #747E475,USED AT BUILDING 50 CAUSTIC CLEANING PUMP AND FOR FRAME ADAPTER, PUMP MODEL 3196 X17, SIZE: 4X6-17, 735233


MISC:
2-5/8 IN (66.27 MM) I.D.,2-7/8 IN O.D,1/8 IN (3.53 MM) CROSS SECT,STD INDUSTRIAL SIZE AS568-231,


MISC:
1-3/4 IN (44.04 MM) I.D.,2 IN O.D,1/8 IN (3.53 MM) CROSS SECT,,STD INDUSTRIAL SIZE AS568-224,


MISC:
4-3/8 IN (110.72 MM) I.D.,4-5/8 IN O.D,1/8 IN (3.53 MM) CROSS SECT,,STD INDUSTRIAL SIZE AS568-245,


MISC:
1-3/8 IN (34.65 MM) I.D.,1-1/2 IN O.D,1/16 IN (1.78 MM) CROSS SECT,,STD INDUSTRIAL SIZE AS568-028,


MISC:
45 MM (1.7717 IN),LOW CS,17 TANGS,0.063 IN MAX THICK MAX TH,0.053 IN MIN THICK MIN TH, 90630


MISC:
GOULDS,MODEL 3196 3 X 4X8G MTX,OIL,ALLOY 20, R196MTPRKO


MISC:
MODEL 3316/M 13X4-116,LANTERN,TEFLON MATL, R76293 ITEM 105


MISC:
REXNORD,ES5-R COUPLING SZ,URETHANE,OMEGA SPACER ELEMENT,2 PIECE,W/ HIGH SPEED RINGS, 7300090


MISC:
2-5/8 IN (66.27 MM) I.D.,2-7/8 IN O.D,1/8 IN (3.53 MM) CROSS SECT,,STD INDUSTRIAL SIZE AS568-231,


MISC:
INGERSOLL-RAND,5 CRVL,PACKING,SPLIT, 2 HALVES, 175G16CSX1543F


MISC:
INGERSOLL-RAND,SQUARE HEAD, PACKING GLAND,CS MAT,3/8-16 UNC THRD,W/NUT, GLAND, Y240737175


MISC:
SINGLE ROW,RADIAL THRUST,MED(300),SNAP RING,45 MM (1.7717 IN) BORE,100 MM (3.9370 IN) O.D.,MAX,25 MM (0.9843 IN) TH, 309WG


MISC:
SET, RING, PACKING MOLD,GRAPHITE, BY49122BTFGP2Z113


MISC:
SINGLE ROW,RADIAL THRUST,MEDIUM 300 SERIES,SNAP RING,45 MM BORE,100 MM (3.9370 IN) O.D.,CONRAD TYP,25 MM (0.9843 IN) TH,WITH RETAINING DISC, 6309-NR


MISC:
DURISON,IMPELLAR GASKET PART TYP, SA3210AA00TFR


MISC:
GOULD'S MODEL SP 98S 2X3-6,USED AT BLDG.30 ACID SUMP PUMP,MFG:GOULDS, SP98S2X36


MISC:
OUTBOARD,P/N AY55592A-BBV FOR FLOWSERVE PG 6 X 4-13A / 12.31 RV ACID PUMP,S/N 802-5579 FOR BUILDING 42, AY55592ABBV-OUT


MISC:
P/N DY33074A-D20 FOR FLOWSERVE PG 6 X 4-13A / 12.31 RV ACID PUMP,S/N 802-5579 FOR BUILDING 42, DY33074AD20


MISC:
P/N MY36846AA130-D20 FOR FLOWSERVE PG 6 X 4-13A / 12.31 RV ACID PUMP,S/N 802-5579 FOR BUILDING 42, MY36846AA130D20


MISC:
P/N DY55387A-D20 FOR FLOWSERVE PG 6 X 4-13A / 12.31 RV ACID PUMP,S/N 802-5579 FOR BUILDING 42, DY55387AD20


MISC:
FOR FLOWSERVE PG 6 X 4-13A / 12.31 RV ACID PUMP,


MISC:
P/N Y21963A-SR FOR FLOWSERVE PG 6 X 4-13A / 12.31 RV ACID PUMP,S/N 802-5579 FOR BUILDING 42, Y21963ASR-OUT


MISC:
P/N AY55592A-BBV FOR FLOWSERVE PG 6 X 4-13A / 12.31 RV ACID PUMP,S/N 802-5579 FOR BUILDING 42, AY5552ABBV-IN


MISC:
P/N DY55225C1 FOR FLOWSERVE PG 6 X 4-13A / 12.31 RV ACID PUMP,S/N 802-5579 FOR BUILDING 42, DY55225C1


MISC:
P/N Y21963A-SR FOR FLOWSERVE PG 6 X 4-13A / 12.31 RV ACID PUMP,S/N 802-5579 FOR BUILDING 42, Y21963ASR-IN


MISC:
FOR FLOWSERVE PG 6 X 4-13A / 12.31 RV ACID PUMP FOR BUILDING 42,


MISC:
P/N BY58228A-C276 FOR FLOWSERVE PG 6 X 4-13A / 12.31 RV ACID PUMP,S/N 802-5579 FOR BUILDING 42, BY58228AC276


MISC:
2 X 3-11 SZ,3316M MODEL,HIGH PRESSURE/WATER,ALL IRON MATL,10.75 IN DIA IMPELLER


MISC:
30 MM (1.1811 IN),LOW CS,32 TPI,0.416 IN MAX TH,RH THRD,0.396 IN MIN TH, N-06


MISC:
GOULDS,SERIES 3405 & 3316,WATER DEFLECTOR, 74812-01


MISC:
30 MM BORE,LOW CS MATL,32 TPI,0.416 IN MAX TH,RH THRD,0.396 IN MIN TH, 8601-0006


MISC:
GOULDS,SERIES 3316,COUPLING BALL BEARING,OUTBOARD STYLE,SINGLE TYPE, 8050-30760


MISC:
GOULDS,SERIES 3316,IMPELLER HUB O-RING,TFE, C02495A33-6359


MISC:
GOULDS PUMPS,MODEL 3355 MULTISTAGE,CS MATL, 49568 107 2213


MISC:
GOULDS,P/N 258C454SL,FOR MODEL 3316/M 3X4-11 PUMP,


DESCRIPTION:
IMPELLER, WASHER OVERFLOW BOOSTER, #D02643A01-1000


DESCRIPTION:
IMPELLER, 10-1/2" DIA. SCND STG. 2GT3FX5-CI


DESCRIPTION:
IMPELLER, 9-1/2" DIA. 1ST STG 2GT3GX5-202


DESCRIPTION:
CASING, UPPER & LOWER HRZ SPLT CCN 60520277


MISC:
TO REPLACE THE INGERSOLL RAND PUMPS IN THE S CIRCUIT

NOTES:
SIPF REPLACEMENT TEST PUMP 150ZJA50 WITH 78% EFFICIENCY IS $12,000.00 NET EACH


MISC:
BEARINGS, GASKETS, SEALS, PACKING, MISC. SHAFT ASSY. PARTS.


DESCRIPTION:
RING, CASING - P/N 413138 (CANADA PUMPS STANDARD P/N 9)

OEM PART#:
P/N 413138 (CANADA PUMPS STANDARD P/N 9)


DESCRIPTION:
SLEEVE, SHAFT CHROME OXIDE PLASMA COATED - P/N 310908 (CANADA PUMPS STANDARD P/N 8)

OEM PART#:
P/N 310908 (CANADA PUMPS STANDARD P/N 8)


MISC:
USE 9038-J1 FOR SLEEVE. BRGS ARE SKF #3211 & 7310BG

DESCRIPTION:
SHAFT, FLXSL 3X4DS (CANADA PUMPS STANDARD P/N 7)


DESCRIPTION:
IMPELLER, 20-1/2" DIA 430BHN 8V W/RINGS - P/N 312727(CANADA PUMPS STANDARD P/N 3)


DESCRIPTION:
SLEEVE, SHAFT SHORT - P/N214570 (CANADA PUMPS STANDARD P/N 8)


DESCRIPTION:
SHAFT, FLXSL 12X14-27 S (CANADA PUMPS STANDARD P/N 7 & 7C)


DESCRIPTION:
SLEEVE, STD SHAFT - P/N 319340 (CANADA PUMPS STANDARD P/N 8)

OEM PART#:
P/N 319340 (CANADA PUMPS STANDARD P/N 8)


MISC:
SHAFT DWG #9027-J1 WEAR RING DWG #9012-J1 (SEE FOOT NOTES ON WINDALCO DWG# 261604)

DESCRIPTION:
IMPELLER, 23-1/2" DIA., 400BHN 5V C/W W/RING - P/N 314995 (CANADA PUMPS STANDARD P/N 3 & 4)

NOTES:
26" DIA. MAX. IMPELLER TO BE STATIC BALANCED

OEM PART#:
P/N 314995 (CANADA PUMPS STANDARD P/N 3 & 4)


MISC:
SHAFT DWG #9027-J1 WEAR RING DWG #9012-J1; PATTERN IN INDIA & CHINA

DESCRIPTION:
IMPELLER, 18" DIA., 400BHN 5V W/RING - P/N 314995 (CANADA PUMPS STANDARD P/N 3 & 4)


DESCRIPTION:
SHAFT, FLXSL + SLEEVE - JAD-F-3296 (CANADA PUMPS STANDARD P/N 8)


DESCRIPTION:
SLEEVE, SHAFT PLSMA CTD  - 63RC P/N 311344


DESCRIPTION:
CASING & COVER - P/N 411552-3 (CANADA PUMPS STANDARD 2 & 2A)

OEM PART#:
P/N 411552-3 (CANADA PUMPS STANDARD 2 & 2A)


DESCRIPTION:
COVER, STUFFING BOX - P/N D00781E000-1228


MISC:
B2 BEARING FRAME, Drawing was modified 04/18 by Hopeton


DESCRIPTION:
CASING, W/O BACKWALL -P/N  E00125E000-1228


MISC:
SEE 9026-J1/R2 FOR THE SHAFT STK #600859

NOTES:
SAME DRAWING AS STOCK NUMBERS 600875, 600835 EXCEPT DIAMETER


MISC:
SEAL #180WB-14E P/N 131876 ROTATION CLOCKWISE. IMPELLER TRIM TO 9" DIAMETER

NOTES:
INTMPE MODEL 125S80-370 C/WITH M.S., COUPLING & BASE PLATE S-6 MATERIAL US$10,381.00 CHINA COST


DESCRIPTION:
IMPELLER, 15" DIA 400BHN 3V C/W W/RING - P/N 319181A (CANADA PUMPS STANDARD P/N 3, 3A & 4)

NOTES:
IMPELLER WEAR RING DWG #9007-J1 STOCK #610447 RING INCLUDED IN IMPELLER PRICE

OEM PART#:
P/N 319181A (CANADA PUMPS STANDARD P/N 3, 3A & 4)


DESCRIPTION:
IMPELLER, 18-1/2" DIA 3V 400BHN W/RING - P/N 314992 (CANADA PUMPS STANDARD 3, 3A & 4)

OEM PART#:
P/N 314992 (CANADA PUMPS STANDARD 3, 3A & 4)


DESCRIPTION:
SEAL CAGE, SPLIT - P/N 314084 (CANADA PUMPS STANDARD P/N 14A)

OEM PART#:
P/N 314084 (CANADA PUMPS STANDARD P/N 14A)


DESCRIPTION:
COVER, BEARING OUTBOARD - P/N 311339 (CANADA PUMPS STANDARD P/N 25)

OEM PART#:
P/N 311339 (CANADA PUMPS STANDARD P/N 25)


DESCRIPTION:
IMPELLER, 9" DIA 400BHN 4V CCW - P/N 311334


MISC:
COMPLETE WITH PLUG PART  NUMBER CHANGES TO 16-342-024

NOTES:
REQUIRE SAMPLE TO PRODUCE NEW AND OR REBUILD OLD


MISC:
MAKE NUT DRAWING FROM SHAFT & IMPELLER DWG

DESCRIPTION:
NUT, IMPELLER - P/N 212010 *CANADA PUMPS STANDARD P/N 15)

OEM PART#:
P/N 212010 *CANADA PUMPS STANDARD P/N 15)


DESCRIPTION:
COVER, HAND HOLE SUCTION - P/N G-2919 (CANADA PUMPS STANDARD P/N 42A)

OEM PART#:
P/N G-2919 (CANADA PUMPS STANDARD P/N 42A)


MISC:
INCLUDES  SHAFT, BRG. HSNG., BRG. FRAME, DR. HALF CPL, CASING COVER


DESCRIPTION:
IMPELLER, 15-3/4" DIA 3V 400BHN - P/N 411744 (CANADA PUMPS STANDARD P/N 3)


DESCRIPTION:
IMPELLER, 13-1/4" DIA 400BHN 3V - P/N 319181A (CANADA PMUPS STANDARD P/N 3 & 3A)

OEM PART#:
P/N 319181A (CANADA PMUPS STANDARD P/N 3 & 3A)


DESCRIPTION:
IMPELLER, 14-3/16" DIA 400BHN 3V - P/N 319181A (CANADA PMUPS STANDARD P/N 3 & 3A)


DESCRIPTION:
IMPELLER, 14-5/8" DIA 400BHN 3V - P/N 319181A (CANADA PMUPS STANDARD P/N 3 & 3A)


DESCRIPTION:
GASKET, VALVE COVER 90 DURO  - P/N 16-506-007


DESCRIPTION:
IMPELLER, 15-3/4" DIA 400BHN 3V - P/N 319181A (CANADA PMUPS STANDARD P/N 3 & 3A)


DESCRIPTION:
IMPELLER, 16" DIA 400BHN 3V - P/N 319181A (CANADA PMUPS STANDARD P/N 3 & 3A)


DESCRIPTION:
IMPELLER, 16-1/2" DIA 400BHN 3V - P/N 319181A (CANADA PMUPS STANDARD P/N 3 & 3A)


DESCRIPTION:
RING, IMPELLER WEAR - P/N 314985 (CANADA PMUPS STANDARD P/N 4)

OEM PART#:
P/N 314985 (CANADA PMUPS STANDARD P/N 4)


DESCRIPTION:
RING, IMPELLER WEAR - P/N 210962 (CANADA PMUPS STANDARD P/N 4)

OEM PART#:
P/N 210962 (CANADA PMUPS STANDARD P/N 4)


DESCRIPTION:
IMPELLER, 14-1/8" DIA 400BHN 3V - (CANADA PMUPS STANDARD P/N 3 & 3A)


DESCRIPTION:
IMPELLER, 13-1/2" DIA 400BHN 3V - 319181A (CANADA PMUPS STANDARD P/N 3 & 3A)


DESCRIPTION:
SHAFT & SLEEVE ASSY - P/N 312500 (CANADA PMUPS STANDARD P/N 8)

OEM PART#:
P/N 312500 (CANADA PMUPS STANDARD P/N 8)


DESCRIPTION:
SLEEVE, SHAFT - P/N 312068 (CANADA PMUPS STANDARD P/N 8)

OEM PART#:
P/N 312068 (CANADA PMUPS STANDARD P/N 8)


DESCRIPTION:
BOX, STUFFING SPLIT  - P/N 213777 (CANADA PMUPS STANDARD P/N 47)

OEM PART#:
P/N 213777 (CANADA PMUPS STANDARD P/N 47)


DESCRIPTION:
HOUSING, THRUST BEARING - P/N G-4009(CANADA PUMPS STANDARD P/N 38B)

OEM PART#:
P/N G-4009(CANADA PUMPS STANDARD P/N 38B)


DESCRIPTION:
BEARING CAP THRUST  - P/N G-2552 (CANADA PUMPS STANDARD P/N 23)

OEM PART#:
P/N G-2552 (CANADA PUMPS STANDARD P/N 23)


DESCRIPTION:
SEAL, THRUST BEARING - P/N G-4076 (CANADA PUMPS STANDARD P/N 27)

OEM PART#:
P/N G-4076 (CANADA PUMPS STANDARD P/N 27)


DESCRIPTION:
BEARING COLLAR THRUST  - P/N G-6612 (CANADA PUMPS STANDARD P/N 35B)

OEM PART#:
P/N G-6612 (CANADA PUMPS STANDARD P/N 35B)


DESCRIPTION:
CASING - P/N 410390-1 (CANADA PUMPS STANDARD P/N 2)

OEM PART#:
P/N 410390-1 (CANADA PUMPS STANDARD P/N 2)


MISC:
USES BEARINGS SKF #22220 C2 (180mm) RADIAL & SKF #7415BG (190mm) THRUST.

DESCRIPTION:
STAND & CAP, BEARING - P/N 410132 (CANADA PUMPS STANDARD P/N 22 & 23)

OEM PART#:
P/N 410132 (CANADA PUMPS STANDARD P/N 22 & 23)


DESCRIPTION:
CASING & COVER - P/N 410398 (CANADA PUMPS STANDARD P/N 2 & 2A)

OEM PART#:
P/N 410398 (CANADA PUMPS STANDARD P/N 2 & 2A)


DESCRIPTION:
UPPER IDLE ROLLER  (M 154 482) DWG #4024-J1

NOTES:
***NOTE: CHECK FOR LATEST REVISION BEFORE MANUFACTURING.***


DESCRIPTION:
GASKET, SUCTION (CANADA PUMPS STANDARD P/N 65A)


DESCRIPTION:
TUBE, BOILER S.W. 2" O.D. X 0.134" X 28' LONG


MISC:
3.525" X 5.00 LONG X 2.195" I.D. WITH 3/16" SPIRAL OIL GROOVE


DESCRIPTION:
FLINGER, OUTBOARD (CANADA PUMPS STANDARD P/N 18B)


DESCRIPTION:
COVER, BEARING INBOARD (CANADA PUMPS STANDARD P/N 24)


MISC:
K2 FASTNERS, EDMONTON. 3-3/16"LONG X 1" DIA. EYE I.D. X 1/2" N.C. 316SS

DESCRIPTION:
BOLT & NUT, GLAND SWING 1/2" - P/N 310340  (CANADA PMUPS STANDARD P/N 13A & 13B)

OEM PART#:
P/N 310340  (CANADA PMUPS STANDARD P/N 13A & 13B)


DESCRIPTION:
COVER, HAND HOLE ASTM A532 HARD CHROME  (CANADA PMUPS STANDARD P/N 42)


MISC:
NOTE: SHAFT IS USED WITH PACKING AND NEW SEAL DESIGNS SUPPLIED BY CRS.

DESCRIPTION:
SHAFT, & SLEEVE ASSY. 4X6DSH  (CANADA PMUPS STANDARD P/N 8)


DESCRIPTION:
SLEEVE,  BEARING SPACER- P/N 310103  (CANADA PMUPS STANDARD P/N 41)

OEM PART#:
P/N 310103  (CANADA PMUPS STANDARD P/N 41)


DESCRIPTION:
COVER, BEARING INBOARD  -P/N G-6338  (CANADA PMUPS STANDARD P/N 24)

OEM PART#:
P/N G-6338  (CANADA PMUPS STANDARD P/N 24)


DESCRIPTION:
CASING, W/STUFFING BOX DWG#411335-D (CANADA PUMPS STANDARD P/N 2, 2A & 6 )

NOTES:
NOTE: NEW PRICING RELATES TO 28% CHROME IRON, NOT NIHARD AS OLD PRICE


DESCRIPTION:
GLAND, SPLIT - P/N 310501  (CANADA PUMPS STANDARD P/N 12A)

OEM PART#:
P/N 310501  (CANADA PUMPS STANDARD P/N 12A)


MISC:
MODIFIED FOR CEFILAC SEAL    SLURRY PUMP. Sold to crsjl $580. 02/15

DESCRIPTION:
LINER, DRIVE SIDE 6" CFLC BORE - P/N 215372 (CANADA PUMPS STANDARD P/N 89)

NOTES:
ADVISE BORE WHEN ORDERING, 6" OR 5-3/8" (USE 9011-J1 PATTERN, BUT CHANGE BORE)

OEM PART#:
P/N 215372 (CANADA PUMPS STANDARD P/N 89)


MISC:
ASTM A743 Ni is around 4%, Cr is 13.5%, Mo is 1%

DESCRIPTION:
CASING, MODIFY FOR CARTRIDGE SEAL 400BHN - P/N 412214-5 (CANADA PUMPS STANDARD P/N 2 AND 2A)

OEM PART#:
P/N 412214-5 (CANADA PUMPS STANDARD P/N 2 AND 2A)


MISC:
HEAT TREAT TO 290-320Bhn     MODIFIED FOR CEFILAC SEAL

DESCRIPTION:
CASING, PACKED BOX  - P/N 412214-5 (CANADA PUMPS STANDARD P/N 2 & 2A)

OEM PART#:
P/N 412214-5 (CANADA PUMPS STANDARD P/N 2 & 2A)


MISC:
SEE DWG #1437-J1 FOR WEAR LINER, SUC. SIDE & 1132-J1-2 FOR CASING COVER/ AS STATED ON CLASS A SHEETS P/N 2

DESCRIPTION:
COVER, CASING DRIVE SIDE - P/N 053-D-0002 (CANADA PUMPS STANDARD P/N 2 & 2A)

OEM PART#:
P/N 053-D-0002 (CANADA PUMPS STANDARD P/N 2 & 2A)


DESCRIPTION:
BEARING FRAME (CANADA PUMPS STANDARD P/N 22)


DESCRIPTION:
COVER, SUCTION SIDE (CANADA PUMP STANDARD P/N 5)

NOTES:
***NOTE CHECK FOR LATEST REVISION BEFORE MANUFACTURING.*** (MOLD 861.00)


MISC:
SEE DWG #1437-J1 FOR WEAR LINER, SUC. SIDE & 1132-J1-2 FOR SUC. END COVER & 1267-J1-3 FOR MODIFIED VERSION OF 1132-J1, 1131-J1 CASING COVER

DESCRIPTION:
CASING EV18064 - 500Bhn (CANADA PUMP STANDARD P/N 2)

NOTES:
THERE IS 3 SHEETS FOR THIS 1 DRAWING #1221-J1. SHEET 1 = DIMENSIONS, SHEET 2 = HYDRAULIC PROFILE, SHEET 3 = PLUG DETAILS.


DESCRIPTION:
IMPELLER, 12-1/2"DIA 3V 400BHN (CANADA PUMPS STANDARD P/N 3)


DESCRIPTION:
IMPELLER, 13" DIA 3V 400BHN (CANADA PUMPS STANDARD P/N 3)


DESCRIPTION:
IMPELLER, 15" DIA 3V 400BHN (CANADA PUMPS STANDARD P/N 3)


DESCRIPTION:
IMPELLER, 16" DIA 400BHN 8V W/RINGS - P/N 312727 (CANADA PUMPS STANDARD P/N 4)

OEM PART#:
P/N 312727 (CANADA PUMPS STANDARD P/N 4)


NOTES:
****NOTE: CHECK FOR LATEST REVISION BEFORE MANUFACTURING.****


DESCRIPTION:
IMPELLER, 14" DIA 3V 400BHN (CANADA PUMPS STANDARD P/N 3)


DESCRIPTION:
LINER, DRIVE SIDE 500Bhn 3-1/2" STD BORE  (CANADA PUMPS STANDARD P/N 89)

NOTES:
SAME AS 4122-J1/R3 EXCEPT BORE OF PLATE IS 3-1/2" DIAMETER


DESCRIPTION:
CASING, W/PKG BOX 280BHN  - P/N 510342/7 (CANADA PUMPS STANDARD P/N 2 & 2A)

NOTES:
NOTE: SIZE 10X12S CASING IS $15680 SELLING PRICE AND OEM $26400.00

OEM PART#:
P/N 510342/7 (CANADA PUMPS STANDARD P/N 2 & 2A)


DESCRIPTION:
CASING, W/STUFFING BOX 220BHN - P/N 510180 (CANADA PUMPS STANDARD P/N 2, 2A & 6)

OEM PART#:
P/N 510180 (CANADA PUMPS STANDARD P/N 2, 2A & 6)


MISC:
CW PUMP (CURVE 3 DS-G-141 PUMP SPEED 960RPM)

DESCRIPTION:
IMPELLER, 11-3/4" DIA W/RING  - P/N G-6401R (CANADA PUMPS STANDARD P/N 3 & 3A)

OEM PART#:
P/N G-6401R (CANADA PUMPS STANDARD P/N 3 & 3A)


DESCRIPTION:
SHAFT, 3X4DS STD ALL SEALS 1.750 DIA. (CANADA PUMPS STANDARD P/N 7 & 14A)


MISC:
CW ACID       (CURVE 3 DS-G-141 PUMP SPEED 960RPM)

DESCRIPTION:
IMPELLER, 11-1/2" DIA - P/N G-1973R (CANADA PUMPS STANDARD P/N 3 & 3A)

OEM PART#:
P/N G-1973R (CANADA PUMPS STANDARD P/N 3 & 3A)


DESCRIPTION:
SLEEVE, SHAFT INNER/PLSMA CTD,  - P/N 215414


MISC:
LATEST DESIGN SK-EW-101-JK 1983, SAME AS 9052-J1 OLD DESIGN, ONLY 1 METAL USED

DESCRIPTION:
RING, CASING, BEVEL - P/N 319109  (CANADA PUMPS STANDARD P/N 9)

NOTES:
OLD DESIGN SHOWN ON CANADA PUMP DWGS 319109-A & 9037-J1

OEM PART#:
P/N 319109  (CANADA PUMPS STANDARD P/N 9)


MISC:
USES BEARINGS SKF #2316 (170mm) RADIAL & SKF #7415BG (190mm) THRUST. NOTE: SAME STAND USED ON 10X12DS

DESCRIPTION:
PEDESTAL STAND & CAP - P/N G-1382R (CANADA PUMPS STANDARD P/N 22 & 23)

OEM PART#:
P/N G-1382R (CANADA PUMPS STANDARD P/N 22 & 23)


DESCRIPTION:
IMPELLER, 14" DIA 400BHN 3V  C/W W/ BEVEL RING - P/N 319181A (CANADA PUMPS STANDARD P/N 3, 3A & 4)

NOTES:
IMPELLER WEAR RING DWG #9007-J1 STOCK #610447. RING INCLUDED IN IMPELLER PRICE


DESCRIPTION:
IMPELLER, 13" DIA 400BHN 3V C/W W/RING - P/N 319181A (CANADA PUMPS STANDARD P/N 3, 3A, 3B & 4)

OEM PART#:
P/N 319181A (CANADA PUMPS STANDARD P/N 3, 3A, 3B & 4)


DESCRIPTION:
RING, CASING - P/N 213208 (CANADA PUMPS STANDARD P/N 9)

OEM PART#:
P/N 213208 (CANADA PUMPS STANDARD P/N 9)


DESCRIPTION:
HOUSNG, BEARING C/W GREASE ZERK  - P/N 311303

NOTES:
(INT.37010-12898 QTY.4) 9097-J1/R1PA IS FOR CAP ONLY, NOT BEARING OUTER HOUSING.


DESCRIPTION:
RING, IMPELLER WEAR - P/N 213209 440 Bhn (CANADA PUMPS STANDARD P/N 4)

OEM PART#:
P/N 213209 440 Bhn (CANADA PUMPS STANDARD P/N 4)


DESCRIPTION:
SHAFT, 4X6NH STD ALL SEALS 3.000 DIA.(CANADA PUMPS STANDARD P/N 7, 14, & 14B)


DESCRIPTION:
HOUSING, BEARING  (CANADA PUMPS STANDARD P/N 38D)

NOTES:
(QUOTE: 511037)  DRAWING CORRECTION NEEDED FOR MACHINING!!!!!


DESCRIPTION:
NUT, BRNG HSNG ADJST- P/N 212012 (CANADA PUMPS STANDARD P/N 29A)

OEM PART#:
P/N 212012 (CANADA PUMPS STANDARD P/N 29A)


DESCRIPTION:
CASING & COVER, CW - P/N 410338 (CANADA PUMPS STANDARD P/N 2 & 2A)

OEM PART#:
P/N 410338 (CANADA PUMPS STANDARD P/N 2 & 2A)


DESCRIPTION:
WEAR RING, IMPELLER , GRAY - P/N 71171-1001


MISC:
DAVID BROWN COUPLING SIZE 03-05, ASSY. P/N 41111-2-025 -MAT: STEEL/RUBBER


NOTES:
MAKE DRAWING. HAVE DRAWING FOR 5.750" VALVE #1112-J1/R1


DESCRIPTION:
VALVE, C/W POLY INSERT  - P/N 83-019-505


MISC:
3/8" RATED 0 to 1000 PSIG FEMALE/FEMALE PIPE (ROUND STOCK CONFIGURATATION) P/N 2300 SERIES,  P/N 78-819-140


MISC:
UTEX #1056-52-0129-01 MATERIAL #1056 IS NITRIL FILLED WITH TEFLON AND COTTON FIBRE. 50 SHORE "D"


MISC:
SEE 667414 FOR SAME RING IN TEFLON MATERIAL

NOTES:
**DELIVERY IS 35 DAYS  MOLD PRICE 85.00  (INT.37016-12992 QTY.100)


MISC:
Material is Manganese Bronze Alloy No. C86300 SAE 430B and ASTM 8C. Bhn 225

NOTES:
***DRAWING $75.00  MOLD: $223.00 BRONZE (CASTING PAT. 246.00)


DESCRIPTION:
BEARING, CROSSHEAD SHOE  - P/N 16-483-629


MISC:
PLUNGER MADE FROM SOLID STEEL AND HOLLOWED OUT.


MISC:
HOLD!!! DO NOT MANUFACTURE FROM DRAWING UNTIL REVIEW OF NECK AND STRENGTHENING OF ENDS. **** DO NOT USE 1/19 unless specified by customer

NOTES:
R12 IS A ONE PIECE HOLLOWED OUT PLUNGER WITH PLUG ON PRESSURE END.


DESCRIPTION:
PLATE, 18X9X1-1/2" THICK DRILLED MANGANESE


MISC:
UTEX MATERIAL #CPD-50019 HARDNESS 60 DURO

NOTES:
TOLERANCES IN MFG. IS; ALL DIMENSIONS  + - .030. PARTICAL SIZES UP TO 8MM


MISC:
4140 STEEL HT TO 400BHN VALVE RING SEATING AREA

DESCRIPTION:
SEAT, VALVE P/N 831.150.917 (ROUND, WITH O-RINGS)


NOTES:
NOTE: CUTOMER IS USING SQUARE SHAFT NOW, DRAWING #1157-J1


DESCRIPTION:
RING, CASING - P/N G-1882 (CANADA PUMPS STANDARD P/N 9)

OEM PART#:
P/N G-1882 (CANADA PUMPS STANDARD P/N 9)


DESCRIPTION:
BEARING HALF, CON ROD BIG END  - P/N 1302-2937-80


MISC:
NOTE: WEIGHT OF BALLS IS 2028LBS/45 GALLON DRUM

NOTES:
This is a kind of low Cr cast balls with hardness more than HRC47. In wet grinding process, for dia100mm balls, the wear performance of low Cr cast balls will be better than that of forged balls.


DESCRIPTION:
BEARING INSERT, PILLOW BLOCK P/N  034-94-23-1 DWG 4016-J1


NOTES:
SEAT- P/N 1002 2236,GUARD- P/N 1002 2239;VALVE & BUFFER DISCS-P/N __________(SEE DWG)


DESCRIPTION:
DELVERY VALVE COMPLETE, P/N 1002-2237-80


DESCRIPTION:
SUCTION VALVE COMPLETE, - P/N 1002-2236-80


DESCRIPTION:
VALVE SEAT, DELIVERY L.P. - P/N 1002-2237-80


DESCRIPTION:
PIN, W/WASHERS & COTTER PIN,  #1  - P/N 64714-3


DESCRIPTION:
BEARING PILLOW BLOCK CONVEYOR, SMALL DWG#2111-J1


NOTES:
****NOTE: SEE DWG.# 4024-J1 IT IS THE SAME. ****


MISC:
NUT-SAE 1020, SPINDLE-AISI 4140, ROD ASTM B21


MISC:
Drawing shows 10" long x 6-1/2" wide x 5-1/8" deep bucket with bottom radius of 2-1/2"


DESCRIPTION:
IMPELLER, 16-3/4" DIA 3V 400BHN - P/N 411744 (CANADA PUMPS STANDARD P/N 3)


DESCRIPTION:
COVER, BEARING OUTBOARD - P/N 310304 (CANADA PUMPS STANDARD P/N 25)

OEM PART#:
P/N 310304 (CANADA PUMPS STANDARD P/N 25)


DESCRIPTION:
HOUSING, BRACKET & CAP, BEARING - P/N G4316 (CANADA PUMPS STANDARD P/N 23 & 33)

NOTES:
CRS112274-INT.510959) BUFFALO PUMP SOLD FOR $1198.00. R4 Adds spiggot to fit into casing locating groove 1135-J1R4

OEM PART#:
P/N G4316 (CANADA PUMPS STANDARD P/N 23 & 33)


DESCRIPTION:
NUT, IMPELLER LH THREAD -  P/N 311034 (CANADA PUMPS STANDARD P/N 15)

OEM PART#:
P/N 311034 (CANADA PUMPS STANDARD P/N 15)


DESCRIPTION:
NUT, IMPELLER RH THREAD - P/N 311034 (CANADA PUMPS STANDARD P/N 15)


DESCRIPTION:
RING, IMPELLER WEAR 410BHN - P/N 210964 (CANADA PUMPS STANDARD P/N 3 & 3A)

NOTES:
SAME AS STOCK #610445, 610446. RING INCLUDED IN IMPELLER PRICE

OEM PART#:
P/N 210964 (CANADA PUMPS STANDARD P/N 3 & 3A)


DESCRIPTION:
COVER, HAND HOLE (CANADA PUMPS STANDARD P/N 42)


MISC:
SAME AS 610132 RING ON IMPELLER DWG #4014-J1/R4

DESCRIPTION:
RING, IMPELLER WEAR - P/N 213718 (CANADA PUMPS STANDARD P/N 3)

OEM PART#:
P/N 213718 (CANADA PUMPS STANDARD P/N 3)


MISC:
SAME AS 610945 RING ON IMPELLER DWG #4014-J1/R4

DESCRIPTION:
RING, IMPELLER WEAR 610132 - P/N 213718 (CANADA PUMPS STANDARD P/N 3)


MISC:
OLD PART NUMBER 608160-030, BEARINGS USED ON THIS SHAFT ARE 6320-ZZ &


DESCRIPTION:
BOLT, PAN HARDENED WASHERS & SQ. NUT - P/N 22334-0-02


MISC:
BEARING SIZES SKF 3211 (100mm) RADIAL, SKF 7310BG (110mm)THRUST

DESCRIPTION:
STAND, PEDESTAL & CAP  - P/N G-1055R (CANADA PUMPS STANDARD P/N 22 & 23)

OEM PART#:
P/N G-1055R (CANADA PUMPS STANDARD P/N 22 & 23)


DESCRIPTION:
COVER, BEARING OUTBOARD (CANADA PUMPS STANDARD P/N 25)


MISC:
SEE DWG #1132-J1/R2 FOR SUCTION CASING COVER


DESCRIPTION:
SLEEVE, SHAFT (CANADA PUMPS STANDARD P/N 8)


MISC:
SHAFT DWG #9027-J1 WEAR RING DWG #9012-J1

DESCRIPTION:
IMPELLER, 25" DIA., 400BHN 5V W/RING - P/N 314995 (CANADA PUMPS STANDARD P/N 3)

OEM PART#:
P/N 314995 (CANADA PUMPS STANDARD P/N 3)


DESCRIPTION:
IMPELLER, 21-5/8" DIA 5V 400BHN W/RING - P/N 314995  (CANADA PUMPS STANDARD P/N 3)

OEM PART#:
P/N 314995  (CANADA PUMPS STANDARD P/N 3)


DESCRIPTION:
IMPELLER, 22-1/2" DIA., 400BHN 5V W/RING - P/N 314995  (CANADA PUMPS STANDARD P/N 3)


DESCRIPTION:
IMPELLER, 23 " DIA., 400BHN 5V W/RING - P/N 314995  (CANADA PUMPS STANDARD P/N 3)

NOTES:
26" DIA. MAX. IMPELLER TO BE STATIC BALANCED. PATTERN IN CHINA & INDIA


DESCRIPTION:
IMPELLER, 22" DIA 5V 400BHN  W/RING - P/N 213717B  (CANADA PUMPS STANDARD P/N 3)

OEM PART#:
P/N 213717B  (CANADA PUMPS STANDARD P/N 3)


MISC:
SHAFT DWG #9027-J1 WEAR RING DWG #9012-J1/213718

DESCRIPTION:
IMPELLER, 20" DIA,M 400BHN 5V W/RING - P/N 314995  (CANADA PUMPS STANDARD P/N 3)


MISC:
SEE 9026-J1 FOR THE SHAFT STK #600859 SAME DWG AS 610875,610835 EXCEPT DIA.

DESCRIPTION:
IMPELLER, 19" DIA. W/O BACK VANES - P/N E00127E040


MISC:
312727 will make in India next time. Jan23,2017

DESCRIPTION:
IMPELLER, 20" DIA 400BHN 8V W/RINGS - P/N 312727  (CANADA PUMPS STANDARD P/N 3)

OEM PART#:
P/N 312727  (CANADA PUMPS STANDARD P/N 3)


DESCRIPTION:
IMPELLER, 19-1/2" DIA 430BHN 8V W/RINGS - P/N 312727  (CANADA PUMPS STANDARD P/N 3)


DESCRIPTION:
IMPELLER, 21-1/2" DIA 400BHN 8V W/RINGS - P/N 312727  (CANADA PUMPS STANDARD P/N 3)


DESCRIPTION:
COVER, SUCTION SIDE - P/N D02084E000-1228


DESCRIPTION:
NUT, IMPELLER - P/N 314786 ( (CANADA PUMPS STANDARD P/N 15)

OEM PART#:
P/N 314786 ( (CANADA PUMPS STANDARD P/N 15)


DESCRIPTION:
RING, SPACER CASING - P/N 319182  (CANADA PUMPS STANDARD P/N 9)

OEM PART#:
P/N 319182  (CANADA PUMPS STANDARD P/N 9)


DESCRIPTION:
SEAL CAGE SPLIT - P/N 312901  (CANADA PUMPS STANDARD P/N 14A)

OEM PART#:
P/N 312901  (CANADA PUMPS STANDARD P/N 14A)


DESCRIPTION:
HOUSING, BRACKET & CAP, BEARNG  - P/N 410465  (CANADA PUMPS STANDARD P/N 23 & 33)

OEM PART#:
P/N 410465  (CANADA PUMPS STANDARD P/N 23 & 33)


DESCRIPTION:
BUSHING, THROAT  - P/N 310939  (CANADA PUMPS STANDARD P/N 11)

OEM PART#:
P/N 310939  (CANADA PUMPS STANDARD P/N 11)


DESCRIPTION:
SHAFT, 10X12DSH STD ALL SEALS 3.50" DIA.  (CANADA PUMPS STANDARD P/N 8 & 14A)


DESCRIPTION:
SCREW, IMPELLER NUT LOCKNG  (CANADA PUMPS STANDARD P/N 16A)


MISC:
SAME AS 610824 EXCEPT FOR ADDED LABYSEAL (May7,2017.Windalco didn't use the laby seal)

DESCRIPTION:
HOUSING, BRACKET & CAP, BEARNG C/W LABYSEAL - P/N G-4316  (CANADA PUMPS STANDARD P/N 22, 23, 30E & 33)

OEM PART#:
P/N G-4316  (CANADA PUMPS STANDARD P/N 22, 23, 30E & 33)


MISC:
NITRIL 90 DUROMETER  (SEE DWG 1714B-J1 FOR ALUMINUM BRONZE MATERIAL RING)


MISC:
#2 LIME MILL 6' X 22 HARDINGE MILL 08-ME-02

DESCRIPTION:
BAR, LIFTER, HEAT RESISTANT  - P/N 165-11BNA


DESCRIPTION:
RING, CASING - P/N 660648  (CANADA PUMPS STANDARD P/N 9)

OEM PART#:
P/N 660648  (CANADA PUMPS STANDARD P/N 9)


DESCRIPTION:
IMPELLER, 25-1/2" DIA., 400BHN 5V W/RING - P/N 314995  (CANADA PUMPS STANDARD P/N 3 & 4)

OEM PART#:
P/N 314995  (CANADA PUMPS STANDARD P/N 3 & 4)


DESCRIPTION:
IMPELLER, 26" DIA., 400BHN 5V W/RING -  P/N 314995  (CANADA PUMPS STANDARD P/N 3 & 4)


DESCRIPTION:
SHAFT, FLXSL STD - P/N 312542  (CANADA PUMPS STANDARD P/N 7)

NOTES:
SHAFT USES SKF 3313 BEARINGS, #45STL=$600.00

OEM PART#:
P/N 312542  (CANADA PUMPS STANDARD P/N 7)


MISC:
SHAFT DWG #9056-J1. John quoted $560 05/15

DESCRIPTION:
SLEEVE,  6" LONG STD  (CANADA PUMPS STANDARD P/N 9)


DESCRIPTION:
SLEEVE, SHAFT - P/N G-6973  (CANADA PUMPS STANDARD P/N 8)

OEM PART#:
P/N G-6973  (CANADA PUMPS STANDARD P/N 8)


DESCRIPTION:
COVER, CASING SPLIT REMOVABLE  - P/N 412481  (CANADA PUMPS STANDARD P/N 2 & 2A)

OEM PART#:
P/N 412481  (CANADA PUMPS STANDARD P/N 2 & 2A)


DESCRIPTION:
IMPELLER, 20" DIA W/O BACK VANE - P/N E00049E0401228

NOTES:
SAME DRAWING AS STOCK NUMBERS 600875 EXCEPT DIAMETER


DESCRIPTION:
SHAFT, FLXSL + SLEEVE - P/N 312542  (CANADA PUMPS STANDARD P/N 8 & 8A)

OEM PART#:
P/N 312542  (CANADA PUMPS STANDARD P/N 8 & 8A)


DESCRIPTION:
RING, CASING - P/N SK2138-AJ - P/N 213719  (CANADA PUMPS STANDARD P/N 9)

OEM PART#:
P/N SK2138-AJ - P/N 213719  (CANADA PUMPS STANDARD P/N 9)


DESCRIPTION:
IMPELLER, 22-3/8" DIA 400BHN 8V W/RINGS - P/N 312727  (CANADA PUMPS STANDARD P/N 3 & 4)

OEM PART#:
P/N 312727  (CANADA PUMPS STANDARD P/N 3 & 4)


DESCRIPTION:
IMPELLER, 21" DIA 400BHN 8V W/RINGS - P/N 312727  (CANADA PUMPS STANDARD P/N 3 & 4)


DESCRIPTION:
HOUSING, BRACKET & CAP, BEARING - P/N 313922


DESCRIPTION:
IMPELLER, 8-1/2" DIA W/RING - P/N G-6401R  (CANADA PUMPS STANDARD P/N 3 & 3A)

OEM PART#:
P/N G-6401R  (CANADA PUMPS STANDARD P/N 3 & 3A)


MISC:
B4 FRAME SEE DWG #9025-J1 FOR THE IMPELLER STK #600875


DESCRIPTION:
RING, CASING - P/N G-3006R  (CANADA PUMPS STANDARD P/N 9)

OEM PART#:
P/N G-3006R  (CANADA PUMPS STANDARD P/N 9)


DESCRIPTION:
BOLT, GLAND SWING & NUT - P/N 311806  (CANADA PUMPS STANDARD P/N 13A & 13B)

OEM PART#:
P/N 311806  (CANADA PUMPS STANDARD P/N 13A & 13B)


DESCRIPTION:
COVER, BEARING INBOARD - P/N G-6189  (CANADA PUMPS STANDARD P/N 24)

OEM PART#:
P/N G-6189  (CANADA PUMPS STANDARD P/N 24)


DESCRIPTION:
COVER, BEARING OUTBOARD - P/N G-6190  (CANADA PUMPS STANDARD P/N 25)

OEM PART#:
P/N G-6190  (CANADA PUMPS STANDARD P/N 25)


DESCRIPTION:
FLINGER, INBOARD - P/N G-1045  (CANADA PUMPS STANDARD P/N 18A)

OEM PART#:
P/N G-1045  (CANADA PUMPS STANDARD P/N 18A)


DESCRIPTION:
NUT, IMPELLER - P/N G-1971R2  (CANADA PUMPS STANDARD P/N 15)

OEM PART#:
P/N G-1971R2  (CANADA PUMPS STANDARD P/N 15)


DESCRIPTION:
SCREW, FOR IMPELLER - P/N G-6402A  (CANADA PUMPS STANDARD P/N 15A)

NOTES:
(37031-QTY.4)**PRICES SOLD TO WINDALCO $10.00.**

OEM PART#:
P/N G-6402A  (CANADA PUMPS STANDARD P/N 15A)


DESCRIPTION:
KEY, IMPELLER (CANADA PUMPS STANDARD P/N 17 & 17B)


DESCRIPTION:
RING, LANTERN SEAL CAGE  -  P/N 312899  (CANADA PUMPS STANDARD P/N 14)

OEM PART#:
P/N 312899  (CANADA PUMPS STANDARD P/N 14)


DESCRIPTION:
IMPELLER, 21-1/2" DIA. 400Bhn  3V W/RING - P/N  (CANADA PUMPS STANDARD P/N 3, 3A & 4)

OEM PART#:
P/N  (CANADA PUMPS STANDARD P/N 3, 3A & 4)


DESCRIPTION:
BUSHING, THROAT  - P/N G-7189  (CANADA PUMPS STANDARD P/N 11)

OEM PART#:
P/N G-7189  (CANADA PUMPS STANDARD P/N 11)


DESCRIPTION:
IMPELLER, 9" DIA W/RING - P/N G-6401R  (CANADA PUMPS STANDARD P/N 3, 3A & 4)

OEM PART#:
P/N G-6401R  (CANADA PUMPS STANDARD P/N 3, 3A & 4)


DESCRIPTION:
IMPELLER, 9-1/2" DIA 400BHN W/RING - P/N G-6401R  (CANADA PUMPS STANDARD P/N 3, 3A & 4)

NOTES:
(37031 QTY. 2) **PRICE SOLD TO WINDALCO $987.25**  INVOICE CAME TO US.


DESCRIPTION:
IMPELLER, 9-3/4" DIA 400BHN W/RING  - P/N G-6401R (CANADA PUMPS STANDARD P/N 3, 3A & 4)

OEM PART#:
P/N G-6401R (CANADA PUMPS STANDARD P/N 3, 3A & 4)


DESCRIPTION:
IMPELLER, 10" DIA W/RING - P/N G-6401R (CANADA PUMPS STANDARD P/N 3, 3A & 4)


DESCRIPTION:
IMPELLER, 10-3/8" DIA W/RING - P/N G-6401R (CANADA PUMPS STANDARD P/N 3, 3A & 4)


DESCRIPTION:
IMPELLER, 11-1/2" DIA W/RING  - P/N G-6401R (CANADA PUMPS STANDARD P/N 3, 3A & 4)


DESCRIPTION:
FLINGER, OUTBOARD - P/N G-1051 (CANADA PUMPS STANDARD P/N 18B)

OEM PART#:
P/N G-1051 (CANADA PUMPS STANDARD P/N 18B)


DESCRIPTION:
RING, IMPELLER WEAR - P/N G-5808 (CANADA PUMPS STANDARD P/N 3, 3A & 4)

OEM PART#:
P/N G-5808 (CANADA PUMPS STANDARD P/N 3, 3A & 4)


DESCRIPTION:
CASING, C/W  - P/N 410292-3 (CANADA PMUPS STANDARD P/N 2)

OEM PART#:
P/N 410292-3 (CANADA PMUPS STANDARD P/N 2)


DESCRIPTION:
RING, CASING - P/N G-3006R (CANADA PMUPS STANDARD P/N 9)

OEM PART#:
P/N G-3006R (CANADA PMUPS STANDARD P/N 9)


DESCRIPTION:
BOLT, GLAND SWING & NUT - P/N 310349  (CANADA PMUPS STANDARD P/N 13A & 13B)

OEM PART#:
P/N 310349  (CANADA PMUPS STANDARD P/N 13A & 13B)


DESCRIPTION:
GLAND, SPLIT - P/N 310501  (CANADA PMUPS STANDARD P/N 12A)

OEM PART#:
P/N 310501  (CANADA PMUPS STANDARD P/N 12A)


DESCRIPTION:
LANTERN RING, SEAL CAGE  - P/N 312899  (CANADA PMUPS STANDARD P/N 14)

OEM PART#:
P/N 312899  (CANADA PMUPS STANDARD P/N 14)


DESCRIPTION:
SLEEVE, SHAFT - 43HRC  (CANADA PMUPS STANDARD P/N 8)


DESCRIPTION:
BUSHING, THROAT  - P/N G-7189  (CANADA PMUPS STANDARD P/N 11)

OEM PART#:
P/N G-7189  (CANADA PMUPS STANDARD P/N 11)


DESCRIPTION:
IMPELLER, 11-1/2" DIA - P/N 310402  (CANADA PMUPS STANDARD P/N 3 &3A)

OEM PART#:
P/N 310402  (CANADA PMUPS STANDARD P/N 3 &3A)


DESCRIPTION:
NUT, IMPELLER - P/N G-1971R2  (CANADA PMUPS STANDARD P/N 15)

OEM PART#:
P/N G-1971R2  (CANADA PMUPS STANDARD P/N 15)


DESCRIPTION:
SCREW, IMPELLER NUT LOCKING - P/N G-6402A  (CANADA PMUPS STANDARD P/N 16A)

OEM PART#:
P/N G-6402A  (CANADA PMUPS STANDARD P/N 16A)


DESCRIPTION:
KEY, IMPELLER  (CANADA PMUPS STANDARD P/N 17 & 17B)


DESCRIPTION:
THROAT BUSHING - P/N 312469  (CANADA PMUPS STANDARD P/N 11)

OEM PART#:
P/N 312469  (CANADA PMUPS STANDARD P/N 11)


DESCRIPTION:
IMPELLER, 10-1/2" DIA  - P/N G-1973R  (CANADA PMUPS STANDARD P/N 3)

OEM PART#:
P/N G-1973R  (CANADA PMUPS STANDARD P/N 3)


DESCRIPTION:
SHAFT, FLXSL 10X12DS  (CANADA PMUPS STANDARD P/N 7)


DESCRIPTION:
SLEEVE, SHAFT - P/N 319341 (CANADA PUMPS STANDARD P/N 8)

OEM PART#:
P/N 319341 (CANADA PUMPS STANDARD P/N 8)


MISC:
SLEEVE DWG #9043-J1 IMPELLER DWG #4014-J1/R4

DESCRIPTION:
SHAFT, FLXSL + SLEEVE RH - P/N 319339 (CANADA PUMPS STANDARD P/N 7 & 7C)

OEM PART#:
P/N 319339 (CANADA PUMPS STANDARD P/N 7 & 7C)


MISC:
SEE DWG #9029-J1 STK #610863 FOR SHORT SLEEVE (7.5") & SHAFT DWG#9028-J1 STK #610861

DESCRIPTION:
SLEEVE, SHAFT STD LNGTH 10-1/8" - P/N 312543 (CANADA PUMPS STANDARD 7)


DESCRIPTION:
IMPELLER, 8-3/8" DIA. 2ND STAGE CW  - P/N G-7457


DESCRIPTION:
IMPELLER, 8-3/8" DIA. 3RD STAGE CW  - P/N G-7457


DESCRIPTION:
IMPELLER, 8-3/8" DIA. 4TH STAGE CW  - P/N G-7457


DESCRIPTION:
CASING, W/STUFFING BOX DWG#411335  (CANADA PMUPS STANDARD P/N 2, 2A & 6)


DESCRIPTION:
RING, WEAR CASING - P/N 312517  (CANADA PMUPS STANDARD P/N 9)

OEM PART#:
P/N 312517  (CANADA PMUPS STANDARD P/N 9)


DESCRIPTION:
BOLT,CLAMPING BAR PN 26-117-194-002 (REPLACES P/N 4010-0)


DESCRIPTION:
STAND, PEDESTAL & CAP (CANADA PUMPS STANDARD P/N 22 & 23)


DESCRIPTION:
COVER, BEARING OUTBOARD - P/N G-6337R  (CANADA PMUPS STANDARD P/N 25)

OEM PART#:
P/N G-6337R  (CANADA PMUPS STANDARD P/N 25)


DESCRIPTION:
FLINGER, INBOARD - P/N G-1223  (CANADA PMUPS STANDARD P/N 18A)

OEM PART#:
P/N G-1223  (CANADA PMUPS STANDARD P/N 18A)


DESCRIPTION:
FLINGER, OUTBOARD - P/N G-1249  (CANADA PMUPS STANDARD P/N 18B)

OEM PART#:
P/N G-1249  (CANADA PMUPS STANDARD P/N 18B)


DESCRIPTION:
GLAND, SPLIT - P/N 312308-A  (CANADA PMUPS STANDARD P/N 12A)

OEM PART#:
P/N 312308-A  (CANADA PMUPS STANDARD P/N 12A)


DESCRIPTION:
NUT, IMPELLER - P/N G-1219-2  (CANADA PMUPS STANDARD P/N 15)

OEM PART#:
P/N G-1219-2  (CANADA PMUPS STANDARD P/N 15)


DESCRIPTION:
NUT, IMPELLER NUT L/SCREW - P/N G-5520  (CANADA PMUPS STANDARD P/N 15 & 15A)

OEM PART#:
P/N G-5520  (CANADA PMUPS STANDARD P/N 15 & 15A)


DESCRIPTION:
RING, KEY PROTECTING - P/N 312125  (CANADA PMUPS STANDARD P/N 48)

OEM PART#:
P/N 312125  (CANADA PMUPS STANDARD P/N 48)


DESCRIPTION:
SLEEVE, SHAFT STD LENGTH 6" - P/N 312129  (CANADA PMUPS STANDARD P/N 8)

OEM PART#:
P/N 312129  (CANADA PMUPS STANDARD P/N 8)


DESCRIPTION:
BUSHING, THROAT - G-3004  (CANADA PMUPS STANDARD P/N 11)


DESCRIPTION:
IMPELLER, 11-3/4" DIA 400BHN 3V - P/N 319181A  (CANADA PMUPS STANDARD P/N 3 & 3A)

OEM PART#:
P/N 319181A  (CANADA PMUPS STANDARD P/N 3 & 3A)


DESCRIPTION:
IMPELLER, 12-1/2" DIA 400BHN 3V C/W BVL RNG - P/N 319181A (CANADA PMUPS STANDARD P/N 3 & 3A)


DESCRIPTION:
RING, IMPELLER WEAR - P/N 312728 440bhn (CANADA PMUPS STANDARD P/N 4)

OEM PART#:
P/N 312728 440bhn (CANADA PMUPS STANDARD P/N 4)


MISC:
BOLT ON TYPE SPECIAL FOR CEFILAC SEAL USE.

DESCRIPTION:
BOX, STUFFING FOR CEFILAC SEAL SERIES - P/N SK-EW-111-JK


DESCRIPTION:
BOLT & NUT, GLAND SWING TYPE  - P/N G-1254 (CANADA PMUPS STANDARD P/N 13A & 13B)

OEM PART#:
P/N G-1254 (CANADA PMUPS STANDARD P/N 13A & 13B)


DESCRIPTION:
FLINGER, INBOARD - P/N G-1250 (CANADA PMUPS STANDARD P/N 18A)

OEM PART#:
P/N G-1250 (CANADA PMUPS STANDARD P/N 18A)


DESCRIPTION:
NUT, IMPELLER RH - P/N G-2090 (CANADA PMUPS STANDARD P/N 15)

OEM PART#:
P/N G-2090 (CANADA PMUPS STANDARD P/N 15)


DESCRIPTION:
NUT, IMPELLER L/SCREW RH  - P/N G-5520 (CANADA PMUPS STANDARD P/N 15 & 15A)

OEM PART#:
P/N G-5520 (CANADA PMUPS STANDARD P/N 15 & 15A)


MISC:
5/8" x 5/8" x 5-1/2" long mild steel material

DESCRIPTION:
KEY, IMPELLER (CANADA PMUPS STANDARD P/N 17 & 17B)


DESCRIPTION:
LANTERN RING, SPLIT, SEAL CAGE- P/N 313103 (CANADA PMUPS STANDARD P/N 14A)

OEM PART#:
P/N 313103 (CANADA PMUPS STANDARD P/N 14A)


DESCRIPTION:
BUSHING, THROAT   - P/N G-3025 (CANADA PMUPS STANDARD P/N 11)

OEM PART#:
P/N G-3025 (CANADA PMUPS STANDARD P/N 11)


DESCRIPTION:
IMPELLER, 14-1/4" DIA 3V W/RING  - P/N G-6831 ((CANADA PMUPS STANDARD P/N 3, 3A & 4)

OEM PART#:
P/N G-6831 ((CANADA PMUPS STANDARD P/N 3, 3A & 4)


DESCRIPTION:
IMPELLER, 15-1/4" DIA 3V W/RING  - P/N G-6831 (CANADA PMUPS STANDARD P/N 3, 3A & 4)

OEM PART#:
P/N G-6831 (CANADA PMUPS STANDARD P/N 3, 3A & 4)


DESCRIPTION:
IMPELLER, 16" DIA 3V W/RING  - P/N G-6831 (CANADA PMUPS STANDARD P/N 3, 3A & 4)


DESCRIPTION:
IMPELLER, 16-1/2" DIA 3V W/RINGS - P/N G-6831 (CANADA PMUPS STANDARD P/N 3, 3A & 4)


DESCRIPTION:
RING, IMPELLER  - P/N G-6832 (CANADA PMUPS STANDARD P/N 4)

OEM PART#:
P/N G-6832 (CANADA PMUPS STANDARD P/N 4)


DESCRIPTION:
ASSEMBLY DRAWING, CANADA PUMPS 4X6 DSH - P/N 464926


MISC:
SHOWS PARTS AND ASSY VIEW OF DSH PUMPS. READ WITH X-131 FOR PART NAMES ATTACHED TO THIS DWG.

DESCRIPTION:
DSH CUTVIEW/PARTS LIST DRAWING - P/N 660648


DESCRIPTION:
RING, CASING - P/N G-1882 OLD STYLE (CANADA PMUPS STANDARD P/N 9)

OEM PART#:
P/N G-1882 OLD STYLE (CANADA PMUPS STANDARD P/N 9)


DESCRIPTION:
SLEEVE,  BEARING SPACER  -  P/N 310908 (CANADA PMUPS STANDARD P/N 41)

OEM PART#:
P/N 310908 (CANADA PMUPS STANDARD P/N 41)


DESCRIPTION:
COVER, BEARING OUTBOARD - P/N G-6337 (CANADA PMUPS STANDARD P/N 25)

OEM PART#:
P/N G-6337 (CANADA PMUPS STANDARD P/N 25)


DESCRIPTION:
FLINGER, INBOARD - P/N 310910 (CANADA PMUPS STANDARD P/N 18A)

OEM PART#:
P/N 310910 (CANADA PMUPS STANDARD P/N 18A)


DESCRIPTION:
FLINGER, OUTBOARD -  P/N 210592 (CANADA PMUPS STANDARD P/N 18B)

OEM PART#:
P/N 210592 (CANADA PMUPS STANDARD P/N 18B)


DESCRIPTION:
NUT, IMPELLER L/SCREW  - P/N 315130 (CANADA PMUPS STANDARD P/N 16A)

OEM PART#:
P/N 315130 (CANADA PMUPS STANDARD P/N 16A)


DESCRIPTION:
KEY, IMPELLER (CANADA PMUPS STANDARD P/N 3 & 3A)


DESCRIPTION:
BOLT & NUT, GLAND SWING  - P/N 310340 (CANADA PMUPS STANDARD P/N 13A &13B)

OEM PART#:
P/N 310340 (CANADA PMUPS STANDARD P/N 13A &13B)


DESCRIPTION:
BUSHING/SLEEVE, INTERSTAGE DIAHPRAGM 375-400BHN  - P/N 311343


DESCRIPTION:
BUSHING, INTERSTAGE DIAPHRAGM - P/N 311342


DESCRIPTION:
IMPELLER, 7-1/2" DIA 400BHN 4V CW - P/N 311334


DESCRIPTION:
IMPELLER, 7-1/2" DIA 400BHN 4V CCW - P/N 311334


DESCRIPTION:
IMPELLER, 9" DIA 400BHN 4V C/W - P/N 311334

NOTES:
JULY/11 SOLD FOR $493.00, ** PATTERN PRICE 486.00**


DESCRIPTION:
GLAND, SPLIT (CANADA PMUPS STANDARD P/N 12 & 12A)


DESCRIPTION:
KEY, IMPELLER (CANADA PMUPS STANDARD P/N 17B)


DESCRIPTION:
COVER, BEARING INBOARD (CANADA PMUPS STANDARD P/N 24)


DESCRIPTION:
FRAME FOOT (CANADA PMUPS STANDARD P/N 252)


DESCRIPTION:
COVER, HAND HOLE SUCTION - P/N G-2919 (CANADA PMUPS STANDARD P/N 42A)

OEM PART#:
P/N G-2919 (CANADA PMUPS STANDARD P/N 42A)


DESCRIPTION:
BEARING SEAL PLATE INBOARD   - P/N G-6161


DESCRIPTION:
BEARING SEAL PLATE OUTBOARD - P/N G-6160


DESCRIPTION:
IMPELLER, 15-3/4" DIA W/RINGS - P/N G-4369


DESCRIPTION:
IMPELLER, 17-3/4" DIA W/RINGS - P/N G-4369


DESCRIPTION:
IMPELLER, 16-1/2" DIA W/RINGS - P/N G-4369


DESCRIPTION:
IMPELLER, 16-1/2" DIA., 400Bhn 3V W/RNG  - P/N 314992 (CANADA PMUPS STANDARD P/N 3, 3A & 4)

OEM PART#:
P/N 314992 (CANADA PMUPS STANDARD P/N 3, 3A & 4)


DESCRIPTION:
IMPELLER, 18" DIA., 400Bhn 3V W/RINGS  - P/N 314992 (CANADA PMUPS STANDARD P/N 3, 3A & 4)


DESCRIPTION:
IMPELLER, 20" DIA., 400Bhn 3V W/RING - P/N 314992 (CANADA PMUPS STANDARD P/N 3, 3A & 4)


DESCRIPTION:
IMPELLER, 23" DIA., 400Bhn 3V W/RING  - P/N 314992 (CANADA PMUPS STANDARD P/N 3, 3A & 4)


DESCRIPTION:
IMPELLER, 16-1/2" DIA., 400Bhn 3V W/RINGS  - P/N 314992 (CANADA PMUPS STANDARD P/N 3, 3A & 4)


DESCRIPTION:
IMPELLER, 19-1/2" DIA 400BHN 3V W/RINGS - 314992 (CANADA PMUPS STANDARD P/N 3, 3A & 4)


DESCRIPTION:
IMPELLER, 15-1/2" DIA 400BHN 3V W/RINGS (CANADA PMUPS STANDARD P/N 3, 3A & 4)


DESCRIPTION:
RING, IMPELLER WEAR - P/N (CANADA PMUPS STANDARD P/N 4)


DESCRIPTION:
RING, SPACER - P/N 214701 HARD CHROME (CANADA PMUPS STANDARD P/N 121)

OEM PART#:
P/N 214701 HARD CHROME (CANADA PMUPS STANDARD P/N 121)


DESCRIPTION:
SHAFT, FLXSL 10X12-22.5 S (CANADA PUMPS STANDARD P/N 7)


DESCRIPTION:
SHAFT, FLXSL STD - P/N 312542 (CANADA PUMPS STANDARD P/N 7)

OEM PART#:
P/N 312542 (CANADA PUMPS STANDARD P/N 7)


DESCRIPTION:
COVER, BEARING INBOARD - P/N 312537 (CANADA PUMPS STANDARD P/N 24)

OEM PART#:
P/N 312537 (CANADA PUMPS STANDARD P/N 24)


DESCRIPTION:
COLLAR, BEARING -  P/N 311035 (CANADA PUMPS STANDARD P/N 35B)

OEM PART#:
P/N 311035 (CANADA PUMPS STANDARD P/N 35B)


DESCRIPTION:
FLINGER, OUTBOARD - P/N 312540 (CANADA PUMPS STANDARD P/N 18B)

OEM PART#:
P/N 312540 (CANADA PUMPS STANDARD P/N 18B)


DESCRIPTION:
FLINGER, INBOARD - P/N 310020 (CANADA PUMPS STANDARD P/N 18A)

OEM PART#:
P/N 310020 (CANADA PUMPS STANDARD P/N 18A)


DESCRIPTION:
SEAL CAGE SPLIT  - P/N 312902 (CANADA PUMPS STANDARD P/N 14A)

OEM PART#:
P/N 312902 (CANADA PUMPS STANDARD P/N 14A)


DESCRIPTION:
THROAT BUSHING - P/N 316549 (CANADA PUMPS STANDARD P/N 11)

OEM PART#:
P/N 316549 (CANADA PUMPS STANDARD P/N 11)


DESCRIPTION:
KEY, IMPELLER (CANADA PUMPS STANDARD P/N 17B)


DESCRIPTION:
IMPELLER, 18" DIA 400BHN 8V W/ RINGS - P/N 312727 (CANADA PUMPS STANDARD P/N 4)


DESCRIPTION:
IMPELLER, 18-3/8" DIA 400BHN 8V W/RINGS - P/N 312727 (CANADA PUMPS STANDARD P/N 4)


DESCRIPTION:
IMPELLER, 18-3/4" DIA 400BHN 8V W/RINGS - P/N 312727 (CANADA PUMPS STANDARD P/N 4)


DESCRIPTION:
SHAFT, & PLASMAS SLV - P/N 312542 (CANADA PUMPS STANDARD P/N 9)

OEM PART#:
P/N 312542 (CANADA PUMPS STANDARD P/N 9)


DESCRIPTION:
DRAWING OF SHAFTS USED AT WINDALCO PLANTS - A-OE-724-AJ-1


DESCRIPTION:
SEAL CAGE SPLIT  - P/N 314313 (CANADA PUMPS STANDARD P/N 14A)

OEM PART#:
P/N 314313 (CANADA PUMPS STANDARD P/N 14A)


DESCRIPTION:
THROAT BUSHING - P/N 314065 (CANADA PUMPS STANDARD P/N 11)

OEM PART#:
P/N 314065 (CANADA PUMPS STANDARD P/N 11)


MISC:
SHAFT DWG #9027-J1, IMPELLER DWG #4014-J1/R4

DESCRIPTION:
NUT, IMPELLER RH - P/N 314061 (CANADA PUMPS STANDARD P/N 15)

OEM PART#:
P/N 314061 (CANADA PUMPS STANDARD P/N 15)


DESCRIPTION:
RINGS DWG, WEAR & CLEARANCE FOR WINDALCO PUMPS - A-OE-724-AJ-2


MISC:
SHAFT DWG #9027-J1  IMPELLER DWG #4014-J1/R4

DESCRIPTION:
NUT, IMPELLER LH - P/N 314061 (CANADA PUMPS STANDARD P/N 15)


DESCRIPTION:
SHAFTS DWG, ALL SIZES USED AT WINDALCO - A-OE-724-AJ-3


MISC:
SHAFT DWG #9027-J1,WEAR RING DWG #9012-J1

DESCRIPTION:
IMPELLER, 17-5/8" DIA., 400BHN 5V W/RING - P/N 314995 (CANADA PUMPS STANDARD P/N 3 & 4)


MISC:
SHAFT DWG #9027-J1, WEAR RING DWG #9012-J1

DESCRIPTION:
IMPELLER, 18-5/8" DIA., 400BHN 5V W/RING - P/N 314995 (CANADA PUMPS STANDARD P/N 3 & 4)


DESCRIPTION:
IMPELLER, 19-3/4" DIA. 400BHN 5V W/RING - P/N 314995 (CANADA PUMPS STANDARD P/N 3 & 4)


DESCRIPTION:
IMPELLER, 21" DIA., 400BHN 5V W/RING - P/N 314995 (CANADA PUMPS STANDARD P/N 3 & 4)


DESCRIPTION:
IMPELLER, 21-1/4" DIA., 400BHN 5V W/RING - P/N 314995 (CANADA PUMPS STANDARD P/N 3 & 4)


DESCRIPTION:
IMPELLER, 19" DIA., 400BHN 5V W/RING - P/N 314995 (CANADA PUMPS STANDARD P/N 3 & 4)


DESCRIPTION:
RING, WEAR IMPELLER - P/N 314996 (CANADA PUMPS STANDARD P/N 4)

OEM PART#:
P/N 314996 (CANADA PUMPS STANDARD P/N 4)


MISC:
SUPERSEDES DWG #660460 DATED 1968 INTMPE DWG #9061-J1

DESCRIPTION:
DRAWING OF PARTS LIST & SECTIONAL  - P/N 1992


DESCRIPTION:
RING, CASING - BEVEL - P/N 211452 (CANADA PMUPS STANDARD P/N 9)

OEM PART#:
P/N 211452 (CANADA PMUPS STANDARD P/N 9)


DESCRIPTION:
RING, IMPELLER WEAR  - P/N 212850 (CANADA PMUPS STANDARD P/N 4)

OEM PART#:
P/N 212850 (CANADA PMUPS STANDARD P/N 4)


DESCRIPTION:
IMPELLER, 9" DIA W/RING-BEVEL - P/N 262146 (CANADA PMUPS STANDARD P/N 3, 3A & 4)

OEM PART#:
P/N 262146 (CANADA PMUPS STANDARD P/N 3, 3A & 4)


DESCRIPTION:
IMPELLER, 9-1/4" DIA 400BHN W/RING-BEVEL - P/N 262146 (CANADA PMUPS STANDARD P/N 3, 3A & 4)


DESCRIPTION:
IMPELLER, 9-1/2" DIA 400BHN W/RING-BEVEL - P/N 262146 (CANADA PMUPS STANDARD P/N 3, 3A & 4)


DESCRIPTION:
IMPELLER, 9-3/4" DIA 400BHN W/RING-BEVEL - P/N 262146 (CANADA PMUPS STANDARD P/N 3, 3A & 4)


DESCRIPTION:
IMPELLER, 10" DIA W/RING - P/N 262146 (CANADA PMUPS STANDARD P/N 3, 3A & 4)


DESCRIPTION:
IMPELLER, 10-3/8" DIA W/RING-BEVEL - P/N 262146 (CANADA PMUPS STANDARD P/N 3, 3A & 4)


DESCRIPTION:
IMPELLER, 10-3/4" DIA W/RING-BEVEL - P/N 262146 (CANADA PMUPS STANDARD P/N 3, 3A & 4)


DESCRIPTION:
IMPELLER, 11-3/4" DIA W/RING-BEVEL - P/N 262146 (CANADA PMUPS STANDARD P/N 3, 3A & 4)


DESCRIPTION:
COVER, BEARING OUTBOARD (CANADA PMUPS STANDARD P/N 25)


DESCRIPTION:
RING, IMPELLER WEAR - P/N 311992 (CANADA PMUPS STANDARD P/N 4)

OEM PART#:
P/N 311992 (CANADA PMUPS STANDARD P/N 4)


DESCRIPTION:
SHAFT - P/N 319343 (CANADA PMUPS STANDARD P/N 7)

OEM PART#:
P/N 319343 (CANADA PMUPS STANDARD P/N 7)


DESCRIPTION:
CASING, STFNG BOX, MDFD, 10X12S - P/N 412214-5 (CANADA STANDARD P/N 2, 2A & 6)

OEM PART#:
P/N 412214-5 (CANADA STANDARD P/N 2, 2A & 6)


DESCRIPTION:
IMPELLER, 21" DIA 400BHN 8V W/RINGS - P/N 312727 (CANADA PUMPS STANDARD P/N 3& 4)

OEM PART#:
P/N 312727 (CANADA PUMPS STANDARD P/N 3& 4)


DESCRIPTION:
STUD & NUT, GLAND (CANADA PMUPS STANDARD P/N 13 & 13B)


DESCRIPTION:
RING, CASING WEAR G-3006R (CANADA PMUPS STANDARD P/N 9)


DESCRIPTION:
IMPELLER, 9" DIA 400BHN 4V CCW - P/N 311334 (CANADA PMUPS STANDARD P/N 3 & 3A)

NOTES:
SEE DWG #9107-J1 FOR CW IMPELLER, 4 VANES

OEM PART#:
P/N 311334 (CANADA PMUPS STANDARD P/N 3 & 3A)


DESCRIPTION:
CASING & COVER - P/N 410338 (CANADA PMUPS STANDARD P/N 2 & 2A)

OEM PART#:
P/N 410338 (CANADA PMUPS STANDARD P/N 2 & 2A)


DESCRIPTION:
BOLT, 3/4" C/WITH FLAT WASHER - P/N K25-8305GR5


DESCRIPTION:
MANHOLE PLATE, W=450, L=435, C/W REINFORCEMENT #K35-4324-102


DESCRIPTION:
GASKET, CASING (CANADA PMUPS STANDARD P/N  65)


DESCRIPTION:
FRAME, BEARING - (CANADA PMUPS STANDARD P/N 22)


DESCRIPTION:
COVER, BEARING OUTBOARD. 400BHN - P/N G-6190 (CANADA PMUPS STANDARD P/N 25)

OEM PART#:
P/N G-6190 (CANADA PMUPS STANDARD P/N 25)


DESCRIPTION:
RING, CASING WEAR - 213230 (CANADA PMUPS STANDARD P/N 9)


NOTES:
SAME DRAWING AS STOCK NUMBER 600835 EXCEPT DIAMETER


MISC:
SHAFT DWG#9027-J1, WEAR RING DWG #9012-J1

DESCRIPTION:
IMPELLER, 26 1/2" DIA., 400BHN 5V W/RING - P/N 341995 (CANADA PUMPS STANDARD P/N 4)

OEM PART#:
P/N 341995 (CANADA PUMPS STANDARD P/N 4)


MISC:
B3 FRAME 1079 GPM @ 85'TDH, 1000RPM SG 1.36 TEMP 146 DEG.F USING 60HP MOTOR

DESCRIPTION:
CLAMP, BEARING HSG FRAME B3 - P/N C00813E000-2201


MISC:
S1XCR-60TC/SC/EP/316SS3, ONE PIECE SLEEVE, PRESSED IN FACES FOR 10X12S TO REPLACE 611307 SLRY DYNMICS


DESCRIPTION:
INTERMEDIATE SHAFT, LENGTH 103", DIAMETER 5-15/16". KEY WAYS AT BOTH ENDS, 1-1/2" X12"


DESCRIPTION:
IMPELLER, 20-1/4" DIA W/O BACK VANES - P/N E00127E012-1228


DESCRIPTION:
IMPELLER, 20-1/2" DIA W/O BACK VANES - P/N E00127E012-1228


MISC:
M.A.W.P. 1360 PSIG @ 200 DEGREE F, M.D.M.T 20 DEGREE F @ 1360 PSIG, CALCULATED VOLUME 736" CUBE


DESCRIPTION:
STABILIZER, SUCTION 25 GLN 110PSIG @ 200F


MISC:
AS 568-472, B3 FRAME 1079GPM @ 85'TDH SG1.36, 1000RPM PUMP USING 60HP,


MISC:
AS568-468, B3 FRAME 1079GPM @ 85'TDH SG1.36, 1000RPM PUMP USING 60HP,


MISC:
AS568-462, B2 FRAME 800GPM @ 100'TDH SG1.55, 1000RPM PUMP USING 60HP,


MISC:
B2 FRAME 800GPM @ 140'TDH SG1.3, 1500RPM PUMP USING 125HP,


MISC:
AS 568-460, B2 FRAME 800GPM @ 100'TDH SG1.55, 1000RPM PUMP USING 60HP,


DESCRIPTION:
COVER, STUFFING BOX - P/N D00213E0001055


MISC:
USES BEARINGS SKF #21320 ( 215mm) RADIAL & TIMKEN TDO-93400 (112mm) THRUST


DESCRIPTION:
STUDS, GLAND (CANADA PMUPS STANDARD P/N 13)


DESCRIPTION:
PLATE, BEARING - P/N 212013 (CANADA PMUPS STANDARD P/N 30A)

OEM PART#:
P/N 212013 (CANADA PMUPS STANDARD P/N 30A)


DESCRIPTION:
IMPELLER, 17" DIA. 3V 400BHN - P/N 411744 (CANADA PMUPS STANDARD P/N 3)

OEM PART#:
P/N 411744 (CANADA PMUPS STANDARD P/N 3)


DESCRIPTION:
IMPELLER, 11-3/4"DIA 3V 400BHN - P/N 411744 (CANADA PMUPS STANDARD P/N 3)


DESCRIPTION:
IMPELLER, 22-1/2" DIA 400BHN 8V W/RINGS - P/N 312727 (CANADA PMUPS STANDARD P/N 3 & 4)

OEM PART#:
P/N 312727 (CANADA PMUPS STANDARD P/N 3 & 4)


DESCRIPTION:
IMPELLER, 20-1/2" DIA., 400BHN W/RING - P/N 213717B (CANADA PMUPS STANDARD P/N 3 & 4)

OEM PART#:
P/N 213717B (CANADA PMUPS STANDARD P/N 3 & 4)


DESCRIPTION:
CASING, W/STUFFING BOX -P/N 511163 (CANADA PMUPS STANDARD P/N 2, 2A & 6)

OEM PART#:
P/N 511163 (CANADA PMUPS STANDARD P/N 2, 2A & 6)


DESCRIPTION:
LUBE SUPPLY LINE PRESSURE GAGE KIT - P/N 04-121668


DESCRIPTION:
RING, SPACER - P/N 211453 (CANADA PMUPS STANDARD P/N 121)

OEM PART#:
P/N 211453 (CANADA PMUPS STANDARD P/N 121)


DESCRIPTION:
SCREW, LOCKING - (CANADA PMUPS STANDARD P/N 15A)


DESCRIPTION:
BEARING BALL, RADIAL (CANADA PMUPS STANDARD P/N 26)


MISC:
B4 POWER FRAME, TIMKEN#23032CC O.D. =  9.4488/240mm      I.D. = 6.2992/160mm SPHERICAL ROLLER BEARING


NOTES:
CUP AND CONE SET, 2 REQUIRED, ONE FOR EACH END OF THE CRANK SHAFT.


DESCRIPTION:
PLATE, HEAD 27-7/8" long. 165-65K 8FT DIA. BALL MILL


DESCRIPTION:
BAR, LIFTER 165-110 BNA, (13 USED EACH TIME)


DESCRIPTION:
BAR, LIFTER, SHELL, 165-125RNA 840MM LONG


MISC:
OLD CROFT GB FOOT PRINT = 940mm x 635mm CENTER TO CENTER FOOT PRINT PATTERN. NEW = 950mm x 475mm

DESCRIPTION:
REDUCER,  GEAR BOX MPGB450, RATIO 7.48:1


DESCRIPTION:
TUBE, SEAMLESS 22' L X 1.98/2.00 WT 12BWG(2.77MM)


MISC:
FLEX BUSHING NEOPRENE INSERT FOR DRIVE SHAFT. LORD MFG #BJ-1205


DESCRIPTION:
NOZZLE, SPIRAL TARGET CROSS FLOW #368-3738-084


DESCRIPTION:
DRIFT ELIMINATOR 6ft Long X 10in High X 6in Wide #D25142

NOTES:
BRENTWOOD COOLING TOWER PARTS AWCT09701, #CF150MAX155.25X12X72-RPVC-DG


DESCRIPTION:
CROSS BAR, 1.625 X 1 X 4' LONG (REPLACES WOOD)


MISC:
ALPHA III CROSS FLOW SPLASH GRID. 12 GUAGE WIRE HANGER PVC COATED.


MISC:
CTD-42FR-8. FRP CASING PANELS, 4.2 Corrugated. CUT TO SIZES 46.5" X 19.5" for INLET VANES ON OUTSIDE TOWER 9166-J1

DESCRIPTION:
PANEL, SIDE WALL CRGTD, 12 OZ. 42" X 150"

NOTES:
GLASTEEL MFG. 42L12SL0430015000, 4.2 CORIGATED 12OZ SBS LT GRAY 42 X 150


DESCRIPTION:
CORNER MOLD, L SHAPE 6" X 6" X 96" FIRE RETARDENT

NOTES:
MFG. GLASTEEL CNR ROLL GR 12OZ SBS GRAY 12 X 96 #CRG12SNG129909602


DESCRIPTION:
CLOSURE STRIP, BLK/NPRN 4.2 CRGTD, BOX 300' LONG


MISC:
SPECIAL LUBRICANT Lomu + 410SS TRIM PTFE/VITON

DESCRIPTION:
PLUG VALVE, 6" ASA 125# C.I. PLG, WRNCH, LoMu LUBE

NOTES:
FACE TO FACE = 267MM WITH 279MM DIA. FLANGES


MISC:
VALVE IS A216WCB BODY, SPECIAL LUBRICANT Lomu + 410SS TRIM PTFE/VITON

DESCRIPTION:
PLUG VALVE, 3" ASA 125# C.I. PLG, WRNCH, LoMu LUBE

NOTES:
FACE TO FACE 203MM X ANSI 125 FLANGES 184MM DIA.


DESCRIPTION:
PLUG VALVE, 10" ASA 125# C.I. PLG, WRNCH, LoMu LUBE


DESCRIPTION:
VALVE, DISC LP VALVES ONLY  P/N 1002-2255-00


DESCRIPTION:
VALVES, BUFFER DISC LP & HP  P/N 1000-4688


DESCRIPTION:
SHAFT, LOWER W/BUSHINGS INTMPE #8037A-J1


DESCRIPTION:
IDLER ROLLER  (ADAPTATION) INTMPE DWG#4024-J1


DESCRIPTION:
GASKET, FRAME END, PLATE  P/N 16-506-007


DESCRIPTION:
SEAL-BUNA N.  75-7/8" LONG FOR GROOVE DWG #2183-J1


DESCRIPTION:
PLUG VALVE, 12" ASA 125# C.I. PLG, WRNCH, LoMu LUBE


DESCRIPTION:
SHAFT, 10X12S STD ALL SEALS 2.75" DIA. (CANADA PUMPS STANDARD P/N 7)


DESCRIPTION:
SHAFT, 12X14S STD ALL SEALS 3.875 DIA.(CANADA PUMPS STANDARD P/N 7)


MISC:
DWG #510342/7 DUCTILE IRON 600 IS 280 BHN WITH 600,000# TENSILE STRENGTH

DESCRIPTION:
CASING,  C/W BEARING UNITS 430BHN  - P/N 510342/7


DESCRIPTION:
VALVE, SUCTION F55 SS.WG, GAS-102-969-AO5


DESCRIPTION:
SEALER,DISCHARGE END A=60,B=16,C=10 P/N K 400003


DESCRIPTION:
LIFTER BAR 165-11 BNA,HEAT RESISTANT RUBBER. #2


DESCRIPTION:
MANHOLE COVER PLATE ITEM 11 PP55: 55 X 266 X 393 PP


DESCRIPTION:
DISCHARGE HEAD LIFTER BAR, ITEM 17 LFW 150 X 115


MISC:
B2 BEARING FRAME. ASSY IS SHAFT, LOCK WASHER & NUT


MISC:
2 in one set. Air cost (8sets) India to Kingston $270

NOTES:
3 layer - steel(MS) -Copper Alloy- Babbitt lining.Load bearing capacity this bearing is more.


DESCRIPTION:
SEAL, MECHANICAL CEFILAC GPA 60.35 D264.00


DESCRIPTION:
SEAL, MECHANICAL CEFILAC GPA 78 D 276.00


DESCRIPTION:
SEAL, MECHANICAL CEFILAC GPA 108 D 270.00


DESCRIPTION:
SEAL, MECHANICAL CEFILAC GPA D 172.00 CCR 7R


MISC:
FOR 10X12DSH CANADA PUMP. COMPLETE SEAL STK #611601


MISC:
FOR 4X6DSH CANADA PUMP. COMPLETE SEAL STK #611605

DESCRIPTION:
KIT, SEAL REPAIR #38SMXS3-17N3VS3 2-3/8"


MISC:
FOR 10X12S CANADA PUMP. COMPLETE SEAL STK #611606

DESCRIPTION:
KIT, SEAL REPAIR #44SMSX2-17N3VS3 2-3/4"


MISC:
FOR 12X14S CANADA PUMP. COMPLETE SEAL STK #611609

DESCRIPTION:
KIT, SEAL REPAIR #62SMSX2-17N3VS3 3-7/8"


MISC:
FOR 3X4DS CANADA & GOULDS 3196 PUMP. COMPLETE SEAL STK #611610


MISC:
FOR 5500 B4 GOULDS PUMP. COMPLETE SEAL STK #611617

DESCRIPTION:
KIT, SEAL REPAIR #84FHDS3-S17N3XS3 5-1/4"


MISC:
FOR 5500 B3 GOULDS PUMP. COMPLETE SEAL STK #611619

DESCRIPTION:
KIT, SEAL REPAIR #66FHDS3-S17N3XS3 4-1/8"


MISC:
FOR 4x6 NI-HARD CANADA PUMP. COMPLETE SEAL STK #611620


MISC:
FOR 5500 B3 GOULDS PUMP. COMPLETE SEAL STK #611616


MISC:
NON-ASBESTOS MATERIAL. 463.55mm x 398.78mm x 1/8”  NA1122; GRLK37

DESCRIPTION:
GASKET, CASING COVER (CANADA PUMPS STANDARD P/N 65)


MISC:
GASO TRPLEX PLUNGER PUMP, 6GE-160118-332

DESCRIPTION:
SHIM SET, CONN. ROAD BRG. Z3220 GAS-100570-000.


MISC:
B3 POWER END; 60 HP RATED AND INCLUDES, BEARING HOUSING, SHAFT, BEARINGS, COVERS AND SEALS.


MISC:
B2 BEARING FRAME MECHANICAL SEAL OIL SEAL #416706


NOTES:
SAE 783, which is Aluminium - Tin - Copper Lead free material F820.


MISC:
1.75" I.D. X 0581 X 058H JOHN CRANE 5610QXO(58)H SILICON CARBIDE VS SILICONE CARBIDE WITH VITON O-RINGS


MISC:
BEARING SURFACE COATED WITH COLMONOY
BEARING SURFACE COATED WITH COLMONOY FUSED COATING

DESCRIPTION:
TAIL SHAFT, 3" DIA X 21" LNG 13" CLMNY BRG.


MISC:
SEE STOCK #610984 FOR REPAIR KIT COST $174.00 FROM CHINA. SEE DWG #8001057-J1 (12 SHEETS FOR ALL PARTS


DESCRIPTION:
SLEEVE, SHAFT - P/N G-6973 (CANADA PUMPS STANDARD P/N 8)

OEM PART#:
P/N G-6973 (CANADA PUMPS STANDARD P/N 8)


NOTES:
NOTE: VERIFY DWG#1018 J4 BEFORE MANUFACTURING TO SEE IF ACCORDING TO LATEST REVISION


NOTES:
NOTE: VERIFY DWG#1017 J4 EFORE MANUFACTURING TO SEE IF ACCORDING TO LATEST REVISION


NOTES:
*******CHECK ALPART DWG RV#4 BEFORE MANUFACTURING. ( CHECK RV #5 BEFORE MANUFACTURING)


NOTES:
WEAR RING FOR THIS IMPELLER IS DWG #8001107-J4


MISC:
The tensile strength of GCr15 is 1617(MPa).

NOTES:
**NOTE: VERIFY DWG#1052-J4 BEFORE MANUFACTURING TO SEE IF ACCORDING TO LATEST REVISION.**


NOTES:
NOTE: VERIFY INTMPE DWG #1001-J4 BEFORE MANUFACTURING TO SEE IF ACCORDING TO LATEST REVISION.


NOTES:
**NOTE: CHECK DWG#1044-J4 FOR LATEST REVISION BEFORE MANUFACTURING.**


NOTES:
*NOTE: VERIFY DWG#1043-J4 BEFORE MANUFACTURING TO SEE IF ACCORDING TO LATEST REVISION.*


NOTES:
**NOTE:VERIFY DWG#1050-J4 BEFORE MANUFACTURING TOSEE IF ACCORDING TO LATEST REVISION.**


NOTES:
***NOTE: CHECK DWG#1128-J4 BEFORE MANUFACTURING TO SEE ACCORDING TO LATEST REVISION***


DESCRIPTION:
COVER, END COUPLING SIDE P/N X2RCM160 AX2


DESCRIPTION:
FLINGER, PUMP SIDE,  P/N Y-212B157DX1-228AC


DESCRIPTION:
FLINGER, COUPLING SIDE, P/N Y-2MFL157AX1


MISC:
D13 EPDM SLEEVE, AIR ACTUATED,  316SS GATE, 150# FLANGE


MISC:
FOR PRECIP B/C TRAIN P/N KGD10ACB6D13R14 (01/99 VF)    KNIFGAT/316SS/EPDM/150#/AIR ACT.


NOTES:
***CHECK FOR LATEST REVISION BEFORE MANUFACTURING.***


NOTES:
***NOTE: CHECK DWG#1061-J4 FOR LATEST REVISION BEFORE MANUFACTURING.***


NOTES:
QUALITY STEEL FOUNDRIES EDMONTON 780-434-7565. JOHN AMAR QUOTE #11142 AUG 30/2000 $680.00 + PATTERN TOOLING $4,100.00


NOTES:
***********VERIFY DRAWING TO OEM CHANGES IN DRAWING********


NOTES:
WHEN PRODUCING, MAKE PATTERN TO MAXIMUM DIAMETER & MACHINE DOWN TO DIAMETER ORDERED


NOTES:
WAS OLD NUMBER 5601753007; 450kgs/ea with packaging


NOTES:
**NOTE: VERIFY DWG#1201-J4 BEFORE MANUFACTURING TO SEE IF ACCORDING TO LATEST REVISION.***


DESCRIPTION:
IMPELLER, 4V 25" DIA RH #046513G010 CLOSED


NOTES:
**NOTE: CHECK LATEST REVISION OF DWG#1056-J4 BEFORE MANUFACTURING.**


NOTES:
*NOTE: CHECK LATEST REVISION OF DWG#1054-J4.


NOTES:
**NOTE: CHECK DWG#1051-J4 FOR LATEST REVISION BEFORE MANUFACTURING.**


NOTES:
******VERIFY DRAWING, WAS REVISED ON 12/2000**********


NOTES:
*NOTE: CHECK DWG#1049-J4 FOR LATEST REVISION BEFORE MANUFACTURING.*


NOTES:
**NOTE: VERIFY DWG#1047-J4 BEFORE MANUFACTURING TO SEE IF ACCORDING TO LATEST REVISION.**


NOTES:
**NOTE: CHECK DWG#1046-J4 FOR LATEST REVISION BEFORE MANUFACTURING.**


NOTES:
**NOTE: CHECK DWG#1045-J4 FOR LATEST REVISION BEFORE MANUFACTURING.**


NOTES:
***NOTE: CHECK DWG#1117-J4 FOR LATEST REVISION BEFORE MANUFACTURING.***


MISC:
MADE BY McKENZIE SPECIALTY CASTING 4047          *********(VERIFY MATERIAL TYPE)*********

NOTES:
ALPART80896 IGL $1099 Jun'18, 2% discount, actual $1077.02


MISC:
PATTERN AT TOWNLEY,(606060) ASTM A216WCB


MISC:
3/8" X7/16" NO. 109A2-A-45 ALLEN SET SCREWS


MISC:
316SS HARD SURFACED WITH PLEXUS BORIDE CARBIDE ALLOY


MISC:
NEW #62729413 FITS PUMPS 4X17LP & 10X17LP ALSO MATERIAL CAN BE GLASS FILLED URETHANE


MISC:
HT TO ROCKWELL 600 BRINELL ASTM A532 CLASS III, KmTBCr26


MISC:
SURFACED WITH PLEXUS BORIDE CARBIDE ALLOY


MISC:
HARD SURFACED WITH PLEUS BORIDE CARBIDE ALLOY, HGM #3408


MISC:
HARD SURFACED WITH PLEXUS BORIDE CARBIDE ALLOY (NICKEL-CHROME-BORON)


NOTES:
**************CHECK DRAWING BEFORE PRODUCING, REVISION HAS CHANGED TO #2 ON ALPART DWG.


NOTES:
***NOTE: SEE DWG#1118-J4 FOR LATEST REVISION BEFORE MANUFACTURING.***


NOTES:
NOTE: VERIFY DWG#1041-J4 BEFORE MANUFACTURING TO SEE IF ACCORDING TO LATEST REVISION.


NOTES:
*NOTE: CHECK DWG#1039-J4 FOR LATEST REVISION BEFORE MANUFACTURING.*


NOTES:
*NOTE: CHECK DWG#1038-J4 FOR LATEST REVISION BEFORE MANUFACTURING*


NOTES:
***NOTE: VERIFY DWG#1234-J4 BEFORE MANUFACTURING TO SEE IF ACCORDING TO LATEST REVISION.***


DESCRIPTION:
KEY, STEP TYPE FOR LEVER & CRANK #N-12306


NOTES:
*NOTE: VERIFY DWG 21-5125-M-SK/R6  BEFORE MANUFACTURING TO SEE IF ACCORDING TO LATEST REVISION*


NOTES:
*NOTE: CHECK DWG#1042-J4 FOR LATEST REVISION BEFORE MANUFACTURING.*


NOTES:
***CHECK DWG#1316-J4 FOR LATEST REVISION BEFORE MANUFACTURING.***


NOTES:
***NOTE: CHECK DWG#1317-J4 FOR LATEST REVISION BEFORE MANUFACTURING.***


NOTES:
***NOTE: CHECK DWG#1067-J4 FOR LATEST REVISION BEFORE MANUFACTURING.***


NOTES:
*NOTE: CHECK DWG#1040-J4 FOR LATEST REVISION BEFORE MANUFACTURING.*


NOTES:
*****REVISED TO RV#6, CHECK DRAWING BEFORE MFG.********


NOTES:
***NOTE: CHECK DWG#1224-J4 FOR LATEST REVISION BEFORE MANUFACTURING.***


NOTES:
***NOTE:  VERIFY DWG#1070-J4 FOR LATEST REVISION BEFORE MANUFACTURING.***


NOTES:
***NOTE: CHECK DWG#1068-J4 FOR LATEST REVISION BEFORE MANUFACTURING.***


DESCRIPTION:
WASHER, THRUST FOR RIGHT HAND HOUSING ASS., #109942 HGM


DESCRIPTION:
HOUSING, SEC. GEAR STD.. P/N21000A, EIMCO P/N SA-UN-11566-


DESCRIPTION:
HOUSING, WORM GEAR ,#X012336 P/L72782A30


DESCRIPTION:
IMPELLER, 23" DIA DIA RH #046157G01A1228


NOTES:
***VERIFY DWG BEFORE PRODUCING, WAS REVISED IN 12/2000**PATTERN COST. 205.00 US


NOTES:
Outer $590.00 + pattern 560.00,  Inner 70.00 + pattern 115.00  material 316


NOTES:
NOTE: VERIFY INTMPE DWG#1004 J4 BEFORE MANUFACTURIING TO SEE IF ACCORDING TO LATEST REVISION


NOTES:
STD ALLOYS DWG #P04-3159  ( CHECK FOR RV2)


MISC:
AIR ACTUATED 150LB FLANGES UNFLOW SYSTEM


MISC:
FOR PRECIP B/C TRAIN P/N KGD12-AC-B6D14  (S 01/99 VF)

DESCRIPTION:
VALVE, 12" 316SS KNIFE, NITRIL HTP SLVS AIR 150# FLANGE


MISC:
AIR ACTUATED 316 STAINLESS STEEL GATE 150# FLANGE  FOR PERCIP B/C TRAIN P/N KGD8ACB6D13R14 (S 01/99 VF)

DESCRIPTION:
VALVE, EPDM SLV, 316SS GATE, 150# FLNG AIR ACT.


MISC:
COULD ALSO ORDER CD4MCU MATERIAL, (606061)

NOTES:
WEAR RING FOR THIS IMPELLER IS DWG #8001107-J4; COMPETITIOR $14786.20, 2012


MISC:
ALPART PN.08800.4    (quote from India w/ support disc of PP w/o metal ring inside $410

DESCRIPTION:
SLEEVE, 16 INCH W/ INTGRL SPRT DISC P.N.08800.3


MISC:
ALPART DWG 21-5187-M-SK MATERIAL IS HIGH LEAD BRONZE


NOTES:
FINAL DETAIL WHEN ORDER RECEIVED TO COMPLETE THE DRAWING.


NOTES:
FINAL DETAIL WHEN ORDER RECEIVED TO COMPLETE THE DRAWING.
As the discharge trunion is highly similar to the feed trunion, only the sketch for the discharge unit is attached. Please note that the customer will have to provide access to sample trunions if we were to be asked to supply same. The customer drawing was used to develop our drawing 8001112-J4 but due to lack of detail on it (customer sketch), a few assumptions had to be made; in my view these will not overly affect the price.

In summary, please quote the following:

    72" x 12" bushing - qty 2
    Discharge trunion for 10' 6" x 16' 6"ball mill - qty 1
    Feed trunion for 10' 6" x 16' 6"ball mill - qty 1


NOTES:
*NOTE: VERIFY DWG#1037-J4 BEFORE MANUFACTURING TO SEE IF ACCORDING TO LATEST REVISION*


NOTES:
*NOTE CHECK DWG#1048-J4 FOR LATEST REVISION.*


NOTES:
***NOTE: VERIFY DWG#1060-J4 BEFORE MANUFACTURING TO SEE IF ACCORDING TO LATEST REVISION.***


NOTES:
***NOTE: CHECK DWG#1066-J4 FOR LATEST REVISION BEFORE MANUFACTURING.***


NOTES:
**NOTE: VERIFY DWG#1069-J4 BEFORE MANUFACTURING TO SEE IF ACCORDING TO LATEST REVISION.***


NOTES:
***CHECK DWG#1073-J4 BEFORE MANUFACTURING TO SEE LATEST REVISION.****


DESCRIPTION:
IMPELLER, 25-1/2" DIA W/INTEGRAL WEAR RING

NOTES:
***NOTE: CHECK DWG#1073-J4 BEFORE MANUFACTURING TO SEE LATEST REVISION.***


NOTES:
from GIW_Canada_GIW dwg#1995C-00-0065D; GIW SAP#02526509; price from factory $125, markup to $155


MISC:
EXTENSION SPRING, 1/8" X 10-5/8" WITH END HOOKS, LABYRINTH **NOTE** 3-15/16" P/N 90259-03-48STP,


MISC:
SHAFT 3.938", 7.315" FLANGE, DOUBLE ROTOR, FOR DRIVE END


MISC:
SHAFT 3.938", 7.835" FLANGE, DOUBLE ROTOR, FOR WET END


MISC:
CAP MOUNTED CLUTCH FOR BALL MILL SLURRY MIX, CRITICAL


DESCRIPTION:
SHOE SET, FRICTION ASSY. P/N 414590 (20/SET)


MISC:
BUNA N RUBBER SEAT, CENTER TYPE VALVE HEAVY DUTY WAFER TYPE

DESCRIPTION:
VALVE, BUTTERFLY RESLIENT SEATED LEVER OP.


MISC:
AIR ACTUATOR EPDM ENCAPSULATED SLEEVE WITH EPDM RETAINER FLANGES


MISC:
AIR ACTUATED EPDM ENCAPSULATED SLEEVE ITH EPDM RETAINER FLANGES 150# FLANGE 17-4PH SS GATE


MISC:
(SS) FITTED IN THRUST BEARING END COVER,  FOR G.I.W PUMP-MODEL 18 X 18 LSA 44-2044D S/N 5012-5618 TO 5621

NOTES:
OD=9.244 INCHES X ID=6.442 X HEIGHT 2.586 INCHES


MISC:
(SS) FITTED IN RADIAL  BEARING END COVER,  FOR G.I.W PUMP-MODEL 18 X 18 LSA 44-2044D S/N 5012-5618 TO 5621

NOTES:
OD=9.244 INCHES X ID=6.442 X HEIGHT 2.015 INCHES


MISC:
MAT'L 316 SS AND  HARD SURFACED WITH PLEXUS BORIDE CARBIDE ALLOY


MISC:
ASH CROFT 636 OAH, FOR 983D   BEARING ASSEMBLY 6-7/16"


MISC:
CAIR EQUAL VALVE; SEE QUOTE FILE IN ALPART FOLDER FOR TECHNICAL & DRAWING

DESCRIPTION:
BALL, VALVE 8" 150LB HCSCHRPLTD/TFEDBLSTD/LVR


MISC:
Trunnion Mounted Ball Valve, API 6D, full bore, body: A105, ball: A105+ENP, seat: TEFLON, lever operated

DESCRIPTION:
VALVE, BALL FULL BORE A105+ENP TFE SEAT LVR


MISC:
Valve Special Bayonet Slurry Drain 6x4 inches, 150 lb V-711, Stockham S-15-D 150 X 150 (B10/92)


MISC:
V-704 Bayonet Slurry Ad-6062 Cast Carbon Steel 90 deg. Plain Bearing Dual Handle Operated


MISC:
FOR OIL INJECTION LANCE YO92 TO YO95. IT.37 P/L IT.22-Y-90


DESCRIPTION:
SEAL, COUPLING END LABY OIL #1801A112D1AE001


MISC:
SHIM REF. 257A P/N Y-1437D257AX1 BETWEEN END COVER & BEARING HOUSING


MISC:
Replaced with G6DH w/3in 150# suction and 2.5in diameter bore 900# square, Flange discharge IMO Pump

DESCRIPTION:
PUMP, LOW PRESSURE SUCTION 3"x 150# FLANGE DISCHARGE 2- 2 1/2 " Diameter bore, 900#flange for heavy fuel oil usage


MISC:
ATLOY OVERSIZE HAZELTON PUMP MODEL 10BS-CTS MUD LAKE BOOSTER PUMP. (WAS P/N 14533C * S3/98 ES)


MISC:
FOR HAZELTON PUMP MODEL 10BS-CTX MUD LAKE BOOSTER PUMP. OLD P/N 12450-08394. (S 7/98 ROX)


MISC:
FOR HAZELTON PUMP MODEL 10BS-CTX MUD LAKE BOOSTER PUMP. OLD P/N 12449 & 568756-007. (S 10/98 ROX)


DESCRIPTION:
SPRING, COMPRESSION P/N 814430-030.625  X 1L #50 CAP


MISC:
MUD LAKE BOOSTER PUMP. OLD P/N 014629-P14629 (S3/98 ES)

DESCRIPTION:
SPACER, RING THRUST BEARING P/N 575534-026


MISC:
REF 160B MATERIAL . OLD P/N 202PNX-208B160AX2-866

DESCRIPTION:
BEARING, COVER PLAIN END, P/N  X-208B160AX2-816  (S 7/90)


MISC:
REF 88 MATERIAL 9. OLD P/N *Y-250D88SX1 (S 2/99 ROX)


MISC:
ASTM A532/A CLASS III 58-63RC, 600 BRINELL


NOTES:
*******CHECK ALPART DWG RV#1 BEFORE MANUFACTURING*********


MISC:
NOTE: MATERIAL CHANGE TO MONEL. (606195)


DESCRIPTION:
IMPELLER, W/RINGS OD 12-3/4" DIA #3X12A3AX2A-813


NOTES:
*******CHECK ALPART DWG RV#2 BEFORE PRODUCTION**** MATERIAL CHANGE +


NOTES:
increase SP to $482. $579 to AlPart 07/18


DESCRIPTION:
LINER, LIQUID CYLINDER REF#73 14.000" O.D.


MISC:
MATERIAL CAN BE: ASTM A532-65a CLASS III TYPE A.


MISC:
MATERIAL TYPES: STEM = AISI 1018, DISC = ASTM A36 WCB W/STELLITE #6 OVERLAY


NOTES:
VERIFY INTMPE DWG#1007 J4 BEFORE MANUFACTURING TO SEE IF ACCORDING TO LATEST REVISION


NOTES:
NOTE: VERIFY INTMPE DWG#1008J4 BEFORE MANUFACTURING TO SEE IF ACCORDING TO LATEST REVISION


NOTES:
NOTE: VERIFY DWG#1024 J4 BEFORE MANUFACTURING TO SEE IF ACCORDING TO LATEST REVISION


NOTES:
NOTE: VERIFY INTMPE DWG#1025 J4 BEFORE MANUFACTURING TO SEE IF ACCORDIING TO LATEST REVISION


NOTES:
VERIFY DWG#1027-J4 BEFORE MANUFACTURING TO SEE IF ACCORDING TO LATEST REVISION


NOTES:
NOTE: VERIFY DWG#1030-J4 BEFORE MANUFACTURING TO SEE IF ACCORDING TO LATEST REVISION


MISC:
SEAL TYPE:packing/expeller /Impeller and liners: R55/ Expeller & expeller ring: A05 / WITH DC COMMON BASE/COUPLING/GUARD

DESCRIPTION:
43CR PUMP SET, BARE SHAFT PACKING /EXPELLER


NOTES:
Quote from a verbal talk on the visit to Triton November 2016 Re: John & Oscar. VTP Materials: Impellers; 304SS, Shafts; 420SSHT, Bowls: Ductile Iron Glass CTD, Bearings: Graphite, Inlet Strainer: 316SS, Hardware:316SS


MISC:
MATERIAL: S.S.420 . BEARING FOR BOWL DISCHARGE & INTERMEDIATE ARE INTERCHANGABLE

DESCRIPTION:
BEARING, BOWL INTERMEDIATE (ITEM 11); 300MP181-05

NOTES:
TRITON $53 01/18; material type is Leaded Semi-Red Brass Copper Alloy No. C84400


DESCRIPTION:
SPIDER & BRG  NOT INSTALLED IN THIS MODEL


NOTES:
***NOTE: CHECK DWG#1235-J4 FOR LATEST REVISION BEFORE MANUFACTURING.***


NOTES:
***NOTE: CHECK DWG#1300-J4 FOR LATEST REVISION BEFORE MANUFACTURING***


NOTES:
***NOTE: CHECK DWG#1301-J4 FOR LATEST REVISION BEFORE MANUFACTURING.***


MISC:
21-5005-M-SK  1970 DRAWING, SUPERCEDED BY 1048--J4/R1


NOTES:
***NOTE: CHECK DWG#4101-J4 FOR LATEST REVISION BEFORE MANUFACTURING.**


NOTES:
**NOTE: CHECK DWG#1053-J4 BEFORE MANUFACTURING TO SEE IF ACCORDING TO LATEST REVISION.**


NOTES:
***NOTE CHECK DWG#1255-J4 FOR LATEST REVISION BEFORE MANUFACTURINE.****


NOTES:
****************CONFIRM ROTATION OF IMPELLER WHEN ORDERING****************


MISC:
ALTERNATE CAST MATERIAL HK40, LURGI DWG #D70142001L00001 YO92 TO  95 AS PER ALPART DRAWING 29-0000-M-SK-RO


NOTES:
***NOTE: CHECK FOR LATEST REVISION BEFORE MANUFACTURING***


NOTES:
****NOTE: CHECK DWG#1229-J4 FOR LATEST REVISION BEFORE MANUFACTURING.****


MISC:
MATERIAL 310 STAINLESS STEEL OR ITS CAST EQUIVALENT OF HK40 REF. LURGI DRAWING # D 70142001L00001 REVISED

NOTES:
NEW NOZZLE DESIGN TO REPLACE PARTS SHIPPED ON PO 818123 AND OUR INV #46027

NOZZLE FOR FLUID BED FURNACE COMPLETE ASSEMBLY CONSISTING OF ITEMS 1 2 3 & 4 MATERIAL 310 STAINLESS STEEL OR ITS CAST EQUIVALENT OF HK40 REF.LURGI DRAWING # D 70142001L00001 REVISED - QUALITY (120 EA EQUAL 1 SET) (MIN/MAX CHANGE A 12/98 WD) (61070589). 100 of Each


MISC:
TWO RECORDS FOR THIS STOCK#, UNDER TWO DIFFERENT DWG


MISC:
FOR OIL INJECTION LANCES YO92 TO YO95 ITEM 38-PARTS LIST ITEM 22-Y-90: 23-Y-90  
DRAWING NO. D LURGI CALCINELURGI DWG #D70142001L00001


MISC:
19 INCH DIAMETER ITEM #101 FOR B3 6*18-19 HEAD TANK PUMP


MISC:
L RAKE DRIVE IN CLARIFICATION AND SLURRY MIX

DESCRIPTION:
HOUSING, MAIN GEAR ITEM 1 ; P/N 112212A2A


MISC:
800GPM @550 TDH(M), 6 METER DEEP WELL W/ 4 METER NPSH


NOTES:
*MUST SUPPLY METAL CORE FOR IRATHANE TO STRIP AND RE-COAT


NOTES:
SHELL HALF FOR RUBBBER LINER SUCTION SIDE 10"


MISC:
OEM SAYS PHASE TO 39584 - SAME DRAWING #


NOTES:
SOMARAKIS DWGS SUPPLIED FOR DIM./HEAD & BRG. HSG. 2163-D1(P1&P2) SUPPLIED AS AN ASSY


MISC:
316SS, 17-4PH SHAFT, RTFE SEAT, DOUBLE OFFSET HIGH PERFORMANCE ANSI CLASS VALVES


MISC:
316SS, WAFER, 17-4PH SHAFT, RTFE SEAT, DOUBLE OFFSET HIGH PERFORMANCE ANSI CLASS VALVES GEAR OPERATED


MISC:
316SS, 17-4PH SHAFT, RTFE SEAT, DOUBLE OFFSET HIGH PERFORMANCE ANSI CLASS VALVES GEAR OPERATED


NOTES:
SAMPLE REQUIRED FOR FIRST ORDER, MINIMUM PURCHASE IS 5 PIECES


MISC:
SAME AS DENVER IMPELLER EXCEPT HUB THREADS ARE 1-1/4" -12 UNF-2B R.H.

DESCRIPTION:
IMPELLER, OPEN 3X3 98-330-286-501 NELSON


DESCRIPTION:
LINER, FRAME PLATE/GLADULA, PLATO FORRADA F6036U02


MISC:
stuffing assy include: packing box, gland, bushing

NOTES:
cost $100 is for stuffing box assembly including packing box, gland & bushing


MISC:
NEW Length (RE: Mauro???). PLEASE ENSURE NEWEST LENGTH IS USED.


NOTES:
Chinese factory name "LINE SHAFT". OrderedQTY4-08/18


MISC:
FROM REQUEST BY FERNANDO LARA -Turbine Pump, 3280GPM@400FT TDH, effeciency 85.7%, 386BHP, bowls C.I.CL30, , flanged clumn 12"DIA@12'length,


NOTES:
COVER PLATE FH4013D21 $5390.10 WARMAN 2000 PRCBK


NOTES:
AKA: EXPELLER FH028D21 $501.30  WRMNPB 2000


MISC:
SQUARE BRADED ROPE SIZE 16mm X 16mm X 364mm LONG


MISC:
3mm thick x 190mm O.D. x 150mm I.D. NON ASBESTOS GASKET MATERIAL, CONTACT CUSTOMER FOR PREFERENCE


MISC:
3mm thick x 150mm O.D. x 100mm I.D. NON ASBESTOS GASKET MATERIAL, CONTACT CUSTOMER FOR PREFERENCE


MISC:
included in FASTENERS FOR PUMP / SIPF=LIFTING SCREW M20 (23)


MISC:
M16 NUT & M15 WASHER WITH HEX BOLT M16X150 MAKES ASSY


NOTES:
TOOLING CHARGE FIRST ORDER FROM HEBEI, PRICE INCLUDES #


MISC:
34266 = 510 MATERIAL         IAECS DWG IS 31" TRIM TO 26"

NOTES:
HC-34 = TOWNLEY HI. CHROME 34%                   1516-C02 is 31" must Trim to 26"


NOTES:
TEST & INSPECTION: API 598, DESIGN & F-F STANDARD: API 609


DESCRIPTION:
BFV, 10" WFR, H202SRVC, A48,EPDM,316SS, GROP.


DESCRIPTION:
BFV, 12" WFR, H202SRVC, A48,EPDM,316SS, GROP.


DESCRIPTION:
BFV, 16" WFR, H202SRVC, A48,EPDM,316SS, GROP.


DESCRIPTION:
BFV, 8" WFR, H202SRVC, A48,EPDM,316SS, GROP.


DESCRIPTION:
BFV, 20" WFR, H202SRVC, A48,EPDM,316SS, GROP.


DESCRIPTION:
BFV, 24" WFR, H202SRVC, A48,EPDM,316SS, GROP.


DESCRIPTION:
BFV, 30" WFR, H202SRVC, A48,EPDM,316SS, GROP.


DESCRIPTION:
BFV, 36" WFR, H202SRVC, A48,EPDM,316SS, GROP.


DESCRIPTION:
BFV, 36" WFR, BRINE.SRVC, A48, EPDM, 316SS, GROP.


DESCRIPTION:
BFV, 18" WFR, GNRL.SRVC, A48, EPDM, 316SS, GROP.


DESCRIPTION:
BFV, 20" WFR, GNRL.SRVC, A48, EPDM, 316SS, GROP.


DESCRIPTION:
BFV, 24" WFR, GNRL.SRVC, A48, EPDM, 316SS, GROP.


DESCRIPTION:
BFV, 30" WFR, GNRL.SRVC, A48, EPDM, 316SS, GROP.


NOTES:
TO COVER IN TUNGSTEN CARBIDE .01" THICK ADD 400.00 TO PRICE- REPLICA CHARGE 275. 2 WEEK DELIVERY


DESCRIPTION:
IMPELLER, 13" DIA 3V 400BHN - P/N 411744


DESCRIPTION:
IMPELLER, 15" DIA 3V 400BHN - P/N 411744


DESCRIPTION:
IMPELLER, 16" DIA 400BHN 8V W/RINGS - P/N 312727


DESCRIPTION:
IMPELLER, 14" DIA 3V 400BHN - P/N 411744


NOTES:
TOOLING ON FIRST PART. PRICE INCLUDES ALSO ENGINE SIDE LINER #38634 TOOLING


NOTES:
NOTE: CMC COST INCLUDES PATTERN: BASE COST IS $2,475.00


NOTES:
SEE: SKETCH #1521-C02 SHOWS MODIFIED VANES


NOTES:
$16.50/LB AVERAGE COST FOR ALLOY 20 FROM CHINA


MISC:
NOTE: PART NUMBER IS FOR IMPELLER PRODUCED IN 510 NATURAL RUBBER

NOTES:
FOR GILDERSLEEVE ORDER TRIM IMPELLER TO 26" DIAMETER


MISC:
ALLOY 20 SS SHIP 2-3 WEEKS, CD4 MATERIAL 6-8WKS - SAME PRICE

DESCRIPTION:
COVER, REPELLER W COOLING WATER JACKET (WELDED)


MISC:
NOTE: FOR EFP-EXPORT ORDER, TRIM IMPELLER TO 7.3" DIAMETER; QUOTE $558.60 IN 09/05


MISC:
MARK III   1500 RPM  CAP100GPM       *** SAME # FITS MARK II MODEL 2X2R-10/100  & MARK II 2K2X1-10/73ARW ***


MISC:
MARK III   1500RPM        TDH33FT           ***NOT AVAIL IN DCI OTHER THAN OEM***


MISC:
MARK II  1500 RPM  TDH36MDH       *** SAME # FITS MARK III MODEL 2K3X2-82/72RV  &  MARK II 2K2X1-10/73ARW***


MISC:
MARK II  3000RPM TDH149FT, GPM60  *** SAME# FITS MARK II 2X2-10/100 & MARK III 2K3X2-82/42RV


MISC:
BLOCK KIT  P/N 24313BK REQUIRED TO RAISE MOTOR TO OEM CENTRE HEIGHT OF 10"


MISC:
TO RAISE MOTOR TO OEM CENTRE HEIGHT OF 10"


NOTES:
CUSTOMER IS GABOT BIOCHEMICALS IN ISRAEL.


MISC:
CONSISTS OF 1 SHAFT (24) 1 NUT (6) 1 KEY (7)

DESCRIPTION:
SHAFT, ASSY C/WITH NUT, KEY 40CR #150MPD605-09

NOTES:
ROTATING COMPLETE ASSEMBLY IS DWG #2082-C2


DESCRIPTION:
SEAL, SHAFT SLEEVE Chr. CTD. #150MPD70-02 (21)


MISC:
RETENEDOR,BALINERA / WITH RUBBER BEARING FOR SHAFT DIA. 2-3/16"


DESCRIPTION:
BOWL, INTERMEDIATE, 6724131  / TAZA,INTERMEDIARIA 6724131


MISC:
MODIFIED FOR CEFILAC SEAL    SLURRY PUMP  $690.00; 07/13

DESCRIPTION:
LINER, DRIVE SIDE 6" CFLC BORE - P/N 215372


DESCRIPTION:
CASING, PACKED BOX 400BHN - P/N 412214-5


DESCRIPTION:
COVER, CASING DRIVE SIDE - P/N 053-D-0002


MISC:
1750RPM, Shaft power of pump at rated point: 269HP, 70% EFF 20'NPSHR


MISC:
316SS, LUGGED, 17-4PH SHAFT, RTFE SEAT, DOUBLE OFFSET HIGH PERFORMANCE ANSI CLASS VALVES


DESCRIPTION:
LINER, DRIVE SIDE 500Bhn 3-1/2" STD BORE  - P/N 89


DESCRIPTION:
CASING, W/PKG BOX 280BHN  - P/N 510342/7


DESCRIPTION:
CASING, W/STUFFING BOX 220BHN - P/N 510180


DESCRIPTION:
IMPELLER, 11-3/4" DIA W/RING  - P/N G-6401R


DESCRIPTION:
SLEEVE, SHAFT PLASMA COATED - P/N 319344


DESCRIPTION:
IMPELLER, 22" DIA 3V 400BHN W/RING - P/N 314992


DESCRIPTION:
SLEEVE, SHAFT CHROME OXIDE PLASMA COATED - P/N 310908


DESCRIPTION:
IMPELLER, 20-1/2" DIA 430BHN 8V W/RINGS - P/N 312727


DESCRIPTION:
IMPELLER, 23-1/2" DIA., 400BHN 5V C/W W/RING - P/N 314995


DESCRIPTION:
IMPELLER, 18" DIA., 400BHN 5V W/RING - P/N 314995


DESCRIPTION:
IMPELLER, 14" DIA 400BHN 3V  C/W W/RING - P/N 319181A


DESCRIPTION:
IMPELLER, 13" DIA 400BHN 3V C/W W/RING - P/N 319181A


DESCRIPTION:
RING, IMPELLER WEAR - P/N 213209 440 Bhn


MISC:
316SS, WAFER 17-4PH SHAFT, RTFE SEAT, DOUBLE OFFSET HIGH PERFORMANCE ANSI CLASS VALVES GEAR OPERATED


MISC:
316SS,17-4PH SHAFT, RTFE SEAT, DOUBLE OFFSET HIGH PERFORMANCE ANSI CLASS VALVES


MISC:
316SS, WAFER, 17-4PH SHAFT, RTFE SEAT, DOUBLE OFFSET HIGH PERFORMANCE ANSI CLASS VALVES


MISC:
DENVER PART #503459 & 50184. OUTBOARD BRG. CAP  ALLIS CHALMERS #98-331-901-801


MISC:
2.375 X 1.8745 X 3.6875" LONG STANDARD SLEEVE


MISC:
CONJUNTO,EJE, 503300; (INCLUDE ALL COMPONENTS IN OEM SHEET) SAME AS 98-200-038-501

NOTES:
"this part number is for the complete bearing assembly, this includes shaft, bearings and cylinder as we name it locally." Grosvin


DESCRIPTION:
LINER, GLAND SIDE 8X6 RBR 98-231-123-501


MISC:
ASTM A536 DI LUGGED BODY EPOXY COATED, HASTELOY DISC & STEM, VITON SEAT, ANSI CLASS EPOXY GEAR BOX VALVES

DESCRIPTION:
VALVE, BTRFLY 6" LG, VTNRS150#ANSI.EPXCGROP


DESCRIPTION:
VALVE, BTRFLY 8" LG, VTNRS150#ANSI.EPXCGROP


DESCRIPTION:
BUTTERFLY, LUG TYPE HP 26" 150# ANSI RTFE


DESCRIPTION:
BUTTERFLY, LUG TYPE HP 28" 150# ANSI RTFE


DESCRIPTION:
BUTTERFLY, LUG TYPE HP 30" 150# ANSI RTFE


MISC:
TUBO,DESCARGA, C25SAB126, ABRASN RESIST part#20444; PHTSA#5364


MISC:
INTERCHANGEABLE A/C NAT RUBBER 98-231-123-501


MISC:
IMPULSOR,HULE NATURAL  23972/ HOLZ # 644-05191, $526.00 TO NYRSTAR, 04/13; SAME AS 21802; PHTSA#5082


DESCRIPTION:
VALVE, BTRFLY 3" LG, VTNRS150#ANSI.EPXCGROP


MISC:
WAFER TYPE, FF API 609, CAT A/AWWA C504 BARE SHAFT, BODY ASTM A216 GR WCB, DISC ASTM A890 GRD CD4MCu SPINDLE O-RING EPDM, BEARING BUSHING NYLON. DESCRIPTION: POSITIVE SHUT OFF, BI-DIRECTIONAL

DESCRIPTION:
VALVE, SEATLSS BTRFLY 4" CD4 DISC/WCB BDY

NOTES:
CLASS II (5% LEAKAGE OF MAIN FLOW) DOUBLE FLANGED. CENTRIC DISC LOW LEAKAGE DESIGN. API-609 STD.


DESCRIPTION:
CHECK, WAFER DULPLTWFR-WCB-ANSI 300# RTNLSS


DESCRIPTION:
CHECK, WAFER DULPLTWFR-WCB-ANSI 150# RTNLSS


MISC:
CAMISA, P/BALINERA 4"-1100SP (FOR V-DRV PUMPS)


DESCRIPTION:
VALVE, SEATLSS BTRFLY 6" CD4 DISC/WCB BDY


DESCRIPTION:
VALVE, SEATLSS BTRFLY 10" CD4 DISC/WCB BDY


MISC:
SEAL PTFE, WORK PRES. TO 10KG/CM3, API598 TESTING, FULL LUG TYPE ANSI B 16.5 (150#)

DESCRIPTION:
BFV, LG CF8 BODY, CF8 DISC,17-4 SHAFT,6",150#

NOTES:
DOUBLE OFFSET HIGH PERFORMANCE ANSI CLASS VALVES GEAR OPERATED


DESCRIPTION:
BFV, LG CF8 BODY, CF8 DISC,17-4 SHAFT,10",150#


DESCRIPTION:
BFV, LG CF8 BODY, CF8 DISC,17-4 SHAFT,12",150#


DESCRIPTION:
BFV, LG CF8 BODY, CF8 DISC,17-4 SHAFT,20",150#


DESCRIPTION:
BFV, LG CF8 BODY, CF8 DISC,17-4 SHAFT,24",150#


DESCRIPTION:
BFV, LG CF8 BODY, CF8 DISC,17-4 SHAFT,30",150#


MISC:
Pneumatic 
Double Acting
10 kg/cm2
ANSI B16.5 class 150 
EPDM - HTP encapsulated sleeve Slurry

DESCRIPTION:
VALVE, KGD 12" AC VALVE C/W PNEUMATIC CLYNDER VALVE


NOTES:
CLARKSON SELLS LIST X .6 TO DISTRIBUTORS. COMPLETE SLEEVE IS $1211.00 (2PC). IPT COST IS $385 FOR 1 PC.


NOTES:
INCREASE PRICE TO NYRSTAR FROM $532 TO $692.00(2/14), EG $875IGL, $965EU (7/18)


NOTES:
STU GETS 10% COMMISSION ON SALE OF THIS VALVE, JOHN.


MISC:
NOTE: SAME SHAFT FITS MODEL LSA-25 SIZES 6X8 & 8X8


MISC:
21" DIA THROAT. Material is KmTBCr26 modified to meet 028G spec.

DESCRIPTION:
LINER, SUCTION 53.720" DIA.                     (DRAWING MUST BE VERIFIED)


MISC:
DESW CATEGORY DBA8150-K-361736MT ANSI VALVES

DESCRIPTION:
BUTTERFLY, HP METSO VLV 12" 150# C/W HND CRK


DESCRIPTION:
BUTTERFLY, HP METSO VLV 16" 150# C/W HND OP.


DESCRIPTION:
VALVE, SEATLSS BTRFLY 12" CD4 DISC/WCB BDY


DESCRIPTION:
VALVE, SEATLSS BTRFLY 8" CD4 DISC/WCB BDY


NOTES:
*PIPE: A316 GR IP 316L  PLATE: A218 IP 316L


NOTES:
*PIPE: A316 GR IP 316L  PLATE: A218 GR IP 316L


NOTES:
*PIPE: A316 GR IP 316L   PLATE: A218 GR IP 316L


DESCRIPTION:
BEARING, RUBBER #BS-2 3/16" 60 DUROMETER

NOTES:
$180JM 11/16. Small item,shipping cost $50 (Re:Naomi Aug24 email 511524)


NOTES:
SOMARAKIS DWGS SUPPLIED FOR DIM./HEAD & BRG HSG 2163-D1(P1&P2) SUPPLIED AS AN ASSY


DESCRIPTION:
IMPELLER, 4V 21.75" DIA RH #046513G010 CLOSED


DESCRIPTION:
IMPELLER, 4V 23" DIA RH #046516G010 CLOSED


NOTES:
PACKING RING: 3/8" SQ. PACKING ANGLE CUT FOR 3-1/2" X 2-3/4"


NOTES:
*ROKIDE COATED: CHROME OXIDE SPRAY CERAMIC (92% CHR) 5-7 MICRON FINISH, 1400 KNOB HARDNESS. PRIMARY COAT IS NICKEL CHROME: 80-20.


NOTES:
$400.00 TOOLING CHARGE 38MM X 60MM/1.750X2.375X.386 7/16 C/S GREEN COLOR CODED


NOTES:
SIZE: 2-38/8" X 1-1/2" X 3/8" HEIGHT  STACK HEIGHT=3-1/8"               SERVICE: OIL ADDITIVES, NON ABBRASIVE     250-350 F                     10,000  P.S.I.G.  VIOLET MARKED


NOTES:
SIZE 2-3/8" X 1-23/32" X 5/16" HEIGHT, STACK hEIGHT=2-11/16"                SERVICE: OIL ADDITIVIES, NON ABBRASIVE                                    250-350 F         10,000 P.S.I.G.                                       GREEN MARKED


MISC:
316SS, 17-4PH SHAFT, F316 SEAT, DOUBLE OFFSET HP ANSI CLASS VALVES GEAR SS316+Graphite DISC SEAT


NOTES:
bare stem (torque with 1.3 safety factor: 958N.m, stem: 35mm, ISO F14)


MISC:
316SS, 17-4PH SHAFT, PPL SEAT, DOUBLE OFFSET HIGH PERFORMANCE ANSI CLASS VALVES GEAR OPERATED


NOTES:
bare stem (torque with 1.3 safety factor: 734N.m, stem: 28mm, ISO F10)


DESCRIPTION:
CASING, COMPLETE W/BRG CAPS #250-65-1003


DESCRIPTION:
CASING, COMPLETE W/BRG CAPS #253-78-1203


NOTES:
MARTIN ADJ HUB W/HDWR-$6.50//TB WOODS FLG w/INTEGRAL HUB $16.25


MISC:
NOTE: MUST ORDER SET OF COVER PLATE LINER AND FRAME PLATE LINER TOGETHER

NOTES:
NOTE: MUST ORDER SET OF COVER PLATE LINER AND FRAME PLATE LINER TOGETHER


MISC:
GLANDULA,PLATO FORRADA,F6036R26  / $1046; 10/14; OEM TO DISTRIBUTER: $1493.00 MP55=MR55


DESCRIPTION:
BEARING HOUSING ASSY COMPLETE assy not tapped


MISC:
12mm x 1.75 metric x 2" long. (1/2" long then collar then 1" long) SAME AS D023ME62


MISC:
12mm x 1.75 metric x 2" long. (1/2" long then collar then 1" long)  Same as D026ME62


MISC:
ANM PURCHASE    CHANGES UP TO D3147R38 OR D3147MR38


DESCRIPTION:
BOLT, GLAND W/NUT & WASHER, 1-37-07-01725


MISC:
TUERCA,LABERINTO,TL-061 / U/W-WARMAN PUMP 8X6 MDS7393


MISC:
OEM TO DISTRIBUTOR $15.54, 2007. SOLD 14.00 IN 2013


MISC:
WEIR #0344901130, SIZE 190mm x 90mm x 65mm Wide. Number NU2318M/ R009D-1


NOTES:
FACTORY SHIPS  8 PER SET. ACTUAL COST IS 1.50 PER SET OF 4


NOTES:
RING HEBEI SELLS 1 SET CONTAINING 4 ENDS @18.00=4.5/END


NOTES:
*ASTM-A-532-75A CLASS III TYPE A OEM US$


MISC:
RING, PISTON HOOK STYLE / ACCESSORY KIT#K086EJ0036800E6


MISC:
ACCESSORY KIT#K108FB0246800E6         *** Note  Weir now only makes this in R38


MISC:
ACCESSORY KIT#K108FB0246800E6 #1029715. OEM TO DISTRIBUTOR: $355.37


MISC:
INSERT, FRAME PLATE LINER / quote $379 to Osca 10/15.


MISC:
PLATO,BOMBA,ARMAZON FORRADA,CROMADA / CHANGES UP TO #F6041-19MA05 WHICH COMES WITH #E10026ME62 LINER STUD


MISC:
ANILLO,EXPULSOR,ALTA CROMADURA /  765.00, 01/15

DESCRIPTION:
BUSHING, THROAT, ALTA CROMADURA F6083A05

NOTES:
*WARMAN AUSTRALIAN PRICE = AUD$1,819.00 X .61 = US$1,109.00


MISC:
IMPULSOR,BOMBA,ALTA-CROMADURA / $2420.00; 01/15. OEM $3476.05 IN 2007


MISC:
EXPELLER,ALTA CROMADURA F028A05. OEM $937. TO DISTRIBUTOR $656.00, 2007


NOTES:
NOTE: FOR GILDERSLEEVE, REMOVE EXPELLER VANES "BR"


MISC:
SPACER, SHAFT  E117C21-INTMPE 162.00, 2/14


NOTES:
*ASTM-A-532-75A CLASS III TYPE A OEM US$2,803.7


NOTES:
*ASTM-A-532-75A CLASS III TYPE A OEM US$11,700.00 FOR R33 MAT.


MISC:
BEARING HOUSING ASSY., E005XLM SEVERE DUTY


DESCRIPTION:
LINER, FRAME PLATE INSERT( FERRAHENGCHANGM)


NOTES:
COMPLETE MEANS; 460V 3PHASE 125HP TEFC CLASS F MOTOR MODEL Y315M-6, STARTER WITH SWITCH FLOAT AND BRACKET FLOAT SWITCH AS WELL AS ACCESSORIES.


MISC:
TOWNLEY #F-0600-006, OEM TO DISTRIBUTOR:$2293.40. sold $1400.80 before nov.2015


NOTES:
WARMAN AUSTRALIAN PRICE = AUD$1,168.00 X .61 = US$712.00


NOTES:
ALTONA: US$1,340*A05 7/02 FOB BRASIL, oem sells for approx 3275.00


MISC:
4VCG REDUCED EYE, SUPPLY BACIS F6147A05, 0536-06145   1026980


NOTES:
SPECIAL ORDER FROM WARMAN, SELL FOR CAD$1,780.00


DESCRIPTION:
BEARING HOUSING ASSY COMPLETE 900MM not tapped


MISC:
E4032D21(FramePlate) $235. IF ORDER ONE SET FramePlate&CoverPlate, TOTAL cost $500.00


MISC:
BOLT, ADJUSTING W/NUTS; D001ME62 / SCREW, AJUSTING 3 NUT 2 WASHER D001ME62


MISC:
HIGH CHROME, ALTA CROMADURA MP55=MR55; stock#12054010 is for R26


NOTES:
X92=316SS SLEEVE, NICKLE CHROME BORON COATING (TUNGSTEN) RC59-62


NOTES:
HEBEI PRICE,  RFQ240000 IMP, IGL$5(8/16)


MISC:
W/G10026M LINER STUDS, 8 REQUIRED PER LINER SIZE M20X95


DESCRIPTION:
HOUSING, BEARING   14/12, 16/14 GAH, 20/18 GAM.


MISC:
SET CONSISTS OF: 5 SHIMS 0.1mm thk, 5 shims 0.2mm thk, 5 shims 0.4mm thk.


MISC:
SIZE: 76mm O.D. X 5.3mm CROSS SECTION  $25.99  05/11


DESCRIPTION:
BEARING HOUSING ASSY COMPLETE METRIC - 10


MISC:
LINER SEAL VOLUTE E4124S01  /sold to Nyrstar $32.00 09/15


MISC:
S01 is the only material this seal supplied in.


MISC:
GLAND SPLIT W/BOLTS & NUTS E044C23 / $68.00 , 06/12


DESCRIPTION:
1210FMR PUMP, BARE SHAFT IA05IMP/IR26LINER


NOTES:
PRICES: BARE SHAFT PUMP = us$717. ACCESSORIES (including base, grooved pulley and belt) US$370.00 Motor $580. Packing & Assembly $100.00


DESCRIPTION:
108FMR PUMP, BARE SHAFT IA05IMP/IR26LINER


NOTES:
CMPTN-"INDUSTRIAL PUMPS SALES & SERVICE"    MIN 3  MAX 6


MISC:
3/8" RATED 0 to 10000 PSIG FEMALE/FEMALE PIPE (ROUND STOCK CONFIGURATATION) P/N 2300 SERIES,  P/N 78-819-140

NOTES:
NATIONAL OILWELL (CIRCLE SEAL) NEW CHECK VALVE #2349R3PP. GENERANT IS EQUAL, SAME VALVE


MISC:
NOTE:LATEST DRAWING SHOWS 2" PIPE WELDED TO BOTH ENDS INSIDE THE PLUNGER & .906" CHANGED TO .938" GROOVE


MISC:
HOLD!!! DO NOT MANUFACTURE FROM DRAWING UNTIL REVIEW OF NECK AND STRENGTHENING OF ENDS.


DESCRIPTION:
BEARINGS, INTERMEDIATE  - P/N 65-101-980


NOTES:
*NOTE: VERIFY DWG#1035-J4 BEFORE MANUFACTURING TO SEE IF ACCORDING TO LATEST REVISION*


DESCRIPTION:
VALVE, TILTING DISC FLANGED 30" C/W DAMPENER


NOTES:
Specs:

a)      Non-revolving parallel seats

b)      Integral wedging and by-pass

c)      Cast Iron body, ASTM A-536 Ductile Iron Gates, Case & Bonnet.  Case & Bonnet shall be sealed by O-Rings.

d)      Equipped with positive operating internal device which will press disc seats firmly against body seats when valve is closed and shall release load before disc starts to move when valve is being opened

e)      ¾” NPT pipe plugs in each side of bonnet

f)       Equipped with clean out ports on each side of lower case

g)      OS&Y sliding stem

h)      Flange shall be flat face, drilled for Class 125 lbs. standard, ANSI B-16.1

i)       Equipped with packing box designed for “V”

Ring type packing and sized to allow replacement of packing without removal of actuator.

j)       Monel intermediate shaft, ANSI 304 Stainless Steel shaft coupling and gib key

k)      Gate rings shall be provided with “O” Ring Seals between gate and gate ring

l)       25 PSI working pressure

m)    Internal & External coated with Tnemec

Series 140 Pota-Pox Plus

Prime coat (1) @ 3 – 5 mils

Top coats (2) @ 4 – 6 mils / coat

Total Dry Coat Thickness: 11 – 17 mils

n)      Hydrotest prior to coating. 50 PSI for 15 min with NO leak

o)     Leakage test after final assembly (& coating) 50 PSI for 10 min. with < 1 oz/hr/inch seat dia.

p)      Standard Valve Hydrostatic Test report reqd.


MISC:
QUOTING DOUBLE OFFSET WAFER TYPE 150# CLASS, WCB, CF8M DISC, 17-4PH STEM, RPTFE SEAT WITH GEAR CHWHEEL


MISC:
SAME AS ALLIS CHALMERS  IMPELLER EXCEPT HUB THREADS ON A/C ARE DIFFERENT.


DESCRIPTION:
VALVE, ANSI B16.5 150# NAT GUM RBR 316SS KNIFE

NOTES:
PRICE IS FOB PORTLAND USA, INCLUDES 10% COMMISSION TO STU


NOTES:
409-91000-00 (Chain Wheel Op for 08235443550 ) 2.5 (Chain for Chain Wheel Op 409-91000-00)
VALVE: Butterfly; 8" & 10:, Series 250 Wafer, Carbon Steel Body, 285PSI Standard Service, 316 Stainless Steel Disc and Stem/Shaft, PTFE Bushings, Gear Operator with Chainwheel and Chain- Length of Chain Drop required to be advised 

 
	

 
	

Carbon Steel Body, 285PSI Standard Service,

 
	

 
	

316 Stainless Steel Disc and Stem/Shaft, PTFE

 
	

 
	

Bushings, Gear Operator with Chainwheel and

 
	

 
	

Chain- Length of Chain Drop required to be advised 

 

 
	

 
	

by APS P.V..


MISC:
WEDGE A105+ENP, SEAT PTFE TYPE DOUBLE DISC GATE VALVE RATED 150#, 16" FACE TO FACE.


NOTES:
***NOTE CHECK FOR REVISION BEFORE MANUFACTURING.***


DESCRIPTION:
108STR PUMP, BARE SHAFT IR08IMP/IR26LINER


DESCRIPTION:
43CR PUMP SET, BARE SHAFT R55IMP/R55 LINER


DESCRIPTION:
108STMR PUMP, BARE SHAFT IA05IMP/IR26LINER


DESCRIPTION:
1614TUR BARE SHAFT PUMP, C/WITH R26 WET END.


MISC:
BASE, GUARD, V.D. PULLEYS, BELTS, COMPANION FLANGES


NOTES:
TOOLING COST FROM HEBEI ON FIRST ORDER, PRICE INCLUDES SUC LINER #36325


MISC:
NAT RUBBER LINERS, A05 IMPELLER & THROAT BUSHING WITH C26 ALLOY SLEEVE

NOTES:
* PRICE INCLUDES CR BASE, PULLEYS/BELTS/GUARD


MISC:
4 LUGS INSTEAD OF THE REGULAR 3, MACHINING IS DIFFERENT


MISC:
SAME AS E4147A05 EXCEPT FOR BCK FLD HUB AND EYE HUB EXPELLER VANE CHANGES PER 1554-C02


DESCRIPTION:
65QVSPM PUMP, BARE SHAFT C/W C.FLNGS 316SS 2' SUC PIPE


MISC:
SAME AS A/C #98-431-641-503 EXCEPT HUB THREADS ARE 2 LEAD IN ACME SIZE 2-1/2"-4 THRDS/INCH


MISC:
NOT SURE IF WILL INTERCHANGE WITH A/C. SAME AS 503566


MISC:
ACTUAL GOULDS PUMP FR WAJAX 4832.00 CAD / GOULDS TIGHT IN USA LOW MARGIN!!!

NOTES:
BIG BORE BOX FULL DIA IMPELLER AND NO SEAL OR PACKING


MISC:
6 SEULEMENT FOR ELEMENT N-EUPEX H125 S140


DESCRIPTION:
REPELLER COVER WITH WELDED ON COOLING JACKET


DESCRIPTION:
REPELLER COVER PLATE COATING TUNGSTEN CARBIDE


NOTES:
* PRICE INCLUDES CR BASE, PULLEYS/BELTS/GUARD SELL $13,424.00 + $6,500 ACCESS


MISC:
HUB THREADS ARE 1-1/4" - 7THREADS/INCH DOUBLE LEAD  $430.00 01/12


MISC:
P/N 48951  $1064.00 09/13  SAME AS 48911 EXCEPT FOR MATERIAL TYPE


NOTES:
HEBEI ASKS FOR DRAWING TO CONFIRM WHERE NOT TAPPED


MISC:
NOTE: SAMPLE REQUIRED TO COMPLETE DRAWING


MISC:
REV#1, CHANGED W/R DIAMETER TO 19.495" +.002 - .000


MISC:
16" HIGH X 17-1/2" DIA. 3-/14 BEARING CAVITY.


MISC:
17-1/2" DIA. X 16" HIGH X 15" DISCHARGE WITH 3-1/4" BORE FOR BEARING.


DESCRIPTION:
SLEEVE, SHAFT NI-HARD 280/340 BHN, 38884


DESCRIPTION:
PLATE, CLAMP / ABRAZADERA,DE PLATO, 38163


MISC:
FILL IN 12135-0 MATERIAL: HI-CHROME, LOW CARBON A33


DESCRIPTION:
LINER, GLAND SIDE 5X4; 504826  / GLANDULA, REVESTIMIENTO HULE MS


DESCRIPTION:
CASE, SUC. SIDE STD /CAJA,SUCCION,503179


DESCRIPTION:
CUBIERTA,BALINERA EXTERNA /COVER, OUTBOARD BEARING


MISC:
SAME AS A/C #98-431-651-501 EXCEPT HUB THREADS ARE 2" - 5 ACME R.H. DOUBLE ENTRY

NOTES:
KAN WEE PRODUCES ONLY A05 MATERIAL, FOR RUBBER IMPELLER ORDER FROM PIPSA


MISC:
SAME AS A/C #98-231-120-501 EXCEPT MATERIAL TYPE


MISC:
SAME AS A/C#98-231-134-501 & DENVER #51825  EXCEPT MATERIAL


NOTES:
$1087.50 IS SPECIAL PRICING TO NYRSTAR ONLY. KAN WEE PRODUCES ONLY A05 MATERIAL, FOR RUBBER IMPELLER ORDER FROM PIPSA


DESCRIPTION:
SEAL, MECHANICAL   /  SELLO MECANICO,10K13


MISC:
SAME AS 38754 EXCEPT IT HAS ACME THREADS.

DESCRIPTION:
IMPELLER, 21" DIA 9-1/8 EYE, 3-1/2"-6UN-2A thrd.


MISC:
SAME AS 38751, DWG #1-6605 EXCEPT HUB THREADS ARE V TYPE.


MISC:
SAME AS 22640 & 49861 EXCEPT MATERIAL CHANGE AND WITH EXPELLER VANES.

NOTES:
SELLING PRICE FOR G30 PARTS IS US$41/POUND


MISC:
FORRO,TAPADERA PLATO, F6018MP55  / GLAND, PLATE LINERD109S50; (OEM PRICE HEMMEN). Quote to Oscar $905.60, 09/15; OEM $1602, DISTRIBUTOR $1121, 2009


MISC:
NOTE: MUST MODIFY DWG #4144-C02 FOR HEAVY CUT WATER


MODEL:
MK II & III GRP IIMK II & III GRP IIMK II & III GRP IIMK II & III GRP II


MISC:
COMES IN BOX OF 2 FROM FACTORY      RFQ51410


DESCRIPTION:
43CM PUMP, BARE SHAFT, ALL METAL WET END

NOTES:
JACKY PRICE INCLUDES PUMP BASE, COMPANION FLANGES & CV MOUNT ACCESSORIES.


MISC:
NOTE: USE SEAL #U55124S01 AND CUT TO SIZE. SEE JOHN FOR DIMENSIONS.


NOTES:
NOTE: BUY C21 MATERIAL SLEEVE AND HAVE CERAMIC COATED AT MESA.


MISC:
SIZE = 19 X 19 X 455 EACH PACKING RING. 4/SET.


DESCRIPTION:
RUBBER LINED IMPELLER COMPLETE WITH COMPANION FLANGES AND GASKETS


DESCRIPTION:
150EL PUMP, BARE SHAFT C/ WITH IA05 WET END


DESCRIPTION:
IMPELLER, FILLED VANES QUENCH FOR 700BRN


DESCRIPTION:
VALVE, BTRFLY 5" LG, VTNRS150#ANSI.EPXCGROP


MISC:
272 m3/h @ 91m TDH 1450 RPM WITH 67% EFF.


MISC:
RESISTANT TO ABRASSIN, VULCANIZED NATURAL RUBBER 55F, NO MOTOR, NO TRANSMISSION

DESCRIPTION:
PUMP, BARE SHAFT C/W TEFC 15HP MTR 254T 1765


MISC:
NOTE: MAKE FROM U55060S01 JOINT RING BY CUTTING AND MAKING SMALLER.


DESCRIPTION:
65QVMR PUMP, BARE SHAFT IA05IMP/IR26LINER


NOTES:
QUOTED PRICE FOR 90" SHAFT OF $907.50 NET


NOTES:
MOTOR #Y-6/440V/60HZ/45KW COMPLETE WITH CV MOUNT


MISC:
NOTE: IMPURITY A33 MATERIAL IS THE SAME AS A51


DESCRIPTION:
VOLUTE LINER FRONT & HALF , 90 DURO URETHANE #3


DESCRIPTION:
LINER REAR & VOLUTE HALF, 90 DURO URETHANE #4


MISC:
USE WITH 200ZJIA60, 200ZJIA65, 150ZJIA65, 200ZJIA70


DESCRIPTION:
VALVE, 10" KNFGT 310SS TG10-HYDL-174EPDM EQUAL


DESCRIPTION:
VALVE, BTRFLY 22" LG, VTNRS150#ANSI.EPXCGROP


DESCRIPTION:
VALVE, BTRFLY 24" LG, VTNRS150#ANSI.EPXCGROP


DESCRIPTION:
SHAFT ASSY, C/WITH NUTS-WASHERS 40CR 60391937


DESCRIPTION:
SHAFT ASSY, C/WITH NUTS-WASHERS 40CR, 60366848


MISC:
M24X180MM STUD M24 NUT M24 WASHER: COARSE THREAD, MILD STEEL


MISC:
HARD SURFACED WITH PLEXUS BORIDE CARBIDE ALLOY


MISC:
F6 PIN, SEAT: PRESSURE SEALING INTEGRAL SEAT OVERLAY STL

DESCRIPTION:
CHECK, VALVE TLTNG DSC ANSI B16.34 WCB+STL DISC


DESCRIPTION:
BFV, 36" WFR, GNRL.SRVC, A48, EPDM, 316SS, GROP.


DESCRIPTION:
BFV, 4" WFR, GNRL.SRVC, A126, EPDM, 316SS, GROP.


DESCRIPTION:
BFV, 6" WFR, GNRL.SRVC, A126, EPDM, 316SS, GROP.


DESCRIPTION:
BFV, 8" WFR, GNRL.SRVC, A126, EPDM, 316SS, GROP.


DESCRIPTION:
BFV, 10" WFR, GNRL.SRVC, A126, EPDM, 316SS, GROP.


MISC:
BOART SLINGER MS 502974, PHTSA#52-2; shaft DIA 1-1/2 IN; DEFLECTOR LADO ESTOPERO


MISC:
SAME AS DENVER EXCEPT HUB THREADS ARE 2-1/2" - 4 THDS/IN ACME RH.

NOTES:
KAN WEE PRODUCES ONLY A05 MATERIAL, FOR RUBBER IMPELLER ORDER FROM JACKY


MISC:
ANNIN PLUG TYPE MODEL 1660 CONTROL VALVE


NOTES:
B073M Tyler $100 06/16 EJE; Elastomex $457


NOTES:
HEBEI DOES NOT MAKE!!!! WIER $4.62 IN 2009


NOTES:
TYLER:$864 05/17; ELASTOMX $979 06/17. 720.00NYSTR DDG 820.00;  air cost for 22pc to laredo $5650


MISC:
ALTERNATE CAST MATERIAL HK40, LURGI DWG #D70142001L00001


DESCRIPTION:
PLUNGER, 6.25" HVY REBUILT  - P/N 16-212-008


DESCRIPTION:
WASHER-THRUST FOR RIGHT HAND HOUSING ASS., #109942 HGM


DESCRIPTION:
HOUSING SEC. GEAR STD.. P/N21000A, EIMCO P/N SA-UN-11566-


MISC:
IMPELLER  /SAME AS ALLIS CHALMERS #98-330-286-508, PHTSA#5037


MISC:
SHAFT, ASSEMBLY, 503008 / VENDOR ID 10027295

NOTES:
INTMPE $2793.10, 04/15. 1. "shaft assy 12101008 we can easily have Grosvin make a drawing and produce it at much lower cost, no tooling required."John 8/18


MISC:
IMPULSOR HULE RBR MS27001 ,504828 / SAME AS ALLIS CHALMERS #98-039-047-501. TO OSCAR $791.00. TO NYRSTAR $895.00. SOLD$530,03/13; PHTSA#542

NOTES:
SOLD $560.00 (Jan 2018). "12102004 do not offer this item. There is no way to make profit on it even if we produce it ourselves. Tooling cost would be more than $8,000.00 and volume is minimal." John 08/18


DESCRIPTION:
SLINGER, INBOARD  /  SLINGER, INTERNO  503279


MISC:
Pump: aluminum diaphragm, BUNA NRV Ball: Neoprene   ( 3" port inlet and discharge, 21.6" suction lift dry, 105 PSI/7 bar, 1/2" air inlet

DESCRIPTION:
3" Air operated double diaphragm pump (243 gpm)


DESCRIPTION:
SURGE CHAMBERS  WITH SEATS/BALLS, SP16003


MISC:
IMPELLER FOR THIS SHAFT IS 19.375" DIA. SHAFT, 600#

NOTES:
OLD PART NUMBER 41477, Sell $738 (10/16)


DESCRIPTION:
TAPADERA /COVER, RADIAL BEARING I.E. 38245


MISC:
AN-17 HARDWARE ITEM. Customer can buy in any local bearing house


DESCRIPTION:
BEARING, COLUMN 21153 / COLUMNA,BALINERA


DESCRIPTION:
IMPELLER, 22" DIA DIA RH #046515G01G1228


NOTES:
Tyler $1.50 06/17 ANILLO O-DEL IMPULSOR; Elastomex $11


NOTES:
SAME DRAWING AS STOCK NUMBERS 610875, 610835 EXCEPT DIAMETER


NOTES:
Tyler B061 $8 06/16 TUERCA CANDADO DEL LABERINTO


NOTES:
Tyler B089-10 $3 06/16 SELLO DE RODAMIENTO


NOTES:
Tyler $70 06/16 
/ FRONT LANTERN RESTRICTOR RING 3/2 PUMP SIZE


MISC:
ACME 3/4" PITCH SINGLE LEAD THREAD RH X 5.25" DIA.

DESCRIPTION:
IMPELLER, 39" DIA. X 6" THK X 16" EYE 4 VANES


DESCRIPTION:
THRUST BEARING BRACKET FOR LR HORIZ. SPLIT CASE(NO BEARINGS)


DESCRIPTION:
IMPELLER, 20" DIA,M 400BHN 5V W/RING - P/N 314995


DESCRIPTION:
IMPELLER, 20" DIA 400BHN 8V W/RINGS - P/N 312727


DESCRIPTION:
IMPELLER, 19-1/2" DIA 430BHN 8V W/RINGS - P/N 312727


DESCRIPTION:
IMPELLER, 21-1/2" DIA 400BHN 8V W/RINGS - P/N 312727


DESCRIPTION:
SEAL CAGE SPLIT LANTERN RING  - P/N 312901


DESCRIPTION:
HOUSING, BRACKET & CAP, BEARNG  - P/N 410465


DESCRIPTION:
SHAFT, 10X12DSH STD ALL SEALS 3.50" DIA.


NOTES:
DRAWING REQUIRED TO SUPPLY (QUOTE: 511042-113990)


NOTES:
DRAWING REQUIRED TO PRODUCE, ESTIMATED P.T.A.D. IS 1W


MISC:
SAME AS 610824 EXCEPT FOR ADDED LABYSEAL

DESCRIPTION:
HOUSING, BRACKET & CAP, BEARNG C/W LABYSEAL - P/N G-4316

NOTES:
EST. PROD.TIME IS 8-10 WKS. FIRST ORDER. (37031 QTY. 11) **PRICE SOLD TO WINDALCO $1422.00(INT.37014-12964 QTY.1)


MISC:
SEE 504830 FOR THE SAME PRICES, PHTSA#5041-A   GLANDULA,REVESTIMIENTO HULE LINER, 504826


DESCRIPTION:
OPEN IMPELLER W/RINGS, PATTERN 68211, DIA:25"X23.03"


MISC:
ACCESSORY KIT#K032CF0016800E6. MANGA DEL EJE (Pump Size 3/2 ,4/3)


NOTES:
Tyler $80 06/17 REVESTIMIENTO DEL PLATO DECUBIERTA; Elastomex $254 06/17


NOTES:
Tyler $139 06/17 IMPULSOR (Pump Size 2/1.5); ELASTOMX $462 06/17. 12/17 Won quote over 9% and 3 wks faster


Tyler $139 06/16  IMPULSOR    NOTE: FOR GILDERSLEEVE, REMOVE EXPELLER VANES "BR"


NOTES:
Tyler $30 06/17,Elastomex $117 06/17. sold to Plantel Los Angeles $161.25, 05/18


MISC:
ACCESSORY KIT#K015BG0016800E6. ESPACIADOR DE LA FLECHA


NOTES:
Tyler $50 06/17 ESPACIADOR DE LA FLECHA; Elastomex $219


NOTES:
Tyler $90 06/17 FRAME PLATE LINER INSERT, SOLD TO PLANTEL LOS ANGELES $273.75, 05/18


DESCRIPTION:
IMPELLER, 15" DIA 400BHN 3V C/W W/RING - P/N 319181A


NOTES:
Tyler $600 06/16 VOLUTE LINER (Pump Size 3/2)


MISC:
STUD IS M30 X 125MM LONG, COMPETITOR $168.75 04/17

DESCRIPTION:
STUD, MOTOR SUPPORT C/W 2 M30 NUTS D066ME62


NOTES:
Tyler $120 6/17 IMPELLER; ELASTOMX $326, 06/17.


MISC:
FRAME C, 2030RPM (SLURRY); sold $632 02/14

NOTES:
Tyler $260 06/16 VOLATE LINER, SOLD $411.25 TO PLANTEL LOS ANGELES, 05/18


NOTES:
Tyler $N/A 06/16 TORNILLOS PARA EL INSERTO DELREVESTIMIENTO


MISC:
Per DL Sept20,2018: supply 5 vanes which is better and interchangeable with 3 vanes. No 3 vanes in the market.  B1127 is 5 vanes


MISC:
PRENSAESTOPA- CAPACIDAD 37 MT CUBICOS/HR


NOTES:
Tyler $820 06/16 IMPULSOR (6/4 Pump Size)


DESCRIPTION:
RING, DISCHARGE JOINT 54-001-05115 B1132HS01


MISC:
FOR DIRECT DRIVE MOTOR MOUNT WITH COUPLING (FOR ACID SERVICE 316L PRICE IS $6300 COST, SELL=$10,712)

DESCRIPTION:
PUMP, BARE SHAFT C/WITH ACCESS. + CPLNG  - P/N 80MPVLHP36

NOTES:
SOLD 2 PUMPS TO WINDALCO JAMAICA 6/08 $6882.50


DESCRIPTION:
SLEEVE & BEARING ASSY., UPPER  - P/N 80MPV80-2


DESCRIPTION:
NUT, UPPER BRNG ASSY. LOCK  - P/N 80MPV80-10


DESCRIPTION:
NUT, LOWER BRNG ASSY. LOCK  - P/N 80MPV80-4


DESCRIPTION:
IMPELLER, 19-3/4" DIA. 400BHN 5V W/RING - P/N 314995


DESCRIPTION:
IMPELLER, 21" DIA., 400BHN 5V W/RING - P/N 314995


DESCRIPTION:
IMPELLER, 19" DIA., 400BHN 5V W/RING - P/N 314995


DESCRIPTION:
RING, WEAR CASING STAGE #1  - P/N A-32658


DESCRIPTION:
HEAD, IMPELLER ITEM #6  - P/N PD2-3.68KGM2


DESCRIPTION:
IMPELLER, 23-1/2" DIA W/O BACK VANES - P/N E00127E012-1228


DESCRIPTION:
BOWL ASSY. C/W STRAINER, DEEP WELL - P/N 14JKH 11stage


DESCRIPTION:
IMPELLER, 26 1/2" DIA., 400BHN 5V W/RING - P/N 341995


MISC:
ANILLO O - PARA MANGA DEFLECHA (CAPACIDAD 37 MT

NOTES:
Tyler $7.65 06/17. 25MP40-7, 47mm X 2.6mm cross section; 4.20, $9.00 TO ESSO  (CAPACIDAD 37 MT)


MISC:
DESIGNED FOR CHESTERTON CS-269428 CARTRIDGE SEAL & NM06500R109800 SPIRAL TRAC


NOTES:
Pricing as per Johns quote(511036-113107) on Jan23/11


DESCRIPTION:
BOWL, BOTTOM #16 (W/GLASS ENAMEL) - P/N 9C610-159


DESCRIPTION:
BEARING, BOWL MIDDLE  #12 - P/N 10RJC-608


DESCRIPTION:
ADJUSTING NUT  (ITEM #3) - P/N 8MPVTP-006/36


DESCRIPTION:
MOTOR YLB200-2-4 (ITEM #5)  - P/N 37KW/4P


DESCRIPTION:
STUFFER PACKING CAP  (ITEM# 8) - P/N 6MPVTP-36


DESCRIPTION:
STUFFER PACKING BOX  (ITEM #9) - P/N 6MPVTP-32


DESCRIPTION:
MOTOR SHAFT  (ITEM #16) - P/N 10MPVTP-001A


DESCRIPTION:
SHORT PIPE  (ITEM #18) - P/N 10MPVTP-500/194F


DESCRIPTION:
IMPELLER, 17" DIA. 3V 400BHN - P/N 411744


DESCRIPTION:
DISCHARGE PIPE  (ITEM #22) - P/N 10MPVTP-400/194F


DESCRIPTION:
BOWL, UPPER  (ITEM #24) - P/N 10MPVTP-607A


DESCRIPTION:
BEARING  UPPER  (ITEM #25) - P/N 10MPVTP-604/36


DESCRIPTION:
SHAFT, IMPELLER  ITEM #26 - P/N 10MPVTP-603/36A


DESCRIPTION:
BOWL, MIDDLE  (ITEM #27) - P/N 10MPVTP-607


DESCRIPTION:
WEAR RING  (ITEM #31) - P/N 250MPVTP130-605


DESCRIPTION:
BEARING BOTTOM  (ITEM #32) - P/N 10MPVTP-611/36


DESCRIPTION:
BOWL BOTTOM  (ITEM #33) - P/N  10MPVTP-610


DESCRIPTION:
STAINER  (ITEM #34) - P/N 8MPVTP-700/6NPT


MISC:
SEAMLESS 0.06-0.13% CARBON, 0.025% PHOSPHORUS MAX, 0.006% SULPHUR MAX. 1.505 MAX O.D.

DESCRIPTION:
TUBE, 1.5" o.d. X 23' long x 2.77 min.wall.thkns. seamless A-214-5-8T

NOTES:
FREIGHT PER TUBE TO KINGSTON AS OF 5/9/2012 = $7.60 EACH


DESCRIPTION:
TUBE, 1.5" o.d. X 21' long x 2.77 min.wall.thkns. seamless A-214-5-8T


DESCRIPTION:
TUBE, 1.5 X 1.65mm X 30' DPLX SS GRADE 2304


NOTES:
No notes on "Analisis de Refracciones Para Bombas


MISC:
IMPELLER END OF SHAFT DRILLED AND TAPPED FOR M24 STUD.


MISC:
MODIFIED TO SUIT 80MPLHPA42M PUMP IN OPERATION AT ESSO COLD LAKE ALBERTA


MISC:
8 inches high by 20 inch diameter      510 mm


MISC:
JOINT RING DISCHARGE; E4132LS01 /  $24, 10/14


MISC:
ASSEMBLY FOR SHAFT(503532) & SLEEVE(503539)


MISC:
E4032D21(FramePlate) $235. IF ORDER ONE SET FramePlate&COVERPlate, TOTAL cost $500.00


MISC:
Tyler $69 06/17 (D046) RETENEDOR DE GRASA


NOTES:
Tyler $6.50 06/16 B046 RETENEDOR DE GRASA


MISC:
SAME AS MK #21196-00-500,  P/N 39042 ACME THREAD


NOTES:
Not in competitors price list, ELASTOMEX $55 06/17; WEIR $97.81 IN 2009


NOTES:
Tyler $43 06/16 ANILLO JUNTA DE SUCCION; Elastomx $52


DESCRIPTION:
PLATE, COVER PLATE BOLT W/2 NUTS E4015ME66


NOTES:
Tyler $10 06/16 FRAME PLATE BOLT - 1 NUT


NOTES:
Tyler $15.00 06/16 C06210D81A LABYRINTH DRIVE END


MISC:
BEARING, TPR ROLLER #90268 100X60" #2 DR. 22141  / 477 TIMKEN CONE. 90268 IS ASSY NUMBER. / NYSTAR 1024835

DESCRIPTION:
BEARING, TPR ROLLER / RODO,BALINERA,CONJUNTO


DESCRIPTION:
SEAL, DOUBLE MECHANICAL CRO TYPE SC/FACES


NOTES:
Tyler $10 06/16 CLAMP BOLT - 1 NUT; Elastomex $51


MISC:
B027M = HX HD  SET SCREW 10mm X 25mm Long


MISC:
SIZE: 12X70MM STUD WITH NUTS.  (FROTH PUMP)


MISC:
GLANDULA, LADIAL FORRADA SUCCION  504830

NOTES:
IGL$549(5/17). TT-INVENTORY QTY3- REDUCED TO SELL $410.00.


MISC:
TORNILLO DEL REVESTIMIENTO.  Warman 2/1.5 MOD BAH


DESCRIPTION:
THROAT BUSH F6083R26  /   CASQUILLO,ANGOSTURA,CROMADA, F6083R26


DESCRIPTION:
LINER, COVER PLATE DAHF3017R55  1-37-05-01559


DESCRIPTION:
IMPELLER, 18-1/2" DIA 3V 400BHN W/RING - P/N 314992


DESCRIPTION:
SEAL CAGE SPLIT LANTERN RING  - P/N 314084


DESCRIPTION:
BOWL, MIDDLE  (ITEM #33) - P/N 300MPVTP220-607


DESCRIPTION:
BEARING, DOWN (ITEM #38)  - P/N 300MPVTP-611


DESCRIPTION:
VALVE, RELIEF SET 100PSI  - P/N J4-J035-DR


DESCRIPTION:
SHAFT, IMPELLER (ITEM #32)  - P/N 300MPVTP220-603


DESCRIPTION:
BALL VALVE,  (13CR, WRENCH THREAD)  1/2"


DESCRIPTION:
BALL VALVE,  (13CR, WRENCH THREAD)  3/4"


DESCRIPTION:
SLEEVE, CENTRE SHAFT 420-500Bhn - P/N A-31106


MISC:
USE WITH 100ZJIA50, 150ZJIA42, 150ZJIA50


MISC:
USE WITH 100ZJIA50, 150ZJIA42 & 150ZJIA50


MISC:
$65.00 7/14. P50 is imported material, need 20 days. C21 will be 10 days.

NOTES:
Tyler $34 06/17 "Anillo' RESTRICTOR DE LINTERNA; Elastomex $92


NOTES:
Tyler $70 06/17 REVESTIMIENTO DE CARCAZA


NOTES:
TYLER$82 06/17; elastomex $269, note: quote $149/ea to make total sales on quote less than $4200. normal price $159


DESCRIPTION:
HOUSING, BRACKET & CAP, BEARING - P/N G4316


MISC:
MANGA DE EJE. Bomba de alimentacion al ciclon warman 8/6


DESCRIPTION:
COUPLING, MOTOR SHAFT  - P/N 80MPVE80-21


DESCRIPTION:
BOWL ASSY. & DISCHARGE HEAD, 6 STAGE 622013 - P/N 300MPVTP160-1

NOTES:
COST PRICE INCLUDES DISCHARGE HEAD, PUMP COMPLETE


DESCRIPTION:
BOWL ASSY. ONLY, 6 STAGE  - P/N 300MPVTP160-1


NOTES:
DRAWING MUST BE MADE TO FILL AN ORDER!!!!!!!


NOTES:
NOTE: A DRAWING IS REQUIRED TO COMPLETE AN ORDER.


NOTES:
NOTE: DRAWING IS REQUIRED TO FILL ORDER.


DESCRIPTION:
IMPELLER, 25" DIA., 400BHN 5V W/RING - P/N 314995


DESCRIPTION:
IMPELLER, 21-5/8" DIA 5V 400BHN W/RING - P/N 314995

NOTES:
26" DIA. MAX. IMPELLER TO BE STATIC BALANCED ****sold by corrosion products @ $1975.00????******


DESCRIPTION:
IMPELLER, 23 " DIA., 400BHN 5V W/RING - P/N 314995


DESCRIPTION:
IMPELLER, 22" DIA 5V 400BHN  W/RING - P/N 314995


DESCRIPTION:
IMPELLER, 26" DIA., 400BHN 5V W/RING -  P/N 314995


DESCRIPTION:
IMPELLER, 9" DIA W/RING-BEVEL - P/N 262146


DESCRIPTION:
IMPELLER, 9-1/4" DIA 400BHN W/RING-BEVEL - P/N 262146


DESCRIPTION:
IMPELLER, 9-1/2" DIA 400BHN W/RING-BEVEL - P/N 262146


DESCRIPTION:
IMPELLER, 9-3/4" DIA 400BHN W/RING-BEVEL - P/N 262146


DESCRIPTION:
IMPELLER, 10-3/8" DIA W/RING-BEVEL - P/N 262146


DESCRIPTION:
IMPELLER, 10-3/4" DIA W/RING-BEVEL - P/N 262146


DESCRIPTION:
IMPELLER, 11-3/4" DIA W/RING-BEVEL - P/N 262146


DESCRIPTION:
CASING, WITH STFNG BOX, MODIFIED, 10X12S - P/N 412214-5


DESCRIPTION:
IMPELLER, 21" DIA 400BHN 8V W/RINGS - P/N 312727


DESCRIPTION:
SLEEVE, SHAFT MS SPCL DUTY / CAMISA,EJE MS


DESCRIPTION:
COVER, RADIAL BRNG O.B. 400BHN - P/N G-6190


DESCRIPTION:
COVER, CASING SPLIT REMOVABLE  - P/N 412481


DESCRIPTION:
RING, CASING - P/N SK2138-AJ - P/N 213719


DESCRIPTION:
IMPELLER, 22-3/8" DIA 400BHN 8V W/RINGS - P/N 312727


DESCRIPTION:
IMPELLER, 8-1/2" DIA W/RING - P/N G-6401R


DESCRIPTION:
IMPELLER, 21-1/2" DIA. 400Bhn  3V W/RING - P/N 314992


DESCRIPTION:
IMPELLER, 9-1/2" DIA 400BHN W/RING - P/N G-6401R


DESCRIPTION:
BUSHING, RUBBER , BS-2-3/16 (60 DUROMETER)


NOTES:
QUOTED PRICE IS FOR A COMPLETE GLAND SET( 2 HALFS), Sold $590(qty1) 8/18


MISC:
SEE DWG 2065-C2 FOR MATERIAL & TECHNICAL DETAILS


DESCRIPTION:
PLATE, SINGLE SCREEN CENTER,  GRADE 6020/85

NOTES:
Competition SET-PANEL,MOD, Central 1 OF 20 (FULL SET) $380 EA X 20=$7600


NOTES:
Competition Part # C16.1X50.1TN19081219FD30 (Set 5 Each $2100/ea)


MISC:
GOULDS 400 HP, Curve# 18BHC, PUMP, GOULDS(TURBINE ONLY)VIT-FF 3 STAGE SER:485999-1-2Y3 MOD.14X18BHC

NOTES:
Min 3 Max 6  12 month usage (0     ****** 70% increase on the cost for next orders 27th March 2019 ML*****


NOTES:
Min 1 Max 2  12 month usage SIC$3154.73(QTY2-12/17)


DESCRIPTION:
IMPELLER, 9-3/4" DIA 400BHN W/RING  - P/N G-6401R


DESCRIPTION:
IMPELLER, 10-3/8" DIA W/RING - P/N G-6401R


DESCRIPTION:
SCREW, IMPELLER NUT LOCKING - P/N G-6402A


DESCRIPTION:
HOUSING, BRACKET & CAP, BEARING - P/N 311019


DESCRIPTION:
HOUSING, BRACKET & CAP, BEARING  -  P/N 312390


DESCRIPTION:
SLEEVE, SHAFT STD LNGTH 10-1/8" - P/N 312543


DESCRIPTION:
IMPELLER, 13-1/2" DIA  W/RINGS - P/N 313670


DESCRIPTION:
IMPELLER, 14-5/8" DIA W/RING - P/N 313670


DESCRIPTION:
IMPELLER, 8-3/4" DIA. 1ST STAGE CCW - P/N G-7457


DESCRIPTION:
BOLT & NUT, GLAND SWING 1/2" - P/N 310340


DESCRIPTION:
SLEEVE, SHAFT STD LENGTH 6" - P/N 312129


DESCRIPTION:
IMPELLER, 12-1/2" DIA 400BHN 3V C/W BVL RNG - P/N 319181A


DESCRIPTION:
BEARING, ROLLER THRUST W/DRIVE SHAFT EXT.


DESCRIPTION:
GEARBOX SUMITOMO  - P/N EHYJ-B4110-Y-Y3-74


DESCRIPTION:
SCREW, 9" DIA X 4'-10' LONG SCREW W/3/16"


DESCRIPTION:
PACKING SETS, FLUID END  - P/N GAS-102854-000


DESCRIPTION:
COUPLING, SHAFT 100' DIA. - P/N D26444/8A


DESCRIPTION:
IMPELLER, 16" DIA 400BHN 3V - P/N 319181A


DESCRIPTION:
NUT, ADJUSTING  (ITEM #3) - P/N 14MPVTP-006/30


DESCRIPTION:
HEAD, DISCHARGE (ITEM #6) - P/N 6MPVTP-104/32


DESCRIPTION:
GLAND, PACKING  (ITEM #7) - P/N 6MPVTP-109/32


DESCRIPTION:
BOX, STUFFING  (ITEM #8) - P/N 6MPVTP-103/32


DESCRIPTION:
MOTOR SHAFT  (ITEM #15) - P/N 10MPVTP-001/30.1


DESCRIPTION:
COUPLING (CONNECT MOTOR SHAFT) (ITEM#16) - P/N 6MPVTP-110/32


DESCRIPTION:
SHORT PIPE, IN/OUT ENAMELED  (ITEM #17) - P/N 12MPVTP-500/194*2F


DESCRIPTION:
SPIDER BEARING (ITEM#18) - P/N 6MPVTP-112/32 40"


DESCRIPTION:
COUPLING, 40D  (ITEM #21) - P/N 6MPVTP-117/32


DESCRIPTION:
DISCHARGE PIPE,  194*1000 (ITEM #22) - P/N 6MPVTP-118/32


DESCRIPTION:
DISCHARGE PIPE, 194*2500  (ITEM #24) - P/N 6MPVTP-120/32


DESCRIPTION:
GASKET, 16D  (ITEM #27) - P/N 6MPVTP-121/32


DESCRIPTION:
DISCHARGE PIPE,  (ITEM #29) - 12MPVTP*400/194*2F


DESCRIPTION:
BOWL, TOP DISCH.  (ITEM #30) - P/N 300MPVTP-607E


DESCRIPTION:
BEARING, UPPER (ITEM #31) - P/N 300MPVTP-604


DESCRIPTION:
BEARING, BOWL  (ITEM #34) - P/N 300MPVTP-608


DESCRIPTION:
CONE SLEEVE  (ITEM #35)  - P/N 300MPVTP-609


DESCRIPTION:
RING, WEAR (INNER HOLE) (ITEM #37)  - P/N 300MPVTP220-605


DESCRIPTION:
BOWL, BOTTOM  (ITEM #39) - P/N 300MPVTP-610


DESCRIPTION:
BOWL ASSY. W/SS IMPELLER - P/N 100MPVTP15


DESCRIPTION:
BUSHING, INTERSTAGE DIAHPRAGM  - P/N 311343


DESCRIPTION:
INTERSTAGE DISPHRAGM BUSHING  - P/N 311342


DESCRIPTION:
BOLT & NUT, GLAND SWING TYPE  - P/N G-1254


DESCRIPTION:
IMPELLER, 14-1/4" DIA 3V W/RING  - P/N G-6831


DESCRIPTION:
IMPELLER, 15-1/4" DIA 3V W/RING  - P/N G-6831


DESCRIPTION:
IMPELLER, 16" DIA 3V W/RING  - P/N G-6831


DESCRIPTION:
IMPELLER, 16-1/2" DIA 3V W/RINGS - P/N G-6831


MISC:
MAKE SLEEVE DWG FROM SHAFT AND GLAND RING DRAWINGS


DESCRIPTION:
IMPELLER, 16-1/2" DIA., 400Bhn 3V W/RINGS  - P/N 314992


DESCRIPTION:
IMPELLER, 18" DIA., 400Bhn 3V W/RINGS  - P/N 314992


DESCRIPTION:
IMPELLER, 20" DIA., 400Bhn 3V W/RING - P/N 314992


DESCRIPTION:
IMPELLER, 23" DIA., 400Bhn 3V W/RING  - P/N 314992


DESCRIPTION:
IMPELLER, 19-1/2" DIA 400BHN 3V W/RINGS - 314992


DESCRIPTION:
TRANSITION PIECE, BOWL ASSY. TO CUSTOMER COLUMN - P/N 100MPVTP15


DESCRIPTION:
IMPELLER, 18" DIA 400BHN 8V W/ RINGS - P/N 312727


DESCRIPTION:
IMPELLER, 18-3/8" DIA 400BHN 8V W/RINGS - P/N 312727


DESCRIPTION:
IMPELLER, 18-3/4" DIA 400BHN 8V W/RINGS - P/N 312727


DESCRIPTION:
COLLAPSING TOOL, ROUND SHANK, ROUND COLLAR


DESCRIPTION:
VALVE DISC LP VALVES ONLY  P/N 1002-2255-00


DESCRIPTION:
NIPPLE, COLUMN 10"D.X59-3/4"LG., ORDER ON REQUEST BY END USER 11/08


DESCRIPTION:
NUT, 13NC -2 BRASS  1-15/16"  HW100912839  U/W-JOHNSTONE PUMP 250HP  1745254-SULZER


DESCRIPTION:
RING, LANTERN TURBINE PUMP 250HP MODEL TB-27382-83


DESCRIPTION:
GLAND,  PACKING  SPLIT  #2619-1  U/W-JOHNSTONE  VERTICAL PUMP  250HP.  SER: JY17452-54


DESCRIPTION:
SHAFT / EJE CALIBRADO,ACERO INOXIDABLE C1045


NOTES:
MIN 6, MAX 12, 1 YR Use 2, EBS$145 (QTY4-12/17). NOTHING PURCHASED SINCE JAN 2017


DESCRIPTION:
TUBE, 1.5" X 1.65mm X 23' LONG GRADE 2304 SS


DESCRIPTION:
TUBE, 1.5" o.d. X 30' long x 2.77 min.wall.thkns. seamless A-214-5-8T


NOTES:
Tyler $190 06/16 REVESTIMIENTO DEL PLATO  (Pump size 4/3), $369 4/17.


DESCRIPTION:
IMPELLER, 22-1/2" DIA 400BHN 8V W/RINGS - P/N 312727


DESCRIPTION:
IMPELLER, 20-1/2" DIA., 400BHN W/RING - P/N 213717B


DESCRIPTION:
PUMP, BARE SHAFT VERTICAL 500gpm @ 40' @ 900rpm

NOTES:
REPLACES HAZELTON VNR 3-11 PUMP LENGTH 1298MM


MISC:
MODIFIED FOR INPRO SEAL #VBXXD-HH 65mm x 110mm MATERIAL 660BB


MISC:
STEEL PUG AND SPECIAL LUBRICANT Lomu + 410SS TRIM PTFE/VITON (FLOW SERVE LUBE

DESCRIPTION:
PLUGCOCK, 6" ANSI 125#FLNG FLT FACE, 733C FS LUBE


MISC:
VALVE IS A216WCB BODY WITH STEEL PUG AND SPECIAL LUBRICANT Lomu + 410SS TRIM PTFE/VITON


MISC:
VALVE IS STEEL PUG AND SPECIAL LUBRICANT Lomu + 410SS TRIM PTFE/VITON


MISC:
BAUXITE GRINDING MILLS 7 X 84 TYPE 1150T20


NOTES:
Tyler $180 06/16 REVESTIMIENTO DE LA CARCAZA (Pump Size 4/3). 369.00MCHT(4/17)


MISC:
VALVE IS CAST IRON PUG AND SPECIAL LUBRICANT Lomu + 410SS TRIM PTFE/VITON


DESCRIPTION:
SEAL, INPRO THRUST END  P/N 657-8751P-61


DESCRIPTION:
COLLAR, SPLIT, THRUST  P/N 663-0465B-00-OP40C


DESCRIPTION:
RING, SPRING RETAINER  P/N 66-7703P-03-00*


DESCRIPTION:
FLINGER, INT. LABYRINTH  P/N 655-2785C-00-04TEP


DESCRIPTION:
SEAL, SHAFT, FLANGE DBL. ROTOR (DRIVE END)


DESCRIPTION:
SEAL, SHAFT, FLANGE DBL. ROTOR (WET END)


DESCRIPTION:
VALVE, PLUG TYPE 300# C/WITH GEAR OPERATOR


MISC:
PTFE SLEEVED, FLUOROSEAL # PIECCE 152F WCB/316 ALCAN PROTECT V413 C/W DTF-468 GEAR

DESCRIPTION:
VALVE, 3" PLUG CIV GEAR OPERATOR W/HANDLE ASTM A216 150#


DESCRIPTION:
COUPLING, DRIVE HALF, FLEX TYPE DWG. G-3976


DESCRIPTION:
STUD, FRAME PLATE LINER 1 NUT M12Z3-80VV

NOTES:
Tyler $N/A 06/16 TORNILLO DE REVESTIMIENTO


MISC:
NEW #48726 INVESTMENT CAST, OLD 39932 IN 317L MATERIAL


DESCRIPTION:
PUMP, 250 HP @ 344 ft H(m), 2518 GPM, 20 FT NPSHr


MISC:
(ORIGINAL. MADE CHANGES TO 318MM Jan'18).


MISC:
Bearing, bowl intermediate is the same as bearing, bowl discharge. NTRN/GFT/PTFE changed to Leaded Bronze

DESCRIPTION:
BEARING, BOWL INTMD & DICHRG ASTM B140 LDDBRNZ

NOTES:
Grosvin confirmed all bowl bearings are the same for this pump.


DESCRIPTION:
SPIDER & BEARING  - NOT USED IN THIS PUMP


DESCRIPTION:
2" POLY VALVE DOUBLE DIAPHRAGM MINING PUMP - AFVMP50/PPPPP/HYT/HY/HY

NOTES:
AFVMP50/PPPPP/HYT/HY/HY - Model/Wetted Parts & Outer Pistons / Air Chambers / Center section / Air Valve / Diaphragms / Valve Balls / Valve Seats


DESCRIPTION:
MOTOR, 500HP 875RPM 117AMP 2300VOLTS (MILL 5)


MISC:
Quoted 511492, new motor chosen.  FRAMES 8211S, TESV. Type KAF

DESCRIPTION:
MOTOR, INDUCTION 500 HP 883 RPM 2300 VOLTS  GE MOTOR (RECONDITIONED)


MISC:
STUD IS M30 X 125MM LONG, BOLT, ADJUSTING 3NUT 2 WASHER D066ME62


MISC:
INCLUDES  1 AGITATOR _2 STABILIZERS 038MP-H01A

NOTES:
Quote from SINOMIN (TOTAL MOULD PRICE $10,000)


MISC:
FLOTATION MIXER (2 stabilizer segment  + 1 agitator). Metal Skeleton(Q235) covered R55

NOTES:
mould 65 days, parts 10 days; price $836.67 is for a complete stabilizer (2 SEGMENTS)


MISC:
FLOTATION MIXER (2 stabilizer segments + 1 agitator) Material Q235 covered with R55r @ 75 Shore A hardness.

NOTES:
mould 65 days, parts 10 days. P.O. Order6


MISC:
PLUG, PIPE ITEM 747 INSTALLED IN SUCTION BOWL BOTTOM


MISC:
EL MCHT-FORRO SUCCION LADIAL BOMBA (translation).  SAME AS A/C 98-231-071-5


DESCRIPTION:
BEARING, BOWL INTMD & DICHRG ASTM B140 LDDBRZ


MISC:
HEAT PROOF, WATER PROOF, CORROSION PROOF


NOTES:
Tyler $305 16/16 PLATO DE CUBIERTA (Pump Size 4/3)


MISC:
BOMBA DE ALIMENTACION AL CICLON WARMAN 8/6


MISC:
BEARING LOCK WASHER #W-11 WASHER, PRECISION


DESCRIPTION:
CASING, W/PKG BOX 430BHN  - P/N 510342/7


DESCRIPTION:
SOCKET, LABYRINTH SET SCREW CUP POINT M12A225H


DESCRIPTION:
PUMP, BARE SHAFT C/W CV MOUNT-BASE-GUARD


DESCRIPTION:
VALVE, BUTTERFLY DUPLEX 20MESH MONEL BSKT


DESCRIPTION:
PUMP SET, 1.3SG/Sludge, 165m3/h @ 63m 1450rpm 75KW

NOTES:
MOTOR #Y280S-4 SIZE 75KW 380V/50 CYCLE 1450RPM


DESCRIPTION:
PUMP SET, 70 m3/h @ 59m Motor 380v/50hz 1450rpm


MISC:
BEARING CONE SPACER, X45447 / Old#3397909120 /NYSTAR 1024844


MISC:
FOR 1-15/16" SHAFT PER BM-102-2 SIMILAR TO DRAWING 9184-J1/R1


DESCRIPTION:
GLAND, 2 PC INC. 2 GLAND CLAMP BOLT+1 NUT, M10H1-80SN


NOTES:
PTFE SLEEVED, FLUOROSEAL #PIECE 152F WCB/316 ALCAN PROJECT V413 C/W DTF-468 GEAR OPERATOR WITH HANDLE ASTM A216, CLASS 150 CAST STEEL PLUG AND BODY. MARKING IN ENGLISH TO SHOW ON & OFF


DESCRIPTION:
NUT, LOCK / TUERCA,PRESION 524194-INTMPE


MISC:
IMPULSOR,BRONCE CONJUNTO / TUR-14DC-COL-STD ANSI/ASTM B148, ALLOY C95300, 10 7/8" TRIM WITH SEAL R


MISC:
BUSHING, THROATBUSH, RUBBER, F6083R26 / U/W-WARMAN PUMP 8X6-MDS7393


MISC:
to replace Outokumpu Tank Cell Agitator per their dwg DOC250615

NOTES:
Wet-end material is 316SS shaft and blade assembly.


MISC:
STUD, FRAME PLATE ADPTR,M6Z3-35VC /SIZE 16mm x 35mm long with nut and flat washer.


MISC:
STUD, FRAME M12Z3-50VC/ GRADE 5 STEEL STUD 10MM X 50MM LONG WITH FLAT WASHER & NUT


MISC:
PORT ESQUIVEL CAUSTIC TANK CAR LOADING PUMP. MOTOR IS 415V 50HZ TEFC

NOTES:
TERMS: 50% ADV AND 30% ATS CHINA, BALANCE NET 30 DAYS. DELIVERY IS 5 WEEKS. NOTE: PRICE INCLUDES 20HP IP56 ENCLOSURE SEVERE DUTY IEEE 841 MOTOR.


DESCRIPTION:
PIPE, DISCHARGE D3SAA5026 / TUBO,DESCARGA


MISC:
CIV GEAR OPERATED PTFE SLEEVED, FLUOROSEAL #PIECE 152 F PROJECT V413 C/W DTF-468 GEAR OPERATOR + HANDLE

DESCRIPTION:
VALVE, STEEL PLUG  150# C/W GEAR OPERATOR


MISC:
RESISTANT TO ABRASSIN, VULCANIZED NATURAL RUBBER 55F

DESCRIPTION:
PUMP, BARE SHAFT C/W TEFC 15HP MTR 254T 1765RPM


DESCRIPTION:
PUMP, BARE SHAFT C/W TEFC 25HP MTR 284T 1775RPM


NOTES:
Gate Valve Specifications
VALVE TYPE: GATE VALVE
NOMINAL SIZE: NPS 2 R (DN 50 R)
PRESSURE RATING: CLASS 800 (PN 130)
END CONNECTION: THREADED
CONSTRUCTION: WEDGED, BOLTED BONNET
BODY AND/OR BONNET/COVER MATERIAL: A105
TRIM DESCRIPTION: 316/316/316
SEATINGSURFACE OF CLOSURE MEMBER
(DISC/GATE): 316
SEATING SURFACE OF BODY SEAT: 316
STEM: 316
CLOSURE MEMBER (DISC/GATE):
SEAT SEAL: METAL
OPERATION MODE: HANDWHEEL
REDUCED BORE, SOLID WEDGE, API 602 DESIGN,
F TO F=140MM.


DESCRIPTION:
SCREEN, BASKET 225 U/W-SIMFLO PUMP SER:86937-2 MODEL:ST14C-7 250HP


MISC:
sleeve bearing; 1-15/16 I.D., 3" O.D., 4-1/2 LONG BEARING HARDNESS IS 65-75 SHORE A

DESCRIPTION:
SLEEVE BEARING 21319-6-705 / RODAMIENTO, HULE


DESCRIPTION:
BOX, PACKING 3957130 U/W-JOHNSTON PUMP 250HP


MISC:
IMPELLER COLLET / SEGURO IMPULSOR 1625-064  ; Material ASTM A36 - India

NOTES:
(15% QTY20). DrwG 600094-H01 drawn is for a Johnston 500HP, price I have is 81 USD for this part. (6/6/19)


MISC:
IMPULSOR, HULE URETANO /IMPELLER, 25396, 6-S-P URETHANE, / supplied #25349 natural rubber PHTSA#5440-P


MISC:
TO FIT ON SHAFT 1-15/16" DIAMETER 600009-H01/R3; old dwg#2066-C2,


MISC:
SCREEN, UPPER,  24007 -520 BLACK RUB / SCREEN, UPPER 2.5" -100 P/N 24007  PHTSA#5345-A


DESCRIPTION:
STUFFING BOX, BEARING 2.43X2.93X5.75.  IE4991109


MISC:
BALINERA,COLUMNA SIZE  1.93X2.93X600 MATERIAL TYPE B143-18


DESCRIPTION:
SCREW, GLAND ADJUSTING (CODE-2229 CAT #757)


DESCRIPTION:
TUBO, DESCHARGE / PIPE, DISCHARGE, #21877


DESCRIPTION:
TRASH PUMP KRS822L PERFORMANCE   30HP 4"


DESCRIPTION:
TRASH PUMP LH311W60 PERFORMANCE  15HP 4"


DESCRIPTION:
TRASH PUMP KTZ45.5-61 PERFORMANCE  7.5HP 4"


DESCRIPTION:
TRASH PUMP KTZ411-61 PERFORMANCE 15HP 4"


MISC:
ASBESTOS FIBER DOWSING WITH MICA   /  C111Q31


MISC:
DENVER PART #503459 & 50184. OUTBOARD BRG. CAP


MISC:
SAME AS DENVER 504828.  FM- FORRO Lado SUCCION #2-174-5


MISC:
FM- FORRO MOTRIZ 3 X 3 SRL/ SAME AS DENVER


MISC:
SAME AS DENVER #504828  / FM-SG IMP NAT RUB CHECK 5X4-14 #98039047501


MISC:
SAME AS DENVER EXCEPT HUB THREADS ARE 2-1/2" - 4 THDS/IN ACME-2G  RH.

NOTES:
KAN WEE PRODUCES ONLY A05 MATERIAL, FOR RUBBER IMPELLER ORDER FROM PIPSA / IMPULSOR P/BOMBA SRL  8 X 6 X 18


MISC:
SAME AS DENVER #504503 / 98-231-071-501 / FM- FORRO SUCCION  3 X 3 SRL


MISC:
SAME AS DENVER#504874 / FORRO LADO ESTOPERO BOMBA SRL

DESCRIPTION:
LINER, GLAND SIDE 8X6 RUBBER 98-231-123-501


MISC:
SAME AS DENVER #504907 EXCEPT MATERIAL TYPE / FM- SU LINER NAT SFO 8X6-18 #98231120501

DESCRIPTION:
PLATE, SUCTION SIDE 8X6 RUBBER 98-231-120-501


MISC:
SAME AS DENVER #51826  (FORRO LADO ESTOPERO BOMBA SRL 8x10x21?)


OTHER AM:
$1022.15 SERVICIOS INDUSTRIALES MINEROS AP


DESCRIPTION:
IMPELLER, DRIVE END NATURAL RUBBER 45926


DESCRIPTION:
LOCK WASHER, BEARING OUTER BOARD 8910-0010


NOTES:
SELLO ACEITE #473239  OR GOULDS (3X3-10) Emili FMRFQ info


OTHER AM:
10.91   BOMBAS Y SUMINISTROS DEL NORTE SA D


MISC:
(42828?) SAME AS A/C#98-231-134-501 & DENVER #51825  EXCEPT MATERIAL / FORRO LADO SUCCION BOMBA


MISC:
F6015ME65 IS WRONG PART NUMBER. WARMAN CALLS THIS ITEM COVER PLATE BOLT WITH COST $110.70 IN 2000

OTHER AM:
630.60 PROVEEDORA DE SUPLEMENTOS Y SERVICI


MISC:
SIZE: 92MM X 85MM X 3.5MM THICK.  FM-O'RING DE FLECHA #E109S50 WARMAN 10x8


NOTES:
Terakhir:$460 ; Tyler $306; AoJin: $146.40 REVESTIMIENTO DEL PLATO DE LACUBIERTA  (Pump Size 6/4)


OTHER AM:
2,127.57 PROVEEDORA DE SUPLEMENTOS Y SERVICI


OTHER AM:
2181.00   PROVEEDORA DE SUPLEMENTOS Y SERVICIO


MISC:
FORRO L ESTOPERO WARM 8X6 SERIE A TIPO E


MISC:
TSSRBY50424B.  SEAL OIL GP1/DURCO3 GRUP1 #BY50424B-TSSR


MISC:
TSSRBY50424C,  SEAL OIL/DURCO3 GRUP2 #BY50424C-TSSR


MISC:
FOR PARTECH, SUPPLY IN 316L MATERIAL (98-236-104-001)/ FM-MANGA (GOULDS 5X4-14 SRL-C) #1-009-0

NOTES:
3.125" X 3.75" X 6.50" LONG, NEW A/C #SL-1601-316. HARD COATED #SL-1601-561, PRICE IS $578.00 FROM ADVANCED ENGINE.


MISC:
P/N 21814 / FM-PARRILLA INFER D3SRA5004 #21814


MISC:
FM-SELLO DE AGUA P/BOMBA 5 X 4  - 98-236-256-001


NOTES:
FOR FOB HOUSTON 40 FREIGHT, 30 CLEAN FEE, 40. PROFIT  / BRIDA SELLO MECANICO BBA GOULDS 1X2-10


OTHER AM:
$1168.20 SERVICIOS INDUSTRIALES MINEROS AP


NOTES:
NOTE: IMPELLER SAME AS DENVER #504978 EXCEPT HUB THREAD IS: 2-3/4" - 4 ACME -2G R.H.  / IMPULSOR P/BOMBA SRL 10 X 8"-


DESCRIPTION:
CASING, SUCTION SIDE STANDARD 5X4 503179


MISC:
FM- FORRO LADO ESTOPERO BOMBA SRL-C DE 8 X 6 / SAME AS A/C #98-231-123-501


MISC:
SAME AS A/C #98-231-120-501? EXCEPT MATERIAL TYPE

NOTES:
FORRO LADO ESTOPERO BOMBA SRL-C DE 8 X 6


MISC:
FM-DISTRIBUIDOR DE AGUA BBA GOULDS 8X6-18


MISC:
FM-IMPELLER, ASSY W/TEFLON O-RING 4x6-17


MISC:
LOCKNUT I.E BEARING #120-1 NASH #BB-0054


MISC:
SAME AS A/C #98-231-120-501 EXCEPT MATERIAL TYPE / FM-FORRO LADO SUCCION BOMBA SRL-C DE 8 X 6


DESCRIPTION:
IMPELLER, METAL CHROME TALL 504886 NYRSTAR13


MISC:
MARK III GRP 2  1500 RPM  CAP100GPM       *** SAME # FITS MARK II MODEL 2X2R-10/100  & MARK II 2K2X1-10/73ARW ***


NOTES:
TERMS FOR PRICES FOB- ASIA PORT (not including tarrifs). Add Shipment, brokerage, tariffs costs.


MISC:
FM- DIST. DE AGUA / BOMBA 5 X 4 ( DGO ) / WATER SEAL MMP-01746 BBA


MISC:
FM- GLANDULA,FORRADA LADIAL / SAME AS A/C #98231070501


MISC:
SAME AS A/C #98-231-120-501 EXCEPT MATERIAL TYPE.  FM-FORRO LADO SUCCION P/BOM?


OTHER AM:
395.52 * 98-236-256-501?BOMBAS Y SUMINSTROS DEL NO


DESCRIPTION:
CASING, GLAND HALF STANDARD 98-431-797-501


NOTES:
MANGA BOMBA 8"X6"TIPO SRL-C ACERO D2 61RC 1045


MISC:
fm- COVER ASSY INB #98-331-936-801 BEARING

DESCRIPTION:
COVER, BEARING INBOARD 8X6 98-331-936-801


MISC:
FM-BUSHING THROAT #98233732001 BBA GOULDS


MISC:
FM-PLATO SUCCION P/BOMBA 10X8.  98-231-135-501


MISC:
R196MKM13 / FM-KIT DE REPARACION 13" X LT 1 #R196-MK13Z


MISC:
CASING GASKETS - FM-COVER GASKET/DURCO3 GRUPO1 #Y22774EA-TM


MISC:
FM-FORRO LADO ESTOPERO / BOMBA 5 X 4  /  504826?


NOTES:
Jan23/11 / WINDOW, SIGHT #A01154A05 BBA GOULDS. $30 SUMMIT (2005)


NOTES:
FLECHA #122 GOULDS 3X4-10 FMRFQ#03052017  Emili


MISC:
SAME AS DENVER P/N#47815, 504978 & SALA #47815 EXCEPT THREADS ON HUB ARE 2-3/4" -4 ACME -2G R.H.


OTHER AM:
$1314 - Servicios Industriales Mineros AP


MISC:
FM-AIR VALVE SCREEN #08250007 WILDEN T15


MISC:
FM-ASIENTO DE VALVULA BOMBA WILDEN T-15  / INDIA- "Ball Seat"

DESCRIPTION:
VALVE, SEAT COVER WILDEN T-15 15-1120-51


MISC:
FM-ABRAZADERA CHICA BOMBA WILDEN T-15 #15-7100-08


MISC:
FM-DIAFRAGMA AIR SIDE #15-1010 WILDEN T-15


MISC:
FM-GASKET CENTER BLOCK #04-3529-52   india #04-3529-51  "AIR CHAMBER GASKET"


MISC:
FM- PARTE DE ABAJO#15-5080-01. TRANSLATED- BOTTOM PART#15-5080-01


MISC:
FM-TORNILLO#15-6130-08 BBA   /  INDIA-AIR COVER BOLTS 15-6130-03


MISC:
SEAL OIL 1K /DURCO3 GRUP1 #BY50424G-TSSR


MISC:
**** #45138 is the core for #45136 Dry gland housing liner, and is not sold as a part.

OTHER AM:
$1308- Servicios Industriales Mineros AP


OTHER AM:
$206.25 INGENIERIA BEJAR PARA LA MINIERIA


MISC:
SELLO MECANICO #C2CPX1375ECXVB BBA DURCO


OTHER AM:
$439.75 MATERIALES ELECTRICOS DE DURANGO


MISC:
Back cover for housing/ Engine side cover

DESCRIPTION:
CUERPO, D/SOPORTE #RD11741A011003 P/N - BODY/FRAME SUPPORT


DESCRIPTION:
LINER, CASING DRIVE SIDE RM250-013-26001


MISC:
FM-FORRO L ESTOPERO 5X4-14 SRL-C #2-174-0


MISC:
FORRO Lado SUCCION  5X4-14 SRL-C #2-174-5


MISC:
TAPA LADO BOMBA PARA BOMBA 3x3 / TAPA LADO ESTOPERO PARA BOMBA 3x3


DESCRIPTION:
BUSHING, CROSSHEAD PIN AXG229 BBA DUPLEX


OTHER AM:
113.40 PROVEEDORA DE SUPLEMENTOS Y SERVICIOS


MISC:
FM-MANIFOUL DESCARGA #08-5020-01 WILDEN M-8


MISC:
FM-SG-IMPELLER NAT #98211426501 2x2x10 SRL


DESCRIPTION:
COVER, STUFFING BOX TAPERED WITH FLOW MODIFIERS


MISC:
FM-KIT DE REPARACION XLT12 117 #R196XLRKOZ

OTHER AM:
532.32 BOMBAS Y SUMINISTROS DEL NORTE SA D


OTHER AM:
2,187.44  BOMBAS Y SUMINISTROS DEL NORTE


MISC:
FM-MANGA PARA BOMBA 5" X 4"  TIPO SRL / 98-331-958-808?


MISC:
FM - MANGA BOMBA 6"X6"TIPO SRL ACERO D2 61RC - ?98-331-958-8208?


MISC:
SAME AS DENVER #51826  & SALA #51826 EXCEPT MATERIAL IS R08


MISC:
SAME AS DENVER #51825 & SALA 51825  EXCEPT MATERIAL


NOTES:
INCREASE PRICE TO NYRSTAR FROM $532 TO $692.00


DESCRIPTION:
PLATE, COVER W/2BOLTS,   F6015ME66 (F6015ME65?)


MISC:
SEE E039ME63 (New part #), PUMP 6 x4 10 WBH


MISC:
ACCESSORY KIT#K086EJ0036800E6         RFQ 240000 IMP


MISC:
CAMISA, EJE AlTA CROMADURA / MDS42091-M / PART NO. F005M

DESCRIPTION:
SLEEVE, SHAFT F075C21 / CAMISA, EJE ALTA CROMADURA


MISC:
SET CONSISTS OF: 5 SHIMS 0.1mm thk, 5 shims 0.2mm thk, 5 shims 0.4mm thk. P/N F025P10


MISC:
FOR PARTECH, SUPPLY IN 316L MATERIAL (SAME AS 98-236-104-001 EXCEPT MATERIAL)


MISC:
HUB THREADS ARE 1-1/4" - 7THREADS/INCH DOUBLE LEAD


MISC:
SEE DWG #1686-C1 MODIFIED FOR USE WITH AN AGITATOR


NOTES:
USED BY INCO SUDBURY DWG #41-100-G-95896


MISC:
IMPELLER FOR THIS SHAFT IS 19.375" DIA. MATERIAL 1045HRS


MISC:
THREADS ON HUB ARE 2-3/4" -4 ACME -2G R.H.


DESCRIPTION:
PUMP, BARE SHAFT C/W BUTL LINERS-IMPELLER


MISC:
GRADE 5 STEEL STUD 10MM X 50MM LONG WITH FLAT WASHER & NUT


MISC:
316SS, LUGGED, HASTELOY DISC, VITON SEAT, ANSI CLASS VALVES


DESCRIPTION:
BUTTERFLY LUG TYPE HP 10" 150# ANSI RTFE


DESCRIPTION:
BUTTERFLY LUG TYPE HP 12" 150# ANSI RTFE


DESCRIPTION:
BUTTERFLY LUG TYPE HP 14" 150# ANSI RTFE


DESCRIPTION:
BUTTERFLY LUG TYPE HP 16" 150# ANSI RTFE


DESCRIPTION:
BUTTERFLY LUG TYPE HP 18" 150# ANSI RTFE


DESCRIPTION:
BUTTERFLY LUG TYPE HP 20" 150# ANSI RTFE


DESCRIPTION:
BUTTERFLY LUG TYPE HP 24" 150# ANSI RTFE


DESCRIPTION:
BUTTERFLY LUG TYPE HP 26" 150# ANSI RTFE


DESCRIPTION:
BUTTERFLY LUG TYPE HP 28" 150# ANSI RTFE


DESCRIPTION:
BUTTERFLY LUG TYPE HP 30" 150# ANSI RTFE


DESCRIPTION:
BUTTERFLY LUG TYPE HP 10" 300# ANSI RTFE


DESCRIPTION:
BUTTERFLY LUG TYPE HP 12" 300# ANSI RTFE


DESCRIPTION:
BUTTERFLY LUG TYPE HP 14" 300# ANSI RTFE


DESCRIPTION:
BUTTERFLY LUG TYPE HP 16" 300# ANSI RTFE


DESCRIPTION:
BUTTERFLY LUG TYPE HP 18" 300# ANSI RTFE


DESCRIPTION:
BUTTERFLY LUG TYPE HP 20" 300# ANSI RTFE


DESCRIPTION:
BUTTERFLY LUG TYPE HP 24" 300# ANSI RTFE


DESCRIPTION:
BUTTERFLY LUG TYPE HP 26" 300# ANSI RTFE


DESCRIPTION:
BUTTERFLY LUG TYPE HP 28" 300# ANSI RTFE


DESCRIPTION:
BUTTERFLY LUG TYPE HP 30" 300# ANSI RTFE


MISC:
IS 2062 GR. B (M.S. FABRICATED) BODY, ASTM A 351 Gr. CF8 DISC, METAL TO METAL SEAT, AISI 410 SHAFT

NOTES:
CLASS II (5% LEAKAGE OF MAIN FLOW) DOUBLE FLANGED


DESCRIPTION:
BFV,LG CF8 BODY,CF8 DISC,17-4 SHAFT,6",150#


DESCRIPTION:
BFV,LG CF8 BODY,CF8 DISC,17-4 SHAFT,10",150#


DESCRIPTION:
BFV,LG CF8 BODY,CF8 DISC,17-4 SHAFT,12",150#


DESCRIPTION:
BFV,LG CF8 BODY,CF8 DISC,17-4 SHAFT,20",150#


DESCRIPTION:
BFV,LG CF8 BODY,CF8 DISC,17-4 SHAFT,24",150#


DESCRIPTION:
BFV,LG CF8 BODY,CF8 DISC,17-4 SHAFT,30",150#


DESCRIPTION:
BUTTERFLY LUG 20" 150# ANSI VITON GEAR OP.


NOTES:
SUMMIT IMPELLER 6V $1,500, SELL/OEM($1038/$1350)


NOTES:
SUMMIT IMPELLER 5V ALLOY 20 MTO P/N  100-593-1204  $1,000.00


NOTES:
MTO - CASING 150# FF (INTMPE 2016 $2000)


MISC:
SIZE: 1.625 X 2.375 X 3/8" WIDE (OVERALL)


MISC:
C/W HIGH CAPAICITY BEARINGS & ACCESSORIES

DESCRIPTION:
43CMR PUMP, BARE SHAFT IA05IMP/IR26LINER


DESCRIPTION:
IMPELLER, BALANCED #6X19A3AX-2B-813 18-1/4" DIA


DESCRIPTION:
GREASE ZERK, O.B.BEARING COVER; ITEM#13A


NOTES:
SUMMIT CASING 150# FF XLO - D.IRON $6,100, 316SS $8,870


NOTES:
SUMMIT STUFFFING BOX STD BORE COVER DI $220


MISC:
Shaft Dia STX=1.375"  (CROSSOVER WITH SUMMIT MODEL #2196)


MISC:
80967J- FLEXICRAFT QUOTE- END FITTINGS C/S MATERIAL, S/L DESIGNATION=L, SIDE 1&2 -150# PL FLG,


MISC:
80967J- FLEXICRAFT QUOTE 62502 - CAST CARBON STEEL, SCREEN 316SS, 0.125 SCRN PRFRTN, 18.5" DISTANCE,


DESCRIPTION:
PUMP, TRIPLE TWIN GEAR 1740USGPM 270HP/440V/50CYCLE


MISC:
MOTOR 280KW FOR PUMPING 450 m3/h @ 65m TDH

DESCRIPTION:
PUMP, BARE SHAFT SINGLE CASE SAND DREDGE


MISC:
SIZE: 92MM X 85MM X 3.5MM THICK; OEM TO DISTRIBUTOR $11.63 IN 2007; SOLD $6 03/13


MISC:
WEIR TO DISTRIBUTER IN 2000 $811.80. SOLD $679 TO DDG IN 12/2015


MISC:
MODIFIED FOR CEFILAC SEAL    SLURRY PUMP


MISC:
FRAME C, 2030RPM (SLURRY), quote $632 02/14


MISC:
OEM TO DISTRIBUTOR $26.08 IN 2007; SOLD $40 05/11


MISC:
OEM TO DISTRIBUTOR $135.84 IN 2007; SOLD $28 06/12


MISC:
OEM TO DISTRIBUTOR $265.17 IN 2007; SOLD $176 05/10


MISC:
SEE E039ME63 (New part #) OEM TO DISTRIBUTOR $66.29 2007 SOLD $70.93 5/10


MISC:
OEM TO DISTRIBUTOR $25 IN 2007. SOLD $16.00 03/13


MISC:
OEM TO DISTRIBUTOR $89.11 IN 2007. SOLD $43, 05/12


MISC:
OEM TO DISTRIBUTOR $94.55 IN 2007; SOLD $144 05/10


MISC:
ACCESSORY KIT#K086EJ0036800E6; OEM TO DISTRIBUTOR $417.31 2007; SOLD $637 03/13


MISC:
ACCESSORY KIT#K108FB0246800E6; OEM TO DISTRIBUTOR $355.37 IN 2007; SOLD $324 10/14


MISC:
WEIR$301. JOHN QUOTED $186, 08/16, TO END USER $232. New design: C2145WRT1A05


MISC:
OEM TO DISTRIBUTOR $17.17 IN 2007; SOLD $18.37 10/14


MISC:
SIZE: 76mm O.D. X 5.3mm CROSS SECTION; OEM TO DISTRIBUTOR $17.17; SOLD $25.99 05/11


MISC:
OEM TO DISTRIBUTOR $247 IN 2007. SOLD $212, 01/14


MISC:
OEM TO DISTRIBUTOR $76.07 2007 SOLD $65.20 1/14


MISC:
OEM TO DISTRIBUTOR $332.55. SOLD $68.00, 06/12


MISC:
(OEM PRICE HEMMEN)OEM TO DISTRIBUTOR $1311.71 IN 2007. SOLD $840. 05/14


MISC:
OEM TO DISTRIBUTOR $26.08 IN 2007; SOLD $26.08 08/09


MISC:
ACCESSORY KIT#K043CE0016800E6 / OEM TO DISTRIBUTOR $228.22 IN 2007 SOLD $145.60 1/14


DESCRIPTION:
GASKET (LBEARING. FELT)4X4.4X217L FROM FELT


MISC:
OEM TO DISTRIBUTOR $157.58 IN 2007; SOLD $240 05/11


MISC:
SIZE 16mm x 35mm long with nut and flat washer.


MISC:
Customer accept B1041A05 to replace B1041HS1A05


MISC:
MODIFIED STUFFING BOX, IMPELLER, SHAFT, BEARING COVERS. SEE INTMPE DRAWINGS FOR THESE MODIFICATIONS

DESCRIPTION:
PUMP, BARE SHAFT C/W MS/INPRO/SPIRAL TRAC


MISC:
This pump model is a 1.5/1 CHH Warman. Part#CH1127BFA05


MISC:
This pump model is a 1.5/1 CHH Warman. Part#CH1110A05


MISC:
This pump model is a 1.5/1 CHH Warman. Part#CH1041-33MA05


MISC:
PUMP IS COMPLETE WITH INSTALLED AGITATOR FOR EXXON/COLD LAKE PROJECTS. PUMPS 6P5031-33


DESCRIPTION:
ANVIL, VERTICAL IMPACT CRUSHER price out  ASTM A128 MANGANESE


NOTES:
FOR PARTS EXPLOODED VIEW OF COLUMN/ADAPTER/DISCHARGE HEAD SEE 600029-N01-R2


# PartData-NotCombined

DESCRIPTION:
CASING, W/STUFFING BOX DWG#411335-D (CANADA PUMPS STANDARD P/N 2, 2A & 6 )

NOTES:
NOTE: NEW PRICING RELATES TO 28% CHROME IRON, NOT NIHARD AS OLD PRICE


DESCRIPTION:
GLAND, SPLIT - P/N 310501  (CANADA PUMPS STANDARD P/N 12A)


MISC:
MODIFIED FOR CEFILAC SEAL    SLURRY PUMP. Sold to crsjl $580. 02/15

DESCRIPTION:
LINER, DRIVE SIDE 6" CFLC BORE - P/N 215372 (CANADA PUMPS STANDARD P/N 89)

NOTES:
ADVISE BORE WHEN ORDERING, 6" OR 5-3/8" (USE 9011-J1 PATTERN, BUT CHANGE BORE)


MISC:
ASTM A743 Ni is around 4%, Cr is 13.5%, Mo is 1%

DESCRIPTION:
CASING, MODIFY FOR CARTRIDGE SEAL 400BHN - P/N 412214-5 (CANADA PUMPS STANDARD P/N 2 AND 2A)


MISC:
HEAT TREAT TO 290-320Bhn     MODIFIED FOR CEFILAC SEAL

DESCRIPTION:
CASING, PACKED BOX  - P/N 412214-5 (CANADA PUMPS STANDARD P/N 2 & 2A)


MISC:
SEE DWG #1437-J1 FOR WEAR LINER, SUC. SIDE & 1132-J1-2 FOR CASING COVER/ AS STATED ON CLASS A SHEETS P/N 2

DESCRIPTION:
COVER, CASING DRIVE SIDE - P/N 053-D-0002 (CANADA PUMPS STANDARD P/N 2 & 2A)


DESCRIPTION:
BEARING FRAME (CANADA PUMPS STANDARD P/N 22)


DESCRIPTION:
COVER, SUCTION SIDE (CANADA PUMP STANDARD P/N 5)

NOTES:
***NOTE CHECK FOR LATEST REVISION BEFORE MANUFACTURING.*** (MOLD 861.00)


MISC:
SEE DWG #1437-J1 FOR WEAR LINER, SUC. SIDE & 1132-J1-2 FOR SUC. END COVER & 1267-J1-3 FOR MODIFIED VERSION OF 1132-J1, 1131-J1 CASING COVER

DESCRIPTION:
CASING EV18064 - 500Bhn (CANADA PUMP STANDARD P/N 2)

NOTES:
THERE IS 3 SHEETS FOR THIS 1 DRAWING #1221-J1. SHEET 1 = DIMENSIONS, SHEET 2 = HYDRAULIC PROFILE, SHEET 3 = PLUG DETAILS.


DESCRIPTION:
IMPELLER, 12-1/2"DIA 3V 400BHN (CANADA PUMPS STANDARD P/N 3)


DESCRIPTION:
IMPELLER, 13" DIA 3V 400BHN (CANADA PUMPS STANDARD P/N 3)


DESCRIPTION:
IMPELLER, 15" DIA 3V 400BHN (CANADA PUMPS STANDARD P/N 3)


DESCRIPTION:
IMPELLER, 16" DIA 400BHN 8V W/RINGS - P/N 312727 (CANADA PUMPS STANDARD P/N 4)


NOTES:
****NOTE: CHECK FOR LATEST REVISION BEFORE MANUFACTURING.****


DESCRIPTION:
IMPELLER, 14" DIA 3V 400BHN (CANADA PUMPS STANDARD P/N 3)


DESCRIPTION:
LINER, DRIVE SIDE 500Bhn 3-1/2" STD BORE  (CANADA PUMPS STANDARD P/N 89)

NOTES:
SAME AS 4122-J1/R3 EXCEPT BORE OF PLATE IS 3-1/2" DIAMETER


DESCRIPTION:
CASING, W/PKG BOX 280BHN  - P/N 510342/7 (CANADA PUMPS STANDARD P/N 2 & 2A)

NOTES:
NOTE: SIZE 10X12S CASING IS $15680 SELLING PRICE AND OEM $26400.00


DESCRIPTION:
CASING, W/STUFFING BOX 220BHN - P/N 510180 (CANADA PUMPS STANDARD P/N 2, 2A & 6)


MISC:
CW PUMP (CURVE 3 DS-G-141 PUMP SPEED 960RPM)

DESCRIPTION:
IMPELLER, 11-3/4" DIA W/RING  - P/N G-6401R (CANADA PUMPS STANDARD P/N 3 & 3A)


DESCRIPTION:
411744  IMPELLER, 16-1/2" DIA 3V 400BHN - P/N (CANADA PUMPS STANDARD P/N 3)


DESCRIPTION:
GLAND, SPLIT - P/N G-1878 (CANADA PUMPS STANDARD 12A)


DESCRIPTION:
CASING - P/N 410394-5 (CANADA PUMPS STANDARD P/N 2)


DESCRIPTION:
GLAND, SPLIT - P/N G-1253 (CANADA PUMPS STANDARD P/N 12A)


DESCRIPTION:
SLEEVE, SHAFT PLASMA COATED - P/N 319344 (CANADA PUMPS STANDARD P/N 8)


DESCRIPTION:
GLAND, SPLIT, C/W 4 BOLT - P/N 314781 (CANADA PUMPS STANDARD P/N 12A & 13A)


DESCRIPTION:
IMPELLER, 22" DIA 3V 400BHN W/RNG - P/N 314992 (CANADA PUMPS STANDARD P/N 3 & 3A)


DESCRIPTION:
RING, CASING - P/N 413138 (CANADA PUMPS STANDARD P/N 9)


DESCRIPTION:
SLEEVE, SHAFT CHROME OXIDE PLASMA COATED - P/N 310908 (CANADA PUMPS STANDARD P/N 8)


MISC:
USE 9038-J1 FOR SLEEVE. BRGS ARE SKF #3211 & 7310BG

DESCRIPTION:
SHAFT, FLXSL 3X4DS (CANADA PUMPS STANDARD P/N 7)


DESCRIPTION:
IMPELLER, 20-1/2" DIA 430BHN 8V W/RINGS - P/N 312727(CANADA PUMPS STANDARD P/N 3)


DESCRIPTION:
SLEEVE, SHAFT SHORT - P/N214570 (CANADA PUMPS STANDARD P/N 8)


DESCRIPTION:
SHAFT, FLXSL 12X14-27 S (CANADA PUMPS STANDARD P/N 7 & 7C)


DESCRIPTION:
SLEEVE, STD SHAFT - P/N 319340 (CANADA PUMPS STANDARD P/N 8)


MISC:
SHAFT DWG #9027-J1 WEAR RING DWG #9012-J1 (SEE FOOT NOTES ON WINDALCO DWG# 261604)

DESCRIPTION:
IMPELLER, 23-1/2" DIA., 400BHN 5V C/W W/RING - P/N 314995 (CANADA PUMPS STANDARD P/N 3 & 4)

NOTES:
26" DIA. MAX. IMPELLER TO BE STATIC BALANCED


MISC:
SHAFT DWG #9027-J1 WEAR RING DWG #9012-J1; PATTERN IN INDIA & CHINA

DESCRIPTION:
IMPELLER, 18" DIA., 400BHN 5V W/RING - P/N 314995 (CANADA PUMPS STANDARD P/N 3 & 4)


DESCRIPTION:
SHAFT, FLXSL + SLEEVE - JAD-F-3296 (CANADA PUMPS STANDARD P/N 8)


DESCRIPTION:
SLEEVE, SHAFT PLSMA CTD  - 63RC P/N 311344


DESCRIPTION:
CASING & COVER - P/N 411552-3 (CANADA PUMPS STANDARD 2 & 2A)


DESCRIPTION:
SHAFT, 3X4DS STD ALL SEALS 1.750 DIA. (CANADA PUMPS STANDARD P/N 7 & 14A)


MISC:
CW ACID       (CURVE 3 DS-G-141 PUMP SPEED 960RPM)

DESCRIPTION:
IMPELLER, 11-1/2" DIA - P/N G-1973R (CANADA PUMPS STANDARD P/N 3 & 3A)


DESCRIPTION:
SLEEVE, SHAFT INNER/PLSMA CTD,  - P/N 215414


MISC:
LATEST DESIGN SK-EW-101-JK 1983, SAME AS 9052-J1 OLD DESIGN, ONLY 1 METAL USED

DESCRIPTION:
RING, CASING, BEVEL - P/N 319109  (CANADA PUMPS STANDARD P/N 9)

NOTES:
OLD DESIGN SHOWN ON CANADA PUMP DWGS 319109-A & 9037-J1


MISC:
USES BEARINGS SKF #2316 (170mm) RADIAL & SKF #7415BG (190mm) THRUST. NOTE: SAME STAND USED ON 10X12DS

DESCRIPTION:
PEDESTAL STAND & CAP - P/N G-1382R (CANADA PUMPS STANDARD P/N 22 & 23)


DESCRIPTION:
IMPELLER, 14" DIA 400BHN 3V  C/W W/ BEVEL RING - P/N 319181A (CANADA PUMPS STANDARD P/N 3, 3A & 4)

NOTES:
IMPELLER WEAR RING DWG #9007-J1 STOCK #610447. RING INCLUDED IN IMPELLER PRICE


DESCRIPTION:
IMPELLER, 13" DIA 400BHN 3V C/W W/RING - P/N 319181A (CANADA PUMPS STANDARD P/N 3, 3A, 3B & 4)

NOTES:
IMPELLER WEAR RING DWG #9007-J1 STOCK #610447 RING INCLUDED IN IMPELLER PRICE


DESCRIPTION:
RING, CASING - P/N 213208 (CANADA PUMPS STANDARD P/N 9)


DESCRIPTION:
HOUSNG, BEARING C/W GREASE ZERK  - P/N 311303

NOTES:
(INT.37010-12898 QTY.4) 9097-J1/R1PA IS FOR CAP ONLY, NOT BEARING OUTER HOUSING.


DESCRIPTION:
RING, IMPELLER WEAR - P/N 213209 440 Bhn (CANADA PUMPS STANDARD P/N 4)


DESCRIPTION:
SHAFT, 4X6NH STD ALL SEALS 3.000 DIA.(CANADA PUMPS STANDARD P/N 7, 14, & 14B)


DESCRIPTION:
HOUSING, BEARING  (CANADA PUMPS STANDARD P/N 38D)

NOTES:
(QUOTE: 511037)  DRAWING CORRECTION NEEDED FOR MACHINING!!!!!


DESCRIPTION:
NUT, BRNG HSNG ADJST- P/N 212012 (CANADA PUMPS STANDARD P/N 29A)


DESCRIPTION:
CASING & COVER, CW - P/N 410338 (CANADA PUMPS STANDARD P/N 2 & 2A)


DESCRIPTION:
WEAR RING, IMPELLER , GRAY - P/N 71171-1001


MISC:
DAVID BROWN COUPLING SIZE 03-05, ASSY. P/N 41111-2-025 -MAT: STEEL/RUBBER


NOTES:
MAKE DRAWING. HAVE DRAWING FOR 5.750" VALVE #1112-J1/R1


DESCRIPTION:
VALVE, C/W POLY INSERT  - P/N 83-019-505


MISC:
3/8" RATED 0 to 1000 PSIG FEMALE/FEMALE PIPE (ROUND STOCK CONFIGURATATION) P/N 2300 SERIES,  P/N 78-819-140


MISC:
UTEX #1056-52-0129-01 MATERIAL #1056 IS NITRIL FILLED WITH TEFLON AND COTTON FIBRE. 50 SHORE "D"


MISC:
SEE 667414 FOR SAME RING IN TEFLON MATERIAL

NOTES:
**DELIVERY IS 35 DAYS  MOLD PRICE 85.00  (INT.37016-12992 QTY.100)


MISC:
Material is Manganese Bronze Alloy No. C86300 SAE 430B and ASTM 8C. Bhn 225

NOTES:
***DRAWING $75.00  MOLD: $223.00 BRONZE (CASTING PAT. 246.00)


DESCRIPTION:
GASKET, VALVE COVER 90 DURO  - P/N 16-506-007


DESCRIPTION:
BEARING, CROSSHEAD SHOE  - P/N 16-483-629


MISC:
PLUNGER MADE FROM SOLID STEEL AND HOLLOWED OUT.


MISC:
HOLD!!! DO NOT MANUFACTURE FROM DRAWING UNTIL REVIEW OF NECK AND STRENGTHENING OF ENDS. **** DO NOT USE 1/19 unless specified by customer

NOTES:
R12 IS A ONE PIECE HOLLOWED OUT PLUNGER WITH PLUG ON PRESSURE END.


DESCRIPTION:
PLATE, 18X9X1-1/2" THICK DRILLED MANGANESE


MISC:
UTEX MATERIAL #CPD-50019 HARDNESS 60 DURO

NOTES:
TOLERANCES IN MFG. IS; ALL DIMENSIONS  + - .030. PARTICAL SIZES UP TO 8MM


MISC:
4140 STEEL HT TO 400BHN VALVE RING SEATING AREA

DESCRIPTION:
SEAT, VALVE P/N 831.150.917 (ROUND, WITH O-RINGS)


NOTES:
NOTE: CUTOMER IS USING SQUARE SHAFT NOW, DRAWING #1157-J1


DESCRIPTION:
RING, CASING - P/N G-1882 (CANADA PUMPS STANDARD P/N 9)


DESCRIPTION:
BEARING HALF, CON ROD BIG END  - P/N 1302-2937-80


MISC:
NOTE: WEIGHT OF BALLS IS 2028LBS/45 GALLON DRUM

NOTES:
This is a kind of low Cr cast balls with hardness more than HRC47. In wet grinding process, for dia100mm balls, the wear performance of low Cr cast balls will be better than that of forged balls.


MISC:
USES BEARINGS SKF #22220 C2 (180mm) RADIAL & SKF #7415BG (190mm) THRUST.

DESCRIPTION:
STAND & CAP, BEARING - P/N 410132 (CANADA PUMPS STANDARD P/N 22 & 23)


DESCRIPTION:
CASING & COVER - P/N 410398 (CANADA PUMPS STANDARD P/N 2 & 2A)


DESCRIPTION:
UPPER IDLE ROLLER  (M 154 482) DWG #4024-J1

NOTES:
***NOTE: CHECK FOR LATEST REVISION BEFORE MANUFACTURING.***


DESCRIPTION:
BEARING INSERT, PILLOW BLOCK P/N  034-94-23-1 DWG 4016-J1


NOTES:
SEAT- P/N 1002 2236,GUARD- P/N 1002 2239;VALVE & BUFFER DISCS-P/N __________(SEE DWG)


DESCRIPTION:
DELVERY VALVE COMPLETE, P/N 1002-2237-80


DESCRIPTION:
SUCTION VALVE COMPLETE, - P/N 1002-2236-80


DESCRIPTION:
VALVE SEAT, DELIVERY L.P. - P/N 1002-2237-80


DESCRIPTION:
PIN, W/WASHERS & COTTER PIN,  #1  - P/N 64714-3


DESCRIPTION:
BEARING PILLOW BLOCK CONVEYOR, SMALL DWG#2111-J1


NOTES:
****NOTE: SEE DWG.# 4024-J1 IT IS THE SAME. ****


MISC:
NUT-SAE 1020, SPINDLE-AISI 4140, ROD ASTM B21


MISC:
Drawing shows 10" long x 6-1/2" wide x 5-1/8" deep bucket with bottom radius of 2-1/2"


DESCRIPTION:
COVER, STUFFING BOX - P/N D00781E000-1228


MISC:
B2 BEARING FRAME, Drawing was modified 04/18 by Hopeton


DESCRIPTION:
CASING, W/O BACKWALL -P/N  E00125E000-1228


MISC:
SEE 9026-J1/R2 FOR THE SHAFT STK #600859

NOTES:
SAME DRAWING AS STOCK NUMBERS 600875, 600835 EXCEPT DIAMETER


MISC:
SEAL #180WB-14E P/N 131876 ROTATION CLOCKWISE. IMPELLER TRIM TO 9" DIAMETER

NOTES:
INTMPE MODEL 125S80-370 C/WITH M.S., COUPLING & BASE PLATE S-6 MATERIAL US$10,381.00 CHINA COST


DESCRIPTION:
IMPELLER, 15" DIA 400BHN 3V C/W W/RING - P/N 319181A (CANADA PUMPS STANDARD P/N 3, 3A & 4)


DESCRIPTION:
IMPELLER, 18-1/2" DIA 3V 400BHN W/RING - P/N 314992 (CANADA PUMPS STANDARD 3, 3A & 4)


DESCRIPTION:
SEAL CAGE, SPLIT - P/N 314084 (CANADA PUMPS STANDARD P/N 14A)


DESCRIPTION:
COVER, BEARING OUTBOARD - P/N 311339 (CANADA PUMPS STANDARD P/N 25)


DESCRIPTION:
IMPELLER, 9" DIA 400BHN 4V CCW - P/N 311334


MISC:
COMPLETE WITH PLUG PART  NUMBER CHANGES TO 16-342-024

NOTES:
REQUIRE SAMPLE TO PRODUCE NEW AND OR REBUILD OLD


MISC:
MAKE NUT DRAWING FROM SHAFT & IMPELLER DWG

DESCRIPTION:
NUT, IMPELLER - P/N 212010 *CANADA PUMPS STANDARD P/N 15)


DESCRIPTION:
COVER, HAND HOLE SUCTION - P/N G-2919 (CANADA PUMPS STANDARD P/N 42A)


MISC:
INCLUDES  SHAFT, BRG. HSNG., BRG. FRAME, DR. HALF CPL, CASING COVER


DESCRIPTION:
IMPELLER, 15-3/4" DIA 3V 400BHN - P/N 411744 (CANADA PUMPS STANDARD P/N 3)


DESCRIPTION:
IMPELLER, 16-3/4" DIA 3V 400BHN - P/N 411744 (CANADA PUMPS STANDARD P/N 3)


DESCRIPTION:
COVER, BEARING OUTBOARD - P/N 310304 (CANADA PUMPS STANDARD P/N 25)


DESCRIPTION:
HOUSING, BRACKET & CAP, BEARING - P/N G4316 (CANADA PUMPS STANDARD P/N 23 & 33)

NOTES:
CRS112274-INT.510959) BUFFALO PUMP SOLD FOR $1198.00. R4 Adds spiggot to fit into casing locating groove 1135-J1R4


DESCRIPTION:
NUT, IMPELLER LH THREAD -  P/N 311034 (CANADA PUMPS STANDARD P/N 15)


DESCRIPTION:
NUT, IMPELLER RH THREAD - P/N 311034 (CANADA PUMPS STANDARD P/N 15)


DESCRIPTION:
RING, IMPELLER WEAR 410BHN - P/N 210964 (CANADA PUMPS STANDARD P/N 3 & 3A)

NOTES:
SAME AS STOCK #610445, 610446. RING INCLUDED IN IMPELLER PRICE


DESCRIPTION:
COVER, HAND HOLE (CANADA PUMPS STANDARD P/N 42)


MISC:
SAME AS 610132 RING ON IMPELLER DWG #4014-J1/R4

DESCRIPTION:
RING, IMPELLER WEAR - P/N 213718 (CANADA PUMPS STANDARD P/N 3)


MISC:
SAME AS 610945 RING ON IMPELLER DWG #4014-J1/R4

DESCRIPTION:
RING, IMPELLER WEAR 610132 - P/N 213718 (CANADA PUMPS STANDARD P/N 3)


MISC:
OLD PART NUMBER 608160-030, BEARINGS USED ON THIS SHAFT ARE 6320-ZZ &


DESCRIPTION:
BOLT, PAN HARDENED WASHERS & SQ. NUT - P/N 22334-0-02


MISC:
BEARING SIZES SKF 3211 (100mm) RADIAL, SKF 7310BG (110mm)THRUST

DESCRIPTION:
STAND, PEDESTAL & CAP  - P/N G-1055R (CANADA PUMPS STANDARD P/N 22 & 23)


DESCRIPTION:
COVER, BEARING INBOARD (CANADA PUMPS STANDARD P/N 24)


DESCRIPTION:
COVER, BEARING OUTBOARD (CANADA PUMPS STANDARD P/N 25)


MISC:
SEE DWG #1132-J1/R2 FOR SUCTION CASING COVER


DESCRIPTION:
SLEEVE, SHAFT (CANADA PUMPS STANDARD P/N 8)


MISC:
SHAFT DWG #9027-J1 WEAR RING DWG #9012-J1

DESCRIPTION:
IMPELLER, 25" DIA., 400BHN 5V W/RING - P/N 314995 (CANADA PUMPS STANDARD P/N 3)


DESCRIPTION:
IMPELLER, 21-5/8" DIA 5V 400BHN W/RING - P/N 314995  (CANADA PUMPS STANDARD P/N 3)


DESCRIPTION:
IMPELLER, 22-1/2" DIA., 400BHN 5V W/RING - P/N 314995  (CANADA PUMPS STANDARD P/N 3)


DESCRIPTION:
IMPELLER, 23 " DIA., 400BHN 5V W/RING - P/N 314995  (CANADA PUMPS STANDARD P/N 3)

NOTES:
26" DIA. MAX. IMPELLER TO BE STATIC BALANCED. PATTERN IN CHINA & INDIA


DESCRIPTION:
IMPELLER, 22" DIA 5V 400BHN  W/RING - P/N 213717B  (CANADA PUMPS STANDARD P/N 3)


MISC:
SHAFT DWG #9027-J1 WEAR RING DWG #9012-J1/213718

DESCRIPTION:
IMPELLER, 20" DIA,M 400BHN 5V W/RING - P/N 314995  (CANADA PUMPS STANDARD P/N 3)


MISC:
SEE 9026-J1 FOR THE SHAFT STK #600859 SAME DWG AS 610875,610835 EXCEPT DIA.

DESCRIPTION:
IMPELLER, 19" DIA. W/O BACK VANES - P/N E00127E040


MISC:
312727 will make in India next time. Jan23,2017

DESCRIPTION:
IMPELLER, 20" DIA 400BHN 8V W/RINGS - P/N 312727  (CANADA PUMPS STANDARD P/N 3)


DESCRIPTION:
IMPELLER, 19-1/2" DIA 430BHN 8V W/RINGS - P/N 312727  (CANADA PUMPS STANDARD P/N 3)


DESCRIPTION:
IMPELLER, 21-1/2" DIA 400BHN 8V W/RINGS - P/N 312727  (CANADA PUMPS STANDARD P/N 3)


DESCRIPTION:
COVER, SUCTION SIDE - P/N D02084E000-1228


DESCRIPTION:
NUT, IMPELLER - P/N 314786 ( (CANADA PUMPS STANDARD P/N 15)


DESCRIPTION:
RING, SPACER CASING - P/N 319182  (CANADA PUMPS STANDARD P/N 9)


DESCRIPTION:
SEAL CAGE SPLIT - P/N 312901  (CANADA PUMPS STANDARD P/N 14A)


DESCRIPTION:
HOUSING, BRACKET & CAP, BEARNG  - P/N 410465  (CANADA PUMPS STANDARD P/N 23 & 33)


DESCRIPTION:
BUSHING, THROAT  - P/N 310939  (CANADA PUMPS STANDARD P/N 11)


DESCRIPTION:
SHAFT, 10X12DSH STD ALL SEALS 3.50" DIA.  (CANADA PUMPS STANDARD P/N 8 & 14A)


DESCRIPTION:
SCREW, IMPELLER NUT LOCKNG  (CANADA PUMPS STANDARD P/N 16A)


MISC:
SAME AS 610824 EXCEPT FOR ADDED LABYSEAL (May7,2017.Windalco didn't use the laby seal)

DESCRIPTION:
HOUSING, BRACKET & CAP, BEARNG C/W LABYSEAL - P/N G-4316  (CANADA PUMPS STANDARD P/N 22, 23, 30E & 33)


MISC:
NITRIL 90 DUROMETER  (SEE DWG 1714B-J1 FOR ALUMINUM BRONZE MATERIAL RING)


MISC:
#2 LIME MILL 6' X 22 HARDINGE MILL 08-ME-02

DESCRIPTION:
BAR, LIFTER, HEAT RESISTANT  - P/N 165-11BNA


DESCRIPTION:
RING, CASING - P/N 660648  (CANADA PUMPS STANDARD P/N 9)


DESCRIPTION:
IMPELLER, 25-1/2" DIA., 400BHN 5V W/RING - P/N 314995  (CANADA PUMPS STANDARD P/N 3 & 4)


DESCRIPTION:
IMPELLER, 26" DIA., 400BHN 5V W/RING -  P/N 314995  (CANADA PUMPS STANDARD P/N 3 & 4)


DESCRIPTION:
SHAFT, FLXSL STD - P/N 312542  (CANADA PUMPS STANDARD P/N 7)

NOTES:
SHAFT USES SKF 3313 BEARINGS, #45STL=$600.00


MISC:
SHAFT DWG #9056-J1. John quoted $560 05/15

DESCRIPTION:
SLEEVE,  6" LONG STD  (CANADA PUMPS STANDARD P/N 9)


DESCRIPTION:
SLEEVE, SHAFT - P/N G-6973  (CANADA PUMPS STANDARD P/N 8)


DESCRIPTION:
COVER, CASING SPLIT REMOVABLE  - P/N 412481  (CANADA PUMPS STANDARD P/N 2 & 2A)


DESCRIPTION:
IMPELLER, 20" DIA W/O BACK VANE - P/N E00049E0401228

NOTES:
SAME DRAWING AS STOCK NUMBERS 600875 EXCEPT DIAMETER


DESCRIPTION:
SHAFT, FLXSL + SLEEVE - P/N 312542  (CANADA PUMPS STANDARD P/N 8 & 8A)


DESCRIPTION:
RING, CASING - P/N SK2138-AJ - P/N 213719  (CANADA PUMPS STANDARD P/N 9)


DESCRIPTION:
IMPELLER, 22-3/8" DIA 400BHN 8V W/RINGS - P/N 312727  (CANADA PUMPS STANDARD P/N 3 & 4)


DESCRIPTION:
IMPELLER, 21" DIA 400BHN 8V W/RINGS - P/N 312727  (CANADA PUMPS STANDARD P/N 3 & 4)


DESCRIPTION:
HOUSING, BRACKET & CAP, BEARING - P/N 313922


DESCRIPTION:
IMPELLER, 8-1/2" DIA W/RING - P/N G-6401R  (CANADA PUMPS STANDARD P/N 3 & 3A)


MISC:
B4 FRAME SEE DWG #9025-J1 FOR THE IMPELLER STK #600875


DESCRIPTION:
RING, CASING - P/N G-3006R  (CANADA PUMPS STANDARD P/N 9)


DESCRIPTION:
BOLT, GLAND SWING & NUT - P/N 311806  (CANADA PUMPS STANDARD P/N 13A & 13B)


DESCRIPTION:
COVER, BEARING INBOARD - P/N G-6189  (CANADA PUMPS STANDARD P/N 24)


DESCRIPTION:
COVER, BEARING OUTBOARD - P/N G-6190  (CANADA PUMPS STANDARD P/N 25)


DESCRIPTION:
FLINGER, INBOARD - P/N G-1045  (CANADA PUMPS STANDARD P/N 18A)


DESCRIPTION:
NUT, IMPELLER - P/N G-1971R2  (CANADA PUMPS STANDARD P/N 15)


DESCRIPTION:
SCREW, FOR IMPELLER - P/N G-6402A  (CANADA PUMPS STANDARD P/N 15A)

NOTES:
(37031-QTY.4)**PRICES SOLD TO WINDALCO $10.00.**


DESCRIPTION:
KEY, IMPELLER (CANADA PUMPS STANDARD P/N 17 & 17B)


DESCRIPTION:
RING, LANTERN SEAL CAGE  -  P/N 312899  (CANADA PUMPS STANDARD P/N 14)


DESCRIPTION:
IMPELLER, 21-1/2" DIA. 400Bhn  3V W/RING - P/N  (CANADA PUMPS STANDARD P/N 3, 3A & 4)


DESCRIPTION:
BUSHING, THROAT  - P/N G-7189  (CANADA PUMPS STANDARD P/N 11)


DESCRIPTION:
IMPELLER, 9" DIA W/RING - P/N G-6401R  (CANADA PUMPS STANDARD P/N 3, 3A & 4)


DESCRIPTION:
IMPELLER, 9-1/2" DIA 400BHN W/RING - P/N G-6401R  (CANADA PUMPS STANDARD P/N 3, 3A & 4)

NOTES:
(37031 QTY. 2) **PRICE SOLD TO WINDALCO $987.25**  INVOICE CAME TO US.


DESCRIPTION:
IMPELLER, 9-3/4" DIA 400BHN W/RING  - P/N G-6401R (CANADA PUMPS STANDARD P/N 3, 3A & 4)


DESCRIPTION:
IMPELLER, 10" DIA W/RING - P/N G-6401R (CANADA PUMPS STANDARD P/N 3, 3A & 4)


DESCRIPTION:
IMPELLER, 10-3/8" DIA W/RING - P/N G-6401R (CANADA PUMPS STANDARD P/N 3, 3A & 4)


DESCRIPTION:
IMPELLER, 11-1/2" DIA W/RING  - P/N G-6401R (CANADA PUMPS STANDARD P/N 3, 3A & 4)


DESCRIPTION:
FLINGER, OUTBOARD - P/N G-1051 (CANADA PUMPS STANDARD P/N 18B)


DESCRIPTION:
RING, IMPELLER WEAR - P/N G-5808 (CANADA PUMPS STANDARD P/N 3, 3A & 4)


DESCRIPTION:
CASING, C/W  - P/N 410292-3 (CANADA PMUPS STANDARD P/N 2)


DESCRIPTION:
RING, CASING - P/N G-3006R (CANADA PMUPS STANDARD P/N 9)


DESCRIPTION:
BOLT, GLAND SWING & NUT - P/N 310349  (CANADA PMUPS STANDARD P/N 13A & 13B)


DESCRIPTION:
GLAND, SPLIT - P/N 310501  (CANADA PMUPS STANDARD P/N 12A)


DESCRIPTION:
LANTERN RING, SEAL CAGE  - P/N 312899  (CANADA PMUPS STANDARD P/N 14)


DESCRIPTION:
SLEEVE, SHAFT - 43HRC  (CANADA PMUPS STANDARD P/N 8)


DESCRIPTION:
BUSHING, THROAT  - P/N G-7189  (CANADA PMUPS STANDARD P/N 11)


DESCRIPTION:
IMPELLER, 11-1/2" DIA - P/N 310402  (CANADA PMUPS STANDARD P/N 3 &3A)


DESCRIPTION:
NUT, IMPELLER - P/N G-1971R2  (CANADA PMUPS STANDARD P/N 15)


DESCRIPTION:
SCREW, IMPELLER NUT LOCKING - P/N G-6402A  (CANADA PMUPS STANDARD P/N 16A)


DESCRIPTION:
KEY, IMPELLER  (CANADA PMUPS STANDARD P/N 17 & 17B)


DESCRIPTION:
THROAT BUSHING - P/N 312469  (CANADA PMUPS STANDARD P/N 11)


DESCRIPTION:
IMPELLER, 10-1/2" DIA  - P/N G-1973R  (CANADA PMUPS STANDARD P/N 3)


DESCRIPTION:
SHAFT, FLXSL 10X12DS  (CANADA PMUPS STANDARD P/N 7)


DESCRIPTION:
SLEEVE, SHAFT - P/N 319341 (CANADA PUMPS STANDARD P/N 8)


MISC:
SLEEVE DWG #9043-J1 IMPELLER DWG #4014-J1/R4

DESCRIPTION:
SHAFT, FLXSL + SLEEVE RH - P/N 319339 (CANADA PUMPS STANDARD P/N 7 & 7C)


MISC:
SEE DWG #9029-J1 STK #610863 FOR SHORT SLEEVE (7.5") & SHAFT DWG#9028-J1 STK #610861

DESCRIPTION:
SLEEVE, SHAFT STD LNGTH 10-1/8" - P/N 312543 (CANADA PUMPS STANDARD 7)


DESCRIPTION:
IMPELLER, 8-3/8" DIA. 2ND STAGE CW  - P/N G-7457


DESCRIPTION:
IMPELLER, 8-3/8" DIA. 3RD STAGE CW  - P/N G-7457


DESCRIPTION:
IMPELLER, 8-3/8" DIA. 4TH STAGE CW  - P/N G-7457


DESCRIPTION:
CASING, W/STUFFING BOX DWG#411335  (CANADA PMUPS STANDARD P/N 2, 2A & 6)


DESCRIPTION:
RING, WEAR CASING - P/N 312517  (CANADA PMUPS STANDARD P/N 9)


MISC:
K2 FASTNERS, EDMONTON. 3-3/16"LONG X 1" DIA. EYE I.D. X 1/2" N.C. 316SS

DESCRIPTION:
BOLT & NUT, GLAND SWING 1/2" - P/N 310340  (CANADA PMUPS STANDARD P/N 13A & 13B)


DESCRIPTION:
COVER, HAND HOLE ASTM A532 HARD CHROME  (CANADA PMUPS STANDARD P/N 42)


MISC:
NOTE: SHAFT IS USED WITH PACKING AND NEW SEAL DESIGNS SUPPLIED BY CRS.

DESCRIPTION:
SHAFT, & SLEEVE ASSY. 4X6DSH  (CANADA PMUPS STANDARD P/N 8)


DESCRIPTION:
SLEEVE,  BEARING SPACER- P/N 310103  (CANADA PMUPS STANDARD P/N 41)


DESCRIPTION:
COVER, BEARING INBOARD  -P/N G-6338  (CANADA PMUPS STANDARD P/N 24)


DESCRIPTION:
COVER, BEARING OUTBOARD - P/N G-6337R  (CANADA PMUPS STANDARD P/N 25)


DESCRIPTION:
FLINGER, INBOARD - P/N G-1223  (CANADA PMUPS STANDARD P/N 18A)


DESCRIPTION:
FLINGER, OUTBOARD - P/N G-1249  (CANADA PMUPS STANDARD P/N 18B)


DESCRIPTION:
GLAND, SPLIT - P/N 312308-A  (CANADA PMUPS STANDARD P/N 12A)


DESCRIPTION:
NUT, IMPELLER - P/N G-1219-2  (CANADA PMUPS STANDARD P/N 15)


DESCRIPTION:
NUT, IMPELLER NUT L/SCREW - P/N G-5520  (CANADA PMUPS STANDARD P/N 15 & 15A)


DESCRIPTION:
RING, KEY PROTECTING - P/N 312125  (CANADA PMUPS STANDARD P/N 48)


DESCRIPTION:
SLEEVE, SHAFT STD LENGTH 6" - P/N 312129  (CANADA PMUPS STANDARD P/N 8)


DESCRIPTION:
BUSHING, THROAT - G-3004  (CANADA PMUPS STANDARD P/N 11)


DESCRIPTION:
IMPELLER, 11-3/4" DIA 400BHN 3V - P/N 319181A  (CANADA PMUPS STANDARD P/N 3 & 3A)


DESCRIPTION:
IMPELLER, 12-1/2" DIA 400BHN 3V C/W BVL RNG - P/N 319181A (CANADA PMUPS STANDARD P/N 3 & 3A)


DESCRIPTION:
IMPELLER, 13-1/4" DIA 400BHN 3V - P/N 319181A (CANADA PMUPS STANDARD P/N 3 & 3A)


DESCRIPTION:
IMPELLER, 14-3/16" DIA 400BHN 3V - P/N 319181A (CANADA PMUPS STANDARD P/N 3 & 3A)


DESCRIPTION:
RING, IMPELLER WEAR - P/N 312728 440bhn (CANADA PMUPS STANDARD P/N 4)


MISC:
BOLT ON TYPE SPECIAL FOR CEFILAC SEAL USE.

DESCRIPTION:
BOX, STUFFING FOR CEFILAC SEAL SERIES - P/N SK-EW-111-JK


DESCRIPTION:
BOLT & NUT, GLAND SWING TYPE  - P/N G-1254 (CANADA PMUPS STANDARD P/N 13A & 13B)


DESCRIPTION:
FLINGER, INBOARD - P/N G-1250 (CANADA PMUPS STANDARD P/N 18A)


DESCRIPTION:
NUT, IMPELLER RH - P/N G-2090 (CANADA PMUPS STANDARD P/N 15)


DESCRIPTION:
IMPELLER, 14-5/8" DIA 400BHN 3V - P/N 319181A (CANADA PMUPS STANDARD P/N 3 & 3A)


DESCRIPTION:
IMPELLER, 15-3/4" DIA 400BHN 3V - P/N 319181A (CANADA PMUPS STANDARD P/N 3 & 3A)


DESCRIPTION:
IMPELLER, 16" DIA 400BHN 3V - P/N 319181A (CANADA PMUPS STANDARD P/N 3 & 3A)


DESCRIPTION:
IMPELLER, 16-1/2" DIA 400BHN 3V - P/N 319181A (CANADA PMUPS STANDARD P/N 3 & 3A)


DESCRIPTION:
RING, IMPELLER WEAR - P/N 314985 (CANADA PMUPS STANDARD P/N 4)


DESCRIPTION:
RING, IMPELLER WEAR - P/N 210962 (CANADA PMUPS STANDARD P/N 4)


DESCRIPTION:
IMPELLER, 14-1/8" DIA 400BHN 3V - (CANADA PMUPS STANDARD P/N 3 & 3A)


DESCRIPTION:
IMPELLER, 13-1/2" DIA 400BHN 3V - 319181A (CANADA PMUPS STANDARD P/N 3 & 3A)


DESCRIPTION:
SHAFT & SLEEVE ASSY - P/N 312500 (CANADA PMUPS STANDARD P/N 8)


DESCRIPTION:
SLEEVE, SHAFT - P/N 312068 (CANADA PMUPS STANDARD P/N 8)


DESCRIPTION:
BOX, STUFFING SPLIT  - P/N 213777 (CANADA PMUPS STANDARD P/N 47)


DESCRIPTION:
HOUSING, THRUST BEARING - P/N G-4009(CANADA PUMPS STANDARD P/N 38B)


DESCRIPTION:
BEARING CAP THRUST  - P/N G-2552 (CANADA PUMPS STANDARD P/N 23)


DESCRIPTION:
SEAL, THRUST BEARING - P/N G-4076 (CANADA PUMPS STANDARD P/N 27)


DESCRIPTION:
BEARING COLLAR THRUST  - P/N G-6612 (CANADA PUMPS STANDARD P/N 35B)


DESCRIPTION:
CASING - P/N 410390-1 (CANADA PUMPS STANDARD P/N 2)


DESCRIPTION:
BUSHING/SLEEVE, INTERSTAGE DIAHPRAGM 375-400BHN  - P/N 311343


DESCRIPTION:
BUSHING, INTERSTAGE DIAPHRAGM - P/N 311342


DESCRIPTION:
IMPELLER, 7-1/2" DIA 400BHN 4V CW - P/N 311334


DESCRIPTION:
IMPELLER, 7-1/2" DIA 400BHN 4V CCW - P/N 311334


DESCRIPTION:
IMPELLER, 9" DIA 400BHN 4V C/W - P/N 311334

NOTES:
JULY/11 SOLD FOR $493.00, ** PATTERN PRICE 486.00**


DESCRIPTION:
GLAND, SPLIT (CANADA PMUPS STANDARD P/N 12 & 12A)


DESCRIPTION:
KEY, IMPELLER (CANADA PMUPS STANDARD P/N 17B)


DESCRIPTION:
COVER, BEARING INBOARD (CANADA PMUPS STANDARD P/N 24)


DESCRIPTION:
FRAME FOOT (CANADA PMUPS STANDARD P/N 252)


DESCRIPTION:
COVER, HAND HOLE SUCTION - P/N G-2919 (CANADA PMUPS STANDARD P/N 42A)


DESCRIPTION:
BEARING SEAL PLATE INBOARD   - P/N G-6161


DESCRIPTION:
BEARING SEAL PLATE OUTBOARD - P/N G-6160


DESCRIPTION:
IMPELLER, 15-3/4" DIA W/RINGS - P/N G-4369


DESCRIPTION:
IMPELLER, 17-3/4" DIA W/RINGS - P/N G-4369


DESCRIPTION:
IMPELLER, 16-1/2" DIA W/RINGS - P/N G-4369


DESCRIPTION:
NUT, IMPELLER L/SCREW RH  - P/N G-5520 (CANADA PMUPS STANDARD P/N 15 & 15A)


MISC:
5/8" x 5/8" x 5-1/2" long mild steel material

DESCRIPTION:
KEY, IMPELLER (CANADA PMUPS STANDARD P/N 17 & 17B)


DESCRIPTION:
LANTERN RING, SPLIT, SEAL CAGE- P/N 313103 (CANADA PMUPS STANDARD P/N 14A)


DESCRIPTION:
BUSHING, THROAT   - P/N G-3025 (CANADA PMUPS STANDARD P/N 11)


DESCRIPTION:
IMPELLER, 14-1/4" DIA 3V W/RING  - P/N G-6831 ((CANADA PMUPS STANDARD P/N 3, 3A & 4)


DESCRIPTION:
IMPELLER, 15-1/4" DIA 3V W/RING  - P/N G-6831 (CANADA PMUPS STANDARD P/N 3, 3A & 4)


DESCRIPTION:
IMPELLER, 16" DIA 3V W/RING  - P/N G-6831 (CANADA PMUPS STANDARD P/N 3, 3A & 4)


DESCRIPTION:
IMPELLER, 16-1/2" DIA 3V W/RINGS - P/N G-6831 (CANADA PMUPS STANDARD P/N 3, 3A & 4)


DESCRIPTION:
RING, IMPELLER  - P/N G-6832 (CANADA PMUPS STANDARD P/N 4)


DESCRIPTION:
ASSEMBLY DRAWING, CANADA PUMPS 4X6 DSH - P/N 464926


MISC:
SHOWS PARTS AND ASSY VIEW OF DSH PUMPS. READ WITH X-131 FOR PART NAMES ATTACHED TO THIS DWG.

DESCRIPTION:
DSH CUTVIEW/PARTS LIST DRAWING - P/N 660648


DESCRIPTION:
RING, CASING - P/N G-1882 OLD STYLE (CANADA PMUPS STANDARD P/N 9)


DESCRIPTION:
SLEEVE,  BEARING SPACER  -  P/N 310908 (CANADA PMUPS STANDARD P/N 41)


DESCRIPTION:
COVER, BEARING OUTBOARD - P/N G-6337 (CANADA PMUPS STANDARD P/N 25)


DESCRIPTION:
FLINGER, INBOARD - P/N 310910 (CANADA PMUPS STANDARD P/N 18A)


DESCRIPTION:
FLINGER, OUTBOARD -  P/N 210592 (CANADA PMUPS STANDARD P/N 18B)


DESCRIPTION:
NUT, IMPELLER L/SCREW  - P/N 315130 (CANADA PMUPS STANDARD P/N 16A)


DESCRIPTION:
KEY, IMPELLER (CANADA PMUPS STANDARD P/N 3 & 3A)


DESCRIPTION:
BOLT & NUT, GLAND SWING  - P/N 310340 (CANADA PMUPS STANDARD P/N 13A &13B)


DESCRIPTION:
IMPELLER, 16-1/2" DIA., 400Bhn 3V W/RNG  - P/N 314992 (CANADA PMUPS STANDARD P/N 3, 3A & 4)


DESCRIPTION:
IMPELLER, 18" DIA., 400Bhn 3V W/RINGS  - P/N 314992 (CANADA PMUPS STANDARD P/N 3, 3A & 4)


DESCRIPTION:
IMPELLER, 20" DIA., 400Bhn 3V W/RING - P/N 314992 (CANADA PMUPS STANDARD P/N 3, 3A & 4)


DESCRIPTION:
IMPELLER, 23" DIA., 400Bhn 3V W/RING  - P/N 314992 (CANADA PMUPS STANDARD P/N 3, 3A & 4)


DESCRIPTION:
IMPELLER, 16-1/2" DIA., 400Bhn 3V W/RINGS  - P/N 314992 (CANADA PMUPS STANDARD P/N 3, 3A & 4)


DESCRIPTION:
IMPELLER, 19-1/2" DIA 400BHN 3V W/RINGS - 314992 (CANADA PMUPS STANDARD P/N 3, 3A & 4)


DESCRIPTION:
IMPELLER, 15-1/2" DIA 400BHN 3V W/RINGS (CANADA PMUPS STANDARD P/N 3, 3A & 4)


DESCRIPTION:
RING, IMPELLER WEAR - P/N (CANADA PMUPS STANDARD P/N 4)


DESCRIPTION:
RING, SPACER - P/N 214701 HARD CHROME (CANADA PMUPS STANDARD P/N 121)


DESCRIPTION:
SHAFT, FLXSL 10X12-22.5 S (CANADA PUMPS STANDARD P/N 7)


DESCRIPTION:
SHAFT, FLXSL STD - P/N 312542 (CANADA PUMPS STANDARD P/N 7)


DESCRIPTION:
COVER, BEARING INBOARD - P/N 312537 (CANADA PUMPS STANDARD P/N 24)


DESCRIPTION:
COLLAR, BEARING -  P/N 311035 (CANADA PUMPS STANDARD P/N 35B)


DESCRIPTION:
FLINGER, OUTBOARD - P/N 312540 (CANADA PUMPS STANDARD P/N 18B)


DESCRIPTION:
FLINGER, INBOARD - P/N 310020 (CANADA PUMPS STANDARD P/N 18A)


DESCRIPTION:
SEAL CAGE SPLIT  - P/N 312902 (CANADA PUMPS STANDARD P/N 14A)


DESCRIPTION:
THROAT BUSHING - P/N 316549 (CANADA PUMPS STANDARD P/N 11)


DESCRIPTION:
KEY, IMPELLER (CANADA PUMPS STANDARD P/N 17B)


DESCRIPTION:
IMPELLER, 18" DIA 400BHN 8V W/ RINGS - P/N 312727 (CANADA PUMPS STANDARD P/N 4)


DESCRIPTION:
IMPELLER, 18-3/8" DIA 400BHN 8V W/RINGS - P/N 312727 (CANADA PUMPS STANDARD P/N 4)


DESCRIPTION:
IMPELLER, 18-3/4" DIA 400BHN 8V W/RINGS - P/N 312727 (CANADA PUMPS STANDARD P/N 4)


DESCRIPTION:
SHAFT, & PLASMAS SLV - P/N 312542 (CANADA PUMPS STANDARD P/N 9)


DESCRIPTION:
DRAWING OF SHAFTS USED AT WINDALCO PLANTS - A-OE-724-AJ-1


DESCRIPTION:
SEAL CAGE SPLIT  - P/N 314313 (CANADA PUMPS STANDARD P/N 14A)


DESCRIPTION:
THROAT BUSHING - P/N 314065 (CANADA PUMPS STANDARD P/N 11)


MISC:
SHAFT DWG #9027-J1, IMPELLER DWG #4014-J1/R4

DESCRIPTION:
NUT, IMPELLER RH - P/N 314061 (CANADA PUMPS STANDARD P/N 15)


DESCRIPTION:
RINGS DWG, WEAR & CLEARANCE FOR WINDALCO PUMPS - A-OE-724-AJ-2


MISC:
SHAFT DWG #9027-J1  IMPELLER DWG #4014-J1/R4

DESCRIPTION:
NUT, IMPELLER LH - P/N 314061 (CANADA PUMPS STANDARD P/N 15)


DESCRIPTION:
SHAFTS DWG, ALL SIZES USED AT WINDALCO - A-OE-724-AJ-3


MISC:
SHAFT DWG #9027-J1,WEAR RING DWG #9012-J1

DESCRIPTION:
IMPELLER, 17-5/8" DIA., 400BHN 5V W/RING - P/N 314995 (CANADA PUMPS STANDARD P/N 3 & 4)


MISC:
SHAFT DWG #9027-J1, WEAR RING DWG #9012-J1

DESCRIPTION:
IMPELLER, 18-5/8" DIA., 400BHN 5V W/RING - P/N 314995 (CANADA PUMPS STANDARD P/N 3 & 4)


DESCRIPTION:
IMPELLER, 19-3/4" DIA. 400BHN 5V W/RING - P/N 314995 (CANADA PUMPS STANDARD P/N 3 & 4)


DESCRIPTION:
IMPELLER, 21" DIA., 400BHN 5V W/RING - P/N 314995 (CANADA PUMPS STANDARD P/N 3 & 4)


DESCRIPTION:
IMPELLER, 21-1/4" DIA., 400BHN 5V W/RING - P/N 314995 (CANADA PUMPS STANDARD P/N 3 & 4)


DESCRIPTION:
IMPELLER, 19" DIA., 400BHN 5V W/RING - P/N 314995 (CANADA PUMPS STANDARD P/N 3 & 4)


DESCRIPTION:
RING, WEAR IMPELLER - P/N 314996 (CANADA PUMPS STANDARD P/N 4)


MISC:
SUPERSEDES DWG #660460 DATED 1968 INTMPE DWG #9061-J1

DESCRIPTION:
DRAWING OF PARTS LIST & SECTIONAL  - P/N 1992


DESCRIPTION:
RING, CASING - BEVEL - P/N 211452 (CANADA PMUPS STANDARD P/N 9)


DESCRIPTION:
RING, IMPELLER WEAR  - P/N 212850 (CANADA PMUPS STANDARD P/N 4)


DESCRIPTION:
IMPELLER, 9" DIA W/RING-BEVEL - P/N 262146 (CANADA PMUPS STANDARD P/N 3, 3A & 4)


DESCRIPTION:
IMPELLER, 9-1/4" DIA 400BHN W/RING-BEVEL - P/N 262146 (CANADA PMUPS STANDARD P/N 3, 3A & 4)


DESCRIPTION:
IMPELLER, 9-1/2" DIA 400BHN W/RING-BEVEL - P/N 262146 (CANADA PMUPS STANDARD P/N 3, 3A & 4)


DESCRIPTION:
IMPELLER, 9-3/4" DIA 400BHN W/RING-BEVEL - P/N 262146 (CANADA PMUPS STANDARD P/N 3, 3A & 4)


DESCRIPTION:
IMPELLER, 10" DIA W/RING - P/N 262146 (CANADA PMUPS STANDARD P/N 3, 3A & 4)


DESCRIPTION:
IMPELLER, 10-3/8" DIA W/RING-BEVEL - P/N 262146 (CANADA PMUPS STANDARD P/N 3, 3A & 4)


DESCRIPTION:
IMPELLER, 10-3/4" DIA W/RING-BEVEL - P/N 262146 (CANADA PMUPS STANDARD P/N 3, 3A & 4)


DESCRIPTION:
IMPELLER, 11-3/4" DIA W/RING-BEVEL - P/N 262146 (CANADA PMUPS STANDARD P/N 3, 3A & 4)


DESCRIPTION:
COVER, BEARING OUTBOARD (CANADA PMUPS STANDARD P/N 25)


DESCRIPTION:
RING, IMPELLER WEAR - P/N 311992 (CANADA PMUPS STANDARD P/N 4)


DESCRIPTION:
SHAFT - P/N 319343 (CANADA PMUPS STANDARD P/N 7)


DESCRIPTION:
CASING, STFNG BOX, MDFD, 10X12S - P/N 412214-5 (CANADA STANDARD P/N 2, 2A & 6)


DESCRIPTION:
IMPELLER, 21" DIA 400BHN 8V W/RINGS - P/N 312727 (CANADA PUMPS STANDARD P/N 3& 4)


DESCRIPTION:
STUD & NUT, GLAND (CANADA PMUPS STANDARD P/N 13 & 13B)


DESCRIPTION:
RING, CASING WEAR G-3006R (CANADA PMUPS STANDARD P/N 9)


DESCRIPTION:
IMPELLER, 9" DIA 400BHN 4V CCW - P/N 311334 (CANADA PMUPS STANDARD P/N 3 & 3A)

NOTES:
SEE DWG #9107-J1 FOR CW IMPELLER, 4 VANES


DESCRIPTION:
CASING & COVER - P/N 410338 (CANADA PMUPS STANDARD P/N 2 & 2A)


DESCRIPTION:
BOLT, 3/4" C/WITH FLAT WASHER - P/N K25-8305GR5


DESCRIPTION:
MANHOLE PLATE, W=450, L=435, C/W REINFORCEMENT #K35-4324-102


DESCRIPTION:
GASKET, CASING (CANADA PMUPS STANDARD P/N  65)


DESCRIPTION:
FRAME, BEARING - (CANADA PMUPS STANDARD P/N 22)


DESCRIPTION:
COVER, BEARING OUTBOARD. 400BHN - P/N G-6190 (CANADA PMUPS STANDARD P/N 25)


DESCRIPTION:
RING, CASING WEAR - 213230 (CANADA PMUPS STANDARD P/N 9)


NOTES:
SAME DRAWING AS STOCK NUMBER 600835 EXCEPT DIAMETER


MISC:
SHAFT DWG#9027-J1, WEAR RING DWG #9012-J1

DESCRIPTION:
IMPELLER, 26 1/2" DIA., 400BHN 5V W/RING - P/N 341995 (CANADA PUMPS STANDARD P/N 4)


MISC:
B3 FRAME 1079 GPM @ 85'TDH, 1000RPM SG 1.36 TEMP 146 DEG.F USING 60HP MOTOR

DESCRIPTION:
CLAMP, BEARING HSG FRAME B3 - P/N C00813E000-2201


MISC:
AS 568-472, B3 FRAME 1079GPM @ 85'TDH SG1.36, 1000RPM PUMP USING 60HP,


MISC:
AS568-468, B3 FRAME 1079GPM @ 85'TDH SG1.36, 1000RPM PUMP USING 60HP,


MISC:
AS568-462, B2 FRAME 800GPM @ 100'TDH SG1.55, 1000RPM PUMP USING 60HP,


MISC:
B2 FRAME 800GPM @ 140'TDH SG1.3, 1500RPM PUMP USING 125HP,


MISC:
AS 568-460, B2 FRAME 800GPM @ 100'TDH SG1.55, 1000RPM PUMP USING 60HP,


DESCRIPTION:
COVER, STUFFING BOX - P/N D00213E0001055


MISC:
USES BEARINGS SKF #21320 ( 215mm) RADIAL & TIMKEN TDO-93400 (112mm) THRUST


DESCRIPTION:
STUDS, GLAND (CANADA PMUPS STANDARD P/N 13)


DESCRIPTION:
PLATE, BEARING - P/N 212013 (CANADA PMUPS STANDARD P/N 30A)


DESCRIPTION:
IMPELLER, 17" DIA. 3V 400BHN - P/N 411744 (CANADA PMUPS STANDARD P/N 3)


DESCRIPTION:
IMPELLER, 11-3/4"DIA 3V 400BHN - P/N 411744 (CANADA PMUPS STANDARD P/N 3)


DESCRIPTION:
IMPELLER, 22-1/2" DIA 400BHN 8V W/RINGS - P/N 312727 (CANADA PMUPS STANDARD P/N 3 & 4)


DESCRIPTION:
IMPELLER, 20-1/2" DIA., 400BHN W/RING - P/N 213717B (CANADA PMUPS STANDARD P/N 3 & 4)


DESCRIPTION:
CASING, W/STUFFING BOX -P/N 511163 (CANADA PMUPS STANDARD P/N 2, 2A & 6)


DESCRIPTION:
LUBE SUPPLY LINE PRESSURE GAGE KIT - P/N 04-121668


DESCRIPTION:
RING, SPACER - P/N 211453 (CANADA PMUPS STANDARD P/N 121)


DESCRIPTION:
SCREW, LOCKING - (CANADA PMUPS STANDARD P/N 15A)


DESCRIPTION:
BEARING BALL, RADIAL (CANADA PMUPS STANDARD P/N 26)


MISC:
B4 POWER FRAME, TIMKEN#23032CC O.D. =  9.4488/240mm      I.D. = 6.2992/160mm SPHERICAL ROLLER BEARING


NOTES:
CUP AND CONE SET, 2 REQUIRED, ONE FOR EACH END OF THE CRANK SHAFT.


DESCRIPTION:
PLATE, HEAD 27-7/8" long. 165-65K 8FT DIA. BALL MILL


DESCRIPTION:
BAR, LIFTER 165-110 BNA, (13 USED EACH TIME)


DESCRIPTION:
BAR, LIFTER, SHELL, 165-125RNA 840MM LONG


MISC:
OLD CROFT GB FOOT PRINT = 940mm x 635mm CENTER TO CENTER FOOT PRINT PATTERN. NEW = 950mm x 475mm

DESCRIPTION:
REDUCER,  GEAR BOX MPGB450, RATIO 7.48:1


DESCRIPTION:
TUBE, SEAMLESS 22' L X 1.98/2.00 WT 12BWG(2.77MM)


MISC:
FLEX BUSHING NEOPRENE INSERT FOR DRIVE SHAFT. LORD MFG #BJ-1205


DESCRIPTION:
NOZZLE, SPIRAL TARGET CROSS FLOW #368-3738-084


DESCRIPTION:
DRIFT ELIMINATOR 6ft Long X 10in High X 6in Wide #D25142

NOTES:
BRENTWOOD COOLING TOWER PARTS AWCT09701, #CF150MAX155.25X12X72-RPVC-DG


DESCRIPTION:
CROSS BAR, 1.625 X 1 X 4' LONG (REPLACES WOOD)


MISC:
ALPHA III CROSS FLOW SPLASH GRID. 12 GUAGE WIRE HANGER PVC COATED.


MISC:
CTD-42FR-8. FRP CASING PANELS, 4.2 Corrugated. CUT TO SIZES 46.5" X 19.5" for INLET VANES ON OUTSIDE TOWER 9166-J1

DESCRIPTION:
PANEL, SIDE WALL CRGTD, 12 OZ. 42" X 150"

NOTES:
GLASTEEL MFG. 42L12SL0430015000, 4.2 CORIGATED 12OZ SBS LT GRAY 42 X 150


DESCRIPTION:
CORNER MOLD, L SHAPE 6" X 6" X 96" FIRE RETARDENT

NOTES:
MFG. GLASTEEL CNR ROLL GR 12OZ SBS GRAY 12 X 96 #CRG12SNG129909602


DESCRIPTION:
CLOSURE STRIP, BLK/NPRN 4.2 CRGTD, BOX 300' LONG


MISC:
SPECIAL LUBRICANT Lomu + 410SS TRIM PTFE/VITON

DESCRIPTION:
PLUG VALVE, 6" ASA 125# C.I. PLG, WRNCH, LoMu LUBE

NOTES:
FACE TO FACE = 267MM WITH 279MM DIA. FLANGES


MISC:
VALVE IS A216WCB BODY, SPECIAL LUBRICANT Lomu + 410SS TRIM PTFE/VITON

DESCRIPTION:
PLUG VALVE, 3" ASA 125# C.I. PLG, WRNCH, LoMu LUBE

NOTES:
FACE TO FACE 203MM X ANSI 125 FLANGES 184MM DIA.


DESCRIPTION:
PLUG VALVE, 10" ASA 125# C.I. PLG, WRNCH, LoMu LUBE


DESCRIPTION:
VALVE, DISC LP VALVES ONLY  P/N 1002-2255-00


DESCRIPTION:
VALVES, BUFFER DISC LP & HP  P/N 1000-4688


DESCRIPTION:
SHAFT, LOWER W/BUSHINGS INTMPE #8037A-J1


DESCRIPTION:
IDLER ROLLER  (ADAPTATION) INTMPE DWG#4024-J1


DESCRIPTION:
GASKET, FRAME END, PLATE  P/N 16-506-007


DESCRIPTION:
SEAL-BUNA N.  75-7/8" LONG FOR GROOVE DWG #2183-J1


DESCRIPTION:
PLUG VALVE, 12" ASA 125# C.I. PLG, WRNCH, LoMu LUBE


DESCRIPTION:
SHAFT, 10X12S STD ALL SEALS 2.75" DIA. (CANADA PUMPS STANDARD P/N 7)


DESCRIPTION:
SHAFT, 12X14S STD ALL SEALS 3.875 DIA.(CANADA PUMPS STANDARD P/N 7)


MISC:
DWG #510342/7 DUCTILE IRON 600 IS 280 BHN WITH 600,000# TENSILE STRENGTH

DESCRIPTION:
CASING,  C/W BEARING UNITS 430BHN  - P/N 510342/7


DESCRIPTION:
VALVE, SUCTION F55 SS.WG, GAS-102-969-AO5


DESCRIPTION:
SEALER,DISCHARGE END A=60,B=16,C=10 P/N K 400003


DESCRIPTION:
LIFTER BAR 165-11 BNA,HEAT RESISTANT RUBBER. #2


DESCRIPTION:
MANHOLE COVER PLATE ITEM 11 PP55: 55 X 266 X 393 PP


DESCRIPTION:
DISCHARGE HEAD LIFTER BAR, ITEM 17 LFW 150 X 115


DESCRIPTION:
BOLT,CLAMPING BAR PN 26-117-194-002 (REPLACES P/N 4010-0)


DESCRIPTION:
STAND, PEDESTAL & CAP (CANADA PUMPS STANDARD P/N 22 & 23)


DESCRIPTION:
GASKET, SUCTION (CANADA PUMPS STANDARD P/N 65A)


DESCRIPTION:
TUBE, BOILER S.W. 2" O.D. X 0.134" X 28' LONG


MISC:
3.525" X 5.00 LONG X 2.195" I.D. WITH 3/16" SPIRAL OIL GROOVE


DESCRIPTION:
FLINGER, OUTBOARD (CANADA PUMPS STANDARD P/N 18B)


MISC:
B2 BEARING FRAME. ASSY IS SHAFT, LOCK WASHER & NUT


MISC:
2 in one set. Air cost (8sets) India to Kingston $270

NOTES:
3 layer - steel(MS) -Copper Alloy- Babbitt lining.Load bearing capacity this bearing is more.


DESCRIPTION:
SEAL, MECHANICAL CEFILAC GPA 60.35 D264.00


DESCRIPTION:
SEAL, MECHANICAL CEFILAC GPA 78 D 276.00


DESCRIPTION:
SEAL, MECHANICAL CEFILAC GPA 108 D 270.00


DESCRIPTION:
SEAL, MECHANICAL CEFILAC GPA D 172.00 CCR 7R


MISC:
FOR 10X12DSH CANADA PUMP. COMPLETE SEAL STK #611601


MISC:
FOR 4X6DSH CANADA PUMP. COMPLETE SEAL STK #611605

DESCRIPTION:
KIT, SEAL REPAIR #38SMXS3-17N3VS3 2-3/8"


MISC:
FOR 10X12S CANADA PUMP. COMPLETE SEAL STK #611606

DESCRIPTION:
KIT, SEAL REPAIR #44SMSX2-17N3VS3 2-3/4"


MISC:
FOR 12X14S CANADA PUMP. COMPLETE SEAL STK #611609

DESCRIPTION:
KIT, SEAL REPAIR #62SMSX2-17N3VS3 3-7/8"


MISC:
FOR 3X4DS CANADA & GOULDS 3196 PUMP. COMPLETE SEAL STK #611610


MISC:
FOR 5500 B4 GOULDS PUMP. COMPLETE SEAL STK #611617

DESCRIPTION:
KIT, SEAL REPAIR #84FHDS3-S17N3XS3 5-1/4"


MISC:
FOR 5500 B3 GOULDS PUMP. COMPLETE SEAL STK #611619

DESCRIPTION:
KIT, SEAL REPAIR #66FHDS3-S17N3XS3 4-1/8"


MISC:
FOR 4x6 NI-HARD CANADA PUMP. COMPLETE SEAL STK #611620


MISC:
FOR 5500 B3 GOULDS PUMP. COMPLETE SEAL STK #611616


MISC:
NON-ASBESTOS MATERIAL. 463.55mm x 398.78mm x 1/8”  NA1122; GRLK37

DESCRIPTION:
GASKET, CASING COVER (CANADA PUMPS STANDARD P/N 65)


MISC:
GASO TRPLEX PLUNGER PUMP, 6GE-160118-332

DESCRIPTION:
SHIM SET, CONN. ROAD BRG. Z3220 GAS-100570-000.


MISC:
B3 POWER END; 60 HP RATED AND INCLUDES, BEARING HOUSING, SHAFT, BEARINGS, COVERS AND SEALS.


MISC:
B2 BEARING FRAME MECHANICAL SEAL OIL SEAL #416706


NOTES:
SAE 783, which is Aluminium - Tin - Copper Lead free material F820.


MISC:
1.75" I.D. X 0581 X 058H JOHN CRANE 5610QXO(58)H SILICON CARBIDE VS SILICONE CARBIDE WITH VITON O-RINGS


MISC:
BEARING SURFACE COATED WITH COLMONOY
BEARING SURFACE COATED WITH COLMONOY FUSED COATING

DESCRIPTION:
TAIL SHAFT, 3" DIA X 21" LNG 13" CLMNY BRG.


MISC:
SEE STOCK #610984 FOR REPAIR KIT COST $174.00 FROM CHINA. SEE DWG #8001057-J1 (12 SHEETS FOR ALL PARTS


DESCRIPTION:
SLEEVE, SHAFT - P/N G-6973 (CANADA PUMPS STANDARD P/N 8)


MISC:
S1XCR-60TC/SC/EP/316SS3, ONE PIECE SLEEVE, PRESSED IN FACES FOR 10X12S TO REPLACE 611307 SLRY DYNMICS


DESCRIPTION:
INTERMEDIATE SHAFT, LENGTH 103", DIAMETER 5-15/16". KEY WAYS AT BOTH ENDS, 1-1/2" X12"


DESCRIPTION:
IMPELLER, 20-1/4" DIA W/O BACK VANES - P/N E00127E012-1228


DESCRIPTION:
IMPELLER, 20-1/2" DIA W/O BACK VANES - P/N E00127E012-1228


MISC:
M.A.W.P. 1360 PSIG @ 200 DEGREE F, M.D.M.T 20 DEGREE F @ 1360 PSIG, CALCULATED VOLUME 736" CUBE


DESCRIPTION:
STABILIZER, SUCTION 25 GLN 110PSIG @ 200F


# Switchboard Items

Argument:
Find Count Likely duplicates for PartData


# TblCustomer

Address:
255 MacAlpine Cresent
Fort McMurray, Alberta T9H 4A5


Address:
P.O. Box 66203           UPS ACCT # 700264
Baton Rouge, Louisiana
70896, USA                           TAX ID # 721417059


Address:
Wabush, Labrador, Newfoundland
Wabush NL A0R 1BO


Address:
P.O. Box 1300
Philadelphia, PA
19105-1300


Address:
Mina El Mochilo, Las Vegas,
Santa Barbara, Honduras
RTN: 16279999471354


Address:
N. 1078B Quality Dr.,
Greenville, WI 54942
USA


Address:
10344 Main St.,                             TAX ID# 47-0856677
New Middletown, OH 44442       FEDEX#  90140948
USA


Address:
113 - 16 Fawcett Rd.,
Coquitlam B.C. V3K 6X9
Canada


Address:
14805-C East 500 Rd.,
Claremore, OK 74017


Address:
1373 Jeanne D'Arc Street
Hanmer, Ontario
P3P 0C1


Company:
Gas Services International (Aust) Pty Ltd.

Address:
1/33 Achievement Crescent
Acacia Ridge Qld 4110
Australia


Address:
Ontario Division
18 Rink Rd.,
Copper Cliff, On P0M 1N0


Address:
Gil Puyat Ave.,
Makati City, 
Philippines


Address:
5295 South 300 West Suite 300
Murray, UT 84107
USA


Address:
2850 WEST 139 ST
BLUE ISLAND, ILLINOIS, USA
60406


Address:
PO BOX 252
APPLECROSS 6953
WESTERN AUSTRALIA


Company:
Suministros, Soluciones y Servicios, S.C.


Address:
Lot 1 Dunsinane, Hatfield
Mandeville, Manchester
Jamaica W.I.


# TblQuotes

Notes:
TERMS: PRICES QUOTED ARE NET 30 DAYS, FOB WASHOUGAL WA. DELIVERY IS 5-6 WEEKS.  John Strome


Notes:
TERMS: PRICES QUOTED ARE NET 30 DAYS. DELIVERY IS 2-3  WEEKS. NOTE: PRICES WILL CHANGE ON NEXT ORDERS. FOR THIS QUOTE, PRICES ARE IN STOCK. THANKS JOHN


Notes:
Raul, prices quoted are FOB Edmonton. R009 Bearing & SP10116-1R10 Strainers in stock. Please allow 5 weeks standard delivery for Casing and Bearing Housing.  Thanks Ray


Notes:
Lynn, F8124S01 in stock, balance is 3-4 weeks standard delivery.   Thanks Ray


Notes:
TERMS: PRICES ARE NET 30 DAYS WITH APPROVED CREDIT. DELIVERY IS 3 WEEKS CIF CHILE SEAPORT.


Notes:
Rick, price quoted is FOB Houston. Please allow 4 weeks delivery for 510 Rubber, 10 days delivery for 520 Rubber, same price.   Thanks Ray


Notes:
TERMS: PRICES ARE NET 30 DAYS WITH APPROVED CREDIT. DELIVERY IS 8-9 WEEKS TO ALLOW TIME TO PRODUCE TOOLING ON FIRST ORDER. MATERIAL OF MANUFACTURE IS ASTM A532 28% CHRO-IRON.


Notes:
Lynn, prices quoted are FOB Houston. Please allow 2-3 weeks delivery.   Thanks Ray


Notes:
Jane, price quoted is FOB Houston, TX USA. Please allow 4-5 weeks delivery.    Regards Ray


Notes:
Mary, not able to supply Liner. Please allow 3-4 weeks delivery.  Regards Ray


Notes:
Terry, prices quoted are FOB Edmonton. Please allow 2-3 weeks delivery.  Thanks Ray


Notes:
Terry, prices quoted are FOB Edmonton. Please allow 2-3 weeks delivery.   Thanks Ray


Notes:
TERMS: PAYMENT AS AGREED. DELIVERY 2-3 WEEKS. MATERIAL QUOTED IS 28% Hi-Chrome 650 Brinell Hardness. Impeller is for Warman* 10/8 pump.


Notes:
TERMS: A minimum order of 5 pieces each item is required when placing your first order to off-set tooling charges. A deposit of 20% plus bank guarantees for the balance is required on this size of an order. We will require a wet-end sample of each pump for engineering which would take about a week in our facility. Delivery is 14-16 weeks on the first order. We would carry inventory of 2 each item. Note: Pricing is based on known parts we have made of similar configuration and size and is subject to change after evalutation of samples. Adjustments may be necessary up or down. MODIFIED GLAND CASE INCLUDES GLAND LINER & GLAND SIDE PLATE CAST AS 1 PIECE. MODIFIED SUC. CASE INCLUDES SUC. LINER & THROAT RING CAST AS 1 PIECE. Parts will interchange with existing mounts to bearing housing, stuffing box and piping. Thanks for your inquiry. John Strome, Sales Engineer.


Notes:
Mary, prices quoted are FOB Houston. Please allow 5-7 weeks standard delivery. 2 week delivery is avaialble.    Thanks Ray


Notes:
Anwar, prices quoted are FOB Edmonton. Please allow 3-4 weeks delivery.     Thanks Ray


Notes:
Jorge, prices quoted are FOB Houston. Please allow 4-5 weeks delivery for Ash Liners and 2-3 weeks for Warman parts.  Terms net 30 OAC less 2% net 15.              Regards Ray


Notes:
TERMS: Prices are net 30 days, Delivery is 2-8 weeks. Materials quoted are as follows; A05=28% Hi-Chrome, G01=Cast Iron, C21=420C SS 555Brinell Hardness, S42=Neoprene, R08=Natural Black Rubber 55 Durometer, D21=Ductile Iron, E21=4140 Steel GR5.


Notes:
TERMS: PAYMENT AS AGREED. DELIVERY IS 8-10 WEEKS CIF SINGAPORE. WE ARE QUOTING THE FOLLOWING MATERIAL SPECIFICATIONS; R08=NATURAL RUBBER 55 DURO, G01=CAST IRON, C21=420C SS 555BRINELL HARDNESS. ALL PARTS ARE CERTIFIED ISO-9001 AND HAVE BEEN FIELD TESTED FOR SEVERAL YEARS. PART NUMBERS USED ARE CURRENT. THANK YOU FOR YOUR CONFIDENCE IN OUR PRODUCTS AND SERVICES. JOHN R. STROME, SALES ENGINEER.


Notes:
Bud, prices quoted are FOB Edmonton. Please allow 2-3 weeks delivery.    Thanks Ray


Notes:
TERMS: PRICES ARE NET 30 DAYS. DELIVERY IS 3-4 WEELS FOR PARTS, 5-6 WEEKS FOR THE COMPLETE PUMP.


Notes:
Hello Jorge, prices quoted are FOB Houston. Please allow 5-7 weeks delivery.   Regards


Notes:
TERMS: PRICES ARE NET 30 DAYS. DELIVERY IS 3-4 WEEKS TO COMPLETE THE ORDER. THANKS FOR YOUR CONFIDENCE IN OUR PRODUCTS AND SERVICES. JOHN STROME


Notes:
Tami, prices quoted are FOB Houston. Please allow 2-3 weeks standard delivery.    Thanks Ray


Notes:
TERMS: PRICE IS NET 30 DAYS WITH APPROVED CREDIT. DELIVERY IS 4-5 WEEKS. THANK YOU FOR OUR ORDER, JOHN STROME.


Notes:
Jason, prices quoted are FOB Edmonton. Please allow 4-5 weeks delivery for Buna & SS.  520 N/R & Neoprene 2 Weeeks delivery.     Thanks Ray


Notes:
Peter, price quoted is FOB Oakville. Allow 10 weeks delivery for Alloy 20 (D20) and 3 weeks for CD4M.   Thanks Ray


Notes:
TERMS: PRICES ARE NET 30 DAYS WITH APPROVED CREDIT. DELIVERY IS 1 WEEK FOR ITEMS C6-138 & C1-106 WHILE STOCKS LAST. ITEM C1-105 IS 4 WEEKS. THANK YOU FOR YOUR INQUIRY AND CONFIDENCE IN OUR PRODUCTS AND SERVICES.


Notes:
Bruce, price quoted is FOB Edmonton. In stock   Thanks Ray


Notes:
Jill, prices quoted are FOB Edmonton. Please allow 4-5 weeks standard delivery.    Thanks Ray


Notes:
Lynn, would have to order 4-R009D-1 & 5-R009 bearings, 4-5 weeks delivery. Balance in stock.    Thanks Ray


Notes:
Jorge, prices quoted are FOB Edmonton. Please allow 5-6 weeks delivery. I have also quoted Impeller in A05 Hi-Chrome material in case of interest which is in stock.  Thanks Ray


Notes:
Rick, prices quoted are FOB Houston, please allow 8 weeks delivery.  Thanks Ray


Notes:
Tim, price quoted is FOB Houston, please allow 4-5 weeks standard delivery.   Thanks Ray


Notes:
Darren, price quoted is FOB Houston. Please allow 3-4 weeks delivery.   Thanks Ray


Notes:
David, price quoted is FOB Atlanta. Please allow 3-4 weeks delivery.  Thanks Ray


Notes:
Michael, prices quoted are FOB Houston. Please allow 6-8 weeks delivery.   Thanks Ray


Notes:
Jorge, prices quoted are FOB Houston. Please allow 4-5 weeks standard delivery.   Thanks Ray


Notes:
Jorge, prices quoted are FOB Edmonton. Please allow 4-5 weeks delivery.  Thanks Rayj


Notes:
David, prices quoted are FOB Houston. Please allow 5-6 weeks standard delivery.   Thanks


Notes:
Jill, prices quoted are FOB Houston, please allow 3-4 weeks delivery.   Thanks Ray


Notes:
George, price quoted is FOB Edmonton. Please allow 3-4 weeks delivery.   Thanks Ray


Notes:
Lynn, will have to order from Foundry. Please allow 4-5 weeks standard delivery.    Thanks Ray


Notes:
Lynn, seals in stock Edmonton. Strainer will have to be ordered, 2-3 weeks.   Thanks Ray


Notes:
Lindsay, prices quoted are FOB Houston. Please allow 6-8 weeks delivery on large quantity items. Not able to quote other items.     Thanks Ray


Notes:
Ted, price quoted is FOB Atlanta. Please allow 3-4 weeks delivery. Not able to quote other parts.   Thanks Ray


Notes:
Rod, prices quoted are FOB Edmonton. Impeller in stock, allow 4-5 weeks for balance.   Thanks Ray


Notes:
TERMS: PRICES QUOTED ARE IN US DOLLARS & FIRM FOR 1 YEAR, NET 30 DAYS. DELIVERY FOR FIRST ORDER IS 14-16 WEEKS, NEXT ORDERS STOCK EDMONTON.


Notes:
Anwar, prices quoted are FOB Houston. Please allow 3-4 weeks delivery.      Regards Ray


Notes:
TERMS: PRICES ARE NET 30 DAYS & FIRM FOR 1 YEAR. DELIVERY IS 6-8 WEEKS FOR ALL EXCEPT 10X17LP IMPELLER WHICH IS 12-14 WEEKS TO ALLOW FOR TOOLING PRODUCTION TIME. NOTE: OEM PRICES SHOWN ARE APPROXIMATE.


Notes:
Mary, price quoted is FOB Atlanta. Please allow 3 weeks delivery.    Thanks Ray


Notes:
TERMS: PRICES QUOTED ARE BASED ON MINIMUM QUANTITIES OF 5 EACH/ORDER. DISCOUNTS ARE AVAILABLE FOR HIGHER QUANTITIES. DELIVERY IS 2-4 WEEKS FOR RUBBER ITEMS, METAL MACHINED ITEMS 4-6, CAST CASINGS ARE 12-14 WEEKS. ALL PRICES ARE FOB EDMONTON!


Notes:
Anwar, price quoted is FOB Atlanta. Please allow 3-4 weeks delivery.   Thanks Ray


Notes:
Dave, price quoted is FOB Houston. Please allow 5-6 weeks delivery.   Thanks Ray


Notes:
Ray, prices quoted are FOB Houston, please allow 5-6 weeks delivery.   Thanks Ray


Notes:
TERMS: PRICES QUOTED ARE FOR 6/4 EAH PUMPS AND ARE NET 30 DAYS, FOB HOUSTON STOCK.


Notes:
TERMS: PRICES ARE NET 30 DAYS. DELIVERY IS 8-10 WEEKS FOR CAST ITEMS, 4-5 WEEKS FOR MACHINED ITEMS & 2-3 WEEKS FOR RUBBER ITEMS.


Notes:
TERMS: PRICES ARE NET 30 DAYS, FOB HOUSTON TX. DELIVERY IS STOCK.


Notes:
David, prices quoted are FOB Edmonton. Please allow 4-5 weeks standard delivery. 1 - F6147A05 Impeller in stock.   Thanks Ray


Notes:
TERMS: PRICES ARE NET 30 DAYS, 3-5 DAYS DELIVERY. FOB HOUSTON TX.


Notes:
David, prices quoted are FOB Edmonton. Impellers in stock.    Thanks Ray


Notes:
Anwar, price quoted is FOB Houston. Please allow 2 weeks delivery.  Thanks Ray


Notes:
Don, prices quoted are FOB Edmonton. C2017R26, C2127R08, C217S51 in stock. Please allow 3-4 weeks delivery on balance. Thanks Ray


Notes:
TERMS: PRICES QUOTED ARE NET 30 DAYS AND FIRM FOR 5 YEARS. DELIVERY IS STOCK HOUSTON TX.


Notes:
Stu, prices quoted are FOB Edmonton/Houston. C2110A05, E4147R38 in Edmonton stock. Balance is 5-6 weeks delivery.   Regards Ray


Notes:
Eric, prices quoted are FOB Edmonton. Impeller in stock, Insert 5-6 weeks standard delivery.  Thanks Ray


Notes:
Wendell, prices quoted are FOB Edmonton. Please allow 2-3 weeks delivery.   Thanks Ray


Notes:
Ross, pricing quoted is FOB Houston. Please allow 4-5 weeks delivery.      Regards Ray


Notes:
Shelby, please allow 2-3 weeks delivery. Prices quoted are FOB Houston.   Thanks Ray


Notes:
TERMS: PRICES QUOTED ARE NET 30 DAYS. DELIVERY 10-12 WEEKS FIRST ORDER ONLY. BALANCE OF ORDERS STOCK.


Notes:
Lynn, Q009 and D3125S01 in Edmonton stock. Balance 2 weeks delivery.    Thanks Ray


Notes:
TERMS: PRICES QUOTED ARE NET 30 DAYS US DOLLARS. DELIVERY IS STOCK EDMONTON. SEE WARRANTY AGREEMENT, TERMS & CONDITIONS.


Notes:
TERMS: PRICES QUOTED ARE NET 30 DAYS. DELIVERY IS 3-4 WEEKS FOR MACHINED PARTS & 12-14 WEEKS FOR CAST PARTS. NOTE: WE REQUIRE SAMPLE PARTS TO DRAW ITEMS #599997-09H & 572566-001


Notes:
JC, prices quoted are FOB Houston. Please allow 5-6 weeks delivery.   Thanks Ray


Notes:
John, prices quoted are FOB Houston. Please allow 5-6 weeks delivery.   Thanks Ray


Notes:
Lynn, price quoted is FOB Houston. Please allow 5-6 weeks delivery.    Thanks Ray


Notes:
Lynn, prices quoted are FOB Houston. Please allow 5-6 weeks standard delivery.    Thanks Ray


Notes:
Harold, standard delivery is 5-6 weeks. Items not quoted I will have get pricing from OEM.  Let me know.   Thanks Ray


Notes:
Raul, price quoted is FOB Houston. Please allow 4- 5 weeks delivery.     Thanks Ray


Notes:
Wendell. Price quoted is FOB Houston. Please allow 5-6 weeks delivery.    Thanks Ray


Notes:
David, prices quoted are FOB Houston. Please allow 5-6 weeks delivery.    Thanks Ray


Notes:
Craig, prices quoted are FOB Houston. Please allow 5-6 weeks delivery.   Thanks Ray


Notes:
Gary, E075C21 & E109S50 in stock Edmonton. F122S44 will be 10-12 days delivery.    Thanks Ray


Notes:
George, Liners are from OEM. Please allow 10-12 weeks delivery. Shaft will be 6-7 weeks delivery.    Thanks Ray


Notes:
Raul, prices quoted are FOB Houston. Please allow 6-7 weeks delivery.    Thanks Ray


Notes:
Lynn, please allow 4-5 weeks delivery FOB Atlanta.   Thanks Ray


Notes:
Mary, please allow 5-6 weeks delivery FOB Houston.   Thanks Ray


Notes:
Ray, prices quoted are FOB Houston. Please allow 6-7 weeks standard delivery.    Thanks Ray


Notes:
Wendell, prices quoted are FOB Houston. Not able to supply S42 Neoprene but have quoted in R26 Rubber which customer may except. E075C21, 2 - F6018R26, F6036R26, E111Q05 in stock. Balance would be 6-7 weeks standard delivery.   Thanks Ray


Notes:
TERMS: Prices quoted are net 30, less 2% net 10 days. All parts are stock Edmonton. Parts listed are the common wear parts, however, we will carry other items in stock.


Notes:
Lynn, Impellers and Bearing would be able to ship from Houston Thursday. O-rings and Gasket in stock Edmonton.  Thanks Ray


Notes:
Olga, prices quoted are FOB Houston. All parts in stock except for E4060S01 Joint Ring is stock Edmonton, Alberta Canada.   Regards  Ray


Notes:
Rod, prices quoted are FOB Houston. 6-7 weeks delivery.   Thanks Ray      Cannot supply strainer


Notes:
TERMS: PRICE IS NET 30 DAYS, DELIVERY IS 2 WEEKS.


Notes:
Mary, price quoted is FOB Houston. Please allow 4-5 weeks delivery.    Thanks Ray


Notes:
Anwar, prices quoted are FOB Houston, please allow 5-6 weeks delivery. No quote on the seal.   Thanks Ray


Notes:
Lynn, prices quoted are FOB Houston. Please allow 5-7 weeks standard delivery.   Thanks Ray


Notes:
John, prices quoted are FOB Houston. Parts in stock except D118C23 Ring which would be 2-3 weeks delivery.  Thanks Ray


Notes:
Ron, prices quoted are FOB Edmonton. Please allow 10-12 days to ship. Some parts in our Houston Warehouse and some will have to come from Foundry.  Thanks Ray


Notes:
Dave, prices quoted are FOB Edmonton. Please allow 5-6 weeks delivery.   Thanks Ray


Notes:
Dave, price quoted is FOB Edmonton. Please allow 5-6 weeks delivery.   Thanks Ray


Notes:
Lynn, Impeller in stock Edmonton, shim set will have to come from foundry. Can have into Houston 7-10 days.   Thanks Ray


Notes:
Lynn, Impeller and F075C21 Sleeve in stock Edmonton. Balance will have to come from Foundry 5-7 weeks.  Thank Ray


Notes:
Lynn, prices quoted FOB Houston. Please allow 5-7 weeks delivery.  Thanks Ray


Notes:
Debra, prices quoted are FOB Houston. Please allow 6-7 weeks delivery.   Thanks Ray


Notes:
TERMS: PRICES ARE NET 30 DAYS, STOCK HOUSTON TEXAS.


Notes:
Prices quoted are FOB Houston. Please allow 5-6 weeks delivery.     Thanks Ray


Notes:
Prices quoted are FOB Houston. Please alllow 5-6 weeks delivery.   Thanks Ray


Notes:
Prices quoted are FOB Houston. Please allow 5-6 weeks delivery.  Thanks Ray


Notes:
Prices quoted are FOB Houston. Please allow 6-8 weeks delivery.   Thanks Ray


Notes:
Prices quoted are FOB Houston.  Please allow 8-10 weeks delivery.  Thanks Ray


Notes:
Prices quoted are FOB Houston. Please allow 8-10 weeks delivery.    Thanks Ray


Notes:
Prices quoted are FOB Houston. Please allow 5-6 weeks delivery.   Thanks Ray


Notes:
Lynn, Bearing in Houston stock. Strainer is 2 weeks delivery into Houston.    Thanks Ray


Notes:
Rick, price quoted is FOB Houston in stock. Cannot supply the Expeller. Cannot supply Impeller in S42 material. Have quoted A05 Hi Chrome and R08 Rubber.   Thanks Ray


Notes:
David, prices quoted are FOB Houston. Please allow 6-7 weeks delivery. Not able to quote 504886.   Regards Ray


Notes:
Anwar, price quoted is FOB Houston. Please allow 5-6 weeks delivery. Not able to quote shaft.   Thanks Ray


Notes:
Dennis, price quoted is FOB Edmonton. Please allow 4-5 weeks delivery.   Thanks Ray


Notes:
Debra, price quoted is FOB Houston. Please allow 3-4 weeks delivery.    Thanks Ray


Notes:
Bruce, price quoted is FOB Houston. I will advise delivery after I check with Foundry. 4-5 weeks if in stock, 6-8 if has to be made.  Thanks Ray


Notes:
Mike, price quoted is FOB Houston. Please allow 2-3 weeks delivery. No quote on the Durco Impeller.  Thanks Ray


Notes:
Lynn, 3 in stock Houston. Balance 10-14 days. Thanks Ray


Notes:
Chris, prices quoted are FOB Edmonton. F8147A05 in stock Edmonton. Balance would be 5-7 weeks standard delivery.  Thanks Ray


Notes:
Efren, prices quoted are FOB Houston. Please allow 7-8 weeks delivery. Terms to be negotiated upon order.    Regards  Ray


Notes:
Rod, please have customer double check part numbers, he may have a metric pump in which case parts are different. Prices quoted are FOB Houston. Please allow 5-7 weeks standard delivery.     Thanks Ray


Notes:
Ray, price quoted is FOB Houston. Allow 6-7 weeks standard delivery.  Thanks Ray


Notes:
Bruce, price quoted is FOB Houston. Please allow 6-7 weeks delivery.   Thanks Ray


Notes:
Jill, prices quoted are FOB Houston. Please allow 6-7 weeks delivery.  Thanks Ray


Notes:
Tom, prices quoted are FOB Houston. Have quoted 520 N/R and Neoprene. Please allow 5-6 weeks delivery.   Thanks Ray


Notes:
Ron, prices quoted are FOB Edmonton. Please allow 6-7 weeks delivery.   Regards Ray


Notes:
Lynn, bearings in stock Houston.   Thanks Ray


Notes:
Dave, prices quoted are FOB Edmonton. Impeller, Shaft Sleeve and O-rings in stock Edmonton. Balance would be 6-7 weeks standard delivery.   Thanks Ray


Notes:
Rod, prices quoted are FOB Houston. Parts in stock.   Thanks Ray


Notes:
Lynn, seals in stock Edmonton. Impeller would be 5-6 weeks standard delivery.   Thanks Ray


Notes:
Wendi, price quoted is FOB Houston. Please allow 2 weeks delivery.       Thanks Ray


Notes:
Rod, prices quoted are FOB Edmonton. Casings and Impellers in stock. Balance would be 6-8 weeks delivery.   Thanks Ray


Notes:
Don, prices quoted are FOB Houston. Please allow 5-6 weeks delivery.    Thanks Ray


Notes:
Richard, prices quoted are FOB Edmonton. Please allow 5-6 weeks delivery. Parts have to be made. Shipping cost to Kapuskasing add $235.00.   Regards Ray


Notes:
Mike, prices quoted are FOB Houston. Please allow 6-8 weeks delivery.     Thanks Ray


Notes:
Richard, price quoted is FOB Edmonton stock.  Thanks Ray


Notes:
Raul, rice quoted is FOB Houston. Please allow 4-5 weeks delivery.     Thanks Ray


Notes:
Ray, prices quoted are FOB Houston. Please allow 6-7 weeks delivery.  Thanks Ray


Notes:
Mary, price quoted is FOB Edmonton. Please allow 4-5 weeks delivery.  Thanks Ray


Notes:
Mary, price quoted is FOB Houston. Please allow 4-5 weeks delivery.   Regards  Ray


Notes:
Ray, price quoted is FOB Edmonton. Please allow 8-10 weeks delivery.    Thanks Ray


Notes:
Debra, prices quoted are stock FOB Edmonton.   Thanks Ray


Notes:
NOTES: GARY, HERE IS THE PRICING FOR THE PARTS, NET 30 DAYS, LESS 2% 10 DAYS. WE WILL HOLD THE PRICING ON THE COMPLETE PUMP AT US$9,000.00. ON YOUR ORDER FOR THE PUMP CHANGE THE DESCRIPTION TO; 200ZJ-I-A60-A05 PUMP COMPLETE WITH CV ACCESSORIES. THANKS, JOHN STROME. TOTAL ORDER WITH PARTS IS US$18,393.60.


Notes:
Olga, all parts in Houston stock except E4060S01 in Edmonton stock.    Thanks Ray


Notes:
Mary, price quoted is FOB Houston. Please allow 2 weeks delivery.   Thanks Ray


Notes:
Mary, price quoted is FOB Houston. Please allow 3-4 weeks delivery.  Thanks Ray


Notes:
Roger, not able to supply the E118-IP50. Balance in stock Edmonton.      Thanks Ray


Notes:
Stu, prices quoted are FOB Seattle. E075C21 FOB stock in Houston. Balance 3-4 weeks.    Thanks Ray


Notes:
Bob, prices quoted are FOB Houston. Parts in stock.  Thanks Ray


Notes:
Jason, prices quoted are FOB Edmonton. Please allow 4-5 weeks delivery.  Thanks Ray


Notes:
Tom, price quoted is FOB Edmonton. In stock   Thanks Ray


Notes:
Hi Mary, prices quoted are FOB Houston. Please allow 3-4 weeks delivery.   Thanks Ray


Notes:
Ron, price quoted is FOB Seattle. Please allow 4-5 weeks standard delivery.     Thanks Ray


Notes:
TERMS: PRICES ARE NET 30 DAYS, LESS 2% NET 10. STOCK TO 6 WEEKS DELIVERY. JOHN STROME


Notes:
TERMS: PRICES QUOTED ARE NET 30 DAYS, LESS 2% NET 10 AND FIRM FOR A PERIOD OF 1 YEAR. DELIVERY IS STOCK TO 5 WEEKS. JOHN STROME


Notes:
Randy, prices quoted are FOB Vancouver, WA. Please allow 2-3 weeks delivery for C025 Shim & C111Q31 Packing. Balance would be 1-2 weeks delivery. Not able to quote the Joint Rings.   Thanks Ray


Notes:
TERMS: PRICES ARE NET 30 DAYS LESS 2% NET 10 AND FIRM FOR 1 YEAR. DELIVERY IS STOCK TO 5 WEEKS. JOHN STROME


Notes:
Note: Payment terms are cash advance at time of order. Delivery is 4-6 weeks FOB Houston Texas USA, and can be shipped by Courier. Thanks for your order.


Notes:
Note: Prices quoted are FOB Houston Texas. Allow 8 weeks for production and 3 weeks ocean freight to Jakarta. Estimated price for freight to Jakarta with insurance is US$1,200.00. Terms: A deposit of 25% is required at start of order. Balance net 30 days. Thanks for your request. John Strome


Notes:
Shelly, price quoted is FOB Houston. Please allow 3 weeks delivery.   Thanks Ray


Notes:
Randy, prices quoted are FOB Houston. Please allow 5-6 weeks delivery.   Thanks Ray


Notes:
Terms: Payment as agreed. Delivery is 12-15 weeks.


Notes:
Note: Hello Liu. Please fill in the prices on this purchase order and send back to us with you performa invoice. THIS IS A RUSH RUSH RUSH ORDER AND MUST SHIP LATEST TUESDAY JULY 5TH BY AIR TO IAECS LTD., 9830 - 42ND AVE., EDMONTON ALBERTA CANADA, POSTAL CODE T6E 5V5. Please work with Jim Li to ensure this order ships on time. These are old orders and customer is anxious for us to deliver. Thanks for effort, John!


Notes:
TERMS: PRICES QUOTED ARE FIRM FOR 90 DAYS, FOB VANCOUVER CANADA. DELIVERY IS STOCK TO 14 WEEKS. A DEPOSIT OF 50% IS REQUIRED ON ORDER. BALANCE IN NET 30 DAYS UPON APPROVED CREDIT. Thank you for your inquiry. JRS


Notes:
TERMS: A 50% DEPOSIT IS REQUIRED ON FIRST ORDER. BALANCE IS NET 30 DAYS WITH APPROVED CREDIT. DELIVERY IS 14-16 WEEKS ON FIRST ORDER TO ALLOW FOR PRODUCTION OF PATTERNS & TOOLING. SUBSEQUENT ORDERS ARE STOCK TO 8 WEEKS. NOTE: A MINIMUM QUANTITY FIRST ORDER OF 3 PCS ON EACH ITEM IS REQUIRED TO COVER THE COST OF PURCHASING OEM SAMPLE AND PRODUCING THE PATTERN TOOLING. AFTER ENGINEERING, OEM SAMPLE WILL BE SOLD TO YOU AT 20% BELOW OEM COST. YOU WILL BREAK EVEN ON THIS ITEM AND WE WILL LOOSE 20% ON THE SAMPLE.


Notes:
TERMS: PAYMENT ADVANCE BY T.T. or as Negotiated. Delivery is 8-10 weeks.  Thanks for your inquiry. Sorry, cannot quote the other listed items at this time. NOTE: All impellers listed are same item except for different material. Please advise John when ordering which material required. Thanks


Notes:
TERMS: A DEPOSIT OF 25% IS REQUIRED AT START OF ORDER, OR L.C. CONFIRMED. DELIVERY ON FIRST ORDER IS 12-14 WEEKS FOR TOOLING. NEXT ORDERS ARE STOCK TO 6 WEEKS.


Notes:
TERMS: PRICES ARE NET 30 DAYS, LESS 2% NET 10 DAY PAYMENT. DELIVERY IS 2 WEEKS. JRS


Notes:
TERMS: PRICES ARE NET 30 DAYS, LESS 2% NET 10 WITH APPROVED CREDIT. DELIVERY IS STOCK TO 5 WEEKS. NOTE: MATERIAL CHANGES ON PART #E02410-D21, E044C23, E062-10G61, E063P50, EAM073ME03,


Notes:
TERMS: ADVANCED FUNDS BY T.T. DELIVERY IS 4-6 WEEKS. ADVISE IMPELLER DIAMETERS WHEN ORDERING.


Notes:
TERMS: FIRST ORDER ADVANCE T.T., DELIVERY IS STOCK TO 8 WEEKS. THANK YOU FOR YOUR VALUED PURCHASE ORDER. JRS


Notes:
TERMS: NET 30 DAYS, LESS 2% NET 10. DELIVERY IS STOCK TO 1 WEEK. JRS


Notes:
TERMS: PRICES ARE NET 30 DAYS, LESS 2% NET 10. DELIVERY IS 8-10 WEEKS.


Notes:
TERMS: PRICES ARE NET 30 DAYS, LESS 2% NET 10. DELIVERY IS 6-8 WEEKS. THANK YOU FOR YOUR ORDER.


Notes:
TERMS: PRICES ARE NET 30 DAYS, LESS 2% NET 10. DELIVERY IS 6-8 WEEKS. THANK YOU FOR YOUR ORDER


Notes:
TERMS: PAYMENT BY L.C., MINIMUM OF 5 PIECES ON FIRST ORDER. DELIVERY IS 14 WEEKS PRODUCTION TIME. NEXT ORDERS DELIVERY IS STOCK TO 8 WEEKS PRODUCTION TIME. SIGNED: DR. JOHN R. STROME, PRESIDENT.


Notes:
TERMS: PRICES ARE NET 30 DAYS, LESS 2% NET 10. DELIVERY IS 5-6 WEEKS. THANKS, JOHN


Notes:
TERMS:  PRICES ARE  NET 30 DAYS, LESS 2% NET 10 DAYS.  ITEMS ARE STOCK TO 8 WEEKS. THANKS FOR YOUR ORDER.


Notes:
TERMS: ADVANCE T.T. AT TIME OF ORDER. DELIVERY IS 2-3 WEEKS. THANKS FOR YOUR VALUED PURCHASE ORDER. ALL ITEMS ARE ISO-9002 PRODUCED FROM CERTIFIED ASTM MATERIALS. ALL PARTS HAVE BEEN FIELD PROVEN AND INTERCHANEABLE WITH OEM.


Notes:
TERMS: PRICES QUOTED ARE NET, PAYABLE BY T.T. AT TIME OF SHIPMENT. DELIVERY IS 4-5 WEEKS. TERMS NEGOTIABLE!


Notes:
TERMS: PRICES ARE ADVANCE PAYMENT AT TIME OF ORDER. DELIVERY IS 8-10 WEEKS. Thanks for your inquiry, John.


Notes:
TERMS: PRICES ARE NET ADVANCE T.T. AT TIME OF ORDER, DELIVERY IS STOCK TO 6 WEEKS CANADA. THANKS FOR YOUR INQUIRY. JOHN


Notes:
TERMS: PRICES ARE IN US$, NET 30 DAYS, LESS 2% NET 10. DELIVERY IS STOCK TO 4 WEEKS. THANKS LAURIE, JOHN!


Notes:
TERMS: PRICES ARE NET, COD FIRST ORDER. DELIVERY IS 4-5 WEEKS. TERMS NEGOTIABLE WITH APPROVED CREDIT.


Notes:
TERMS: PRICES ARE NET 30 DAYS, LESS 2% NET 10 DAYS. DELIVERY IS STOCK TO 2 WEEKS. RECOMMENDED PARTS FOR 5 PUMPS IN SERVICE. JOHN.


Notes:
TERMS: PRICES ARE NET 30 DAYS, LESS 2% NET 10. DELIVERY IS 4-5 WEEKS. THANKS JIM. JOHN


Notes:
TERMS: PRICES ARE NET 30 DAYS, LESS 10% NET 10 WITH APPROVED CREDIT. DELIVERY IS STOCK TO 5 WEEKS.


Notes:
TERMS: PRICES ARE NET 30 DAYS WITH APPROVED CREDIT. DELIVERY IS STOCK. NOTE: BUTTONS AND GUIDES ARE NOT NEEDED WITH PEEK VALVE PLATES TO RUN NON-LUBE. STANDARD PLATES ARE 0.80" THICK. GUARDS ARE MACHINED FOR PROPER VALVE LIFT USING 0.80" THICK VALVE PLATES. JOHN STROME


Notes:
TERMS: DUE TO ENGINEERING & PATTERN TOOLING INVESTMENT COSTS, THE FIRST ORDER WILL REQUIRE A 50% DEPOSIT AT START. BALANCE IS NET 30 DAYS AFTER DELIVERY. DELIVERY TIME OF FIRST ORDER IS 18-20 WEEKS. FOB PORTLAND.


Notes:
TERMS: PRICES ARE NET 30 DAYS, LESS 2% NET 10 DAYS. DELIVERY IS 3-4 WEEKS. THANKS FOR YOUR INQUIRY. JOHN STROME


Notes:
TERMS: PRICES QUOTED ARE NET 30 DAYS, LESS 2% NET 10 DAYS. DELIVERY IS 8-10 WEEKS ARO. THANKS FOR YOUR INQUIRY. WILL ADVISE WHEN OTHER PARTS AVAILABLE. JOHN STROME.


Notes:
TERMS: PRICES QUOTED ARE ADVANCE PAYMENT BY WIRE TRANSFER. STOCK DELIVERY FROM HOUSTON. ESTIMATED SHIPPING COSTS BY TRUCK TO MIAMI IS APROXIMATELY US$200.00. John Strome


Notes:
TERMS: PRICES ARE NET 30 DAYS. STOCK DELIVERY AND WILL BE BALANCED BEFORE SHIPPING.


Notes:
TERMS: PRICES ARE NET 30 DAYS, LESS 2% NET 10. PARTS ARE STOCK ASIA, 4-5 DAYS BY AIR. TOTAL WEIGHT IS 2#. EXPEDITING CHARGE OF US$50.00 FOR AIR SHIPMENT TO EDMONTON. WILL SEND UPS YOUR ACCOUNT TO PARKER CO.


Notes:
TERMS: PRICES ARE NET 30 DAYS, LESS 2% NET 10. DELIVERY IS STOCK TO 6 WEEKS. THANKS FOR YOUR ORDER. JOHN STROME


Notes:
TERMS: PRICES ARE NET 30 DAY, LESS 2% NET 10 DAYS. DELIVERY IS 3-4 WEEKS. THANKS FOR YOUR ORDERJOHN STROME.


Notes:
TERMS: PRICES ARE NET 30 DAYS, LESS 2% NET 10. DELIVERY IS STOCK TO 2 WEEKS. SEE ATTACHED BILL OF MATERIAL FOR THE 3/2 CAH PUMP THAT USES ALL METAL HIGH CHROME WET-END. THANKS FOR RFQ, JOHN.


Notes:
TERMS: PRICES ARE NET 30 DAYS, LESS 2% NET 10 DAYS. DELIVERY IS 4-5 WEEKS ARO. BRUCE, IF ORDER FOR 2 IMPELLERS, DEDUCT OUR BILL AND PAY ONLY DIFFERENCE. THANKS JOHN.


Notes:
TERMS: PRICES ARE NET 30 DAYS, LESS 2% NET 10. DELIVERY IS 2-3 WEEKS ARO. THANKS FOR YOUR ORDER, BRENDA.


Notes:
TERMS: PRICES ARE NET 30 DAYS, LESS 2% NET 10 DAYS. DELIVERY IS 8-10 weeks.


Notes:
TERMS: PRICES ARE NET 30 DAYS, LESS 2% NET 10 DAYS. DELIVERY IS STOCK ASIA, 3-4 WEEKS BY SEA, 1 WK TO 10 DAYS BY AIR. I HAVE SHOWN YOU ALL PARTS FOR THESE PUMPS. MATERIAL TYPES, A05=28% CHROME, R08=NATURAL RUBBER, S01=EPDM, R26=LINER RUBBER. THANKS FOR YOUR ORDER, JOHN!


Notes:
NOTE: PRICES ARE IN USA DOLLARS, NET 30 DAYS, LESS 2% NET 10 DAYS. DELIVERY IS STOCK. THANK YOU FOR YOUR ORDER.


Notes:
NOTE: PRICES QUOTED ARE LIST LESS 15%. TERMS NET 30 DAYS, LESS 2% NET 10 DAYS. DELIVERY IS STOCK TO 4 WEEKS. THANKS FOR YOUR ORDER ROD. JOHN


Notes:
TERMS: PRICES ARE NET 30 DAYS, LESS 2% NET 10 DAYS. DELIVERY IS 8 WEEKS. JIM, I DO NOT HAVE AN ELASTOMER IMPELLER FOR THE 10/8, ONLY A05 MATERIAL. LET ME KNOW SOONEST, I HAVE A SHIPMENT COMING FOR THE F10147 AND CAN INCREASE THE ORDER. SAME PRICE FOR ONLY 1. THANKS, JOHN.


Notes:
TERMS: PRICES ARE NET 30 DAYS, LESS 2% NET 10 DAYS. DELIVERY IS 3-4 WEEKS. THANKS FOR YOUR ORDER. JOHN


Notes:
TERMS: PRICES ARE NET 30 DAYS, LESS 2% NET 10. DELIVERY IS 5-6 WEEKS. NOTE: WE WILL REQUIRE THE OLD IMPELLER TO USE THE METAL CORE. THANKS FOR YOUR ORDER, BRENDA PEDERSEN


Notes:
TERMS: PRICES ARE NET 30 DAYS, LESS 2% NET 10 DAYS. DELIVERY IS 6 WEEKS ARO. THANKS FOR YOUR ORDER, JOHN.


Notes:
A) approx. 20 lbs B) approx. 15 lbs. This impeller only comes in 5 vane. If it is 6 vane it is a special order and can only be obtained from the OEM.  Please allow 2-3 weeks  ARO            Terms: Net 30 days, less 2% net 10 days.  Thank You for the query. Brenda Pedersen


Notes:
TERMS:NET 30 DAYS/LESS 2% NET 10 DAYS ON APPROVAL OF CREDIT. DELIVERY IS 2- 3 WKS ARO. BASES COME NON-GROUTED. POLYMER COATED BASES OFFER SUPERIOR MOTOR  VIBRATION DAMPENING AND ARE RESISTANT TO TWISTING. THANK YOU FOR YOUR QUERY                                                         Brenda Pedersen              brenda@iaecs.com


Notes:
TERMS: PRICES ARE T.T. ADVANCE PAYMENT AT TIME OF ORDER. DELIVERY IS 2 WEEKS, CIF KUALA LUMPUR. THANKS FOR YOUR ORDER, JOHN STROME SALES ENGINEER


Notes:
TERMS: PRICES ARE T.T. ADVANCE PAYMENT AT TIME OF ORDER. DELIVERY IS APPROX. 4-6 WEEKS. THANK YOU FOR YOUR QUERY. Brenda Pedersen


Notes:
TERMS: PRICES ARE NET 30 DAYS, LESS 2% NET 10 DAYS. DELIVERY IS 1-2 WEEKS. THANKS FOR YOUR ORDER, JOHN STROME


Notes:
TERMS: PRICES ARE NET. ADVANCE T.T.  AT TIME OF ORDER FOR 80%, BALANCE NET 30 DAYS AFTER DATE OF RECEIVING SHIPMENT. DELIVERY IS 5-6 WEEKS FOR A05 METAL PARTS AND 8-10 WEEKS FOR A12 METAL PARTS. THANKS FOR YOUR ORDER ANDREAS, JOHN STROME.


Notes:
Terms: Net 30 days ,Net 10 days 2% Less, on approval of credit. All prices quoted are in US Funds. Delivery to Dock is approx. 4 -8 weeks ARO.  Your price is approx. 65% off our listed OEM prices. Thank You for your query and I look forward to working with you in the future. Brenda Pedersen


Notes:
Terms: 30days Net, 2% less 10 days Net. Delivery is approx. 4 - 6 weeks. Thank you for the query Lynn. Brenda


Notes:
TERMS: PRICES QUOTED ARE FIRM FOR 90 DAYS. PAYMENT BY T.T. ADVANCE AT TIME OF ORDER OR APPROVED L.C. DELIVERY IS STOCK TO 4 MONTHS. THANKS FOR YOUR ORDER, JOHN R. STROME


Notes:
TERMS: Prices Quoted Are Firm For 90 Days. PAYMENT By T.T. Advance At Time Of Order. Delivery 3-14 weeks.  Thank you for your query. Brenda Pedersen


Notes:
Terms: net 30 days. Delivery is 4-6 weeks. Thank you for your query. Brenda


Notes:
NOTE: PRICES ARE NET 30 DAYS, LESS 2% NET 10. DELIVERY IS STOCK TO 4 WEEKS. THANKS FOR YOUR ORDERS. JOHN


Notes:
Teresa, you net cost is 10% off IAECS List price.


Notes:
TERMS: PRICES QUOTED ARE NET 30 DAYS, LESS 2% NET 10. DELIVERY IS STOCK TO 8 WEEKS. THANKS FOR YOUR ORDER. JOHN STROME


Notes:
TERMS: PRICES QUOTED ARE NET 30 DAYS, LESS 2% NET 10. A TOOLING & PART PRODUCTION DEPOSIT OF 25% IS REQUIRED AT TIME OF FIRST ORDER. TIME TO PRODUCE PATTERNS IS 5 WEEKS. TIME TO SHIP FIRST ORDER IS 12 WEEKS. NOTE: IAECS WILL CARRY INVENTORY IN HOUSTON TO SUPPORT YOUR USAGE REQUIREMENT AS INDICATED. WE WILL CARRY A 2 MONTH AVERAGE INVENTORY. THANK YOU FOR THE OPPORTUNITY TO DISCUSS OUR QUOTATION AND TERMS. JOHN R. STROME


Notes:
TERMS: PRICES ARE NET 30 DAYS, LESS 2% NET 10. DELIVERY IS 3-4 WEEKS. PARTS CAN BE 1 WEEK DELIVERY BY AIR FREIGHT. AIR COST IS APPROXIMATELY $5.00/LB. THANKS FOR YOUR ORDER, JOHN.


Notes:
TERMS: PRICES QUOTED ARE NET 30 DAYS, LESS 2% NET 10 DAYS, WITH APPROVED CREDIT. DELIVERY IS 8-10 WEEKS, FOB EDMONTON.


Notes:
TERMS: PRICES ARE NET 30 DAYS, LESS 2% NET 10 DAYS WITH APPROVED CREDIT. DELIVERY IS STOCK TO 3 WEEKS. NOTE: LAST 2 ITEMS ON YOUR INQUIRY ARE NOT USED IN THIS SMALL PUMP. THANKS FOR THE OPPORTUNITY, JOHN.


Notes:
TERMS: PRICE QUOTED IS NET 30 DAYS, LESS 2% NET 10 DAYS. DELIVERY IS 8-10 DAYS IF ORDERED TODAY. WHEN PLACING YOUR ORDER, PLEASE ADVISE CREDIT INFO AND YOUR UPS ACCOUNT # SO WE CAN SHIP TO YOU IN THE USA. THANKS JRS


Notes:
TERMS: PRICES QUOTED ARE YOUR LIST,  LESS 15% = NET. DELIVERY IS 5-6 WEEKS. THANKS FOR YOUR ORDER.


Notes:
TERMS: PRICES QUOTED ARE NET 30 DAYS, LESS 2% NET 10 DAYS. YOUR NET IS LESS 15% OF PRICES SHOWN. DELIVERY IS 3-4 WEEKS. THANKS FOR YOUR ORDER. JOHN


Notes:
TERMS: 50% DEPOSIT AT TIME OF ORDER. BALANCE TO BE DISCUSSED. DELIVERY IS STOCK TO 10 WEEKS.


Notes:
TERMS: PRICES QUOTED ARE NET 30 DAYS WITH ACCOUNT APPROVAL. DELIVERY IS 8-10 WEEKS. NOTE: WE DO NOT OFFER THE IMPELLER OR EXPELLERS IN THIS MATERIAL. MATERIAL QUOTED IS NEOPRENE. JRS


Notes:
TERMS: 50% DEPOSIT AT TIME OF ORDER, BALANCE T.T. AT TIME OF SHIPMENT. DELIVERY 8-10 WEEKS.


Notes:
TERMS: PRICES ARE NET 30 DAYS, LESS 2% NET 10. DELIVERY IS 3-4 WEEKS.


Notes:
TERMS: PRICES ARE NET 30 DAYS, LESS 2% NET 10 DAYS. DELIVERY IS 3-4 WEEKS. THANK YOU FOR YOUR VALUED BUSINESS. John


Notes:
TERMS: PRICES ARE LIST LESS 30%, LESS 2% NET 10 DAYS. DELIVERY IS 3-4 WEEKS. NOTE: 39698 COVER IS OEM ONLY. THANKS FOR YOUR ORDER. JOHN


Notes:
Delivery is 8 weeks - FOB Edmonton.  I have quoted A05 material for the 10/8 pump items as we only manufacture the elastomer items up to the 8/6 pump. Thank you for your quote request. If you have any questions I will be glad to help. Thanks, Brenda Pedersen


Notes:
TERMS: PRICES ARE NET 30, LESS 2% NET 10 DAYS. DELIVERY IS STOCK TO 10 WEEKS. NOTE: PART NUMBERS 19229 AVAILABLE IN NEOPRENE ONLY. ITEMS NOT QUOTED ARE DUE TO NO TOOLING. NOTICE MATERIAL CHANGES ON SOME WARMAN* ITEMS. REGARDS, JOHN.


Notes:
TERMS: PRICES ARE NET 30 DAYS. DELIVERY IS STOCK TO 5 WEEKS. THANKS FOR YOUR ORDER.


Notes:
TERMS: PRICES ARE NET 30 DAYS. DELIVERY IS 12-14 WEEKS. NOTE: WILL REQUIRE SAMPLES ON FIRST ORDERS TO MAKE DRAWINGS EXCEPT FOR 14X12 CASINGS. PLEASE ADVISE USAGE ON RUBBER PARTS. WE MAY BE ABLE TO PRODUCE TOOLING IF VOLUME SUPPORTS IT. THANK, JOHN.


Notes:
TERMS: PRICES ARE NET 30 DAYS. DELIIVERY IS STOCK TO 10 DAYS. NOTE: NOT AVAILABLE IN R08, S01 IS EPDM. JOHN


Notes:
TERMS: PRICES ARE NET 30 DAYS, LESS 2% NET 10 DAYS. DELIVERY IS 12-14 WEEKS.


Notes:
TERMS: PRICES QUOTED REQUIRE A 50% DEPOSIT WITH ORDER. BALANCE NET 30 DAYS. DELIVERY IS STOCK TO 6 WEEKS.


Notes:
TERMS ARE 2%NET 10, NET 30 DAYS,  PLEASE ALLOW 4 - 6 WEEKS FOR DELIVERY    THANK YOU FOR CONSIDERING US


Notes:
Terms are 2%net 10, or net 30 days with approved credit.  Please allow 10 - 12 weeks for delivery.Thank you


Notes:
TERMS: PRICES ARE 50% ADVANCE AT TIME OF ORDER. BALANCE NET 30 DAYS. DELIVERY IS 8-10 WEEKS. IAECS-MEXICO NET PRICE IS LESS 20%. JRS


Notes:
TERMS: NET 30 DAYS, LESS 2% NET 10 DAYS. DELIVERY IS 4-6 WEEKS. JRS


Notes:
FYI  The R33 parts you have requested a quote for are only available in A05 Material in our company.Terms are 2%net 10,net 30 days  Delivery is 6-8 weeks  Thank You


Notes:
TERMS: WE REQUIRE 50% WITH ORDER. BALANCE NET 30 DAYS. DELIVERY IS 12-14 WEEKS FIRST ORDER. AFTER FIRST ORDER, STOCK EDMONTON.


Notes:
TERMS: PRICES ARE NET 30. WILL REQUIRE A 50% DEPOSIT WITH ORDER. DELIVERY IS 6-8 WEEKS. JRS


Notes:
TERMS: ADVANCE DEPOSIT BY T.T. AT TIME OF ORDER. DELIVERY TIME IS STOCK TO 2 WEEKS. Thank you for your oder. JRS


Notes:
TERMS: PRICES ARE NET 30 DAYS, LESS 2% NET 10. DELIVERY IS 4-6 WEEKS.


Notes:
TERMS: PRICES ARE NET 30 DAYS, LESS 2% NET 10 DAYS. DELIVERY IS 6-8 WEEKS. NOTE:YOUR NET COST IS LESS 10%  OF UNIT PRICE. JRS


Notes:
TERMS: PRICES QUOTED REQUIRE 50% DEPOSIT BY T.T. WITH ORDER. BALANCE IS NET 30 DAYS WITH APPROVED CREDIT. DELIVERY IS 6-7 WEEKS.


Notes:
TERMS: PRICES ARE NET 30 DAYS. DELIVERY IS 5 WEEKS. JRS


Notes:
TERMS: PRICES ARE NET 30 DAYS LESS 2% NET 10 DAYS WITH APPROVED CREDIT. FIRST ORDER REQUIRES A 50% DEPOSIT. DELIVERY IS STOCK TO 4 WEEKS.


Notes:
TERMS: NET 30 DAYS, DELIVERY IS 4-6 WEEKS.


Notes:
TERMS: NET 30 DAYS, LESS 2% NET 10. DELIVERY IS 3-4 WEEKS.


Notes:
Terms are 2%net, 10 days, net 30 Delivery is 4 - 6 weeks from entry date     PLEASE NOTE  There is a material code change on the end covers  Thank you!  Bonnie


Notes:
TERMS: PRICES ARE NET 30 DAYS. DELIVERY 4-6 WEEKS. NOTE: WE DO NOT HAVE DRAWINGS ON THE REMAINING ITEMS. JRS


Notes:
TERMS 50%DEPOSIT, 50% DUE ON DELIVERY  , ALLOW 4 - 6 WEEKS DELIVERY THANK YOU


Notes:
TERMS: Please be advised that a 50% deposit is required at the time of the order, and the remaining balance is due at the time of shipment.  Delivery time is 4 - 6 weeks.  Thank you in advance for your business, and we look forward to hearing from you soon.  Mattie


Notes:
TERMS:  NET 30 DAYS.  PLEASE ALLOW 4 - 6 WEEKS FOR DELIVERY.  IT'S A PLEASURE WORKING WITH YOU, AND WE LOOK FORWARD TO YOUR ORDER.  THANK YOU.   MATTIE


Notes:
TERMS ARE NET 30 DAYS,  DELIVERY IS 8 - 10 WEEKS                 10 % discount


Notes:
50 % deposit required with order,  balance due on delivery,2%discount net 10 days.  Delivery is 6 weeks.                     Thank you for your interest in our company


Notes:
Terms are due on delivery, Delivery is 4 - 6 weeks  weight as requested is 53lb.s                                                                        Thank you for your inquiry!


Notes:
TERMS ARE 50% WITH THE ORDER AND THE REMAINING 50% DUE UPON DELIVERY DELIVERY IS 3 - 4 WEEKS AS THESE ARE NON STOCK ITEMS


Notes:
Advance Payment Required.  Delivery is 6-8 weeks.  Thank you very much for your inquiry.


Notes:
TERMS: PRICES QUOTED ARE NET 30 DAYS. DELIVERY IS 4 WEEKS FROM DATE OF ORDER. PRICE INCLUDES MOUNTING ACCESSORIES, LESS PULLEYS.


Notes:
Terms are 50 % deposit with order, 50% on delivery date for new customers.  Please allow 6-8 weeks for delivery.


Notes:
Terms are 2%net 10 days, net 30  Delivery is 2 weeks       Thank  you!


Notes:
Terms:  Prices quoted are firm, advance payment by wire transfer is required.  Delivery is 10  weeks.  Thank you for your inquiry


Notes:
Advance payment on delivery.  Once you have established a credit rating with our company, alternate terms will be made available.  Thank you for your inquiry!  Delivery is 6-8 weeks.


Notes:
Please allow 2 - 4 weeks for delivery.  Thank you for your order, and have a wonderful day.  Mattie


Notes:
TERMS: PRICES ARE IN USA DOLLARS, A DEPOSIT ON ORDER OF 40% IS REQUIRED, BALANCE BY T.T. AT TIME OF SHIPMENT. DELIVERY IS 14 WEEKS. NOTE: WE CAN QUOTE COMPLETE PUMPS, BUT WILL BE WITH MORRIS WET END PARTS AND IAECS DESIGN POWER (BEARING ASSEMBLY) END. SOME OF OUR PART NUMBERS FOR YOUR PUMP  ARE DIFFERENT. WILL FLY TO CUSTOMER JOB SITE TO VARIFY PARTS BEFORE PROCEEDING IF SAMPLES CAN BE MADE AVAILABLE. JRS


Notes:
Terms are Advance payment before delivery is made.  Delivery is 6-8 weeks.  Thank you for your inquiry.  Once you have established credit with our company alternate terms will be available.


Notes:
Terms are advance payment on delivery date.  Delivery is 6-8 weeks.  Thank you for your inquiry.  Once you have established credit with our company alternate terms will be made available.


Notes:
TERMS:  A DEPOSIT OF 25% IS REQUIRED AT START OF ORDER, OR, L.C. CONFIRMED.  DELIVERY ON FIRST ORDER IS 12 - 14 WEEKS FOR TOOLING.  NEXT ORDERS ARE STOCK TO 8 WEEKS.  IMPORTANT:  PLEASE NOTE THAT THIS QUOTE PROVIDED FOR YOUR PERUSAL IS ON THE APPROVAL OF JOHN R. STROME, PRESIDENT/IAECS.     THANK YOU AND HAVE A WONDERFUL DAY.  MATTIE


Notes:
terms are net 30, 2%net 10.  Delivery is 4-6 weeks.  Thank you for your inquiry!


Notes:
TERMS: PRICE IS NET 30, LESS 10% NET 10 DAYS. STOCK DELIVERY FROM WASHOUGAL. Thank you for your inquiry.


Notes:
TERMS: PRICES ARE NET 30 DAYS, LESS 15% DISCOUNT. DELIVERY IS 4-6 WEEKS. NOTE: CORRECT PART NUMBER FOR THE SHAFT IS CAM073 AND NOT C072. THANKS, MATTIE


Notes:
Terms are advance payment with order.  Delivery is 6-8 weeks.  Once you have established credit with our company other terms will be made available.  Thank you for your inquiry.


Notes:
TERMS: PRICES ARE NET 30 DAYS WITH APPROVED CREDIT. DELIVERY IS 2-3 WEEKS. THANKS FOR YOUR ORDER


Notes:
TERMS: Price quoted is FOB Zip Code 49849 USA. Delivery is 8-10 weeks to complete. First half of order in 6-8 weeks. An advance payment of 50% is required at time of order by Wire Transfer. Balance due at time of delivery. Note: Our drawing #1624C02 is according to drawing submitted.


Notes:
TERMS: PRICES QUOTED ARE NET 30 DAYS, LESS 2% NET 10 DAYS. DELIVERY IS STOCK TO 8 WEEKS.  THANKS FOR YOUR ORDERS, JOHN.


Notes:
TERMS: PRICES QUOTED ARE US DOLLARS,  NET 30. DELIVERY IS 10 WEEKS. THANKS FOR YOUR ORDERS. JOHN


Notes:
TERMS: PRICES ARE NET 30 DAYS, DELIVERY IS STOCK TO 3 WEEKS. NOTE: WE ONLY HAVE THE LANTERN RESTRICTOR IN P50 PLASTIC MATERIAL. THANKS FOR YOUR ORDERS. JOHN


Notes:
TERMS: PRICES QUOTED REQUIRE A 50% DEPOSIT. BALANCE NET 30 DAYS, LESS 2% IF PAID IN 10 DAYS.  DELIVERY IS 8-10 WEEKS. THANKS FOR YOUR ORDER. JOHN


Notes:
TERMS: PRICES QUOTED ARE NET 30 DAYS, DELIVERY IS 5-6 WEEKS. NOTE: UNABLE TO SUPPLY GALIGHER IMPELLER IN HYPALON. THANKS FOR YOUR ORDER. JOHN


Notes:
TERMS: PRICES ARE NET 30 DAYS. DELIVERY IS 3-4 WEEKS. NOTE: MUST FLY SHIPMENT TO GET THIS DELIVERY TIME. ESTIMATED COST IS $750.00.


Notes:
TERMS: NET 30 DAYS. DELIVERY IS 12-14 WEEKS. COULD BE SHORTENED AT TIME OF ORDER. THANKS, JOHN.


Notes:
TERMS: YOUR NET FOR PRICES QUOTED IS LESS 10%. A 50% ADVANCE PAYMENT IS REQUIRED AT TIME OF ORDER. DELIVERY IS 6-8 WEEKS.


Notes:
TERMS:TO CALCULATE YOUR NET, DEDUCT 10% FROM  UNIT PRICE QUOTED. A 50% DEPOSIT IS REQUIRED WITH YOUR ORDER. DELIVERY IS 6-8 WEEKS.


Notes:
TERMS: PRICES QUOTED ARE NET 30 DAYS. DELIVERY IS STOCK TO 5 WEEKS. THANKS FOR YOUR ORDER. JOHN


Notes:
TERMS: PRICES ARE NET 30 DAYS WITH APPROVED CREDIT, LESS 2% NET 10 DAYS. YOUR NET COST IS UNIT PRICE LESS 15%. STANDARD DELIVERY IS 6-8 WEEKS. WE CAN SHIP BY AIR IN 3 WEEKS BUT AIR FREIGHT WOULD BE EXTRA AT COST. THANKS FOR YOUR ORDER, JOHN.


Notes:
TERMS: PRICES QUOTED REQUIRE A 50% DEPOSIT AT TIME OF ORDER, BALANCE AT TIME OF SHIPMENT BY T.T. DELIVERY IS 5-6 WEEKS.  NOTE: PUMP IS TOTALLY INTERCHANGEABLE  WITH WARMAN* JOHN


Notes:
TERMS: PRICES ARE NET 30 DAYS, LESS 2% NET 10 DAYS WITH APPROVED CREDIT. DELIVERY IS 2-3 WEEKS. THANKS FOR YOUR ORDER. JOHN STROME


Notes:
TERMS: Price quoted is FOB Zip Code 49849 USA, NET 30 DAYS, LESS 2% NET 10. Delivery is 8-10 weeks to complete. Our drawing #1624C02 is according to drawing submitted.


Notes:
TERMS: PRICES QUOTED ARE NET 30 WITH APPROVED CREDIT. A DEPOSIT OF 50% IS REQUIRED AT TIME OF ORDER. NOTE: WE DO NOT OFFER HS (HIGH SEAL) PARTS, BUT DO HAVE STANDARD PARTS FOR THESE PUMPS. ALSO, WE DO NOT OFFER RUBBER PARTS FOR PUMPS LARGER THAN 8/6. THANKS FOR YOUR ORDER.


Notes:
TERMS: PRICES ARE NET 30 DAYS, LESS 2% NET 10. DELIVERY IS STOCK TO 2 WEEKS. THANKS FOR YOUR ORDER DARREN, JOHN. NOTE: PRICES ON YOUR ORDER LAST QUOTED IN 2003. INCREASE IS 10%.


Notes:
TERMS: PRICES ARE NET 30 DAYS, LESS 2% NET 10. DELIVERY IS STOCK TO 5 WEEKS. THANKS FOR YOUR ORDER.


Notes:
TERMS: PRICES ARE NET 30 DAYS, LESS 2% NET 10 DAYS. A DEPOSIT OF 50% IS REQUIRED WITH THIS ORDER. DELIVERY IS STOCK TO 7 WEEKS. THANKS FOR YOUR ORDER, JOHN.


Notes:
TERMS: PRICES QUOTED ARE FIRM FOR 1 YEAR. AN ADVANCE DEPOSIT BY WIRE TRANSFER OF 50% IS REQUIRED AT TIME OF ORDER. BALANCE OF PAYMENT NET 30 DAYS WITH APPROVED CREDIT. DELIVERY IS 8-10 WEEKS. THANKS FORYOUR ORDER, JOHN STROME.


Notes:
TERMS: PRICES QUOTED REQUIRE A 50% DEPOSIT AT TIME OF ORDER, BALANCE NET 30 DAYS WITH APPROVED CREDIT. DELIVERY IS 6-8 WEEKS. NOTE: ADD 15% FOR ALLOY HCIA51


Notes:
TERMS: PRICES REQUIRE PAYMENT AT TIME OF SHIPMENT. DELIVERY IS 6-8 WEEKS. NOTE: SOME OF THE PRICES MAY BE A LITTLE HIGH BECAUSE WE HAVE TO BUY SAMPLES FROM WARMAN FIRST TIME AROUND. THANKS GRAHAM.


Notes:
TERMS: PRICES REQUIRE A 50% DEPOSIT AT TIME OF ORDER, BALANCE NET 30 DAYS WITH APPROVED CREDIT. DELIVERY IS 6-8 WEEKS. THANKS FOR YOUR ORDER. JOHN STROME


Notes:
TERMS: PRICES REQUIRE A 50% DEPOSIT AT TIME OF ORDER. DELIVERY IS 12-14 WEEKS. SORRY, DO NOT HAVE THE OTHER PARTS. JOHN


Notes:
TERMS: PRICES ARE NET 30 DAYS. DELIVERY IS 6-8 WEEKS. THANKS FOR YOUR ORDER. JOHN


Notes:
TERMS: PRICE QUOTED REQUIRES A 50% DEPOSIT AT TIME OF ORDER, BALANCE NET 30 DAYS WITH APPROVED CREDIT. DELIVERY IS 10-12 WEEKS.


Notes:
TERMS: NET 30 DAYS, LESS 2% NET 10. DELIVERY IS 2-3 WEEKS. THANKS FOR YOUR ORDER. JOHN


Notes:
TERMS: PRICES QUOTED REQUIRE A 50% DEPOSIT AT START OF ORDER. DELIVERY IS 6-8 WEEKS. THANKS FOR YOUR ORDER, JOHN


Notes:
TERMS: PRICES QUOTED REQUIRE A 50% DEPOSIT, BALANCE NET 30 DAYS WITH APPROVED CREDIT. DELIVERY IS 4-6 WEEKS. NOTE: THESE PUMPS DO NOT USE OPEN IMPELLERS. SIZES 6X6 & 5X5 PUMPS HAVE OPEN IMPELLERS. THANKS FOR YOUR ORDER, JOHN.


Notes:
TERMS: PRICES REQUIRE 50% DEPOSIT WITH ORDER, BALANCE NET 30 DAYS, LESS 2% NET 10. DELIVERY IS 4-5 WEEKS. THANKS FOR YOUR ORDER, JOHN.


Notes:
TERMS: PRICES QUOTED ARE NET 30 DAYS, DELIVERY IS STOCK TO 4 WEEKS.  THANKS FOR YOUR ORDER. JOHN


Notes:
TERMS: PRICES ARE NET 30 DAYS, LESS 2% NET 10 DAYS. DELIVERY IS 4-5 STANDARD, AIR 10 DAYS AT COST. NOTE: WE DO NOT SUPPLY THE EXPELLER IN URETHANE, ONLY METALS.


Notes:
TERMS: PRICES QUOTED REQUIRE A 50% DEPOSIT, BALANCE NET 30 DAYS WITH APPROVED CREDIT. DELIVERY IS 8-10 WEEKS. THANKS FOR YOUR ORDER.


Notes:
TERMS: PRICES QUOTED ARE NET 30 DAYS, LESS 2% NET 10. DELIVERY IS 3 WEEKS. THANKS FOR YOUR ORDER.


Notes:
TERMS: PRICES ARE NET 30 DAYS, LESS 2% NET 10. DELIVERY IS 4 WEEKS. THANKS FOR YOUR ORDER.


Notes:
TERMS: PRICES QUOTED WILL REQUIRE A 50% DEPOSIT, BALANCE NET 30 DAYS WITH APPROVED CREDIT. DELIVERY IS STOCK TO 10 WEEKS.


Notes:
TERMS: PRICES QUOTED REQUIRE A 50% DEPOSIT, BALANCE IS NET 30 DAYS WITH APPROVED CREDIT. DELIVERY IS 12-14 WEEKS.


Notes:
TERMS: PRICES REQUIRE A DEPOSIT OF 50% AT TIME OF ORDER, BALANCE NET 30 DAYS WITH APPROVED CREDIT. DELIVERY IS 10-12 WEEKS. JOHN


Notes:
TERMS: A DEPOSIT OF 25% IS REQUIRED AT TIME OF ORDER BY WIRE TRANSFER, BALANCE NET 30 DAYS WITH APPROVED CREDIT. DELIVERY IS 4-5 WEEKS TO COMPLETE. THANKS FOR YOUR ORDER, JOHN.


Notes:
TERMS: PRICES REQUIRE WIRE TRANSFER AT TIME OF SHIPMENT. DELIVERY IS 6-8 WEEKS. SORRY, CANNOT IDENTIFY THE OTHER ITEMS REQUESTED BY PART NUMBER GIVEN. JOHN


Notes:
TERMS: PRICES REQUIRE A 50% DEPOSIT BY T.T. AT TIME OF ORDER. BALANCE AT TIME OF SHIPMENT. DELIVERY IS 8-10 WEEKS FROM RECIEPT OF PAYMENT. NOTE: YOUR NET COST IS LESS 25% OF UNIT PRICE.


Notes:
TERMS: ADVISE WHEN SHIPPED TO BACIS ON THEIR PURCHASE ORDER TO IAECS  CANADA. WILL REPLACE AT VALUE STATED. NOTE: GUILLERMO, YOU ARE TO SET THE SELLING PRICE TO BACIS. THE DIFFERENCE IN OUR PRICE TO MEXICO IS YOUR COMMISSION. PS: PLEASE ADVISE IF PRICES ARE OK. THANKS, JOHN.


Notes:
TERMS: PRICES ARE NET 30 DAYS. DELIVERY IS 3-4 WEEKS.


Notes:
TERMS: PRICES ARE NET 30 DAYS. DELIVERY IS 4 WEEKS FOR C21 SLEEVE AND 8 WEEKS FOR J04 SLEEVE.


Notes:
TERMS: NET 30 DAYS, LESS 2% NET 10. DELIVERY 4-6 WEEKS


Notes:
TERMS: PRICES REQUIRE T.T. AT TIME OF SHIPMENT. DELIVERY IS 4 WEEKS, CIF MALAYSIA


Notes:
TERMS: NET 30 DAYS. DELIVERY: STOCK EDMONTON


Notes:
TERMS: Prices are net 30 days, Delivery is 3-6 weeks


Notes:
TERMS: PRICES REQUIRE 50% DEPOSIT. DELIVERY IS STOCK TO 8 WEEKS.


Notes:
TERMS: PRICES ARE NET 30 DAYS. DELIVERY IS STOCK TO 8 WEEKS MAXIMUM. RAUL, PLEASE CONSIDER INVENTORY IN MEXICO. THANKS, JOHN


Notes:
TERMS: PRICES REQUIRE A 50% DEPOSIT AT TIME OF ORDER. DELIVERY IS STOCK TO 8 WEEKS. THANKS FOR YOUR ORDER, JOHN


Notes:
TERMS: PRICES REQUIRE A 50% DEPOSIT, BALANCE AT TIME OF SHIPMENT BY T.T. TRANSFER. DELIVERY IS 10-12 WEEKS. THANKS FOR YOUR ORDER TONY. IF PRICES NEED TO BE ADJUSTED A LITTLE, PLEASE ADVISE. JOHN


Notes:
TERMS: PRICES REQUIRE A 50% DEPOSIT ON ORDER. DELIVERY IS 25-30 DAYS FOR PRODUCTION, 3-4 WEEKS FOR SHIPMENT TO ARRIVE BLAIRMORE CANADA.


Notes:
TERMS: NET 30 DAYS, LESS 2% NET 10 DAYS. DELIVERY IS 4-6 WEEKS.


Notes:
TERMS: PRICES REQUIRE ADVANCE PAYMENT AT TIME OF SHIPMENT. DELIVERY IS STOCK TO 4 WEEKS.


Notes:
TERMS: PRICES REQUIRE PAYMENT AT TIME OF SHIPMENT. DELIVERY IS 4 WEEKS. THANKS FOR YOUR ORDER.


Notes:
TERMS:  PRICES REQUIRE ADVANCE PAYMENT AT TIME OF SHIPMENT BY T.T.  DELIVERY IS STOCK TO 8 WEEKS TO COMPLETE.  YOUR NET PRICE IS 25% LESS THAN UNIT PRICE.  THANK YOU FOR YOUR ORDER, KIM.


Notes:
TERMS: PRICE QUOTED IS NET 30 DAYS.  DELIVERY 6 - 7 WEEKS.  THANK YOU FOR YOUR INTEREST IN IAECS, KIM YACHIMETZ


Notes:
TERMS: PRICE QUOTED IS NET 30 DAYS.  DELIVERY 6-7 WEEKS.  THANK YOU FOR YOUR INTEREST IN IAECS, KIM YACHIMETZ


Notes:
TERMS: PRICES QUOTED ARE NET 30 DAYS WITH APPROVED CREDIT. DELIVERY IS 8-10 WEEKS. NOTE: WILL STOCK 1 IMPELLER FOR YOU. THANKS FOR YOUR ORDER, JOHN.


Notes:
TERMS: PRICES QUOTED ARE NET 30 DAYS WITH APPROVED CREDIT. DELIVERY IS STOCK TO 4 WEEKS. THANKS FOR YOUR ORDER, JOHN STROME


Notes:
TERMS:  NET 30 DAYS, DELIVERY 5-6 WEEKS, THANK YOU FOR YOUR INTEREST IN IAECS, KIM YACHIMETZ


Notes:
TERMS: PRICES ARE NET 30 DAYS, LESS 2% NET 10 DAYS. YOUR NET COST IS UNIT PRICE LESS 10%. STANDARD DELIVERY IS 6-8 WEEKS. THANKS FOR YOUR ORDER, KIM


Notes:
TERMS:  COD UNTIL CREDIT ESTABLISHED, DELIVERY 20 WEEKS FOR IMPELLER.


Notes:
TERMS:  PRICES ARE NET 30 DAYS, LESS 2% NET 10 DAYS.  DELIVERY IS STOCK, 3-4 WEEKS, THANK YOU, KIM


Notes:
TERMS:  NET 30 DAYS, STOCK TO 4 WEEKS, THANK YOU FOR YOUR INQUIRY, KIM


Notes:
TERMS:  PRICES ARE NET 30 DAYS, LESS 2% NET 10 DAYS.   PRICES QUOTED IN CAD DOLLARS, THANK YOU, KIM


Notes:
TERMS:  COD UNTIL CREDIT ESTABLISHED, DELIVERY STOCK TO 6 WEEKS., THANK YOU FOR YOUR INQUIRY, KIM


Notes:
TERMS:  NET 30 DAYS, DELIVERY STOCK TO 3- 6 WEEKS, THANK YOU FOR YOUR INQUIRY, KIM


Notes:
TERMS: PRICES ARE NET 30 DAYS, LESS 2% NET 10 DAYS. DELIVERY IS 3-6 WEEKS. THANK YOU FOR YOUR INQUIRY, KIM


Notes:
TERMS: PRICES QUOTED ARE NET 30, LESS 2% NET 10 DAYS. Delivery is stock to 4 weeks.  Thank you for your inquiry, Kim Yachimetz


Notes:
TERMS:  NET 30 DAYS, STOCK TO 3-4 WEEKS, THX KIM Y


Notes:
TERMS:  NET 30 DAYS, STOCK TO 5 WEEKS DELIVERY, THX, KIM YACHIMETZ


Notes:
TERMS:  NET 30 DAYS, DELIVERY STOCK TO 4 WEEKS, THX KIM YACHIMETZ


Notes:
TERMS: PRICES ARE NET 30 DAYS, LESS 2% NET 10 DAYS. A DEPOSIT OF 50% IS REQUIRED WITH THIS ORDER. DELIVERY IS STOCK TO 7 WEEKS. THANKS FOR YOUR ORDER, KIM YACHIMETZ


Notes:
TERMS:  ITEMS QUOTED ARE 5-13 WEEK DELIVERY.  DELIVERY WILL BE CONFIRMED AT THE TIME OF ORDER.  FINANCIAL TERMS ARE 50% AT TIME OF ORDER, BALANCE NET 30 DAYS, LESS 2% NET 15 DAYS.  REGARDS,  KIM


Notes:
50% ADVANCED DEPOSIT, BALANCE ON DELIVERY


Notes:
TERMS: PRICES ARE NET 30 DAYS, LESS 2% NET 10. DELIVERY IS 4-6 WEEKS. NOTE: WE HAVE QUOTED E66 INSTEAD OF E65 WHICH IS A BETTER MATERIAL. THANKS FOR YOUR ORDER, JOHN.


Notes:
TERMS:  NET 30 DAYS, STOCK TO 6 WEEKS, THANK YOU FOR YOUR INQUIRY, KIM


Notes:
TERMS: PRICES QUOTED REQUIRE 50% DEPOSIT. DELIVERY IS 7-10 DAYS. THANKS FOR YOUR ORDER, JOHN STROME.


Notes:
TERMS: PRICE QUOTED IS NET 30 DAYS.  DELIVERY 4-5 WEEKS.  THANK YOU FOR YOUR ORDER, KIM YACHIMETZ


Notes:
TERMS: PRICES ARE NET 30 DAYS, LESS 2% NET 10 DAYS. DELIVERY IS 5-6 WEEKS. THANKS FOR YOUR ORDER. KIM YACHIMETZ


Notes:
TERMS: PRICES ARE NET 30 DAYS.  DELIVERY IS 8-10 WEEKS. THANKS FOR YOUR INQUIRY, KIM YACHIMETZ


Notes:
TERMS: PRICES QUOTED REQUIRE A 50% DEPOSIT, BALANCE IS NET 30.  DELIVERY IS 8-10 WEEKS. THANKYOU FOR YOUR INQUIRY, KIM YACHIMETZ


Notes:
TERMS: PRICES QUOTED ARE NET 30 DAYS, LESS 2% NET 10 DAYS. DELIVERY IS 8-10 WEEKS FOB PORTLAND. THANKS FOR YOUR INQUIRY, KIM YACHIMETZ


Notes:
TERMS: PRICES REQUIRE A 50% DEPOSIT AT TIME OF ORDER, BALANCE NET 30 DAYS. DELIVERY IS 12-13 weeks maximum.


Notes:
TERMS: PRICES ARE NET 30 DAYS, LESS 2% NET 10 DAYS. DELIVERY IS 8-10 WEEKS. THANKS FOR YOUR ORDER. JOHN


Notes:
TERMS: PRICES REQUIRE 50% DEPOSIT. DELIVERY IS STOCK TO 8 WEEKS.   PLEASE NOTE ERIKA:  WE CANNOT OFFER YOU A QUOTE ON THE WARMAN ASH MCH-450, THANK YOU FOR YOUR INQUIRY, KIM YACHIMETZ


Notes:
TERMS:  NET 30 DAYS, STOCK TO 8 WEEKS, THANK YOU FOR YOUR ORDER, JOHN


Notes:
TERMS: PRICES REQUIRE 50% DEPOSIT. DELIVERY IS STOCK TO 6 WEEKS.  THANK YOU FOR YOUR INQUIRY, JOHN STROME


Notes:
TERMS:  PRICE QUOTED IS NET 30 DAYS, DELIVERY 4-5 WEEKS, THANK YOU FOR YOUR INQUIRY, KIM YACHIMETZ


Notes:
TERMS:  50% DEPOSIT REQUIRED WITH ORDER. BALANCE NET 30 DAYS WITH APPROVED CREDIT.  DELIVERY IS STOCK TO 6-8 WEEKS. THANKS FOR YOUR INQUIRY, KIM YACHIMETZ


Notes:
TERMS:  STOCK FROM 1 DAY - 4 WEEKS.  FINANCIAL TERMS ARE 50% AT TIME OF ORDER, BALANCE NET 30 DAYS, LESS 2% NET 15 DAYS.  THANK YOU FOR YOUR INQUIRY RANDY!  REGARDS,  KIM YACHIMETZ


Notes:
TERMS:  NEGOTIABLE LETTER OF CREDIT WITH PROGRESSION DRAWS.  DELIVERY: 16-20 WEEKS, ARO.  THANK YOU FOR YOUR INQUIRY, KIM YACHIMETZ


Notes:
TERMS:  FOB PORTLAND, NET 30 DAYS, DELIVERY STOCK TO 3-4 WEEKS, THANK YOU FOR YOUR ORDER, KIM


Notes:
TERMS: PRICES QUOTED REQUIRE A 50% DEPOSIT, BALANCE IS NET 30.  DELIVERY IS 6-8 WEEKS. THANK YOU FOR YOUR INQUIRY, KIM YACHIMETZ


Notes:
TERMS:  DELIVRY STOCK TO 4-6 WEEKS, NET 30 DAYS, THANK YOU FOR YOUR INQUIRY, KIM YACHIMETZ


Notes:
TERMS:  DELIVERY STOCK TO 4-6 WEEKS, ORDER COD UNTIL CREDIT ESTABLISHED, THANK YOU FOR YOUR INQUIRY, KIM YACHIMETZ


Notes:
TERMS:  DELIVERY STOCK TO 4 WEEKS, NET 30 DAYS, THANK YOU FOR YOUR INQUIRY, KIM YACHIMETZ


Notes:
TERMS:  DELIVERY TO STOCK 6-7 WEEKS, 50% DEPOSIT AT TIME OR ORDER, NET 30 ON BALANCE, THANK YOU FOR YOUR ORDER, KIM YACHIMETZ


Notes:
ERMS: PRICES REQUIRE 50% DEPOSIT, BALANCE NET 30 DAYS.. DELIVERY IS STOCK TO 8 WEEKS, FOB PORTLAND.  THANK YOU FOR YOUR INQUIRY, KIM YACHIMETZ


Notes:
TERMS:  BALANCE DUE NET 30.   WE HAVE 2 SETS IN STOCK IN EDMONTON TO BE SHIPPED IMMEDIATELY.  DELIVERY ON REMAINING 3 SETS UP TO 5 WEEKS.  THANK YOU FOR YOUR ORDER RANDY, REGARDS, KIM YACHIMETZ


Notes:
TERMS: PRICES QUOTED REQUIRE 50% DOWN, BALANCE NET 30 DAYS. DELIVERY IS 8-10 WEEKS FROM DATE OF ORDER.  THANK YOU, KIM YACHIMETZ


Notes:
TERMS: PRICES QUOTED ARE 50% DOWN, NET 30 DAYS.   DELIVERY IS 6-8 WEEKS. THANK YOU FOR YOUR INQUIRY, KIM YACHIMETZ


Notes:
TERMS:  PAYMENT NET 30 DAYS, FOB PORTLAND TO YOUR DOOR VIA AIR SHIPMENT.  REGARDS,  KIM YACHIMETZ


Notes:
TERMS:  50% DEPOSIT DUE AT TIME OF ORDER, NET 30 ON BALANCE.  DELIVERY STOCK TO 8 WEEKS.  PLEASE REFER TO TYSA FILE 013-05-IL, IAECS PO 51254


Notes:
TERMS:  NET 30 DAYS, DELIVERY REQUIRED BY CUSTOMER BEFORE DEC 7, 2006.  ORDER TO BE SHIPPED FROM CHINA VIA AIR PER JOHN'S CONVERSATION WITH JEFF, THANK YOU KIM


Notes:
General terms: 50% deposit at time of order. Balance at time of shipping by T.T. Estimated shipping date:   12-14 weeks. Terms are Negotiable.Items #1 and #2 are Manufactured as Matched sets and must be ordered together. I would like to thank you for the opprotunity to quote this order to you. Please contact me if you have any inquiries about this quote.        Price are all USD.  Best Regards…Rick Botha


Notes:
TERM:BALANCE DUE NET 30  6 TO 8WEEKS DELIVERY. ITEM # 2 IS ABOUT 2 WEEK DELIVERY  ITEM #4,5 ARE IN STOCK. CAN SHIP WITHIN THE WEEK.  THANK YOU FOR ALLOWING US TO QUOTE. …RICK


Notes:
TERMS: PRICES QUOTED ARE STOCK EDMONTON. PAYMENT DUE NET 30 DAYS, LESS 2% NET 10 DAYS. THANKS FOR YOUR ORDER DEAN. JOHN


Notes:
TERMS: NET 30 DAYS 50% DUE AT TIME OF ORDER. 5 TO 6 WEEKS DELIVERY. FOB Portland Oregon.


Notes:
TERMS ARE NET 30 DAYS. I AM PRESENTLY OUT OF STOCK BUT AM EXPECTING STOCK INTO WAREHOUSE IN ABOUT 3-4 WEEKS.WE CAN SHIP BY COURIER FROM FACTORY WICH WOULD  GET DELIVERED TO YOU IN ABOUT 2 WEEKS. THANK YOU FOR THE OPPORTUNITY TO QUOTE,BEST REGARDS…RICK


Notes:
TERMS: PRICES QUOTED REQUIRE 50% DEPOSIT AT TIME OF ORDER. DELIVERY IS 8 WEEKS. NOTE: NEGOTIABLE FOR INVENTORY PURCHASE. THANKS JOHN


Notes:
TERMS: PRICES ARE NET 30 DAYS. DELIVERY IS 4 WEEKS FOB PORTLAND ORIGON. THANKS FOR YOUR INQUIRY.


Notes:
TERMS: PRICES ARE NET 30 DAYS. DELIVERY IS STOCK EDMONTON. NOTE: NEW CAST IMPELLERS WILL BE HIGHER IN PRICE. WILL ADVISE SOONEST. THANKS FOR YOUR ORDER, JOHN


Notes:
TERMS: PRICES QUOTED ARE NET 30 DAYS. DELIVERY IS FIRM TRUE OF 8 WEEKS MAXIMUM. NOTE: WE HAVE 5 OF EACH IN STOCK IN PORTLAND. MATERIAL IS A05 IMPELLER AND THE REST ARE R26. R26 IS A LITTLE SOFTER THAN THE R33, SEE MATERIAL SHEETS. JOHN


Notes:
TERMS: PRICES ARE NET 30 DAYS, STOCK EDMONTON. MINOR PARTS NOT QUOTED. NOTE: A05 MATERIAL IS ASTMA532 28% HIGH CHROME 650 BRINELL.


Notes:
TERMS: PRICES SHOWN ARE NET 30 DAYS, THANKS FOR YOUR BUSINESS, JOHN STROME.


Notes:
TERMS: PRICES ARE NET 30 DAYS, STOCK OUR WAREHOUSE IN PORTLAND USA. THANKS FOR YOUR BUSINESS, JOHN STROME


Notes:
TERMS: NET 30 DAYS F.O.B. PORTLAND STOCK.


Notes:
FOB EDMONTON Ab 6-8 WEEKS DELIVERY STANDARD SHIPPING 4-5 WEEKS AIR RUSH. I GAVE YOU AN EXTRA 10% OFF ON E044C23. THANK YOU FOR THE OPPROTUNITY TO QUOTE…RICK


Notes:
TERMS: PRICES ARE NET 30 DAYS, DELIVERY IS 8-10 WEEKS. FOB EDMONTON ALBERTA. NOTE: HAVE 4 CASING RINGS IN STOCK.


Notes:
OUR STANDARD TERMS AND CONDITIONS APPLY 50% DEPOSIT AT TIME OF ORDER BALANCE NET 30 AFTER DELIVERY. DELIVERY WOULD BE 6-8 WEEKS FROM TIME OF ORDER WITH THE EXCEPTIONS OF ANY ITEMS IN STOCK . THEN DELIVERY WOULD 1 - 2 WEEKS. THANK YOU FOR THE OPPORTUNITY TO QUOTE.


Notes:
OUR STANDARD TERMS AND CONDITIONS APPLY 50% DEPOSIT AT TIME OF ORDER BALANCE NET 30 AFTER DELIVERY. DELIVERY WOULD BE 6-8 WEEKS FROM TIME OF ORDER WITH THE   EXCEPTIONS OF ANY ITEMS IN STOCK . THEN DELIVERY WOULD 1 - 2 WEEKS. THANK YOU FOR THE OPPORTUNITY TO QUOTE.


Notes:
TERMS: PRICES QUOTED REQUIRE A 50% DEPOSIT AT TIME OF ORDER. BALANCE AT TIME OF SHIPMENT. DELIVERY IS STOCK TO 4 WEEKS. IMPELLERS ARE ASTMA532 28% HIGH CHROME IRON, 650 BRINELL HARDNESS. THANKS FOR YOUR ORDER.


Notes:
TERMS: PRICES REQUIRE A 50% DEPOSIT BY WIRE TRANSFER, BALANCE IS NET 30 DAYS, DELIVERY IS STOCK TO 6 WEEKS


Notes:
TERMS: PRICES REQUIRE A 50% DEPOSIT AT TIME OF ORDER. BALANCE NET 30 DAYS. DELIVERY IS STOCK TO 12 WEEKS. THANKS FOR YOUR ORDER, CHRIS LACROIX


Notes:
TERMS: PRICES ARE NET 30 DAYS, DELIVERY IS 4-6 WEEKS.


Notes:
TERMS: PRICES QUOTED REQUIRE A 50% DEPOSIT AT TIME OF ORDER, 30% AT TIME OF SHIPMENT, 20% NET 30 DAYS. DELIVERY IS STOCK TO 4 WEEKS. NOTE: R33 MATERIAL PARTS MUST BE PURCHASED IN SETS. DISCOUNTS ARE AVAILABLE ON QUANTITIES OF 3 OR MORE OF EACH ITEM. THANKS FOR YOUR ORDER. JOHN


Notes:
TERMS: PRICES QUOTED REQUIRE A 50% DEPOSIT AT TIME OF ORDER. A 30% PAYMENT IS DUE AT TIME OF SHIPMENT. BALANCE IS NET 60 DAYS. DELIVERY IS STOCK TO 14 WEEKS. NOTE: IF ALL ITEMS ARE ORDERED, DEDUCT 20%. CONTACT THE FACTORY FOR QUANTITY DISCOUNTS ON ITEM ORDER QUANTITIES OF MORE THAN 3.  THANKS FOR YOUR ORDER.


Notes:
TERMS: PRICES QUOTED ARE NET 30 DAYS, CIF VANCOUVER.  YOUR NET PRICE ON THIS ORDER ONLY IS LESS 15% OF UNIT PRICE. DELIVERY IS 1 WEEKS FOR 2 IMPELLERS, BALANCE 3-4 WEEKS. THANKS FOR YOUR ORDER. JOHN


Notes:
TERMS: PRICES QUOTED REQUIRE A 50% DEPOSIT AT START OF ORDER, BALANCE NET 30 DAYS WITH APPROVED CREDIT. DELIVERY IS 14-16 WEEKS FIRST ORDER. NEXT ORDERS 8 WEEKS.


Notes:
PRICES ARE RATED FOR STOCKING DISTRIBUTOR. OUR STANDARD TERMS AND CONDITIONS APPLY, 50% DEPOSIT AT TIME OF ORDER BALANCE NET 30 AFTER DELIVERY. DELIVERY WOULD BE 8-10 WEEKS FROM TIME OF ORDER WITH THE   EXCEPTIONS OF ANY ITEMS IN STOCK . WILL STOCK POPULAR ITEMS AFTER FIRST ORDERAND YOUR USAGE ADVISE. THEN DELIVERY WOULD BE 1 - 2 WEEKS. NOTE: S0013UE62 ADJUSTING BOLT NG PART?-NO QUOTE ON THIS ITEM. THANK YOU FOR THE OPPORTUNITY TO QUOTE.


Notes:
TERMS: PRICES QUOTED REQUIRE A 50% DEPOSIT AT TIME OF ORDER, BALANCE IS NET 30 DAYS. DELIVERY ON FIRST ORDER IS 14-16 WEEKS TO ALLOW TIME TO PRODUCE TOOLING. NEXT ORDERS ARE STOCK TO 4 WEEKS. NOTE: MATERIAL IS 90 DURO HARDNESS URETHANE. THANKS FOR YOUR ORDER.


Notes:
OUR STANDARD TERMS AND CONDITIONS APPLY, 50% DEPOSIT AT TIME OF ORDER BALANCE NET 30 AFTER DELIVERY. DELIVERY 8-10 WEEKS ARO. 3 UPPER STRAINERS REQD.                                    R10=NAT RUBBER    S44= NEOPRENE 80 DUROMETER                     SOCKET PARTS COOME AS SET OF 6= "QTY1"


Notes:
NET 30 DAYS    DEL 2-3 WEEKS ARO       UPS ACCT.: 1331XW


Notes:
R009-STOCK EDM, R009D-1, 8-10 WEEKS. THESE ARE INNER AND OUTER BEARINGS FOR THE 100RVSPW PUMP.  NET 30 DAYS


Notes:
50% ARO, 50% NET 30 DAYS. DELIVERY 10-12 WEEKS ARO.


Notes:
TERMS 50% WITH ORDER, NET 30 DAYS ON BALANCE OAC.                                                                                                        25% APPROX STOCK ALABAMA. BALANCE 5-7 WEEKS FROM OUR OFFSHORE WAREHOUSES.


Notes:
TERMS: PRICES REQUIRE 50% DEPOSIT, BALANCE NET 30 DAYS. DELIVERY: STOCK TO 4 WEEKS. NOTE: THESE ARE ADDITIONAL SPARES THAT ARE REQUIRED TO SUPPORT THE 4 SIZE 8/6 PUMPS THAT WILL BE IN OPERATION. THANKS FOR YOUR ORDER, JOHN.


Notes:
TERMS 50% WITH ORDER. BALANCE 30 DAYS ARO.DEL 7-9 WEEKS ARO.   OUR PART NOS FOR THE SRL-C 12 X 10 ARE SAME AS METSO. WE HAVE NO DATABASE ON YOUR NUMBERS


Notes:
TERMS: PRICES ARE NET 30 DAYS, FOB ALABAMA. DELIVERY IS STOCK TO 4 WEEKS.


Notes:
TERMS: PRICES ARE  NET 30 DAYS. DELIVERY IS STOCK* TO 6 WEEKS FOR ALL ITEMS EXCEPT URETHANE PARTS. *ITEMS MARKED * ARE RECOMMENDED SPARES AND STOCK PORTLAND. THANKS FOR YOUR ORDERS, JOHN.


Notes:
TERMS: PRICES REQUIRE A 50% DEPOSIT AT START OF ORDER, BALANCE AT TIME OF SHIPMENT. THESE PRICES ARE BASED ON HIGH SHIPPING COSTS FOR 1 ONLY EACH. IF YOU CAN INCREASE QUANTITIES ON ORDER, WE CAN DISCUSS DISCOUNTS. DELIVERY IS 10-12 WEEKS MAX. THANKS FOR ORDER, JOHN.


Notes:
TERMS: PRICES ARE NET 30 DAYS. DELIVERY IS STOCK* TO 6 WEEKS FOR ALL ITEMS EXCEPT URETHANE PARTS. *ITEMS MARKED * ARE RECOMMENDED SPARES AND STOCK PORTLAND. THANKS FOR YOUR ORDERS, JOHN.


Notes:
TERMS: PRICE QUOTED IN US DOLLARS AND REQUIRES A 50% DEPOSIT AT START OF ORDER. BALANCE IS NET 30 DAYS. DELIVERY OF SHAFT IS 4-6 WEEKS. DELIVERY OF BEARING HOUSING IS 16-18 WEEKS AFTER SAMPLE PROVIDED TO MAKE DRAWING. THANKS FOR YOUR ORDER.


Notes:
TERMS: PRICE QUOTED IN US DOLLARS AND REQUIRES A 50% DEPOSIT AT START OF ORDER. BALANCE IS NET 30 DAYS. DELIVERY OF CASING IS 5-7 WEEKS.THANKS FOR YOUR ORDER.


Notes:
TERMS NEGOTIABLE, DELIVERY 10-12 WEEKS ARO


Notes:
50% ON ORDER, BALANCE NET 30 DAYS. DEL-USUALLY 2-3 WEEKS, TO BE CONFIRMED.


Notes:
TERMS NEGOTIABLE. WE HAVE CHOSEN CLOSEST WARMAN PART #S TO YOUR SUPPLIED PNs. DIMENSIONS AND MATERIALS TO BE CONFIRMED. DEL. 8-10 WEEKS ARO. WE ARE NO QUOTING ITEMS 1 AND 5 ON YOUR LIST, CANNOT FIND THESE NUMBERS IN ENGINEERING DATA.


Notes:
TERMS 50% ARO, BALANCE NET 30 DAYS. DELIVERY 6-8 WEEKS ARO, SUBJECT TO CONFIRMATION AT TIME OF ORDER.


Notes:
TERMS: PRICES QUOTED REQUIRE A 50% DEPOSIT AT TIME OF ORDER. A 30% PAYMENT IS DUE AT TIME OF SHIPMENT. BALANCE IS NET 60 DAYS. DELIVERY IS STOCK TO 14 WEEKS.  NOTE: YOUR NET PRICE IS LESS 5% OF TOTAL PRICE. WE HAVE ALSO PAID THE FREIGHT TO LAREDO TEXAS. THANKS FOR YOUR ORDER. JOHN STROME


Notes:
DEL 4-6 WEEKS ARO. TERMS 50% WITH ORDER, NET 30 DAYS ON BALANCE.


Notes:
TERMS 50% DEPOSIT WITH ORDER, DEL 4-6 WEEKS ARO. 4/3 BARESHAFT PUMPS EQUIPPED WITH HIGH CAPACITY BEARING ASSEMBLIES, HIGH CHROME IMPELLERS AND NATURAL RUBBER LINERS. PUMPS SUPPLIED LESS MOTORS: EQUIPPED WITH BASEPLATES, COMPANION FLANGES, BELTS AND BELT GUARDS, AND SHEAVES.


Notes:
TERMS AS DISCUSSED. E4036MR33.. 4 IN STOCK. E4145REIA05…9-12 WEEKS DEL, REGULAR IMP FASTER DEL.         F6083R26…STOCK, REDUCED EYE=9-1 WEEKS.                           F6145RE1A05…….9-12 WEEKS, FASTER WITH REG IMPELLER.  E4018MR26… STOCK,  E4036MR26….STOCK,  E4083MR26…E4147A05 STOCK, DAM028A05,DAM029A05…4-6 WEEKS….C2017MR26..STOCK, D023ME62…STOCK, C2147A05,C028A05,C029A05…….1EA IN STOCK,…………………….STOCK ITMES SUBJECT TO PRIOR SALE, ALL OTHER ITEMS 4-6 WEEKS, OR AS NOTED ABOVE.


Notes:
TERMS: PRICES REQUIRE A 50% DEPOSIT, 30% AT TIME OF SHIPMENT, BALANCE NET 30 DAYS. DELIVERY IS 8-10 WEEKS FROM DATE OF ORDER. NOTE: ACCESSORIES INCLUDES; BELTS, PULLEYS, GUARD, MOTOR & PUMP BASE AND COMPANION FLANGES. THANKS FOR YOUR ORDER.


Notes:
OUR STANDARD TERMS AND CONDITIONS APPLY. 50 % DEPOSIT AT TIME OF ORDER, NET 30 AFTER DEL. DEL 7-9 WEEKS ARO.


Notes:
2 EA IN STOCK OF ALL ITEMS.                                                                 OUR STANDARD TERMS AND CONDITIONS APPLY. 50 % DEPOSIT AT TIME OF ORDER, NET 30 AFTER DEL.


Notes:
TERMS: A MINIMUM FIRT TIME ORDER OF 5 PIECES PER ITEM MUST BE ORDERED. 50% ADVANCE PAYMENT IS REQUIRED. DELIVERY IS 8-10 WEEKS FOR FIRST ORDER. THANKS FOR YOUR INQUIRY. JOHN STROME


Notes:
OUR STANDARD TERMS AND CONDITIONS APPLY. 50 % DEPOSIT AT TIME OF ORDER, NET 30 AFTER DEL. NORMAL DEL 6-8 WEEKS.  SOME PARTS ARE STOCK ALABAMA, SEE EMAIL.


Notes:
OUR STANDARD TERMS AND CONDITIONS APPLY. 50 % DEPOSIT AT TIME OF ORDER, NET 30 AFTER DEL. DEL TIME ON LINERS TO ADVISE. OTHER PARTS 7-9 WEEKS ARO. ESTIMATE DEL ON LINERS 11-15 WEEKS, TO BE CONFIRMED.


Notes:
TERMS: PRICES ARE IN US DOLLARS AND REQUIRE 30% DEPOSIT AT TIME OF ORDER. BALANCE DUE AT TIME OF SHIPMENT. DELIVERY IS 110 DAYS. Thanks for your business Ron.


Notes:
TERMS: NET 30 DAYS. DELIVERY STOCK EDMONTON. PRICES ARE QUOTED IN US DOLLARS. THANKS FOR YOUR ORDER. JOHN


Notes:
TERMS NET 30 DAYS ARO. EO46 7-9 WEEKS, E067 3-5 WEEKS,        OTHER THREE ITEMS ARE STOCK EDMONTON INVENTORY   PRICES ARE US $, GST EXTRA


Notes:
TERMS NET 30 DAYS. WE ARE QUOTING BOTH PART NUMBERS YOU SUPPLIED. DEL 2-4 WEEKS ARO.


Notes:
TERMS NET 30 DAYS. ITEMS ARE STOCK OR 2-4 WEEKS ARO.


Notes:
TERMS NET 30, DEL 2-4 WEEKS ARO SUBJECT TO PRIOR SALE


Notes:
TERMS NET 30. D078 IS STOCK, OTHER ITEMS ARE 6-8 WEEKS, ARO.


Notes:
TERMS NET 30 DAYS ARO. ALL ITEMS STOCK. OUR PART #S WITHOUT "M" IN THEM ARE SAME AS YOUR ITEMS


Notes:
TERMS 50% WITH ORDER, BALANCE NET 30 DAYS. DEL. 10-12 WEEKS ARO. GST EXTRA


Notes:
TERMS 50% WITH ORDER, 50% NET 30 DAYS. DEL 6-8 WEEKS ARO.


Notes:
TERMS 50% WITH ORDER. DEL 6 TO 8 WEEKS ARO


Notes:
TERMS: QUOTE IS FIRM FOR 120 DAYS AND REQUIRES A 50% DEPOSIT AT TIME OF ORDER. YOUR NET IS  LESS 10%  IF 1 SET OF PARTS ORDERED. IF 3-4 SETS ORDERED, THEN PRICES ARE LESS 15% FOR NET. DELIVERY IS 14-16 WEEKS ON FIRST ORDER DUE TO PRODUCTION OF TOOLING.  THANKS FOR YOUR ORDER, JOHN STROME


Notes:
50% DEPOSIT REQUIRED WITH ORDER. ITEM # 1, $ 800.00 TOOLING CHARGE IF QUANTITY LESS THAN 4. AIR SHIP FREIGHT COSTS EXTRA, $ 5 TO 7 KG. DELIVERY BY AIR, 4 TO 5 WEEKS ARO.


Notes:
TERMS: PRICES ARE NET 30 WITH DELIVERY 5-6 WEEKS. THANKS, JOHN STROME


Notes:
TERMS: PRICES QUOTED REQUIRE A 50% DEPOSIT AT TIME OF ORDER.  BALANCE NET 30 DAYS. DELIVERY IS 1 STOCK OF AGITATOR, BALANCE OF ORDER IS 6-8 WEEKS.


Notes:
TERMS: PRICES ARE NET 30 DAYS. DELIVERY IS STOCK TO 8 WEEKS. THANKS FOR YOUR ORDER, JOHN.


Notes:
TERMS: ADVANCE PAYMENT, 5 PARTS IN STOCK. WILL SHIP AT TIME OF PAYMENT. THANKS FOR YOUR ORDER.


Notes:
TERMS: PRICES QUOTED REQUIRE A 50% DEPOSIT AT START. DELIVERY IS STOCK TO 18 WEEKS. A MINIMUM QUANTITY OF 5 IS REQUIRED FOR ALL 28% CHROME PARTS AND THE GAP RINGS. WE WILL PURCHASE THE FIRST ITEM FROM THE OEM AT A LOSS AND THEN PRODUCE 4 EACH WITH OUR TOOLING TO FILL BALANCE OF 28% CHROME PARTS ORDER. THANKS FOR YOUR CONFIDENCE IN OUR PRODUCTS AND SERVICES. JOHN M


Notes:
TERMS: PRICES REQUIRE A 50% DEPOSIT AT START. DELIVERY IS STOCK ASIA EXCEPT FOR ASSEMBLY TIME AND TEST. ARRIVE VANCOUVER IN 5-6 WEEKS. NOTE: REQUIRE LAURIE AT CAC TO ADVISE MOTOR SIZE RUNNING WITH THESE PUMPS SO WE CAN SELECT PROPER BASE AND BELT GUARDS. PRICES FOR THESE ITEMS NOT INCLUDED. THANKS JOHN


Notes:
TERMS: PRICES ARE NET 30 DAYS, DELIVERY IS 2-3 WEEKS.


Notes:
TERMS: PRICES ARE NET 30 DAYS, DELIVERY IS 6-8 WEEKS. THANKS FOR YOUR ORDER.


Notes:
Terms:  Prices are net 30 days.  Delivery is: C2058A05 (1 in stock), C2036MR33 (1 in stock R26 material), E4147R38 (1 in stock A05 material).  Note:  if stock not used then delivery is 6-8 weeks.  Thank you for your order, Karen.


Notes:
TERMS: PRICES ARE NET 30 DAYS. DELIVERY IS 5-6 WEEKS. THANKS FOR YOUR ORDER, JOHN.


Notes:
TERMS: PRICES REQUIRE A 50% DEPOSIT. PARTS ARE STOCK TO 10 WEEKS DELIVERY. NOTE: PARTS LISTED ARE 1 COMPLETE WET-END SET FOR A MODEL QHH SIZE 3/2 PUMP


Notes:
TERMS: PRICES REQUIRE A 50% DEPOSIT. PARTS ARE STOCK TO 10 WEEKS DELIVERY. NOTE: SOME PARTS LISTED ARE INTERCHANGEABLE WITH 4/3 CAH & DAH. COMPLETE WET SETS ARE SHOWN. THANKS JOHN


Notes:
TERMS: PRICES REQUIRE A 50% DEPOSIT AT TIME OF ORDER. DELIVERY IS STOCK TO 8 WEEKS. NOTE: A COMPLETE SET OF PARTS TO REPAIR 1 WET END OF A 6/4DAH STANDARD PUMP


Notes:
TERMS: PRICES REQUIRE A 50% DEPOSIT AT START OF ORDER. BALANCE NET 30 DAYS. DELIVERY IS STOCK TO 8 WEEKS. NOTE: PARTS QUOTE WILL REPAIR 1 STANDARD 8/6EAH WET END. THANKS FOR YOUR ORDER, JOHN


Notes:
TERMS: PRICES REQUIRE A 50% DEPOSIT AT START OF ORDER. BALANCE NET 30 DAYS. DELIVERY IS STOCK TO 8 WEEKS. NOTE: PARTS QUOTE WILL REPAIR 1 STANDARD 10/8FAH WET END. THANKS FOR YOUR ORDER, JOHN


Notes:
TERMS: PRICES REQUIRE A 50% DEPOSIT AT START OF ORDER. BALANCE NET 30 DAYS. DELIVERY IS STOCK TO 8 WEEKS. NOTE: PARTS QUOTE WILL REPAIR 1 STANDARD 12/10STAH WET END. THANKS FOR YOUR ORDER, JOHN


Notes:
TERMS: PRICES ARE NET 30 DAYS. DELIVERY 2-3 WEEKS. THANKS FOR YOUR ORDER. JOHN


Notes:
TERMS: PRICES ARE NET 30 DAYS. MOST ITEMS ARE STOCK EDMONTON, BUT TO FILL THE ORDER BALANCE WILL HAVE TO COME FROM PORTLAND. DELIVERY IS STOCK TO 6 WEEKS.


Notes:
TERMS: PRICES ARE NET 30, 3 WEEKS DELIVERY, PORTLAND. THANKS FOR YOUR ORDER. JOHN


Notes:
TERMS: PRICE IS NET 30 DAYS, DELIVEYR 4-6 WEEKS.


Notes:
TERMS: PRICES QUOTED REQUIRE A 50% ADVANCE DEPOSIT FOR SPECIAL MADE PRODUCTS. DELIVERY IS 14-16 WEEKS AFTER RECEIPT OF SAMPLE IMPELLER TO OUR WAREHOUSE IN CHINA. THANKS FOR YOUR PURCHASE ORDER.


Notes:
TERMS: PRICES ARE NET 30 DAYS WITH APPROVED CREDIT. DELIVERY IS 3-4 WEEKS. THANKS FOR YOUR ORDER.


Notes:
TERMS: PRICES ARE  NET 30 DAYS, STOCK EDMONTON. THANKS FOR YOUR ORDER, JOHN


Notes:
TERMS: PRICE REQUIRE A 50% DEPOSIT AT START AND A COPY OF CUSTOMER DRAWINGS TO CONFIRM DIMENSIONS CHANGED FOR SEAL. BALANCE OF 50% NET 45 DAYS. DELIVERY IS 12-14 WEEKS ON FIRST ORDER. THANKS FOR YOUR ORDER, JOHN M. STROME


Notes:
TERMS 50% WITH ORDER, 50% UPON DELIVERY. DEL 6-8 WEEKS ARO, SUBJECT TO WORK IN PROGRESS AT TIME OF ENTRY


Notes:
TERMS: PRICES ARE NET 30 DAYS WITH APPROVED CREDIT. DELIVERY IS 2-3 WEEKS. THANKS FOR YOUR ORDER. JOHN


Notes:
TERMS: PRICES ARE NET 30 DAYS. DELIVERY IS 6-8 WEEKS ARO. THANKS FOR YOUR ORDER, JOHN.


Notes:
TERMS, AS ARRANGED BETWEEN MICHAEL FOR SHIPPING TO PROGRESSIVE SEALING. THANK YOU FOR YOUR ORDER


Notes:
TERMS 50% DEPOSIT WITH ORDER. FOB WASHOUGAL WASH. PIECES SHALL BE MACHINE MATED BEFORE SHIPPING. READY TO SHIP, 2-3 WEEKS ARO.


Notes:
TERMS: PRICES REQUIRE A 50% DEPOSIT BALANCE NET 30 DAYS. SEE NOTE IN EMAIL SHOWING WHICH ITEMS ARE STOCK DELIVERY. BALANCE OF ITEMS WOULD BE 6-8 WEEKS. THANKS FOR YOUR ORDER


Notes:
TERMS: PRICES QUOTED REQUIRE AN ADVANCE DEPOSIT OF 25% ON ORDER SIZES OVER $5000.00 AND 50% ON ORDER SIZES OVER $10,000.00 NET. DELIVERY IS 5-6 WEEKS ARO. THANKS FOR YOUR VALUED ORDERS. JOHN


Notes:
TERMS: PRICES REQUIRE A 50% DEPOSIT AT START OF ORDER BY T.T., A 40% T.T. AND BALANCE OF 10% NET 90 DAYS. THANKS FOR YOUR ORDER.


Notes:
TERMS: PRICES REQUIRE A 50% DEPOSIT AT TIME OF ORDER. BALANCE IS NET 30 DAYS. DELIVERY IS 4-6 WEEKS. THANKS FOR YOUR ORDER.


Notes:
TERMS: PRICE IS NET 30 DAYS, DELIVERY IS 3-4 WEEKS. NOTE: PUMP DOES NOT INCLUDE MOTOR. DISCHARGE PIPE IS INCLUDED NEOPRENE LINED. SUCTION PIPE NOT INCLUDED. THANKS, JOHN.


Notes:
TERMS: PRICES ARE NET 30 DAYS, DELIVERY IS STOCK TO 2 WEEKS. ITEMS D075 & D109 ARE STOCK. OTHER 2 ITEMS STOCK CHINA. THANKS JOHN


Notes:
TERMS: PRICES QUOTED REQUIRE A 50% DEPOSIT, BALANCE NET 30 DAYS. DELIVERY IS STOCK TO 8 WEEKS. THANKS FOR YOUR ORDER. NOTE:  2 ONLY G10083A05 ARE STOCK.


Notes:
TERMS: PRICES ARE NET 30 DAYS. STOCK TO 5 WEEKS DELIVERY. ALL ITEMS IN STOCK EXCEPT D3110A05 VOLUTE CASE.


Notes:
TERMS: PRICES ARE NET 30 DAYS. DELIVERY IS 5-6 WEEKS. THANKS FOR YOUR ORDER. JOHN


Notes:
TERMS: PRICES QUOTED REQUIRE A 50% DEPOSIT, BALANCE NET 30 DAYS. NOTE: PRODUCTION OF D.I. PARTS IS 7-8 DAYS EMERGENCY PRICING. PRODUCTION OF SPACER CPLNG IS 25 DAYS. BALANCE OF ORDER IS STD DLVRY 7-9 WEEKS.


Notes:
TERMS: PRICES REQUIRE A 50% DEPOSIT, BALANCE NET 30 DAYS. PRODUCTION IS 7-8 DAYS EMERGENCY PRICING. NOTE: PLEASE ADVISE IF TO AIR OR PICKUP BY BHP. AIR SHIPMENT CHARGES AT COST, PREPAID AND BILLED.


Notes:
TERMS: PRICES QUOTED REQUIRE A 50% DEPOSIT, BALANCE NET 30 DAYS. STD. DELIVERY IS 7-9 WEEKS.


Notes:
TERMS: PRICES REQUIRE A 50% DEPOSIT AT TIME OF ORDER. DELIVERY IS 7-8 WEEKS. NOTE: PRODUCTION TIME IS 2 WEEKS. THANKS FOR YOUR VALUED ORDER. JOHN


Notes:
TERMS: PRICE REQUIRES A 50% DEPOSIT AT START AND A COPY OF CUSTOMER DRAWINGS TO CONFIRM DIMENSIONS CHANGED FOR SEAL. BALANCE OF PAYMENT IS NET 45 DAYS. DELIVERY IS 12-14 WEEKS ON FIRST ORDER. THANKS FOR YOUR ORDER, J. M. STROME


Notes:
TERMS: PRICES QUOTED ARE IN EURO DOLLARS. A CONFIRMED NEGOTIABLE L.C. OR 50% DEPOSIT AT TIME OF ORDER. BALANCE BY T.T. AT TIME OF SHIPMENT. NOTE: A MINIMUM ORDER OF 2 PIECES EACH ITEM IS REQUIRED. DELIVERY ON FIRST ORDER IS 14-16 WEEKS. THANKS FOR YOUR INQUIRY, JOHN


Notes:
TERMS: PRICES ARE NET 30 DAYS, FOB WASHOUGAL WA. DELIVERY IS 3-6 WEEKS. THANKS FOR YOUR ORDERS, JOHN.


Notes:
TERMS: PRICE REQUIRES A 50% DEPOSIT AT START. BALANCE OF 50% NET 45 DAYS. DELIVERY IS 10-12 WEEKS. THANKS FOR YOUR ORDER. JOHN M. STROME


Notes:
TERMS: PRICES ARE NET 30 DAYS. PARTS ARE ALL STOCK EXCEPT THE GREASE RETAINER WHICH IS 3-4 WEEKS. THANKS FOR YOUR ORDER, JOHN.


Notes:
TERMS: PRICES ARE NET 30 DAYS, LESS 2% 10. DELIVERY IS STOCK TO 5 WEEKS. NOTE: MUST VERIFY WE HAVE A DRAWING ON PART NUMBER D062XL-10.


Notes:
TERMS: PRICES REQUIRE A 50% DEPOSIT. BALANCE IS NET 30 DAYS WITH APPROVED CREDIT. DELIVERY IS STOCK TO 8 WEEKS. NOTE: WE HAVE 3 F6083R26 BUSHINGS IN STOCK.


Notes:
TERMS: PRICES ARE NET 30 DAYS, FOB WASHOUGAL. PARTS ARE STOCK DELIVERY. THANKS, JOHN


Notes:
TERMS: NEGOTIABLE L.C. DELIVERY FOR FIRST CASING SET IS 14-16 WEEKS TO ALLOW TIME FOR PRODUCING PATTERN TOOLING. MINIMUM ORDER IS 2 CASINGS TO JUSTIFY ABSORBING THE PATTERN TOOLING COSTS.


Notes:
TERMS: PRICES REQUIRE 100% ADVANCE AT TIME OF ORDER. DELIVERIES: 14/12 PARTS ARE STOCK CHINA INLAND, REQUIRE 10 DAYS TO GET TO SEAPORT AND 21 DAYS TO PORTLAND USA. 16/14 PARTS WILL TAKE 6 WEEKS TO MANUFACTURE, 10 DAYS TO SEAPORT AND 21 DAYS TO PORTLAND USA. (TO HOLD THESE TIMES AND PRICES, A COMPLETE ORDER MUST BE PLACED NOT LATER THAN MARCH 4TH. THANKS FOR YOUR ORDERS, JOHN.


Notes:
TERMS: PRICES ARE NET 30 DAYS, DELIVERY STOCK TO 3 WEEKS. NOTE: E025, E109 & E075 ARE STOCK IN WASHOUGAL. THANKS, JOHN.


Notes:
TERMS: PRICES QUOTED REQUIRE A 50% T.T. TRANSFER AT START OF ORDER, BALANCE IS TO BE PAID AT TIME OF SHIPMENT. NOTE: ON ORDER QUANTITIES OF 5 EACH, WE CAN LOWER THE PRICES BY 50%. ON THIS QUANTITY ORDER, WE WILL MANUFACTURE IN ASIA. THANKS FOR YOUR ORDER.


Notes:
TERMS: PRICES QUOTED REQUIRE A 50% DEPOSIT. BALANCE IS NET 45 DAYS. DELIVERY IS 10-12 WEEKS ON FIRST ORDER TO ALLOW FOR PATTERN TOOLING. MINIMUM ORDER IS 2 EACH ON CAST ITEMS. PARTS NOT QUOTED REQUIRE A DRAWING. NOTE: 28% CHROME IRON IS ASTM A532 TYPE II MATERIAL.


Notes:
TERMS: PRICES ARE NET 30 DAYS. DELIVERY IS STOCK TO 3 WEEKS. ITEMS C118, 2 IN STOCK, D117, O IN STOCK, BALANCE STOCK. THANKS FOR YOUR ORDER.


Notes:
TERMS: PRICES ARE IN EURO DOLLAR AND REQUIRE 50% ADVANCE WIRE TRANSFER AT TIME OF ORDER, BALANCE BY T.T. AT TIME OF DELIVERY. DELIVERY IS 5-6 WEEKS.


Notes:
TERMS: PRICES QUOTED ARE IN EURO DOLLARS. DELIVERY IS STOCK TO 3 WEEKS. ITEMS D024 & D061 STOCK EDMONTON, ITEM D046 STOCK WASHOUGAL, ITEM D062 NOT AVAILABLE.


Notes:
TERMS: PRICES ARE NET 30 DAYS, STOCK DELIVERY WASHOUGAL. THANKS, JOHN


Notes:
TERMS: Prices are net 30 days. Delivery is 4-6 weeks. Thanks for your order. John


Notes:
TERMS: PRICES QUOTED ARE IN EURO DOLLARS. A 50% DEPOSIT IS REQUIRED ON ALL CAST PRODUCTS, BALANCE OF ITEMS IS NET 30. DELIVERY IS VARIED FROM 8 WEEKS TO 14 WEEKS. NOTE: WE REQUIRE MORE DATA ON SOME ITEMS. JOHN


